Planning book System M Shelf System M Sideboard Table M 04 Side table M 05 Lotus table Side table Kaiser Side table Kanji Sales price list excl. VAT Valid from January 2018
What do we expect from our furniture? There are many different answers to this question. But even many opinions which are the same. Addition is a good keyword. Furnishings increase over time. Things will be added permanently and this is of course not only furniture. These are objects for everyday commodities, objects we don t need but which we like to have. Important things and unimportant ones. Pretty things and trivial ones. The human being is in the centre of all these things and stories because everything has to do with him. Wouldn t it be nice if some subjects would take back themselves so that others will attract more attention? Is there a kind of basic principle on which we can build up? We like to produce this kind of furniture: the base. Furniture which appearance leaves space for other things. Because our furniture always gets there where something exists and they should not eliminate but integrate themselves. To exist as a basis there should be many possibilities. But even then it must not always suit. Because we know that, we can adapt our furniture: to dimensions, to colours, to wishes. Following the fashion is foreign to us. We talk about validity. For more information please visit www.systemmoebel-plus.com. 02 03
Overview System M Introduction, Planning, Care Shelves Planning examples Planning overview Vertical wall profile Groundbased wall mounting Panel Panel perforated Hook, console, etc. Shelf Shelf 0.5 file level Ending and writing shelf Sloping shelf 0.5 file level Shelf for coat-hangers Drawer shelf Drawer shelf 0.5 file level Corpus 1 file level Insert Table Accessories P. 06 P. 08 P. 10 P. 12 P. 14 P. 16 P. 18 P. 19 P. 20 P. 22 P. 24 P. 26 P. 28 P. 30 P. 32 P. 34 P. 36 P. 40 P. 48 P. 50 Sideboards Planning examples Wall board Horizontal wall profile Drawer corpus 0.5 file level Corpus open 1 file level Corpus open 1.5 file levels Corpus open 2 file levels Corpus open 2.5 file levels Corpus open 3 file levels Fronts Accessories Table P. 52 P. 54 P. 56 P. 58 P. 60 P. 62 P. 64 P. 66 P. 68 P. 70 P. 72 P. 74 P. 86 Table M 04 Tables Stand-alone table square Stand-alone table retangular Stand-alone table round Bar table Accessories Side table M 05 Side tables Table Table set Frame Tray P. 88 P. 90 P. 90 P. 92 P. 93 P. 94 P. 96 P. 98 P. 99 P. 100 P. 101 Lotus table Lotus tables Table Side table Kaiser Side table Large Kaiser Small Kaiser P. 102 P. 104 P. 106 P. 108 P. 108 Side table Kanji Side table Kanji H, A, F P. 110 P. 112 04 05
System M Planning Mounting Care System M is the basis for the things in life, for books and documents, for dishes and vases, for CDs and paper, for office and home, for the meeting room and for the living room. It can hold everything we like to store, to present or to hide. The basis will mostly be loaded much. Because of this it should be solid and long-lasting. This is not only valid for the structure but also for the appearance. The elements of the basic configuration consist of steel and have an epoxy powder coated surface. All parts of the System M are separately removable. Everything can be arranged in new ways and many things can be changed: A fold down door can be replaced by drawers, initially mounted on the wall and then placed on the floor. Many options are possible because we know that everything can change. System M will change like our furniture, too. It will grow and will adapt. We like to create a qualified basis for a furniture-system which meets the requirements. Your requirements. This document shows all the possibilities offered by System M. It begins with the mounting options, shows how to use the system and gives planning examples. It lists the individual elements, gives their dimensions (W D H) and designs and gives examples of how the elements can be combined. The drawings are on a scale of 1:25. The colours correspond to the RAL colour system. For the colour selection, the article number must be supplemented with the appropriate letter for the colour: W, A, B or S. RAL 9016 RAL 7042 RAL 7043 RAL 9017 Special colours are possible. Prerequisite for the installation are solid and resilient walls. Weaker walls can only carry smaller loads. The walls should be carefully considered before any planning. Included with the wall profiles are screws in size 5 x 60 mm, but no anchor bolts, because we do not know which walls are present. Only use anchor bolts that are suitable for the existing wall and observe the resulting possible loads that can accommodate the system. The longer the wall profiles, the more screw holes and the higher the load bearing capacity. For mounting on walls, you need a pencil, a ruler, an air level, a drill, a screwdriver and anchor bolts suitable for the existing wall. The vertical wall profiles serve as a mounting template. The elements of System M are equipped with a robust powder-coating. To remove light dirt, use best a soft, damp cotton cloth. Stronger impurities should be treated with water diluted household cleaner. To remove felt pen, pen and other stubborn stains the use of dilute alcohol or mineral spirits is recommended. Vinegar cleaner removes limescale. After cleaning, the surface is to be treated with a mild household detergent or water and wiped dry with a soft cloth or chamois leather. Please do not use any abrasive cleaners or nitro thinners or acid or alkaline cleaning agents. It is also advisable to remove stains immediately. Use our configurator to plan your own System M on our website. For more information please visit www.systemmoebel-plus.com. www.systemmoebel-plus.com/en/configurator 06 07
System M Shelf System M Shelf Everything is possible. Vertical wall profiles allow the hanging of shelves and corpora in any ranking with different configurations. The hanging happens by bottom supports which can be frontal set in the profiles and which can be placed in the grid of 4 cm. 08 09
Article Number Dimensions Article no. Price piece/total excl. VAT Article Number Dimensions Article no. Price piece/total excl. VAT Vertical wall profile Shelf 4 pieces 14 pieces 7 pieces 224 cm 80 x 32 cm 120 x 32 cm M 110 000 224... M 310 080 032... M 310 120 032... Total sales price 74.00 / 296.00 80.00 / 1,120.00 113.00 / 791.00 2,207.00 Vertical wall profile Ending and writing shelf Shelf Corpus with hinged door Drawer shelf 0.5 file level 1 piece 3 pieces 2 pieces 1 piece 4 pieces 2 pieces 2 pieces 2 pieces 1 piece 164 cm 184 cm 80 x 24 cm 120 x 24 cm 80 x 24 cm 80 x 32 cm 120 x 24 cm 80 x 40 x 40 cm 120 x 40 x 20 cm M 110 000 164... M 110 000 184... M 330 080 024... M 330 120 024... M 310 080 024... M 310 080 032... M 310 120 024... M 511 080 040... M 350 120 040... Total sales price 60.00 / 60.00 64.00 / 192.00 75.00 / 150.00 101.00 / 101.00 75.00 / 300.00 80.00 / 160.00 101.00 / 202.00 951.00 / 1,902.00 695.00 / 695.00 3,762.00 Planning examples Listed are all items that are required for the configuration shown. The drawings are on a scale of 1:25. The Configurator for System M is a planning program which can be accessed on our website. It is suitable for desktop computers and tablets. From a functional point of view operation with a smartphone is not possible. The Configurator allows the planning of standard configurations for System M. This is done in different representations of views, dimensioned views and rendered perspectives. It is possible to display a list of items of the created configuration and to create a price calculation. In addition, the 3D data can be exported. www.systemmoebel-plus.com/en/configurator 10 11
