Mini-Racking Proposals When ordering, model numbers must be completed as follows : Starter Add-on unit unit BOLTED uprights D A WELDED uprights E B S Steel decking W Wire decking Without decking EXAMPLE : SR 500 Example : S R D 5 0 0 S for a starter unit bolted uprights, including steel decking. Mini-Racking with Choice of Decking The beams are designed to receive steel shelves (SR40, SH0), wire decking (SR4) or wood panels at least 5 8" thick. Steel To order a unit with steel shelves, complete the product number with an S. Wire To order a unit with wire shelves, complete the product number with a W; Not compatible with 8" depth. For Wood Panels To order a unit without decking (Ex.: for use with wood panels) leave the product number as is. SRE57S Starter SRB57S Add-on SRE57W Starter SRB57W Add-on SRE57 Starter SRB57 Add-on Mini-Racking with Medium-Duty Beams Dimensions Number of Levels W D H 3 4 8" SR_500_ SR_50_ SR_500_ SR_50_ * SR_5003_ SR_503_ * SR_5004_ SR_504_ 8" SR_5005_ SR_505_ SR_5006_ SR_506_ * SR_5007_ SR_507_ * SR_5008_ SR_508_ 8" SR_505_ SR_507_ SR_505_ SR_507_ * SR_5053_ SR_5073_ * SR_5054_ SR_5074_ 8" SR_5055_ SR_5075_ 60" SR_5056_ SR_5076_ * SR_5057_ SR_5077_ * SR_5058_ SR_5078_ SR_5080_ * 99" SR_508_ * SR_508_ Dimensions Number of Levels W D H 3 4 8" SR_50_ SR_5_ SR_50_ SR_5_ * SR_503_ SR_53_ * SR_504_ SR_54_ 8" SR_505_ SR_55_ 7" SR_506_ SR_56_ * SR_507_ SR_57_ * SR_508_ SR_58_ SR_530_ * 99" SR_53_ * SR_53_ *Models are compatible with double shelving units with same depth. Medium-Duty Beams Number of Tie Bars Depth Steel Wire Wood Panels 8" ND 3 SRE507S Tie bars Models include to 3 tie bars, depending on their dimensions. NOTE For capacity chart. 89 84 rousseaumetal.com info@rousseaumetal.com
Mini-Racking Proposals Mini-Racking with Heavy-Duty Beams Dimensions D H 8" * * 8" 7" * * * 99" * 8" * * 8" 96" * * * 99" * W Number of Levels 3 4 SR_55_ SR_57_ SR_55_ SR_57_ SR_553_ SR_573_ SR_554_ SR_574_ SR_555_ SR_575_ SR_556_ SR_576_ SR_557_ SR_577_ SR_558_ SR_578_ SR_580_ SR_58_ SR_58_ SR_50_ SR_5_ SR_50_ SR_5_ SR_503_ SR_53_ SR_504_ SR_54_ SR_505_ SR_55_ SR_506_ SR_56_ SR_507_ SR_57_ SR_508_ SR_58_ SR_530_ SR_53_ SR_53_ Heavy-Duty Beams Tie bars Width Models include to 3 tie bars, depending on their dimensions. NOTE For capacity chart. 7" 89 96" *Models are compatible with double shelving units with same depth. Depth 8" 48 8" 48 Steel Number of Tie Bars Wire Wood Panels ND 3 3 ND 3 3 Mini-Racking for Standard-Sized Wood Panels Model dimensions are designed to reduce the need to cut wood panels; 4 long-span levels with heavy-duty beams; Bolted uprights (require assembly). Starter SRD703 SRD703 SRD7033 SRD7034 SRD7035 SRD7036 SRD7037 SRD7038 SRA703 Add-on SRD703 Starter Add-On SRA703 SRA703 SRA7033 SRA7034 SRA7035 SRA7036 SRA7037 SRA7038 WxDxH 7" x 48½" x 7" x 48½" x 99" 96½" x x 96½" x x 99" 96½" x x 96½" x x 99" 96½" x 48½" x 96½" x 48½" x 99" NOTE Wood decking are not provided by Rousseau. SRE5376 End-users:.866.463.470 Distributors:.800.463.47 85
