Featuring. Devices made with CuVerro Antimicrobial Copper Surfaces. EPA registered touch surfaces

Similar documents
Features 1.34 In Width X 1.53 In Height X 1.13 Recp gang Stainless Steel/304 Stainless Steel

HARDWARE MADE WITH BACTERICIDAL COPPER

February 3, 2014 hs-mf

WALLPLATES. Screwless Wallplates. Plastic Wallplates M4-M9. Metal Wallplates M10-M14 M-1

Antimicrobial Copper Touch Surfaces

SECTION GFCI Personnel Safety Devices

55 Industrial Park Road Boothbay, ME USA

why your next CO 2 incubator should be 100% pure copper

Neodymium Magnet Range

Antimicrobial Surfaces to Prevent Healthcare-Associated Infection

ORDERING INFORMATION: P/N K S 5 E U x CAT. 5e TOOLLESS RJ45 KEYSTONE JACKS (UNSHIELDED) P111

Distinctive Characteristics

Cooling Tower Water Treatment. 30A avenue du Pacifique Laval Qc.H7N 3X5 Téléphone

Bulletin 800F Plastic and Metal Operators 22.5 mm mounting hole IP65/66, Type 4/4X/13 Internationally rated operators

TEMPERATURE SWITCHES AND THERMOSTATS

Will accommodate up to 35 conductors while maintaining separation required to withstand instrumentation voltages

1-1/2 LB FM7 CND BD ELECTRO ZINC PLATED DICHROMATE EPOXY POWDER COATED

DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7

50 Watt Low Profile LED Canopy Light V AC - Motion Sensor - IP65 Rated

Bonding Leads. Metal Braids FLAT ROUND ROPES BONDING LEADS POWER SHUNTS. The answer to your cable management needs. INTRODUCTION

RJ Vista. EMI Quiet. Right Angle. Top Entry

SECTION (Master Template Final-05) ELECTRICAL BOXES. A. Provide boxes for electrical equipment and wiring devices as follows:

Technical Specification for LV ABC Fuse Switch Disconnectors

General Specifications

4CS12 4CS-1/2 4X1-7/8D Handybox. Features. Dimensions and Weight. Long Description. Catalog Number

Comparison of the speed of kill of pathogenic bacteria using ACTICOAT and AQUACEL Ag analysed using Confocal Laser Scanning Microscopy

Height Finish Pole Options. Series Optics Mounting Lamping Finish Voltage. Metal Halide HPS. H w H070 70w H w H w

Project: Type: Qty: Optics. Series. Reflector Mounting Lamping Finish Voltage Options BLC - S BLC-L 21 1 /4" 36 1 /4" 3 1 /2" O.D.

( )

Optics Mounting Lamping Finish Voltage Options. T6 Metal Halide* H039T6 1 39wT6 H070T6 2 70wT6. H w H070 70w H w

SECTION GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY

TEMPORARY PROTECTIVE GROUNDING EQUIPMENT

WIREMOLD Pedestal Style Poke-Thru Devices

Contents. The Range The Finishes Application...09

Small Terminals. TEST CURRENT (Amps) Fig 1. Tensile strength of YAD HYLUG after axial rotation stresses. TENSILE STRENGTH IN POUNDS

THE ANTIBACTERIAL SURFACE FOR INTERIOR DESIGN PROJECTS

General Specifications

8,000 facilities count on it

3M D Sub Socket 50 Position 8350 Series

Inactivation of Emerging Pathogens and Continuous Room Decontamination Technologies

Trust but verify: Ensure product quality at all stages of production

Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties

Section # 2. Assembly Fasteners. ICCA Assembly Fasteners - Section # 2 #

ALLIANCE weld pins are used in conjunction with ALLIANCE self-locking washers to complete the insulation fastening operation.

SECTION DECORATIVE METAL FENCES AND GATES

GETINGE 633HC STEAM STERILIZERS. Always with you

Previous Page Return to Index Next Page

BUSWAY LOW VOLTAGE (POW-R-WAY III) SECTION SECTION 16466

SELECTION GUIDE Appearance Sensing distance Operation Mode Connector Shape example (M8) Outer diameter (Ferrous material only) Wiring Output Output no

Machinability is the ease with which a given material may be worked with a cutting tool

Steel Octagon Boxes & Ceiling Pans

Portalcast Block Cutting and Casting System. Quickly cut and cast a precision mold and mount the casting to a blocking tray.

PLCC Sockets Through Hole - M43 Series

Hydro-Service. Superior corrosion resistance for chain.

