COMPETENCY ANALYSIS PROFILE General Carpenter 403A. (All unshaded skill sets must be demonstrated/completed)

Similar documents
Carpenter Level 2 Rev. September 2017

Apprenticeship and Industry Training

Atlantic Workforce Partnership. Curriculum Standard CARPENTER. Version: 2016 Revised: N/A. Atlantic Apprenticeship

Appendix 3G Wood First Matrix

WORK PROCESSES SCHEDULE ACOUSTICAL CARPENTER SPECIALIST O*NET/SOC CODE: RAIS CODE: 0861

National Craft Assessment and Certification Program S P E C I F I C A T I O N S

2003 International Residential Building Code

CARPENTRY. Fundamentals Level One. Competencies / Objectives MODULE ORIENTATION TO THE TRADE

Structural Tests and Special Inspections Form. Inspection of Fabricators (1704.2)

Premier Inn, Wilson Street, Middlesbrough, TS1 1AE. Site progress report. February 2017

Davis Frame Co., Inc. Construction Budget Considerations

Steps in Building a Shed

DIVISION 05 METALS Commissioning of Metals STRUCTURAL METAL FRAMING Structural Steel Framing

Appendix A WORK PROCESS SCHEDULE AND RELATED INSTRUCTION OUTLINE

SOL UTIONS LIVING SOLUTIONS LIVING SOLUTIONS

STATE PREFERENTIAL PROPERTY TAX ASSESSMENT PROGRAM

RESIDENTIAL NEW CONSTRUCTION PLAN REVIEW CHECKLIST

NEW CONSTRUCTION ADDENDUM TO COA APPLICATION

Building Systems and Design Elements included in SliDeRulE

Smarter. Safer. Leaner.

Walking-Working Surfaces

INTERIOR FINISHES CHAPTER 8

RESIDENTIAL BUILDING PLAN REQUIREMENTS

CITY OF HAGERSTOWN PLANNING & CODE ADMINISTRATION DEPARTMENT. Submittal Requirements

SCREEN PORCHES 101 DEVELOPMENT RESOURCES, INC Permit Requirements

Concrete. Conveying Systems. Doors, Windows & Interiors

Anchor bolts ASTM F1554, Gr. 36 Wide flange beams ASTM A992, Fy = 50 ksi Misc. structural steel ASTM A36, Fy = 36 ksi

Statement of Special Inspections Michigan Building Code 2012 (MBC 2012)

SECTION HANGERS AND SUPPORTS FOR PLUMBING

Elevated Slab Sequence

CALIFORNIA COMMERCIAL BUILDING INSPECTOR CONTENT OUTLINE 01. GENERAL ADMINISTRATION 6% Project Administration 1%

SECTION STAY-IN-PLACE INSULATED CONCRETE FORMING SYSTEM

OSU PROJECT NO PAGE 1 02 NOV 2006 SECTION SUPPORTS AND ANCHORS

CONTENTS. Using Advanced CAD to Create 2D and 3D Objects in Chief Architect 1. Introduction..2

The Cabin Shell Series

SECTION STEEL DECKING

BUILDING PERMIT INFORMATION GUIDE FOR THE HOMEOWNER

SECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT

THE UNIVERSITY OF ALABAMA AT BIRMINGHAM (UAB) BIRMINGHAM, ALABAMA

A 16' x 28' Cottage with two lofts and a bedroom addition. Plans can be modified for simple or expanded layouts.

SECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT

INTERIOR FINISHES CHAPTER 8

HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT SECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT

Basic Information for Obtaining Permits, Submitting Plans, Scheduling Inspections, etc.