Mini-Racking Accessories Hanging Rail SR6 Hook for Rail 300 lb. capacity per rail; Installs on Spider post with hooks, no bolts; Includes security mechanism to keep from accidentally unhooking; 3 installation positions possible : one in the middle and two closer to the edges; Compatible with SR63-0 hooks (not included); Hooks pivot once installed on the rail. They can be put on and taken off the rail at all times, even when the rail is in place on the adaptors; Rail and adaptors in galvanized steel; Note : When doing a side-to-side combination with a mini-racking and a back-to-back shelving, call the customer service department for compa-tibility of SR6 hanging rails. Single Rail SR6-6080 SR6-6040 SR6-60360 SR6-780 SR6-740 SR6-7360 SR6-9680 SR6-9640 SR6-96360 WxD 60" x 8" 60" x 60" x 7" x 8" 7" x 7" x 96" x 8" 96" x 96" x Double Rail SR6-6040 SR6-60360 SR6-740 SR6-7360 SR6-9640 SR6-96360 SR63 50 lb. capacity per hook; Hooks pivot once installed on the SR6 rail; Can be put on and taken off even when the rail is in place on the adaptors. SR63-0 DxH ½" x 5" WxD 60" x 60" x 7" x 7" x 96" x 96" x SRE4543M Label Holder NC3 Attaches to SR medium-duty or SR heavy-duty beams; For use with self-adhesive labels only. NC3-360 NC3-40 NC3-480 NC3-600 NC3-660 NC3-70 NC3-960 Laminated Hardwood Top for Shelving 86 Back-to-Back Spacers Width 4" 60" 66" 7" 96" SR48 Used to attach two sections of Mini-Racking, back-to-back, with a " space between posts for beam adjustment. SR48 SR90 Wood Top Support SH74 Designed to be installed between two shelving units; Must be ordered with a pair of SH74 supports or used with a storage unit with work surface application. Installed with hook system, without tools, onto the sides of SH or SR uprights; Designed to support a SR90 laminated hardwood top between two shelving units. SR90-604A SR90-74A SR90-964A SH74-4 WxD 60" x 7" x 96" x rousseaumetal.com info@rousseaumetal.com Width
Mini-Racking Accessories SR6 Double Divider Divides those parts that lean vertically against the back of the Mini-racking; Installs on medium-duty (SR) or heavy-duty (SR) beams; Divider can be adjusted laterally (left to right) without tools; Compatible with deep shelving and deeper. SR6-40 Depth SR60 Supports parts and boxes that are stored vertically in a Mini-racking unit. Parts lean against D shape of the divider; Attaches on two medium-duty (SR) or two heavy-duty beams (SR); Space between the two beams must be 4" c/c; Divider can be adjusted laterally (left to right) without tools; Compatible with deep shelving and deeper; Designed to support lateral load. SR60-45 Full Height HD Utility Panel Single Divider DxH x 5" SH69 HD utility panel for end of aisle unit; Holes at every " c/c; Fast and easy hook-on assembly; Polished look; Available in 4 widths: '' (9 holes), 5" (3 holes), 8" (5 holes) and ( holes) Compatible with both light and heavy-duty hooks : WM9F, WM9G, WM9H, WM9J, WM9A and WM9B; Also compatible with WM9C, WM9D, WM9M, WM9N supports and WM shelf; Capacity : 50 lb./square foot, maximum of 500 lb. per panel, evenly distributed load; Compatible with certain multi-level shelving applications. Contact our customer service; Complete the product number by choosing the desired depth : 5", 8", or. SH69-5 SH69-75 SH69-87 Height 5" SRE454M Side Utility Panel SH68 The SH68 utility panel for shelving installs on either the inside or the outside upright; Simple assembly, no tools required; Available in 4 widths: " (8 holes), 5" ( holes), 8" (4 holes) and ( holes) Compatible with both light and heavy-duty hooks : WM9F, WM9G, WM9H, WM9J, WM9A and WM9B; Compatible with WM9C, WM9D, WM9M and WM9N supports; Compatible with WM shelf; Capacity : 50 lb./square foot, maximum of 300 lb. per panel, evenly distributed load; Complete the product number by choosing the desired depth : 5", 8",, or. SH68-4 SH68-0 SH68-3 Height 4" 0" 3" End-users:.866.463.470 Distributors:.800.463.47 87