Overview for shelves with uniform shelf spaces Grid space Shelf clearance Shelf space Shelf depth DVDs and pocketbooks: Shelf depth 16 cm Grid space 24 cm Shelf clearance 22 cm Shelf space 16 cm 16 cm 20 cm 24 cm 28 cm 32 cm 36 cm 40 cm 14 cm (CDs) 18 cm 22 cm (DVDs and pocketbooks) 26 cm (Books) 30 cm 34 cm (Folders) 38 cm 8 cm 12 cm 16 cm 20 cm 24 cm 28 cm 32 cm 16 cm 16 cm 16 cm 24 cm 24 cm 32 cm 32 cm Shelf height: 8 cm Shelf height 0.5 file level: 20 cm Corpus height 1 file level: 40 cm Books: Shelf depth 24 cm Grid space 28 cm Shelf clearance 26 cm Shelf space 20 cm shelf height 8 cm shelf space 28 cm Folders: Shelf depth 32 cm Grid space 36 cm Shelf clearance 34 cm Shelf space 28 cm shelf clearance 34 cm shelf space 16 cm shelf clearance 22 cm grid space 36 cm grid space 24 cm Profile lengths 84 cm 104 cm 124 cm 144 cm 164 cm 184 cm 204 cm 224 cm So the needed profile length is determined: (Number of shelves - 1) x grid space + shelf height = required profile length example: A shelf with 7 shelves for folders is to be planned. (7-1) x 36 + 8 = 224 cm If you want to work with different distances, the addition of the shelf heights + the various shelf spaces is recommended to get the required profile length. 12 13
Vertical wall profile powder-coated with screws 5 x 60 mm for wall mounting 2.1 cm 2.6 cm 44 cm 64 cm 84 cm 104 cm 124 cm 144 cm 164 cm 184 cm 204 cm 224 cm 3 screw holes 4 screw holes 5 screw holes 6 screw holes 7 screw holes 8 screw holes 9 screw holes 10 screw holes 11 screw holes 12 screw holes 11 grid holes 16 grid holes 21 grid holes 26 grid holes 31 grid holes 36 grid holes 41 grid holes 46 grid holes 51 grid holes 56 grid holes M 110 000 044... M 110 000 064... M 110 000 084... M 110 000 104... M 110 000 124... M 110 000 144... M 110 000 164... M 110 000 184... M 110 000 204... M 110 000 224... 33.00 38.00 42.00 47.00 51.00 56.00 60.00 64.00 69.00 74.00 The longer the profiles, the more attachment holes and the higher the load bearing capacity. Only use anchor bolts that are suitable for the wall. 20 cm 4 cm grid bottom support 80 cm 120 cm tool Vertical wall profiles will be screwed to the wall at intervalls of 80 or 120 cm. They allow the hanging of different elements. A bottom support will be inserted vertically from the front in the profile, rotated by 90 degrees and is therefore safe in the hidden gridding of the profile. The grid for the bottom supports is 4 cm for optimal height classifications. If profiles will be added on each other the grid will be continued equally. All elements can be clipped in this way that the sides end above and below with the profile. The distance of the screw holes is 20 cm. So the profiles can serve as a mounting template for the grid dimensions of 80 and 120 cm. Because of the fact that the upper and lower screw holes each have a distance from 2 cm to the end of the profile, that means that they are the same at the top and the bottom, it is not necessary to consider the direction of the profile while mounting it. For the total mass outside the grid dimensions (80 or 120 cm) have to be summed up and 2.1 cm have to be added. The total depth of the shelving system (without grips) is the depth of the shelf or of the corpus 40 cm + 3.3 cm. For mounting proof and resilient walls are required. Weaker walls can only carry lower loads. For an easy mounting there should be a distance of 3-4 cm right and left next to the profiles. At the beginning of the mounting at a height of 32 cm (bore 34 cm) a corpus is placed at the table height of 72 cm. 14 15
Article Dimensions Article no. Sales price excl. VAT C-profile for ground-based wall mounting steel sheet 1.5 mm powder-coated with foot and adjustable foot Set of 3 wall holders for c-profile with covers steel powder-coated with screws 5 x 80 mm 204 cm 224 cm 244 cm 8 x 2 x 2 cm for verticale wall profile 184 cm for verticale wall profile 204 cm for verticale wall profile 224 cm each with 2 screw holes M 120 000 204... M 120 000 224... M 120 000 244... M 123 008 002... 140.00 148.00 155.00 117.00 Vertical wall profile powder-coated 184 cm 204 cm 224 cm 46 grid holes 51 grid holes 56 grid holes M 110 000 184... M 110 000 204... M 110 000 224... 64.00 69.00 74.00 Spacer 1 cm for wall holders for c-profile steel powder-coated 8 x 1 x 2 cm 3.1 cm 5.1 cm M 121 008 001... 12.00 2.6 cm 8 cm C-profile 22 cm Vertical wall profile (order separately) 80 cm 80 cm 120 cm 80 cm Wall holders (3 pieces for each profile) 20 cm (-1.5/+4 cm) Vertical wall profiles are inserted in the C-profiles and screwed to the wall in a distance of 80 or 120 cm by using three wall mounts per profile. All elements can be clipped in this way that the sides end above with the profile. The distance to the bottom is 20 cm for an element which is clipped below. The vertical wall profiles serve as a mounting template for the grid dimensions 80 and 120 cm. For the complete external dimension the grid dimensions (80 and accordingly 120 cm) have to be summed up and 8 cm have to be added. The complete depth of the shelf (without grips) is the depth of one shelf or of a corpus 40 + 5.5 to 6.5 cm. The loads will be removed on the ground. Prerequisite for the installation are solid and resilient walls. Weaker walls can only carry lower loads. For an easy mounting there should be right and left 6-8 cm distance next to the profiles. 16 17
Article Dimensions Article no. Sales price excl. VAT Panel with bottom supports Panel 0.5 file level with bottom supports Panel 1 file level with bottom supports 80 x 8 cm 120 x 8 cm 80 x 20 cm 120 x 20 cm 80 x 40 cm 120 x 40 cm M 210 080 008... M 210 120 008... M 210 080 020... M 210 120 020... M 210 080 040... M 210 120 040... 62.00 82.00 74.00 100.00 93.00 128.00 Panel perforated with punched holes Ø 6.5 mm with bottom supports Panel perforated 0.5 file level with punched holes Ø 6.5 mm with bottom supports Panel perforated 1 file level with punched holes Ø 6.5 mm with bottom supports 80 x 8 cm 120 x 8 cm 80 x 20 cm 120 x 20 cm 80 x 40 cm 120 x 40 cm M 211 080 008... M 211 120 008... M 211 080 020... M 211 120 020... M 211 080 040... M 211 120 040... 70.00 94.00 93.00 129.00 125.00 176.00 Panels can be fixed in the vertical wall profiles like shelves. Perforated panels can also be equipped with hooks and consoles. 18 19
