MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 Steet, Room 208 BOARD AND CODE ADMINISTRATION DIVISION Miami, Floida 33175-2474 T (786) 315-2590 F (786) 315-2599 www.miamidade.gov/pea NOTICE OF ACCEPTANCE (NOA) Ceamica Veea Lanza S/N 15685 Mesia (Couňa) Spain SCOPE: This NOA is being issued unde the applicable ules and egulations govening the use of constuction mateials. The documentation submitted has been eviewed and accepted by Miami-Dade County RER - Poduct Contol Section to be used in Miami Dade County and othe aeas whee allowed by the Authoity Having Juisdiction (AHJ). This NOA shall not be valid afte the expiation date stated below. The Miami-Dade County Poduct Contol Section (In Miami Dade County) and/o the AHJ (in aeas othe than Miami Dade County) eseve the ight to have this poduct o mateial tested fo quality assuance puposes. If this poduct o mateial fails to pefom in the accepted manne, the manufactue will incu the expense of such testing and the AHJ may immediately evoke, modify, o suspend the use of such poduct o mateial within thei juisdiction. RER eseves the ight to evoke this acceptance, if it is detemined by Miami-Dade County Poduct Contol Section that this poduct o mateial fails to meet the equiements of the applicable building code. This poduct is appoved as descibed heein, and has been designed to comply with the Floida Building Code including the High Velocity Huicane Zone of the Floida Building Code. DESCRIPTION: Veea Flat Gade 1 LABELING: Each unit shall bea a pemanent label with the manufactue's name o logo, city, state and following statement: "Miami-Dade County Poduct Contol Appoved", unless othewise noted heein. RENEWAL of this NOA shall be consideed afte a enewal application has been filed and thee has been no change in the applicable building code negatively affecting the pefomance of this poduct. TERMINATION of this NOA will occu afte the expiation date o if thee has been a evision o change in the mateials, use, and/o manufactue of the poduct o pocess. Misuse of this NOA as an endosement of any poduct, fo sales, advetising o any othe puposes shall automatically teminate this NOA. Failue to comply with any section of this NOA shall be cause fo temination and emoval of NOA. ADVERTISEMENT: The NOA numbe peceded by the wods Miami-Dade County, Floida, and followed by the expiation date may be displayed in advetising liteatue. If any potion of the NOA is displayed, then it shall be done in its entiety. INSPECTION: A copy of this entie NOA shall be povided to the use by the manufactue o its distibutos and shall be available fo inspection at the job site at the equest of the Building Official. This NOA evises NOA# 14-0107.03 and consists of pages 1 though 5. The submitted documentation was eviewed by Alex Tigea. Expiation Date: 04/24/19 Appoval Date: 05/04/17 Page 1 of 5
ROOFING ASSEMBLY APPROVAL Categoy: Sub Categoy: Mateial: 1. SCOPE Roofing Roofing s Clay This appoves a oofing system using Veea Flat Gade 1 manufactued by Ceamica Veea in La Couňa, Spain and is distibuted by Ceamica Veea, USA Cop., as descibed in Section 2 of this Notice of Acceptance. Fo locations whee the pessue equiements, as detemined by applicable Building Code does not exceed the design pessue values obtained by calculations in compliance with RAS 127 using the values listed in section 4 heein. The attachment calculations shall be done as a moment based system. 2. PRODUCT DESCRIPTION Manufactued by Applicant Dimensions Veea Flat Gade 1 L = 15.65 W = 9.96 Thickness: 0.45 Tim Pieces Length: vaies Width: vaies vaying thickness 2.1 MANUFACTURING LOCATION 2.1.1. Mesia (La Couňa) Espaňa Test Specifications ASTM C1167 Type III Gade 1 ASTM C1167 Poduct Desciption Flat pofile clay oof tile. Fo diect deck, adhesive set applications. Accessoy tim, clay oof pieces fo use at hips, akes, idges and valley teminations manufactued fo each tile pofile. 2.2 EVIDENCE SUBMITTED Test Agency Test Identifie Test Name/Repot Date Ameican Test Lab of South RT1220.01-13 ASTM C 1167 12/30/13 Floida RT0131.01-14 TAS 101 02/24/14 RT0707.03-16 ASTM C 1167 07/14/16 3. LIMITATIONS: 3.1 Fie classification is not pat of this acceptance. 3.2 Fo mota o adhesive set tile applications, a static field uplift test in accodance with TAS 106 may equied, efe to applicable building code. 3.3 Applicant shall etain the sevices of a Miami-Dade County Cetified Laboatoy to pefom quately test in accodance with TAS 112, appendix A. Such testing shall be submitted to the Building and Neighbohood Compliance Depatment Poduct Contol Section fo eview. 3.4 Minimum undelayment shall be in compliance with the applicable Roofing Applications Standads listed section 4.1 heein. 3.5 30/90 hot mopped undelayment applications may be installed pependicula to the oof slope unless stated othewise by the undelayment mateial manufactues published liteatue. 3.6 This acceptance is fo wood deck applications. Minimum deck equiements shall be in compliance with applicable building code. Expiation Date: 04/24/19 Appoval Date: 05/04/17 Page 2 of 5
4. INSTALLATION 4.1 Veea Flat Gade 1 and its components shall be installed in stict compliance with Roofing Application Standad RAS-120. 4.2 Data Fo Attachment Calculations. Table 1: Aveage Weight (W) and Dimensions (l x w ) Pofile Weight-W (lbf) Length-l (ft) Width-w (ft) Veea Flat Gade 1 5.9 1.304 0.83 Pofile Table 2: Aeodynamic Multiplies - λ (ft 3 ) λ (ft 3 ) Batten Application λ (ft 3 ) Diect Deck Application Veea Flat Gade 1 N/A 0.21 Pofile Veea Flat Gade 1 Table 3: Restoing Moments due to Gavity - M g (ft-lbf) 2":12" 3":12" 4":12" 5":12" 6":12" 7":12" o Geate Diect Deck Diect Deck Diect Deck Diect Deck Diect Deck Diect Deck 3.82 3.77 3.71 3.63 3.54 3.44 Pofile Table 6: Attachment Resistance Expessed as a Moment - M f (ft-lbf) fo Single Patty Adhesive Set Systems Application Minimum Attachment Resistance Veea Flat Gade 1 ICP Adhesives Polyset AH-160 38.71 1 1 Medium paddy placement weight 24.6 gams (appox. 2 x 10 paddy) of ICP Adhesives Polyset AH-160 Adhesive AH-160. Expiation Date: 04/24/19 Appoval Date: 05/04/17 Page 3 of 5
5. LABELING 5.1 All tiles shall bea the impint o identifiable making of the manufactue's name o logo as detailed below, o following statement: "Miami-Dade County Poduct Contol Appoved". 6. BUILDING PERMIT REQUIREMENTS: LABEL FOR VEREA FLAT GRADE 1 (LOCATED ON THE SIDE OF TILE) 6.1 Application fo building pemit shall be accompanied by copies of the following: 6.1.1 This Notice of Acceptance. 6.1.2 Any othe documents equied by Building Official o Applicable building code in ode to popely evaluate the installation of this system. Expiation Date: 04/24/19 Appoval Date: 05/04/17 Page 4 of 5
PROFILE DRAWING VEREA FLAT GRADE 1 END OF THIS ACCEPTANCE Expiation Date: 04/24/19 Appoval Date: 05/04/17 Page 5 of 5