INOFIN FPO roofing membrane Plasticizer free and highly flexible WOLFIN WATERPROOFING THAT WORKS.
INOFIN: Maximum safety and application advantages INOFIN is the FPO membrane of WOLFIN Bautechnik. The membrane does not only meet the highest quality demands for a plasticizer free waterproofing of roofs but also offers various application advantages. INOFIN FR is suitable for mechanical fastening and can be loose laid under ballast. INOFIN FR-V is a fleece-backed membrane for a bonded layer structure. Highest fire protection FR = Fire resistant. INOFIN roofing membrane fulfills the highest fire protection requirements. The membrane meets the DIN 4102-7 requirements (External fire) on EPS- insulation without an additional fire protection layer and receives the classification B ROOF (t1) according to EN 13501-5. Basis for quality INOFIN roofing membranes consist of flexible Polyolefin (FPO) on the basis of a special Ethylene- Butyl-Acrylate composition. This synthetic com - position developed by WOLFIN Bautechnik does not contain rubber. Therefore it offers a conside - rably lower fire load compared to other Polypro - pylene based FPO membranes. Fire protection is ensured permanently through the addition of highquality flame retardants. Overview of product advantages of INOFIN: Extremely user-friendly: No special cleaning of the seam before welding necessary. Thereby one step can be saved Ease of welding at a wide range of temperatures for a secure and professional seam sealing Can be installed without an additional fire protection layer on EPS-insulation Contains high-quality, ecologically harmless flame retardants Flexible at low temperatures Bitumen resistant Free of halogen and plasticizers 2
Free of plasticizers and for highest fire protection INOFIN FR INOFIN FR is characterized by a high form stability and tear resistance due to the integrated combination of glass fabric and glass fleece. Due to the special composition based on Polyethylene, INOFIN FR can be easily applied even at low temperatures. Because of this high-quality composition no special cleaning of the seam is necessary before welding and therefore saves time. Details like skylights or parapet connections can be carried out quickly with the Teroson Spray Adhesive. Highest security due to a combination of glass fabric and glass fleece INOFIN FR is suitable for loose laid under ballast or mechanical fastening. INOFIN FR-V INOFIN FR-V is equipped with a high-quality polyester fleece on the underside. In combination with the adhesive for roofing membranes Teroson TK 400 it offers an excellent adhesion to the substrate and therefore more security of the complete system structure. It has a fabric-free edge for accurate and homogenous welding of one strip to the next. Sealing without penetration due to a bonded layer structure INOFIN FR-V is approved for adhesive bonding (bonding with strips of adhesive for roofing membranes Teroson TK 400, fully bonded with Teroson 3958) and can be loose laid under ballast. INOFIN SYSTEM ACCESSORIES Sealing with FPO membranes often poses a challenge for roofers in case of details. With the accessories especially developed for the INOFIN roofing membranes the work on site is much easier and safer. INOFIN Pipe insert, flexible: the pre-stretched INOFIN F stripe provides a fast and simple edging of round passages. INOFIN Pipe Insert, 50 mm: Included in the scope of delivery is a suitable shrink hose for a secure connection to the passages. Details can be carried out quickly and easily with INOFIN accessories WITEC Rail KF: The rail offers a simple and fast valley fixation with INOFIN roofing membranes. 3