Article Dimensions Article no. Sales price excl. VAT Hook small with 2 threaded bolts steel sheet 1.5 mm Hook large with 2 threaded bolts steel sheet 1.5 mm 12 x 10 x 2 cm 12 x 14 x 4 cm M 212 002 010... M 212 004 014... 32.00 36.00 Brochure box DIN A4 steel sheet 1.5 mm 22 x 30 cm M 230 022 030... 35.00 Console for depth 16 cm with 2 threaded bolts and 2 holes for fixing a board in the depth of 16 cm steel sheet 1.5 mm 20 x 14 x 6 cm M 220 006 014... 40.00 Console for depth 24 cm with 2 threaded bolts and 2 holes for fixing a board in the depth of 24 cm steel sheet 1.5 mm 20 x 22 x 6 cm M 220 006 022... 45.00 Console for depth 32 cm with 2 threaded bolts and 2 holes for fixing a board in the depth of 32 cm steel sheet 1.5 mm 20 x 30 x 6 cm M 220 006 030... 51.00 Text Console Hooks, consoles and brochure boxes are equipped with M6 threaded bolts and can be attached to perforated panels. Consoles are provided individually for boards with a maximum width of 40 cm and a couple for boards in the width of 80 and 120 cm. Boards on site: W x D 396 x 160, 240 and 320 mm 796 x 160, 240 and 320 mm 1196 x 160, 240 and 320 mm 20 21
Shelf with bottom supports 80 x 16 cm 80 x 24 cm 80 x 32 cm 80 x 40 cm M 310 080 016... M 310 080 024... M 310 080 032... M 310 080 040... 63.00 75.00 80.00 120.00 8 cm 120 x 16 cm 120 x 24 cm 120 x 32 cm 120 x 40 cm M 310 120 016... M 310 120 024... M 310 120 032... M 310 120 040... 89.00 101.00 113.00 148.00 The shelf depth of 24 cm is ideal for many books. At high loads, the shelf width 80 cm should be used. Examples of shelf spaces can be found on page 12. Shelves are inserted in the vertical wall profiles with bottom supports and can be placed in a grid of 4 cm. Therefore clearances of 10, 14 (for CD), 18, 22 (for DVD and pocketbooks), 26, 30, 34 (for files), 38 cm etc. arise between the shelves. They are available in the width of 80 and 120 cm and in the depth of 16, 24, 32 and 40 cm. The height of the side is 8 cm (10 cm including the lower edging). The shelves end above and below with the vertical wall profiles. The total depth of the shelf is the depth of the shelf + 3.3 cm. 22 23
Shelf 0.5 file level with bottom supports 20 cm 80 x 24 cm 80 x 32 cm 80 x 40 cm 120 x 24 cm 120 x 32 cm 120 x 40 cm M 320 080 024... M 320 080 032... M 320 080 040... M 320 120 024... M 320 120 032... M 320 120 040... 112.00 124.00 152.00 154.00 166.00 194.00 Shelves 0.5 file level are inserted with bottom supports in the vertical wall profile and can be placed in a grid of 4 cm. Therefore clearances of 22, 26, 30, 34, 38 cm etc. arise between the shelves. They are available in the width of 80 and 120 cm and in the depth of 24, 32 and 40 cm. The height of the side is 20 cm (22 cm including the lower edging). The total depth of the shelf is the depth of the shelf + 3.3 cm. They are particularly suitable for files and image associations since their high sides are good bookends. They can be combined with shelves and can be suitable inserted at the same height above or below. 24 25
Ending and writing shelf with bottom supports 8 cm 80 x 24 cm 80 x 32 cm 80 x 40 cm 120 x 24 cm 120 x 32 cm 120 x 40 cm M 330 080 024... M 330 080 032... M 330 080 040... M 330 120 024... M 330 120 032... M 330 120 040... 75.00 80.00 120.00 101.00 113.00 148.00 In contrast to the shelves (page 22) the sides of the ending and writing shelves are bent downwards. ending shelf writing shelf Ending and writing shelves are inserted with bottom supports in the vertical wall profile and can be placed in a grid of 4 cm. Therefore clearances of 10, 14, 18, 22, 26, 30, 34, 38 cm etc. arise between the shelves. They are available in the width of 80 and 120 cm and in the depth of 24, 32 and 40 cm. The height of the side is 8 cm. The total depth of the shelf is the depth of the shelf + 3.3 cm. They can be placed next to corpora at the same height as a writing shelf or as an ending shelf at the top of the profile. 26 27
Sloping shelf 0.5 file level angle 21 with bottom supports 20 cm 80 x 32 cm Inside 79 x 31 x 3 cm 120 x 32 cm Inside 119 x 31 x 3 cm M 340 080 032... M 340 120 032... 107.00 137.00 angle 21 Sloping shelves 0.5 file level are inserted with bottom supports in the vertical wall profile and can be placed in a grid of 4 cm. They are available in the width of 80 and 120 cm and in the depth of 32 cm. The height of the side is 8 cm and 20 cm at the front. The total depth of the shelf is the depth of the shelf 32 + 3.3 cm. They are especially suitable for the presentation of magazines or books in DIN A4 (upright) and DIN A3 (landscape). They can be combined with shelves and shelves 0.5 file level and appropriately placed at the same height. 28 29
Shelf for coat-hangers with bottom supports 80 x 32 cm 80 x 40 cm 120 x 32 cm 120 x 40 cm M 360 080 032... M 360 080 040... M 360 120 032... M 360 120 040... 163.00 189.00 214.00 241.00 8 cm The distance from the center of the clothes rail to the wall is about 29 cm in depth 32 cm and about 37 cm in depth 40 cm. Shelves for coat-hangers are inserted in the vertical wall profiles with bottom supports and can be placed in a grid of 4 cm. They are available in the width of 80 and 120 cm and in the depth of 32 and 40 cm. The height of the side is 8 cm. The center of the clothes rail is about 6 cm from the front edge. The total depth of the shelf is the depth of the shelf + 3.3 cm. They can be combined with shelves, ending and writing shelves and drawer shelves and placed at the same height. 30 31
Drawer shelf with bottom supports drawer directed on felt stripes 8 cm 80 x 32 cm Inside 78.5 x 31 x 5 cm 80 x 40 cm Inside 78.5 x 39 x 5 cm 120 x 32 cm Inside 118.5 x 31 x 5 cm 120 x 40 cm Inside 118.5 x 39 x 5 cm M 335 080 032... M 335 080 040... M 335 120 032... M 335 120 040... 214.00 250.00 257.00 293.00 Drawer shelf Drawer shelves are inserted in the vertical profiles with bottom supports and can be placed in a grid of 4 cm. They are available in the width of 80 and 120 cm and in the depth of 32 and 40 cm. The height of the side is 8 cm. The total depth of the shelf is the depth of the shelf + 3,3 cm. The drawer shelf is directed on felt stripes and removable. It can be placed at the same height next to the corpora. 32 33
Article Dimensions Article no. Sales price excl. VAT Drawer shelf 0.5 file level with bottom supports drawer with self closing and cushioning 20 cm 80 x 40 cm Inside 65 x 32.5 x 14 cm 120 x 40 cm Inside 105 x 32.5 x 14 cm M 350 080 040... M 350 120 040... 584.00 695.00 Lock right for drawer shelf 0.5 file level keyed alike suitable for locking systems Ø 19 mm M 610 000 001 62.00 Drawer shelves 0.5 file level are inserted with bottom supports in the vertical wall profile and can be placed in a grid of 4 cm. They are available in the width of 80 and 120 cm and in the depth of 40 cm. The height of the side is 20 cm. The total depth of the shelf is the depth of the shelf + 3.3 cm. They can be placed at the same height next to other corpora. The inside of the shelf is Traffic black. 34 35