Mini-Racking Components Structural Components Post SR0 Welded Mini-Racking Upright Assembly SR3 Tubular T-shape; up to 7 fixing zones; Perforations on front side, every " c/c, for beam adjustment; 4 gauge steel. Height SR0-039 39" SR0-05 5" SR0-075 SR0-087 SR0-099 99" SR0- " SR0-3 3" Two heavy-duty ladder braces, factory welded onto two universal posts; Other heights available. Please contact your cust-omer service representative. D x H SR3-8075 8" x SR3-8087 8" x SR3-4075 x SR3-4087 x SR3-4099 x 99" SR3-30075 30" x SR3-30087 30" x SR3-30099 30" x 99" SR3-36075 x SR3-36087 x SR3-36099 x 99" SR3-48075 x SR3-48087 x SR3-48099 x 99" R5XEE-400 Mini-Racking Ladder Braces SR30 / SR3 Single ladder brace for 5" to depths Double, interlocked ladder brace for 30" to 48 /" depths Recommendations: pair per upright assembly up to 99" in height For upright assemblies over than 99" in height, please contact your customer service representative; For depths of 30",, and 48 ½", ladder braces interlock as shown. Pairs of ladder braces supplied with these models are double ladder braces. Depth SR30-5 5" SR30-6 6" SR30-8 8" SR30-4 SR30-30 30" SR30-3 3" SR30-36 SR30-48 SR3-480* 48 ½" * The SR3 ladder brace is used to accommodate D wood panels without cutting. NOTE 5", 6", 30" and 3" ladder braces are suitable for record storage. 9 88 rousseaumetal.com info@rousseaumetal.com
Mini-Racking Components Beams and Tie Bars Medium-Duty Beams 4 gauge steel; Attach to the front of the post. Height adjustment every " c/c; Held in place with two safety clips. W x H SR-36 x " SR-4 4" x " SR-48 x " SR-60 60" x " SR-66 66" x " SR-7 7" x " NOTE 4" and 66" beams are suitable for record storage. SR 9 Medium-Duty Tie Bar NOTE 5", 6", 30" and 3" tie bars are suitable for record storage. 9 SR5 / SR6 Hook to the inside of SR beams; Made in galvanized steel. Depth SR5-5 5" SR5-6 6" SR5-8 8" SR5-4 SR5-30 30" SR5-3 3" SR5-36 SR5-48 SR6-480* 48 ½" * The SR6 tie bar is used with SR3 ladder braces to accommodate a D wood panel without cutting. Beam Capacity Chart *Shelving load capacity tests are based on ANSI MH8. Shelving Manufacturer Association (SMA) standards. Capacities incorporate a safety factor and are valid for an equally distributed load. Capacities are indicated in pounds. tie bar tie bars Decking Type Wood Decking * Steel Decking * Wire Decking Medium-Duty Beams Width Number of Depth 4" 60" 66" 7" Tie Bars 5" to 000 000 975 800 75 650 30" to 3" 075 05 95 775 700 65 850 875 900 750 700 65 875 85 775 775 750 650 3 5" to 900 900 900 800 750 650 30" to 5 5 000 800 750 650 to 600 700 800 800 750 650 Heavy-Duty Beams 3 tie bars Decking Type Wood Decking * Steel Decking * Wire Decking Width Number of Depth 60" 7" 96" Tie Bars 5" à 650 600 5 30" à 