Daytona Beach Pier Building Renovation Jun 2010

The City of Winnipeg SECTION ST. VITAL LIBRARY RENOVATION PROJECT 6 FERMOR AVE. Page 1 of 5

The Homeowner s Building Application Checklist for Constructing a Residential Addition

LEVEL TWO NUMBERS AND TITLES. Introductory Information. Bidding Requirements. Contracting Requirements. Facilities and Spaces. Systems and Assemblies

Residential Building Inspections

SECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT

Wall Panels. Structural wall panel. Architectural wall panel. Cladding wall panel. Sandwich wall panel

LINCOLN COUNTY REQUIRED INSPECTIONS (Last updated August 23, 2017)

Reliant Holdings Ltd Safety Management System

THE STRATA UNIT May 25, 2008

HOUSE REPAIRS & RENOVATIONS BUILDING PERMIT REQUIREMENTS

INTERIOR FINISHES CHAPTER 8

AISC Steel & Timber Research for High-Rise Residential Buildings

Project #1139 Budget #82. $ Budgeted $ Billed to Date $ Paid to Date $ Due 210, , , ,158.50

Project Address: Name of Person Completing Form:

STRUCTURAL ABBREVIATIONS S-001 GENERAL NOTES CONCRETE MASONRY NOTES DESIGN NOTES SOF NSWG-10 UAS SUPPORT FACILITY FY 2016 MILCON P-225

SPACE TYPE: OUTSIDE PARKING (STRUCTURE)

RESIDENTIAL CONSTRUCTION New Dwellings and Additions

One and Two Family Additions

INTERNSHIP REPORT GOUTHAM.J

SoftWall Partitions and Curtains

PENNSAFE BUILDING INSPECTION SERVICES LLC PERMIT APPLICATION

St. Louis County Department of Public Works Division of Code Enforcement. When is a Building Permit required for Residential Projects?

Residential fall protection

GETTING STARTED... 2 YOUR LIST OF PRODUCTS... 2 WHAT THAT LIST BECOMES... 2 PRODUCTS CREATED AS ENVISIONEER ELEMENTS... 3

SECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT

DETAIL DRAWINGS. RASTRA is a stay-in-place insulated concrete. form that is structurally strong, energy-efficient,

SECTION HANGERS AND SUPPORTS PART 1 - GENERAL. A. Drawings and Division 1 Specification Sections, apply to this Section.

Alberta Bridge Inventory STANDARD BRIDGE & CULVERT COMPONENTS. Standard Bridges. Typical Bridge Components. In Alberta there are about 13,300 bridges.

Totaling approximately 617,000

Applying for Permits to build a new house in Linn County

Project s fiche INOV. Frisomat Case study project's fiche INOV

The Ashland Project. Total Area: 1,778 Sq.Ft. 3 Bedroom, 2 Bath, 2 Car Garage

Section Safety Section Cleanup. None Required

References. EM , Sections 22 OSHA 29CFR (Subpart L ) UFGS [Latest] ANSI A

Loseke Technologies, Inc. p r e s e n t s

HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT

Mobile Light No HABS No. ALA-780 (Middle Bay Light) Middle of Mobile Bay ' Mobile County ' Alabama HABS ALA, U9-M0BI, 116-

EMERGENCY MANAGEMENT PREPAREDNESS AND ASSISTANCE TRUST FUND ARC 4496 Evaluation Questionnaire

DOUBLE-WIDE SUPPORT PIER PLAN (TYPICAL)

ALL STEEL SHED FRAMES

CONSTRUCTION AND RENOVATION FUNDED BY THE CFI EXAMPLE OF A DETAILED COST ALLOCATION METHOD

Colorado Chapter of the International Conference of Building Officials. Building Guide. The Colorado Chapter of the International

FACT SHEET #2 DECK INFORMATION

Building Codes and Ordinances ARC 227

Scaffolding. Safety Guide. STOP! Before you climb

Structural System. Design Criteria Fire Resistance Concrete designed for 2 HR rating (worst case) Geotechnical Report Allowable Bearing Capacity

STANDARD PRACTICE INSTRUCTION

UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:

The Contractor is responsible for quality control, including workmanship and materials furnished by his subcontractors and suppliers.