Article Dimensions Article no. Sales price excl. VAT Corpus open 1 file level with bottom supports 80 x 40 x 40 cm Inside 73 x 35 x 35 cm 120 x 40 x 40 cm Inside 113 x 35 x 35 cm M 510 080 040... M 510 120 040... 617.00 720.00 Lock right for hinged door 1 file level keyed alike suitable for locking systems Ø 19 mm M 610 000 001 62.00 Corpus with hinged door 1 file level with bottom supports cable winch with cushioning 40 cm 80 x 40 x 40 cm Inside 73 x 35 x 35 cm 120 x 40 x 40 cm Inside 113 x 35 x 35 cm M 511 080 040... M 511 120 040... 951.00 1,081.00 Every corpus open can be supplemented with hinged doors or drawers as needed. Hinged doors and drawers are listed on page 70. corpus open 1 file level Corpora are inserted with bottom supports in the vertical wall profile and can be placed in a grid of 4 cm. They are available in the width of 80 and 120 cm and in the depth of 40 cm. The height of the side is 40 cm. The total depth of the shelf is the depth of the corpus 40 + 3.3 cm. They can be used open, equipped with hinged doors or drawers. The inside of the corpora is Traffic black. 36 37
Article Dimensions Article no. Sales price excl. VAT Corpus with drawer 1 file level with bottom supports drawer with self closing and cushioning 80 x 40 x 40 cm Inside 65 x 32.5 x 32 cm 120 x 40 x 40 cm Inside 105 x 32.5 x 32 cm M 512 080 040... M 512 120 040... 940.00 1,110.00 Lock right for drawers 0.5 and 1 file level keyed alike suitable for locking systems Ø 19 mm M 610 000 001 62.00 Corpus with 2 drawers 0.5 file level with bottom supports drawer with self closing and cushioning 40 cm 80 x 40 x 40 cm Inside 65 x 32.5 x 14 cm 120 x 40 x 40 cm Inside 105 x 32.5 x 14 cm M 514 080 040... M 514 120 040... 1,216.00 1,500.00 For the corpus with 2 drawers 0.5 file level two locks are required. Corpora are inserted with bottom supports in the vertical wall profile and can be placed in a grid of 4 cm. They are available in the width of 80 and 120 cm and in the depth of 40 cm. The height of the side is 40 cm. The total depth of the shelf is the depth of the corpus 40 + 3.3 cm. They can be used open, equipped with hinged doors or drawers. The inside of the corpora is Traffic black. 38 39
Rear wall cut out 65 x 25 cm (for corpus width 80 cm) 105 x 25 cm (for corpus width 120 cm) M 615 065 025 M 615 105 025 36.00 36.00 Rear wall cut out individual according to your specifications (max. size see above) M 615 000 XXX 75.00 Rear wall 1 file level with cut out steel sheet 80 x 40 cm 120 x 40 cm M 615 080 040 S M 615 120 040 S 69.00 100.00 rear wall cut out Rear walls of corpora can be equipped with a rear wall cut out. 40 41
Inner drawer steel sheet drawer with self closing and cushioning 80 x 40 x 20 cm Inside 65 x 32.5 x 10 cm 120 x 40 x 20 cm Inside 105 x 32.5 x 10 cm M 415 080 020 S M 415 120 020 S 270.00 305.00 The inner drawer can be mounted any time in existing corpora. Inner drawer Corpora can be arranged with inner drawers behind drawers 1 file level and behind hinged doors 1 file level. The colour of the inner drawer is traffic black like the inner life of the corpora. 42 43
Adjustable intermediate floor steel sheet with floor bearer 73 x 35 x 2 cm 113 x 35 x 2 cm M 611 080 035 S M 611 120 035 S 57.00 69.00 Attachment for drawers 1 file level steel sheet 69 x 32.5 x 21 cm 109 x 32.5 x 21 cm M 612 080 032 S M 612 120 032 S 57.00 68.00 Insert for drawers for hanging files steel sheet maximum 2 for drawers width 80 cm maximum 3 for drawers width 120 cm 35 x 32.5 x 28 cm M 622 035 032 S 53.00 The accessories can always be used in existing corpora. adjustable intermediate floor Corpora can be equipped with different inserts. The inside of the corpora is Traffic black. 44 45
Insert for drawer for 25 CDs with stilt, magnetic steel sheet maximum 4 for drawers width 80 cm maximum 6 for drawers width 120 cm 16 x 32.5 x 7 cm M 614 016 032 S 36.00 Insert for drawer for 17 DVDs with stilt, magnetic steel sheet maximum 3 for drawers width 80 cm maximum 5 for drawers width 120 cm 21 x 32.5 x 7 cm M 624 021 032 S 38.00 The different inserts can be combined. The clear internal dimensions of the drawers are 65 and 105 cm. Insert for drawer for DIN A4 steel sheet maximum 2 for drawers width 80 cm maximum 4 for drawers width 120 cm 23 x 32.5 x 7 cm M 634 023 032 S 30.00 Insert for drawer with angled paper trays for DIN A4 steel sheet maximum 1 for drawers width 80 cm maximum 3 for drawers width 120 cm 34 x 32.5 x 7 cm M 644 034 032 S 105.00 Drawers can be equipped with different inserts. These are magnetic and so they are fixed on the drawer bottom. CDs and DVDs can be adjusted transversely in the inserts and so they can be scrolled comfortably. The inside of the corpora is Traffic black. 46 47
Table with bottom supports Table legs screwed with adjustable feet 72 cm 80 x 80 x 72 cm 120 x 80 x 72 cm M 800 080 080... M 800 120 080... 361.00 465.00 Adjustable feet Tables are inserted in the vertical profiles with bottom supports. They are available in the width of 80 and 120 cm and in the depth of 80 cm. The height of the side is 8 cm and the height of the table is 72 cm. The total depth in the shelf is the depth of the table 80 + 3.3 cm. The table is particularly suitable as a small, stable workplace. He can be combined with ending and writing shelves and corpora and can be placed at the same height. 48 49
Bookend magnetic steel sheet 22 x 22 x 6 cm for shelf depth from 24 cm 30 x 30 x 6 cm for shelf depth from 32 cm M 640 020 006... M 640 030 006... 27.00 32.00 Inscription field magnetic steel sheet, plastic 10 x 2.8 x 1.4 cm paper 10 x 1 cm M 650 010 001... 10.00 Attachment for shelf for DIN A4 magnetic steel sheet 22.5 x 30 x 6 cm for shelf depth from 32 cm M 660 021 032... 25.00 Bookends are magnetic and can be placed on or under the shelves and at the rear wall. Bottom support steel (spare part) 1.6 x 0.5 cm M 120 000 000 0.10 Tool for bottom supports to facilitate insertion of the bottom supports in the vertical wall profile magnetic (spare part) 10 x 0.6 cm M 700 120 100 6.00 bookend attachment for shelf inscription field Magnetic bookends can be positioned as desired. Inscription fields are also magnetically and placed under the front edge of shelves, shelves 0.5 OH and ending and writing shelves. Attachments for shelf for A4 can be used for shelves from a depth of 32 cm. Each shelf and corpus is delivered with bottom supports and each order of vertical wall profiles is delivered with the tool for bottom supports. However, they are also offered as a spare part. Technical modifications reserved. All prices are non-binding price recommendations. Deliveries are exclusively effected pursuant our terms and conditions of business. From a selling price of 1,200.- excl. VAT the delivery is carriage paid. 50 51
System M Sideboard System M Sideboard Everything is possible. Horizontal wall profiles allow the invisible hanging of corpora in any width with different configurations. The same corpus can also be arranged free on feet or mobile on castors. 52 53