3" 850 575 5 750 600 5 5 5 5 3 5" à 350 350 5 30" à 95 600 5** à 000 00 00** **96" x dimensions with steel decking or wire decking require tie bars. Heavy-Duty Beams SR / SR3 Heavy-Duty Tie Bar SR7 / SR8 gauge steel; Attach to the front of the post. Height adjustment every " c/c; Held in place with two safety clips. W x H SR-60 60" x ½" SR-7 7" x ½" SR-96 96" x ½" SR3-96* 96 ½" x ½" * SR3 beams can accommodate a 96" wide panel without cutting. Hook to the inside of SR and SR3 beams; Made in galvanized steel. Depth SR7-5 5" SR7-8 8" SR7-4 SR7-30 30" SR7-3 3" SR7-36 SR7-48 SR8-480* 48 ½" * The SR8 tie bar is used with SR3 ladder braces to accommodate a D wood panel without cutting. End-users:.866.463.470 Distributors:.800.463.47 89
Mini-Racking Components Mini-Racking Decking Steel Decking SH0 : Quadruple folds at the front and back and single fold on the sides; SR40 : Triple folds on the sides and single fold at the front and back; Steel decking improves shelf strength. ATTENTION SR40 / SH0 To order depending on unit dimensions and for each level of shelving, order the appropriate quantity of shelves and the product number(s) specified in the chart. Beam Width Upright 4" 60" 66" 7" 96" Assembly Qty Qty Qty Qty Qty Qty Qty 5" SR40-85 + SR40-85 + SR40-85 + SR40-85 SR40-45 SR40-45 SR40-45 SR40-45 3 SR40-45 4 SR40-45 6" SR40-86 + SR40-86 + SR40-86 + SR40-86 SR40-46 SR40-46 SR40-46 SR40-46 3 SR40-46 4 SR40-46 8" SR40-88 + SR40-88 + SR40-88 + SR40-88 SR40-48 SR40-48 SR40-48 SR40-48 3 SR40-48 4 SR40-48 SR40-84 30" SH0-308 3" SR40-83 SH0-368 SH0-488 + + + + + SR40-84 SR40-44 SH0-308 SH0-304 SR40-83 SR40-43 SH0-368 SH0-364 SH0-488 SH0-484 SR40-44 These dimensions are suitable for Mini-racking and back-to-back shelving. + SR40-84 SR40-44 4 SH0-30 4 SH0-305 SR40-43 + SR40-83 SR40-43 4 SH0-36 4 SH0-36 5 4 SH0-48 4 SH0-485 + + + + + SR40-84 SR40-44 SH0-308 SH0-304 SR40-83 SR40-43 SH0-368 SH0-364 SH0-488 SH0-484 3 SR40-44 4 SR40-44 4 SH0-308 4 SH0-304 3 SR40-43 4 SR40-43 4 SH0-368 4 SH0-364 4 SH0-488 4 SH0-484 Wire Decking SR4 ATTENTION Wire decking fabricated from steel rods welded together; Product meets fire code standards; Wire decking offers an interesting alternative to steel decking. To order depending on unit dimensions and for each level of shelving, order the appropriate quantity of shelves and the product number(s) specified in the chart. Beam Width Upright 4" 60" 66" 7" 96" Assembly Qty Qty Qty Qty Qty Qty Qty SR4-84 + SR4-84 + SR4-84 + SR4-84 SR4-44 SR4-44 SR4-44 SR4-44 3 SR4-44 4 SR4-44 30" SR4-830 + SR4-830 + SR4-830 + SR4-830 SR4-430 SR4-430 SR4-430 SR4-430 3 SR4-430 4 SR4-430 SR4-836 + SR4-836 + SR4-836 + SR4-836 SR4-436 SR4-436 SR4-436 SR4-436 3 SR4-436 4 SR4-436 SR4-848 + SR4-848 + SR4-848 + SR4-848 SR4-448 SR4-448 SR4-448 SR4-448 3 SR4-448 4 SR4-448 NOTE All these dimensions are suitable for Mini-racking and back to back shelving. Wood Decking Dimensions Dimensions of 30", and deep units are suitable for Mini-racking and two back-to-back units (except for 96 ½" W). Please see the S5 technical guide. Some dimensions are suitable for Mini-racking and back to back shelving. See the S5 technical guide. shelving shelving Mini-racking IMPORTANT Wood panels are not provided by Rousseau. Beams are designed for plywood or particleboard panels at least 5 8" thick. 90 rousseaumetal.com info@rousseaumetal.com