REQUIREMENTS FOR SUBSTANTIALLY DAMAGED AND SUBSTANTIALLY IMPROVED STRUCTURES

CONSTRUCTION SMARTSCREEN

Alberta Construction Trade Definitions

Transcription:

COMPETENCY ANALYSIS PROFILE General Carpenter 403A (All unshaded skill sets must be demonstrated/completed) PROTECT SELF AND OTHERS Apply safety legislation Use personal protective equipment Apply safety measures in the shop and on the job site Apply prescribed procedures at an accident or a hazard Apply fire safety practices 1451.0 1451.01 1451.02 1451.03 1451.04 1451.05 ladders Set up ladders Work on ladders Maintain ladders Use rigging equipment 1451.06 1451.07 1451.08 1451.09 1451.10 Use swing stages Use powered elevated work plat Use spiders and bosun chairs 1451.11 1451.12 1451.13 OPERATE TOOLS AND EQUIPMENT Use hand tools Operate portable power tools Operate stationary power tools and equipment Design jigs and templates Use pre-fabricated and fabricated jigs and templates 1452.0 1452.01 1452.02 1452.03 1452.04 1452.05

ESTABLISH BUILDING PROCEDURES Perform traderelated calculations Prepare sketches Uses plans and sketches Communicate with co-workers, supervisors and other tradespersons Apply trade-related written and spoken information 1453.0 1453.01 1453.02 1453.03 1453.04 1453.05 Establish procedures for installing premanufactured materials or equipment Manage work site Estimate material 1453.06 1453.07 1453.08 PREPARE SITE FOR BUILDING Prepare site for layout Lay out buildings according to plot and foundation plans Lay out piling and caissons for foundations and shore protection Install piling and caissons for foundations and shore protection Install shoring for trench, road and building stabilization 1454.0 1454.01 1454.02 1454.03 1454.04 1454.05 Prepare ground for preserved wood foundation (PWF) and slab on grade Install underpinning Plan access and egress on job site 1454.06 1454.07 1454.08

EXECUTE FORM WORK Lay out embedded steel embedded steel Install embedded steel Lay out footing footing 1455.0 1455.01 1455.02 1455.03 1455.04 1455.05 Install footing Lay out for columns, piers and capitals for columns, piers and capitals Install for columns, piers and capitals Lay out wall 1455.06 1455.07 1455.08 1455.09 1455.10 wall Install wall Lay out templates to receive dowels and anchor bolts Build templates to receive dowels and anchor bolts Lay out beam and girder 1455.11 1455.12 1455.13 1455.14 1455.15 beam and girder Install beam and girder Lay out shoring shoring Install shoring 1455.16 1455.17 1455.18 1455.19 1455.20 Lay out suspended slab Install suspended slab Lay out slab-ongrade Install slab-ongrade Lay out stair 1455.21 1455.22 1455.23 1455.24 1455.25 stair Install stair Lay out for ramps and runways for ramps and runways Install for ramps and runways 1455.26 1455.27 1455.28 1455.29 1455.30 Lay out slip slip Install slip Lay out various movable wall form various movable wall form 1455.31 1455.32 1455.33 1455.34 1455.35

EXECUTE FORM WORK - Cont d Install various movable wall form Lay out to encase structural steel Build to encase structural steel Install to encase structural steel Lay out insulated concrete 1455.0 1455.36 1455.37 1455.38 1455.39 1455.40 insulated concrete Install insulated concrete Strip concrete Perform slump test on concrete Re-shore completed structures 1455.41 1455.42 1455.43 1455.44 1455.45 Store Place concrete Consolidate concrete Finish concrete Control rate of curing concrete 1455.46 1455.47 1455.48 1455.49 1455.50 Lay out locations of pre-cast and pre-stressed concrete Install pre-cast and prestressed concrete Lay out grout grout Install grout 1455.51 1455.52 1455.53 1455.54 1455.55

FRAME FLOORS AND WALLS Lay out preserved wood foundation (PWF) preserved wood foundation (PWF) Install preserved wood foundation (PWF) Lay out floor Install floor 1456.0 1456.01 1456.02 1456.03 1456.04 1456.05 Lay out walls for platform-style walls for platform-style Install walls for platform-style Lay out walls for balloon-style walls for balloon-style in 1456.06 1456.07 1456.08 1456.09 1456.10 Install walls for balloon-style Lay out energyefficient Lay out modular factory prefabricated units modular factory prefabricated units Install modular factory prefabricated units 1456.11 1456.12 1456.13 1456.14 1456.15 acoustic fire cavity and party walls Frame allowances for building services and utilities 1456.16 1456.17