Article Number Dimensions Article no. Price piece/total excl. VAT Article Number Dimensions Article no. Price piece/total excl. VAT Corpus open 1 file level Hinged door 1 file level Foot 2 pieces 2 pieces 8 pieces 120 x 40 x 40 cm 120 x 40 cm 3 x 5 cm M 410 120 040... M 411 120 040... M 401 003 005... Total sales price 721.00 / 1,442.00 361.00 / 722.00 23.00 / 184.00 2,348.00 Horizontal wall profile Corpus open 1 file level corpus open 2 file levels Drawer 1 file level 2 drawers 0.5 file level 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece 200 cm 120 x 40 x 40 cm 80 x 40 x 79 cm 80 x 40 cm 120 x 40 cm 80 x 40 cm M 100 200 000 S M 410 120 040... M 420 080 040... M 412 080 040... M 412 120 040... M 414 080 040... Total sales price 53.00 / 53.00 721.00 / 721.00 961.00 / 961.00 323.00 / 323.00 389.00 / 389.00 600.00 / 600.00 3,047.00 Corpora 1 and 2 file levels can be combined on the horizontal wall profiles. Planning examples Listed are all items that are required for the configuration shown. The drawings are on a scale of 1:25. The Configurator for System M is a planning program which can be accessed on our website. It is suitable for desktop computers and tablets. From a functional point of view operation with a smartphone is not possible. The Configurator allows the planning of standard configurations for System M. This is done in different representations of views, dimensioned views and rendered perspectives. It is possible to display a list of items of the created configuration and to create a price calculation. In addition, the 3D data can be exported. www.systemmoebel-plus.com/en/configurator 54 55
Horizontal profile for wallboard steel sheet 3 mm, felt with screws 5 x 60 mm for wall mounting 80 cm 120 cm 3 screw holes 5 screw holes M 101 080 000 S M 101 120 000 S 24.00 34.00 Wallboard Pair of inner covers for wallboard steel sheet 5 cm 80 x 18 x 5 cm 80 x 24 x 5 cm 120 x 18 x 5 cm 120 x 24 x 5 cm 18 cm 24 cm M 400 080 018... M 400 080 024... M 400 120 018... M 400 120 024... M 401 000 018 S M 401 000 024 S 94.00 104.00 130.00 140.00 26.00 28.00 The profiles are always shorter than the specified plan measurement. So they are not visible when installed. Only use plugs that are suitable for the wall. 80 cm 120 cm 20 cm The wallboard is screwed on the wall by a horizontal profile. The profiles are not visible later. Each wallboard sticks to its own profile. For the complete external dimension the grid dimensions (80 and accordingly 120 cm) have to be summed up. The complete depth is the depth of the board + 1 cm. Prerequisite for the installation are solid and resilient walls. Weaker walls can only carry lower loads. The boards can be used individually, in rows or in combination with the corpora. The distance of the mounting holes allows the use of the profile as a wall-mounting template when several profiles are mounted in a horizontal line. The screw holes are about 3 cm below the upper edge of the individual boards. The inner covers for the wallboard can also be retrofitted. They are recessed on each side of the wallboard (6 cm). Technical modifications reserved. All prices are non-binding price recommendations. Deliveries are exclusively effected pursuant our terms and conditions of business. From a selling price of 800.- excl. VAT the delivery is carriage paid. 56 57
Horizontal wall profile steel sheet 4 mm with screws 5 x 60 mm for wall mounting 80 cm 120 cm 160 cm 200 cm 240 cm 7 screw holes 11 screw holes 15 screw holes 19 screw holes 23 screw holes M 100 080 000 S M 100 120 000 S M 100 160 000 S M 100 200 000 S M 100 240 000 S 20.00 31.00 42.00 53.00 64.00 7.5 cm Horizontal wall profiles are always shorter than the specified plan measurement. So they are not visible when installed. Only use anchor bolts that are suitable for the wall. Feet and castors as an alternative to horizontal wall profiles can be found on page 74. 80 cm 120 cm 10 cm Horizontal wall profiles are screwed to the wall and allow the hanging of corpora. Later the wall profiles are not visible. The length to be used depends on the corpora dimensions, so you need for example for 3 corpora in the width of 80 cm a wall profile in the length of 240 cm. If the sideboard is wider than 240 cm, more horizontal wall profiles are needed. For the overall outer dimensions the grids (80 or 120 cm) are added. The total depth (without handle) is the depth of the corpus 40 + 1 cm. Pre- requisite for the installation are solid and resilient walls. Weaker walls can only carry smaller loads. The spacing of the mounting holes permits the use of the wall profile as a mounting template if more than one profile is mounted in a horizontal line. The screw holes are about 6 cm below the top of the corpus. When mounting at a height of 66 cm (bore) a corpus depends on table height about 72 cm. Wall-mounted sideboards can later also be used freestanding on feet. Technical modifications reserved. All prices are non-binding price recommendations. Deliveries are exclusively effected pursuant our terms and conditions of business. From a selling price of 1,200.- excl. VAT the delivery is carriage paid. 58 59
Artikel Maße Artikel-Nr. Preis o. MwSt. Drawer corpus 0.5 file level drawer with self closing and cushioning 20 cm 80 x 40 cm Inside 65 x 32.5 x 14 cm 120 x 40 cm Inside 105 x 32.5 x 14 cm M 405 080 040... M 405 120 040... 584.00 695.00 Lock right for drawer corpus 0.5 file level keyed alike suitable for locking systems Ø 19 mm M 610 000 001 62.00 Feet and castors can be found on page 74. Horizontal wall profiles are listed on page 58. The drawer corpus 0.5 file level can be mounted on horizontal wall profiles or used free-standing on feet or castors. They are available in the width of 80 and 120 cm, in the height of 20 cm and in the depth of 40 cm. They can be placed at the same height next to other corpora. The inside of the corpora is Traffic black. Drawer corpora 0.5 file level on feet or castors have a total height of 25 cm. 60 61
Corpus open 1 file level 40 cm 80 x 40 x 40 cm Inside 73 x 35 x 35 cm 120 x 40 x 40 cm Inside 113 x 35 x 35 cm M 410 080 040... M 410 120 040... 617.00 721.00 Hinged doors and drawers are listed on page 72. Feet and castors can be found on page 74. Horizontal wall profiles are listed on page 58. Corpora 1 file level can be mounted on horizontal wall profiles or used free-standing on feet or castors. They are available in the width of 80 and 120 cm, in the height of 40 cm and in the depth of 40 cm. They can be used open, equipped with hinged doors or drawers and can be combined with other corpus heights. The inside of the corpora is Traffic black. Corpora 1 file level on feet or castors have a total height of 45 cm. 62 63
Corpus open 1.5 file levels 59.5 cm 80 x 40 x 59.5 cm Inside 73 x 35 x 55 cm 120 x 40 x 59.5 cm Inside 113 x 35 x 55 cm M 450 080 040... M 450 120 040... 880.00 945.00 For an open compartment in the upper area you need an adjustable intermediate floor. Adjustable intermediate floors are on page 82 in the planning book. Hinged doors and drawers are listed on page 72. Feet and castors can be found on page 74. Horizontal wall profiles are listed on page 58. Corpora 1.5 file levels can be mounted on horizontal wall profiles or used freestanding on feet or castors. They are available in the width of 80 and 120 cm, in the height of 59.5 cm and in the depth of 40 cm. They can be used open, equipped with hinged doors or drawers and can be combined with other corpus heights. The inside of the corpora is Traffic black. Corpora 1.5 file levels on feet or castors have a total height of 65 cm. 64 65