Proposals - Mobile Shelving SH When ordering, model numbersmust be completed as follows : H for posts with smooth finish surface R for posts with perforated surface SR BOLTED uprights D WELDED uprights E EXAMPLE: S 400M MOBILITY Example : S H D 4 0 0 M For a mobile shelving with smooth finish posts and bolted open uprights. Mobile Shelving Preconfigured models of mobile shelving units are shown here. Models include one shelving, the mobile base for Spider shelving and 4" casters, swivels with total-lock brake system and rigids; For the length of the base, add 3 3 6" to the nominal dimensions; Ex.: A wide base would be 5 3 6" wide total; Shelving comes with uprights, braces and BOX shelves; Capacity : 000 lb. per base; All models are quick and easy to assemble and can be disassembled when not in use; Note : For a side-to-side combination, see the mobile base for Mini-racking; Note : Not compatible with drawers or roll-out shelves in shelving and SH4/SH43/ SH9 and SH93 doors. Dimensions Number of shelves W D H 6 8" 63" S 400M 63" S 400M S 4003M 8" 63" S 4004M 4" 63" S 4005M S 4006M 8" 63" S 4007M 63" S 4008M S 4009M 93 SRE4003M SRE400M End-users:.866.463.470 Distributors:.800.463.47 9
Proposals - Mobile Mini-Racking MOBILITY When ordering, model numbers must be completed as follows : BOLTED uprights D WELDED uprights E EXAMPLE : SR 450 M S Steel decking W Wire decking Without decking Example : S R D 4 5 0 S M for a mobile unit bolted uprights, including steel decking. Mobile Mini-Racking Preconfigured models of mobile Mini-racking units are shown here. Can be ordered with steel decking, wire decking or without decking; Proposals include the mobile Mini-racking base with 4" casters, swivels with total-lock brake system and rigids; Models with a 30" or deeper base include the handle for mobile Mini-racking; to 7" wide units include medium duty-beams and 96" wide units include heavy-duty beams; To calculate the real length of the base, add 3 3 6" to the nominal dimensions; Ex.: A 60" wide base would be 63 3 6" wide total; Capacity : 000 lb. per base; All models are quick and easy to assemble and can be disassembled when not in use. SRE4545SM Steel To order a unit with steel shelves, complete the product number with an S. Wire To order a unit with wire shelves, complete the product number with a W; Not compatible with 8" depth. For Wood Panels To order a unit without decking (Ex.: for use with wood panels) leave the product number as is. SRE455WM Dimensions Number of Levels W D H 4 8" 63" SR_450_M 63" SR_450_M SR_4503_M 8" 63" SR_4504_M 4" 63" SR_4505_M SR_4506_M 8" 63" SR_4507_M 63" SR_4508_M SR_4509_M 63" SR_450_M SR_45_M 60" 30" 63" SR_45_M SR_453_M 63" SR_454_M SR_455_M 63" SR_456_M SR_457_M Dimensions Number of Levels W D H 4 63" SR_458_M SR_459_M 66" 30" 63" SR_450_M SR_45_M 63" SR_45_M SR_453_M 63" SR_454_M SR_455_M 63" SR_456_M SR_457_M 7" 30" 63" SR_458_M SR_459_M 63" SR_4530_M SR_453_M 63" SR_453_M SR_4533_M 63" SR_4534_M SR_4535_M 96" 30" 63" SR_4536_M SR_4537_M 63" SR_4538_M SR_4539_M 63" SR_4540_M SR_454_M NOTE Handles are not included in the 8" and deep proposals. 9 rousseaumetal.com info@rousseaumetal.com
