Fire-Resistant Hydraulic Fluids
Anhydrous Fire-Resistant Hydraulic Fluids (HFD) Houghton anhydrous fluids are based on highquality esters and formulated with antioxidants to be thermally and chemically stable, ensuring excellent fluid performance and long life without system change-out. Cosmolubric HF Series Polyol Esters (HFDU) Cosmolubric HF Series fluids are synthetic polyol ester hydraulic fluids that are chemically and thermally stable. They are designed for long service life and dependable performance in areas where a less flammable hydraulic fluid is required. The additive package in these fluids provides the best possible mechanical performance, providing corrosion protection, metal passivation, hydrolytic stability and oxidation inhibition. These products are available in two viscosity grades: ISO VG 46 and ISO VG 68. Cosmolubric B Series Vegetable Oil-Based Fluids passivation and oxidation inhibition, even when abused in service. They are primarily composed of renewable source materials and are therefore USDA-certified as bio-based products. These products have virtually zero toxicity to the environment and aquatic life, making them ideal for outdoor mobile hydraulic equipment and other environmentally sensitive equipment. Cosmolubric B Series products have passed Vickers 35VQ mobile equipment pump test and FZG load stage 12 test, making our B Series well suited for rolling mill automatic gauge control systems, coilers and continuous casting equipment. Houghto-Safe 1000 Series Phosphate Esters (HFDR) Houghto-Safe 1000 Series fluids are phosphate ester fluids that display excellent lubricating properties and operate at high pressures and at temperatures up to 150 F. They are Factory Mutual-approved for operation in all types of pumps and hydraulic components. Cosmolubric B Series fluids are the latest development in our line of fire-resistant hydraulic fluids. Derived from vegetable oils, these fluids are fire resistant and formulated to enhance corrosion protection, metal
Fire-Resistant Hydraulic Fluids for High Temperatures and Extreme Conditions Houghton International is the world s largest and fastestgrowing producer of fire-resistant (FR) hydraulic fluids. Houghton began developing fire-resistant hydraulic fluids in the early 1950s in response to industry s movement to provide a greater level of operating safety in hydraulic systems. It quickly became evident that conventional petroleum-based hydraulic oils were potential hazards when leaks, line ruptures or other mechanical failures exposed them to ignition sources. Houghton s fire-resistant hydraulic fluids reduce the risk of combustion. Seven decades of use worldwide have proven them to be safe, reliable, economical and environmentally friendly. Today, Houghton ships more than 20 million gallons of FR hydraulic fluids a year and has an installed base of 200 million gallons in a wide variety of industrial hydraulic equipment. Houghton backs its products with extensive ongoing technology and lab support services. We are the only manufacturer to offer every type of water-based and anhydrous FR hydraulic fluid, including water glycols, high water content fluids (HWCF), polyol esters, phosphate esters and vegetable oil-based products. And our products are approved by Factory Mutual Insurance Company for fire resistance. Houghton FR hydraulic fluids help: Reduce operating costs, increase plant efficiency, and extend equipment life. Meet and/or exceed fire safety regulations and improve employee and plant safety. Reduce insurance premiums. Significantly reduce long-term fluid costs. These products are used in numerous applications including automotive, food and beverage, foundry, die casting, steel processing, non-ferrous production and mining. Cosmolubric HF-130 and Cosmolubric B-230 are approved by the Mine Safety and Health Administration (MSHA).
Water-Based Fire-Resistant Hydraulic Fluids Water-based fluids are the most cost-effective option for hydraulic equipment. Metal producers and food processors choose Houghton water glycols because they are extremely stable and can be used at lower ambient temperatures. Houghto-Safe Water Glycol Fluids (HFC) Steel producers, automobile manufacturers and food processors around the world choose Factory Mutual-approved Houghto-Safe water glycols because they provide the optimum combination of fire resistance, performance and economy. Houghton has developed a variety of water glycol fluids for specific industry needs, including fluids that meet Military Specification MIL-H-22072 and fluids approved for incidental food contact. These products can be used in applications well below freezing. Hydrolubric High Water Content Fluids (HFA) Hydrolubric 120 Series products are synthetic water additives designed to meet the needs of central water systems using reciprocating plunger, multistage centrifugal or multi-stage gear pumps. The polarity of the synthetic components in these products provides a film on metal surfaces that effectively reduces friction coefficients, enhancing lubricity and protecting against aqueous corrosion. Shipped as concentrates, they are: Typically used at 2% 5% concentration. Readily dispersible in water. Biodegradable, offering advantages in handling and disposal when compared to conventional soluble oils. These products are frequently used in steel mills, foundries and automotive tire production. When subjected to winter ambient temperatures, antifreeze protection can be applied.
Worldwide Coverage One Company. With over 2,000 employees located across the globe, Houghton provides global coverage to companies in metal working, automotive, steel and a variety of other industries as the premier supplier of industrial fluids and chemical management services. We help our customers around the world find new ways to save on overall process chemical and disposal costs while continually improving their production and part quality. Material Compatibility Houghton FR Fluids are compatible with a wide range of materials. If you do not see a particular material, please contact us. Material Houghto-Safe Water Glycol Fluids Houghto-Safe 1000 Series Phosphate Esters Hydrolubric High Water Content Fluids Cosmolubric HF Series Polyol Esters Cosmolubric B Series Vegetable Oil-Based Fluids Metals, Ferrous C C C C C Metals, Bronze LC2 C LC2 LC2 LC2 Metals, Zinc NC C NC C C Metals, Cadmium NC C NC C C Metals, Lead NC C NC NC NC Metals, Brass, Copper C C C C C Metals, Aluminum, Unanodized Metals, Aluminum, Anodized NC C NC C C C C C C C Rubber, Neoprene C NC C NC NC Rubber, Buna-N C NC C C C Rubber, Butyl C C C NC NC Rubber, EPR C C C NC NC Rubber, Polyurethane LC3 NC LC3 C C Rubber, Silicone C C C C C Rubber, Teflon C C C C C Rubber, Viton C C C C C Filter Media, Cellulosic, Phenolic Treated C C C C C Filter Media, Fiberglass C C C C C Key C = Compatible LC = Low or marginal compatibility NC = Not compatible 2 = Bronze with lead content over 20% limited to 120 F 3 = Compatibility marginally good, some sources better than others Corporate Headquarters Houghton International Inc. Madison & Van Buren Avenues P.O. Box 930 Valley Forge, PA 19482-0930 Phone: 610-666-4000 Fax: 610-666-1376 info@houghtonintl.com www.houghtonintl.com Americas USA Canada Mexico Argentina Brazil Chile Columbia Peru Venezuela Europe Czech Republic Denmark Finland France Germany Ireland Italy Netherlands Norway Poland Romania Russia Spain Sweden Turkey Ukraine UK Asia & Pacific Australia China Hong Kong India Japan Malaysia Singapore South Korea Taiwan Thailand Africa Nigeria South Africa HI 10003 14.01 US