Corpus open 2 file levels with constructive floor 79 cm 80 x 40 x 79 cm Inside each 73 x 35 x 35 cm 120 x 40 x 79 cm Inside each 113 x 35 x 35 cm M 420 080 040... M 420 120 040... 961.00 1,059.00 Hinged doors and drawers are listed on page 72. Feet can be found on page 74. Horizontal wall profiles are listed on page 58. Corpora 2 file levels can be mounted on horizontal wall profiles or used freestanding on feet. They are available in the width of 80 and 120 cm, in the height of 79 cm and in the depth of 40 cm. They can be used open, equipped with hinged doors or drawers and can be combined with other corpus heights. The inside of the corpora is Traffic black. Corpora 2 file levels on feet have a total height of 84 cm. 66 67
Corpus open 2.5 file levels with constructive floor 80 x 40 x 98 cm Inside below 73 x 35 x 35 cm Inside above 73 x 35 x 55 cm M 425 080 040... 1.112,00 98 cm For an open compartment in the upper area you need an adjustable intermediate floor. Adjustable intermediate floors are on page 82 in the planning book. Hinged doors and drawers are listed on page 72. Feet can be found on page 74. Corpora 2.5 file levels can be used freestanding on feet. They are available in the width of 80 cm, in the height of 98 cm and in the depth of 40 cm. They can be open, equipped with hinged doors or drawers and can be combined with other corpus heights. The inside of the corpora is Traffic black. Corpora 2.5 file levels on feet have a total height of 103 cm. 68 69
Corpus open 3 file levels with two constructive floors 80 x 40 x 118 cm Inside each 73 x 35 x 35 cm M 430 080 040... 1,194.00 118 cm Hinged doors and drawers are listed on page 72. Feet can be found on page 74. Corpora 3 file levels can be used freestanding on feet. They are available in the width of 80 cm, in the height of 118 cm and in the depth of 40 cm. They can be open, equipped with hinged doors or drawers and can be combined with other corpus heights. The inside of the corpora is Traffic black. Corpora 3 file levels on feet have a total height of 123 cm. 70 71
Article Dimensions Article no. Sales price excl. VAT Hinged door 1 file level steel sheet cable winch with cushioning Drawer 1 file level steel sheet drawer with self closing and cushioning 80 x 40 cm Inside 73 x 35 x 35 cm 120 x 40 cm Inside 113 x 35 x 35 cm 80 x 40 cm Inside 65 x 32.5 x 32 cm 120 x 40 cm Inside 105 x 32.5 x 32 cm M 411 080 040... M 411 120 040... M 412 080 040... M 412 120 040... 334.00 361.00 323.00 389.00 Lock right for hinged doors and drawers keyed alike suitable for locking systems Ø 19 mm M 610 000 001 62.00 Drawers 0.5 file level steel sheet drawer with self closing and cushioning Pair of drawers 0.5 file level steel sheet drawer with self closing and cushioning 80 x 20 cm Inside 65 x 32.5 x 14 cm 120 x 20 cm Inside 105 x 32.5 x 14 cm 80 x 40 cm Inside 65 x 32.5 x 14 cm 120 x 40 cm Inside 105 x 32.5 x 14 cm M 413 080 040... M 413 120 040... M 414 080 040... M 414 120 040... 300.00 390.00 600.00 780.00 Every corpus open with 1, 1.5, 2, 2.5 or 3 file levels can be supplemented with hinged doors or drawers as needed. The positions of doors and drawers are optional and can be replaced in existing corpora. In free-standing corpora drawers should be mounted below. The corpus should be fixed additionally to the wall with the safety bracket. Corpora with drawers on castors should be balanced with counterweights. Safety brackets and counterweights can be found on page 76. lock hinged door Corpora can be equipped with hinged doors or drawers. The drawers are supplied without pull-out stop. The inside of the corpora is Traffic black. 72 73
Foot steel bottom side with felt with thread M10x20 Ø 3 x 5 cm M 401 003 005... 23.00 Hard Castor for soft floors plastic black with thread M10x20 Hard Castor with arrestor for soft floors plastic black with thread M10x20 5 cm 5 cm M 402 005 005 M 403 005 005 7.00 9.00 Horizontal wall profiles as an alternative to feet and castors are listed on page 58. Safety brackets and counterweights can be found on page 76. Soft Castor for hard floors plastic black/grey with thread M10x20 5 cm M 404 005 005 11.00 Soft Castor with arrestor for hard floors plastic black/grey with thread M10x20 5 cm M 405 005 005 13.00 castor Feet and castors (load capacity 50 kg / piece) are the alternative to hanging the corpora on horizontal wall profiles. The overall height is the same, so that they can be combined within a sideboard. Freestanding sideboards can later also be used wall-mounted. 74 75
Rear wall cut out 65 x 25 cm (for corpus width 80 cm) 105 x 25 cm (for corpus width 120 cm) M 615 065 025 M 615 105 025 36.00 36.00 Rear wall cut out individual according to your specifications (max. size see above) M 615 000 XXX 75.00 Rear wall 1 file level with cut out steel sheet Safety bracket for fixing freestanding corpora to the wall steel sheet 4 mm with screws 5 x 60 mm for wall mounting 80 x 40 cm 120 x 40 cm M 615 080 040 S M 615 120 040 S M 100 000 000 S 69.00 100.00 12.00 Freestanding corpora with drawers should be fixed to the wall with the safety bracket against overturning. Corpora with drawers on castors should be balanced with counterweights. Counterweight to balance in corpora with drawers steel 10 mm 80 x 32 x 1 cm (20 kg) 120 x 32 x 1 cm (30 kg) M 617 080 032 S M 617 120 032 S 153.00 208.00 rear wall cut out safety bracket Rear walls of corpora can be equipped with a rear wall cut out. The safety bracket fixes the free-standing corpus to the wall when drawers are used. The counterweight is used to balance the corpus with drawers on castors or if back panels are used or the safety bracket can not be mounted. They are mounted behind the rear wall. One weight can be used for each corpus starting from 1 file level. 76 77
Back panel 1 file level 80 x 40 cm 120 x 40 cm M 616 080 040... M 616 120 040... 82.00 117.00 Back panel 1.5 file levels 80 x 59 cm 120 x 59 cm M 616 080 059... M 616 120 059... 120.00 173.00 Back panel 2 file levels 80 x 79 cm 120 x 79 cm M 616 080 079... M 616 120 079... 153.00 225.00 Back panel 2.5 file levels 80 x 98 cm M 616 080 098... 188.00 Back panel 3 file levels 80 x 118 cm M 616 080 118... 204.00 Back panel Corpora 1, 1.5, 2, 2.5 or 3 file levels can be arranged with back panels. They are magnetic and can be mounted later without tools. 78 79
Inner drawer steel sheet drawer with self closing and cushioning 80 x 40 x 20 cm Inside 65 x 32.5 x 10 cm 120 x 40 x 20 cm Inside 105 x 32.5 x 10 cm M 415 080 020 S M 415 120 020 S 270.00 305.00 The inner drawer can be mounted any time in existing corpora. Inner drawer Corpora can be arranged with inner drawers behind drawers 1 file level and behind hinged doors 1 file level. The colour of the inner drawer is traffic black like the inner life of the corpora. 80 81