Components Mobility Mobility Mobile Base for Spider Shelving SH99 Allows installation of casters under Spider shelving; Only offered for Rousseau Spider shelving; Compatible with 4" or 6" casters (sold separately); The shelving must have exactly the same dimensions as the base; No back-to-back combinations possible. For side-to-side combinations, see the Mini-racking mobile base; Compatible with 8" and deep,, 4" and wide shelving; The 8" deep base is compatible with 63" high shelving or less; The deep base is compatible with high shelving or less; Not compatible with the drawers or the roll-out shelves in shelving and SH4/SH43/SH9 and SH93 doors; Important : does not include casters, handle or bumpers. They must be ordered separately; Complete the product number by choosing the desired depth : 8" or. Width Real Width SH99-36 39 3 6" SH99-4 4" 45 3 6" SH99-48 5 3 6" Mobile Base for Mini-Racking SH99 Allows installation of casters under Mini-racking; Only offered for Rousseau Mini-racking; Compatible with 4" or 6" casters (sold separately); Compatible with, 30", and deep,, 60", 66", 7" and 96" wide and 63" and high Mini-racking; Side-to-side shelving or Mini-racking combinations are possible but they must have the same width : base (not compatible) 60" base (30" + 30") 66" base (not compatible) 7" base ( + ) 96" base ( + ); When doing a side-to-side combination, make sure to order an extra pair of rigid casters (under the adjoining posts); Back-to-back configuration is not possible; Important : does not include casters, handle or bumpers. They must be ordered separately; Complete the product number by choosing the desired depth :, 30", or. Width Real Width SH99-48 5 3 6" SH99-60 60" 63 3 6" SH99-66 66" 69 3 6" SH99-7 7" 75 3 6" SH99-96 96" 99 3 6" MOBILITY 4" Casters SB8 Choice of 3 types of casters : rigid, swivel, swivel with total-lock brake system (on wheel and swivel); Capacity : 40 lb. per caster; Total height : 5 8"; Dark gray polyurethane tread does not mark floors. Superior industrial quality casters; Install under the mobile base for shelving and Mini-racking : one per post. SB8-0 SB8-0 SB8-03 Type of Caster Rigid Swivel Swivel with total-lock brake system 6" Casters SB84 Choice of 3 types of casters : rigid, swivel, swivel with total-lock brake system (on wheel and swivel); Capacity : 900 lb. per caster; Total height : 7 "; Dark gray polyurethane tread insures silent functioning. Superior industrial quality casters; Install under the mobile base for shelving and Mini-racking : one per post. SB84-0 SB84-0 SB84-03 Type of Caster Rigid Swivel Swivel with total-lock brake system Mobile Shelving and Mini-Racking Handle SH97 Bumpers for Mobile Shelving and Mini-Racking SH98 Recommended for 30" deep or deeper Miniracking; The handle is fixed on the shelving or Miniracking ends on the uprights. The handle has to be installed horizontally; Complete the product number by choosing the desired depth : 8",, 30",, 4" and. SH97-0 Made of high density plastic; Color : gray; Installed on the 4 corners of the base to protect from impacts; Sold in kits of 4. SH98-0 End-users:.866.463.470 Distributors:.800.463.47 93