FRAME ROOFS AND CEILINGS Lay out equal slope roofs equal pitch roofs Install equal pitch roofs Lay out ceiling joists and backing Install ceiling joists and backing 1457.0 1457.01 1457.02 1457.03 1457.04 1457.05 Lay out unequal pitch roofs unequal pitch roofs Install equal and unequal pitch roofs Lay out preengineered sitebuilt preengineered sitebuilt 1457.06 1457.07 1457.08 1457.09 1457.10 Lay out manufactured Install manufactured Lay out a roof system for dormer openings dormer openings Install dormer openings 1457.11 1457.12 1457.13 1457.14 1457.15 Lay out dormers dormers Install dormers Lay out a roof system for skylight openings skylight openings 1457.16 1457.17 1457.18 1457.19 1457.20 Install skylight openings Lay out flat roofs flat roofs Install flat roofs Lay out ornamental roofs 1457.21 1457.22 1457.23 1457.24 1457.25 ornamental roofs Install ornamental roofs Install roof substrate 1457.26 1457.27 1457.28

CONSTRUCT HEAVY FRAMING Lay out heavy floor heavy floor Install heavy floor and lay floor planking Lay out wood post and beam wood post and beam 1458.0 1458.01 1458.02 1458.03 1458.04 1458.05 Install wood post and beam Lay out roof frame for post and beam structure roof frame for post and beam structure Install roof frame for post and beam structure Lay out wall fill-in for post and beam structure 1458.06 1458.07 1458.08 1458.09 1458.10 wall fillin for post and beam structure Install wall fill-in for post and beam structure Lay out timber timber Install timber 1458.11 1458.12 1458.13 1458.14 1458.15 Lay out position of on a wall Lay out ramps, runways, chutes, splash-boards, and bents (trestles) ramps, runways, chutes, splash-boards, and bents (trestle) Install ramps, runways, chutes, splash-boards, and bents (trestles) Lay out pole barns 1458.16 1458.17 1458.18 1458.19 1458.20 pole barns 1458.21

BUILD STAIRS Lay out straight straight Install straight Lay out landings for landings for 1459.0 1459.01 1459.02 1459.03 1459.04 1459.05 Install landings for Lay out winder winder Install winder Lay out prefabricated 1459.06 1459.07 1459.08 1459.09 1459.10 prefabricated Install prefabricated Lay out newel posts, handrails and balustrades newel posts, handrails and balustrades Install newel posts, handrails and balustrades 1459.11 1459.12 1459.13 1459.14 1459.15 INSTALL DOORS, FRAMES AND HARDWARE Lay out frames and movable partitions. frames and movable partitions. Install frames and movable partitions Lay out door door 1460.0 1460.01 1460.02 1460.03 1460.04 1460.05 Install door Lay out overhead doors, rollup shutters and roll-up doors Install overhead doors, rollup shutters and roll-up doors Lay out manual and electricalactivated hardware Install manual and electrical-activated hardware 1460.06 1460.07 1460.08 1460.09 1460.10 INSTALL WINDOWS Install exterior window Lay out interior windows interior windows Install interior windows 1461.0 1461.01 1461.02 1461.03 1461.04