Methods of application INOFIN FR PRODUCT RANGE INOFIN INOFIN Thickness Width Length Area Product name mm mm m m 2 /Roll INOFIN FR 1,5 1.100 15 16,50 INOFIN FR 1,5 1.620 15 24,30 INOFIN FR 1,8 1.100 15 16,50 INOFIN FR 1,8 1.620 15 24,30 INOFIN FR 2,0 1.100 15 16,50 INOFIN FR 2,0 1.620 15 24,30 INOFIN FR-V 2,5 1.620 15 24,30 INOFIN FR-V 2,8 1.620 15 24,30 Mechanically fixed structure INOFIN F 1,5 1.060 15 15,90 (Homogeneous membrane for forming structural details and collars) INOFIN Composite Metal Sheets Width Length Area mm m m 2 /Roll INOFIN Composite Metal Sheet Plate 1.000 2 2,00 INOFIN Composite Metal Sheet Plate 1.000 3 3,00 50 Plates/Pallet INOFIN Composite Metal Sheet Coils 1.000 30 30,00 Loose laid under ballast INOFIN FR-V Bonding with strips INOFIN System products INOFIN Internal Corner INOFIN External Corner INOFIN Lightning Rod Protection Tube INOFIN Pipe Insert 50 mm INOFIN Pipe Insert flexible WITEC Rail KF INOFIN drainage, ventilation, gravel and leaf trap elements WOLFIN Basic Element material thickness 1,0 mm, thermally insulated, suitable for a pipe with a connecting sleeve INOFIN Extension Element DN 100 with gravel basket and INOFIN membrane flange, can be combined with WOLFIN Basic Element DN 100 INOFIN Ventilation Element DN 100 with INOFIN membrane flange, can be combined with WOLFIN Basic Element DN 100 Packaging unit 25 pcs./carton 25 pcs./carton 5 pcs./carton Piece Maintenance path for the Width Length Area INOFIN membrane system mm m m 2 /Roll WITEC Walkway FPO-membrane for non-slip maintenance paths. Colour: red 740 15 11,10 Adhesives for application Content/ Packaging within the INOFIN system package unit Terotech Spray Adhesive Joint adhesive and assembly support 750 ml 6 cans Loose laid under ballast INOFIN Contact Adhesive For the connection bonding of INOFIN FR membranes 9 kg Piece 4
TECHNICAL INFORMATION INOFIN Product data according to EN 13956 Results INOFIN FR Results INOFIN FR-V Characteristics Test standard Unity Details 1,5 mm 1,8 mm 2,0 mm 1,5 mm 1,8 mm Visible defects EN 1850-2 passed passed Length EN 1848-2 m MDV 15 Width m MDV 1,10 / 1,62 1,10 / 1,62 1,10 / 1,62 1,62 Straightness mm MLV 30 Flatness mm MLV 10 Mass per unit area EN 1849-2 kg/m 2 MDV 1,61 1,90 2,15 1,8 2,1 Effective thickness mm MDV 1,5 1,8 2,0 1,5 1,8 Water tightness EN 1928 B kpa MLV passed External fire performance ENV 1187 Annex E B ROOF (t1)* Reaction to fire EN 13501-1 s. 5.2.5.2 Class E Joint peel resistance EN 12316-2 N/50 mm MLV 300 Joint shear resistance EN 12317-2 N/50 mm MLV 800 ** 600 Tensile strength EN 12311-2 N/50 mm MLV 800 1.000 Elongation % MLV 2 Resistance to impact Method A EN 12691 mm MLV 600 650 750 800 1.000 Method B mm MLV 600 650 750 1.200 1.500 Resistance to static load EN 12730 Method B kg MLV 20 Durability of watertightness EN 1296 passed passed against aging EN 1928 Durability of watertightness EN 1847 passed passed against chemicals EN 1928 Nail tear resistance EN 12310-1 300 400 Tear resistance EN 12310-2 N MLV 150 Resistance to root penetration EN 13948/FLL passed passed Dimensional stability EN 1107-2 % MLV 0,5 Foldability at low temperature EN 495-5 C MLV -40 UV exposure EN 1297 visual passed passed Hail resistance EN 13583 m/s MLV 25 Water vapour permeability EN 1931 µ = MDV 100.000 ± 30.000 Bitumen compatibility EN 1548 passed passed Information for product users: * Valid for the proofed roof structure ** or break above the joint shear Explanation: Status: October 2014 MDV = Manufacturer s declared value MLV = Manufacturer s limiting value Technical changes due to further developments are possible. Please consider the current installation guideline and -construction. You can find the declarations of performance on our website www.wolfin.com/downloads 5
A company of the ICOPAL-Group WOLFIN Bautechnik GmbH Am Rosengarten 5 D-63607 Wächtersbach-Neudorf Phone: +49 6053 708-0 Fax: +49 6053 708-130 E-Mail: export@wolfin.com B A U T E C H NIK WBT0084_1014_VU www.wolfin.com WOLFIN WATERPROOFING THAT WORKS.