Adjustable intermediate floor steel sheet with floor bearer 73 x 35 x 2 cm 113 x 35 x 2 cm M 611 080 035 S M 611 120 035 S 57.00 69.00 Attachment for drawers 1 file level steel sheet 69 x 32.5 x 21 cm 109 x 32.5 x 21 cm M 612 080 032 S M 612 120 032 S 57.00 68.00 Insert for drawers for hanging files steel sheet maximum 2 for drawers width 80 cm maximum 3 for drawers width 120 cm 35 x 32.5 x 28 cm M 622 035 032 S 53.00 The accessories can always be used in existing corpora. adjustable intermediate floor Corpora can be equipped with different inserts. The inside of the corpora is Traffic black. 82 83
Insert for drawer for 25 CDs with stilt, magnetic steel sheet maximum 4 for drawers width 80 cm maximum 6 for drawers width 120 cm 16 x 32.5 x 7 cm M 614 016 032 S 36.00 Insert for drawer for 17 DVDs with stilt, magnetic steel sheet maximum 3 for drawers width 80 cm maximum 5 for drawers width 120 cm 21 x 32.5 x 7 cm M 624 021 032 S 38.00 The different inserts can be combined. The clear internal dimensions of the drawers are 65 and 105 cm. Insert for drawer for DIN A4 steel sheet maximum 2 for drawers width 80 cm maximum 4 for drawers width 120 cm 23 x 32.5 x 7 cm M 634 023 032 S 30.00 Insert for drawer with angled paper trays for DIN A4 steel sheet maximum 1 for drawers width 80 cm maximum 3 for drawers width 120 cm 34 x 32.5 x 7 cm M 644 034 032 S 105.00 Drawers can be equipped with different inserts. These are magnetic and so they are fixed on the drawer bottom. CDs and DVDs can be adjusted transversely in the inserts and so they can be scrolled comfortably. The inside of the corpora is Traffic black. 84 85
Table for horizontal wall profile Table legs screwed with adjustable feet 72 cm 80 x 80 x 72 cm 120 x 80 x 72 cm M 810 080 080... M 810 120 080... 361,00 465,00 Stellfuß Tables can be hung on the horizontal wall profiles. They are available in the width of 80 and 120 cm and in the depth of 80 cm. The height of the side is 8 cm and the height of the table is 72 cm. The total depth in the sideboard is the depth of the table 80 + 1 cm. The table is particularly suitable as a small, stable workplace. The horizontal wall profile must be installed at a height of 66 cm (hole). 86 87
Table M04 Table M 04 Everything is possible. The attraction of the Table M 04 is the visual lightness. The material strengths are extremely reduced and the construction is fully integrated into the tabletop. The characteristic is the single detail: adapter, which integrate the table legs into the table top and combine the two elements also visually. The program allows a variable use because of its restraint. Different surfaces and dimensions facilitate further integration into existing situations. Slight individual tables square, rectangular or round allowing by individual dimensions and different surfaces an easy integration into existing situations. 88 89
Article Dimensions Article no. Sales price excl. VAT Stand alone table square table legs steel powder-coated table top laminate table edge bamboo 75 x 75 cm 80 x 80 cm 90 x 90 cm M04 110 075 075... M04 110 080 080... M04 110 090 090... 1,013.00 1,030.00 1,050.00 Stand alone table rectangular table legs steel powder-coated table top laminate table edge bamboo 270 x 90 cm 270 x 90 cm 2 table legs centered 135/135 2 table legs offset 90/180 M04 210 270 090... M04 215 270 090... 2,174.00 2,174.00 Stand alone table square table legs steel powder-coated table top laminate table edge plywood Stand alone table rectangular table legs steel powder-coated table top laminate table edge bamboo 75 x 75 cm 80 x 80 cm 90 x 90 cm 150 x 75 cm 160 x 80 cm 180 x 90 cm M04 120 075 075... M04 120 080 080... M04 120 090 090... M04 210 150 075... M04 210 160 080... M04 210 180 090... 955.00 966.00 978.00 1,135.00 1,240.00 1,344.00 Stand alone table rectangular table legs steel powder-coated table top laminate 270 x 90 cm 270 x 90 cm 2 table legs centered 135/135 2 table legs offset 90/180 M04 220 270 090... M04 225 270 090... table edge plywood 2,006.00 2,006.00 Stand alone table rectangular table legs steel powder-coated table top laminate table edge plywood 150 x 75 cm 160 x 80 cm 180 x 90 cm M04 220 150 075... M04 220 160 080... M04 220 180 090... 1,103.00 1,192.00 1,204.00 The Tables M 04 can be mounted without tools. The table legs are screwed into the embedded adapter. Adjustable feet at each table leg allow to compensate uneven floors. On their underside is felt. The tables are available in many different sizes. If this is not sufficient the table sizes can be customized. From a table size of 180 x 90 cm the tables have 6 legs. The additional legs can be positioned in the center or offset. The table height is 74 cm. There are lower adjustable feet available for table height 72 cm. The edge of the table top is 5 mm bamboo natural oiled. If you choose plywood, the entire table top is in this version. Other table edges are available on request. 90 91
Article Dimensions Article no. Sales price excl. VAT Stand alone table round table legs steel powder-coated table top laminate table edge bamboo Ø 80 cm Ø 90 cm Ø 125 cm M04 310 080 080... M04 310 090 090... M04 310 125 125... 1,247.00 1,275.00 1,389.00 Bar table round table leg steel powder-coated table top laminate table edge bamboo 60 x 60 x 105 cm M04 410 060 060... 980.00 Stand alone table round table legs steel powder-coated table top laminate table edge plywood Ø 80 cm Ø 90 cm Ø 125 cm M04 320 080 080... M04 320 090 090... M04 320 125 125... 1,079.00 1,105.00 1,225.00 Bar table round table leg steel powder-coated table top laminate table edge plywood 60 x 60 x 105 cm M04 420 060 060... 817.00 The Tables M 04 can be mounted without tools. The table legs are screwed into the embedded adapter. Adjustable feet at each table leg allow to compensate uneven floors. On their underside is felt. The tables are available in many different sizes. If this is not sufficient the table sizes can be customized. The table height is 74 cm. There are lower adjustable feet available for table height 72 cm. The edge of the table top is 5 mm bamboo natural oiled. If you choose plywood, the entire table top is in this version. Other table edges are available on request. 92 93
Cable trough with adapter aluminium powder-coated 74 x 30 x 10.5 cm M04 610 074 030... 280.00 Cable trough with screen with adapter aluminium powder-coated 74 x 30 x 30.5 cm M04 615 074 030... 314.00 Cable chain with adapter plastic black per meter in any length Ø 4 cm M04 630 100 004 142.00 Drawers and CPU holders can be placed right or left seen of the user position. Drawer drawer aluminium powder-coated inserts steel powder-coated Traffic black 21,5 x 54 x 6,6 cm Inside 21 x 10.5 x 4 cm and 21 x 29.7 x 4 cm M04 620 021 054... 532.00 CPU holder aluminium powder-coated 21 x 46 x 46 cm M04 640 021 046... 280.00 The drawers and CPU holders are mounted on the right or left. The cable trough is centered under the table top on the long side of the tables. The cable chain can be mounted on the left or right side of the cable trough. Technical modifications reserved. All prices are non-binding price recommendations. Deliveries are exclusively effected pursuant our terms and conditions of business. From a selling price of 1,200.- excl. VAT the delivery is carriage paid. 94 95