INSTALL EXTERIOR FINISHING MATERIALS Lay out exterior siding and trim siding Install siding trim Install exterior siding and trim 1462.0 1462.01 1462.02 1462.03 1462.04 1462.05 Lay out cornice cornice Install cornice Lay out roof coverings, roof vents and flashing roof coverings, roof vents and flashing 1462.06 1462.07 1462.08 1462.09 1462.10 Install roof coverings, roof vents and flashing Lay out exterior decks exterior decks Install exterior decks 1462.11 1462.12 1462.13 1462.14 INSTALL FINISHED MATERIALS TO WALLS AND CEILINGS Lay out wall and ceiling for finishes wall and ceiling for finishes Prepare wall and ceiling for finishes Install acoustic and thermal insulation and vapour barriers Apply energyefficient construction techniques 1463.0 1463.01 1463.02 1463.03 1463.04 1463.05 Lay out wall and ceiling coverings wall and ceiling coverings Install wall and ceiling coverings Lay out suspended ceiling suspended ceiling 1463.06 1463.07 1463.08 1463.09 1463.10 Install suspended ceiling 1463.11

INSTALL INTERIOR FINISHING MATERIALS AND HARDWARE Lay out vertical trim horizontal and vertical trim Install horizontal and vertical trim Lay out millwork millwork 1464.0 1464.01 1464.02 1464.03 1464.04 1464.05 Install millwork Lay out prefabricated kitchens, bathrooms, vanities and countertops Install prefabricated kitchens, bathrooms, vanities and countertops Lay out wood, composite and other manufactured finished and unfinished floors and accessories, underlay, and special base preparations wood, composite and other manufactured finished and unfinished floors and accessories, underlay, and special base preparations 1464.06 1464.07 1464.08 1464.09 1464.10 Install wood, composite and other manufactured finished and unfinished floors and accessories, underlay, and special base preparations Lay out demountable wall demountable wall Install demountable wall Dismantle demountable wall 1464.11 1464.12 1464.13 1464.14 1464.15 Lay out arena seating arena seating Install arena seating Select materials to receive finishes Lay out interior hardware 1464.16 1464.17 1464.18 1464.19 1464.20 Install interior hardware 1464.21

PERFORM LANDSCAPE AND SITE WORK Lay out fences, guard rails, blast walls, protective barriers, sound barriers and retaining walls fences, guard rails, blast walls, protective barriers, sound barriers and retaining walls Install fences, guard rails, blast walls, protective barriers, sound barriers and retaining walls Lay out benches and timber steps benches and timber steps 1465.0 1465.01 1465.02 1465.03 1465.04 1465.05 Install benches and timber steps Lay out docks, piers, bridges and gazebos docks, piers, bridges and gazebos Install docks, piers, bridges and gazebos Lay out traffic and pedestrian control 1465.06 1465.07 1465.08 1465.09 1465.10 traffic and pedestrian control Install traffic and pedestrian control Lay out recreational site recreational site Install recreational site 1465.11 1465.12 1465.13 1465.14 1465.15 PERFORM RENOVATIONS Protect existing structures Remove interior finishes and exterior finishes Alter existing structures Lay out new structural new structural 1466.0 1466.01 1466.02 1466.03 1466.04 1466.05 Install new structural 1466.06

ERECT AND DISMANTLE SCAFFOLDS Lay out wood scaffolds wood scaffolds Install wood scaffolds Dismantle wood scaffolds Lay out sectional frame access 1467.0 1467.01 1467.02 1467.03 1467.04 1467.05 sectional frame access Install sectional frame access Dismantle sectional frame access Lay out rolling rolling 1467.06 1467.07 1467.08 1467.09 1467.10 Dismantle rolling Lay out tube and clamp tube and clamp Install tube and clamp Dismantle tube and clamp 1467.11 1467.12 1467.13 1467.14 1467.15 Lay out system system Install system Dismantle system hanging scaffolds 1467.16 1467.17 1467.18 1467.19 1467.20 CUT AND WELD MILD STEEL Cut mild steel using quick cut, grinder, metal cutoff saw and reciprocating saw Set up oxy-fuel cutting equipment Cut mild steel with oxy-fuel equipment Set up shielded metal arc welding equipment Prepare for welding 1468.0 1468.01 1468.02 1468.03 1468.04 1468.05 Weld with the shielded metal arc welding (SMAW) process 1468.06

PROTECT THE ENVIRONMENT Reduce waste production Reuse materials Recycle waste materials Prevent toxic spills and emissions 1469.0 1469.01 1469.02 1469.03 1469.04