Side table M05 Side table M 05 Everything is possible. The Side table M 05 of Thomas Merkel is a mixture of side table, low table and tray table. The series consists of 4 tables in 4 different heights with 4 diverse trays: square, round, oval and rectangular. All trays are removable. You can use the tables in front and beside a sofa or an armchair. As a single table or even when you need more space, you take another one or a third one and so on. The tables can be moved among themselves for needing less space because of their different heights. And if you do not need the things you put on the tables any more, you can put them back using the tray. Due to the free choice of colour you are always able to find the matching tables. 96 97
Article Article no. Sales price excl. VAT Table square tray steel powder-coated frame steel powder-coated Table round tray aluminium powder-coated fine structure or natural anodised or copper sanded or brass sanded frame steel powder-coated 31.8 x 31.8 x 58.5 cm Ø 35.8 cm x 52.5 cm M05 110 000 058 CM M05 120 000 052 WM M05 120 000 052 NE M05 120 000 052 UR M05 120 000 052 ZG 240.00 214.00 298.00 399.00 418.00 Table set A consisting of: table square, tray RAL 7038 table round, tray RAL 9016 table oval, tray birch table rectangular, tray RAL 7042 frames RAL 7005 M05 210 000 000 W 1,140.00 Table oval tray plywood birch natural varnished frame steel powder-coated 43.4 x 26.8 x 46.5 cm M05 130 000 046 FM 446.00 Table rectangular tray steel powder-coated frame steel powder-coated 40.5 x 25 x 40.5 cm M05 140 000 040 AM 240.00 C = Agate grey M = Mouse grey N = Aluminium natural E = Ironglimmer U = Copper R = Rust Z = Brass G = Bronze grey F = Birch The side tables are supplied disassembled. The necessary tool is in the delivery included. The frame is in three parts and consists of a base plate, a table leg and top plate. The top plate has an integral thread and is screwed on the table leg. The base plate is fixed with the attached screw to the table leg. Is the frame mounted, the tray is positioned. By magnetic points it is fixed on the frame. For hard floors felt points are included that can be fixed under the base plate. The tables can be individually combined with each other. Thanks to the different heights of the tables they can be pushed together to save space. The frames of the side tables are powder coated in the colour mouse grey. The trays are designed according to the shape of different materials and in different finishes and colours. The surfaces of copper and brass are untreated and are getting dull and a patina with time. Commercially appropriate care products are available. Agate grey RAL 7038 Mouse grey RAL 7005 98 99
Article Dimensions Article no. Sales price excl. VAT Frame square steel powder-coated 31.8 x 31.8 x 56.5 cm M05 310 000 056 M M05 310 000 056 P 136.00 149.60 Tray square steel powder-coated 31.8 x 31.8 x 2 cm M05 410 000 002 C M05 410 000 002 P 106.00 116.60 Frame round steel powder-coated Ø 35.8 cm x 50.5 cm M05 320 000 050 M M05 320 000 050 P M05 320 000 050 E M05 320 000 050 R M05 320 000 050 G 136.00 149.60 185.00 185.00 185.00 Tray round aluminium powder-coated fine structure or natural anodised or copper sanded or brass sanded Ø 35.8 cm x 2 cm M05 420 000 002 W M05 420 000 002 P M05 420 000 002 N M05 420 000 002 U M05 420 000 002 Z 80.00 88.00 115.00 216.00 235.00 Frame oval steel powder-coated 43.4 x 26.8 x 44.5 cm M05 330 000 044 M M05 330 000 044 P 136.00 149.60 Tray oval plywood birch natural varnished 43.4 x 26.8 x 2 cm M05 430 000 002 F 312.00 Frame rectangular steel powder-coated 40.5 x 25 x 38.5 cm M05 340 000 038 M M05 340 000 038 P 136.00 149.60 Tray rectangular steel powder-coated 40.5 x 25 x 2 cm M05 440 000 002 A M05 440 000 002 P 106.00 116.60 M = Mouse grey E = Ironglimmer R = Rust G = Bronze grey P = Special colour RAL C = Agate grey P = Special colour RAL N = Aluminium natural U = Copper Z = Brass F = Birch The frames of the tables can also be used individually. They are powder-coated in the colour mouse grey or can be individually manufactured according to RAL colours. Also the square, round and rectangular trays can be finished in RAL colours individually in addition to the standard colours. Agate grey RAL 7038 Mouse grey RAL 7005 Technical modifications reserved. All prices are non-binding price recommendations. Deliveries are exclusively effected pursuant our terms and conditions of business. From a selling price of 1,200.- excl. VAT the delivery is carriage paid. 100 101
Lotus table Lotus table Everything is possible. The appeal of the Lotus tables by Thomas Merkel is in the detail. Table top and legs seem to merge into each other and yet the legs can be removed for transport. This table program can be combined with many different chairs due to its reduced form language. Lightweight square or rectangular tables allow a use in different situations. Because of their restraint they adapt to the requirements and integrate into every environment. There are also versions available for outdoor use. 102 103
Lotus Table square Table top and legs steel powder-coated fine structure 80 x 80 cm ML 110 080 080... 693.00 Lotus Table square - outdoor Table top and legs stainless steel 80 x 80 cm ML 120 080 080... 900.00 Lotus Table rectangular Table top and legs steel powder-coated fine structure 160 x 80 cm 200 x 80 cm ML 210 160 080... ML 210 200 080... 944.00 1,105.00 Lotus Table rectangular - outdoor Table top and legs stainless steel 160 x 80 cm 200 x 80 cm ML 220 160 080... ML 220 200 080... 1,248.00 1,485.00 The table height is 72 cm. The Lotus Tables are supplied disassembled. The table legs are screwed with the table top. Adjustable feet at each table leg allow to compensate uneven floors. The thickness of the table top is 38 mm. In the outdoor variant the table is made of stainless steel. Table tops in special sizes and RAL colours are possible. 104 105
Side table Kaiser Side table Kaiser Everything is possible. The tables of two identical elements combine the exciting contrast of the low strength of the material of the table surface towards the voluminous pedestallike base. A play of geometric forms and the evolution of a 2-dimensional material towards 3-dimensional structure. Because of free choice of the color the tables can be adapted to the furniture. 106 107
Large Kaiser Steel with adjustable feet Ø 40 cm x 52.5 cm MK 100 040 052... MK 100 040 052 P 597.00 656.70 Small Kaiser Steel with adjustable feet Ø 60 cm x 32.5 cm MK 200 060 032... MK 200 060 032 P 698.00 767.80 W = Traffis white P = Special colour RAL The tables consist of two identical parts which are screwed together. Thus, they can be dismantled for thorough cleaning also. They are supplied assembled. The tables have adjustable feet to compensate uneven floors. The strength of the tabletop is 2 mm. The table surface of the small table is doubled. Special RAL colours are possible. 108 109
Side table Kanji Side table Kanji Everything is possible. The series of Side table Kanji is inspired by the characters of the Japanese language. Like the line weights vary with a bamboo pen in calligraphy so Kanji changes in the spatial observation: its shape is linear or flat depending on the angle. 110 111