Galvanic Corrosion Prevention Guide for Water Cooling Systems

3M Card Connector SD Normal Polarization, Push-Push, Surfacemount SD Series

Galvanic and Stray Current Corrosion

ANTIMICROBIAL. AlphaSan A SILVER BASED ANTIMICROBIAL FROM MILLIKEN CHEMICAL

SECTIONAL DOOR SYSTEMS

Welding Accessories

HYDROMATIC W/D/V-A1 SUBMERSIBLE SUMP/EFFLUENT

Applied Maintenance Supplies & Solutions

Compact Electro Plating Machine - CEPM-2A USER MANUAL

Prevention of Transmission of the Superbug Carbapenem-Resistant Enterobacteriaceae (CRE) during Gastrointestinal Endoscopy

Ruff-IN pre-fab systems

Small-Scale Resistance Welding for Medical and Industrial Applications

Specification Drainage Engineering Guide. Hydrants.

The Canadian Electrical Code (Saskatchewan Amendments) Regulations, 1999

INSTALLATION INSTRUCTIONS FOR ELECTRICAL CONTRACTORS

VPL-3200B Residential Vertical Platform Lift Technical Specifications

ASME VALVE BODY MATERIAL TYPES/EQUIVALENTS & PRESSURE/TEMPERATURE RATINGS

Cast Irons, Ductile Irons & Malleable Irons

Evaluation of Aluminum Cable Presentation for IEEE OCS September 14, 2011 Breck Booker, Southwire

SILVER BRAZING Alloys and Fluxes Product Guide

BULLETIN SUBJECT: GENERAL BULLETIN, 2015 SASK INTERPRETATIONS CORRECTIONS, AND ELECTRIC SERVICE REQUIREMENT CHANGES OR ADDITIONS

thermoweld The Contractors Choice GREAT PRODUCTS GREAT SERVICE GREAT PEOPLE

PRESTON HEALTH SERVICES ARCHITECT'S NO. 2700

1NT SERIES Fixed Temperature Thermostats

Engineering Solutions For All Your Hang-Ups GARMENT CONVEYOR CATALOGUE GC-09.

Modular CABANA Kit 16 x 16 (6x6) Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper

Study Title Antibacterial Efficacy of Bio-Care Technology's Non-Porous Test Substance

The Leader in Oilfield Coating Technology ISO 9001:2008.

min. 50min. 65min. PIT / P3 / P4 Ø

UTILUX CABLE MANAGEMENT

DISCONTINUED CFL. Specifications. Compact Floodlights revision 11/13/14 kl_cfl_spec.pdf. Fixture Options: Approvals: Job: Fixture Catalog number:

AVX Specialty Catalog

Commercial products. PRE-formance Giving you the convenience of a pre-fabricated product - plus the flexibility to accommodate job site requirements

1/17/2005 FAQ - Sothebys doc 1

INDUSTRIAL FILTRATION EQUIPMENT LWS Filter Series

Power Supply Featuring OMRON s Unique, New Undervoltage Alarm Function with Compact Body Contributing to Machine Downsizing

Evolution Series. 8" Poke-Thru Devices I N S T A L L A T I O N I N S T R U C T I O N S. IMPORTANT: Please read all instructions before beginning.

D I S T R I B U T E D V A L V E S. TECHNO Multi-Purpose Check Valves for Industry TECHNO

Disinfection. J. Darrel Hicks, BA, CHESP, REH. Author of Infection Prevention for Dummies

Table 2: Salt fog exposure testing Epoxy Salt fog exposure

Pedestal Style Poke-Thru Devices from Wiremold/ Legrand

1. Telecommunications mounting elements. 2. Backboards. 3. Telecommunications equipment racks and cabinets. 4. Grounding.

The Industry Source for High-Quality Electronic Products & Assemblies

E-Z-Ground Grounding Systems. Ground Wire Size. Water Pipe Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB

SYSTEM 1E LIQUID CHEMICAL STERILANT PROCESSING SYSTEM

Rivet nut fully installed

Transcription:

Featuring Devices made with CuVerro Antimicrobial Copper Surfaces EPA registered touch surfaces

Made with CuVerro Antimicrobial Copper Surfaces The Arrow Hart line of switches and wallplates featuring EPA registered Surfaces that, when cleaned regularly, deliver continuous and ongoing antibacterial* action, remaining effective in killing greater than 99.9% of bacteria* within 2 hours Why Clean Is Critical Healthcare Facilities Educational Facilities Commercial Kitchens & Hospitality Problem: Hospital Acquired Infections (HAI s) are a growing concern among hospitals everywhere 1 in 2 patients contract an HAI causing up to 1, deaths each year 1 Approximately $45 Billion is spent annually for treatment of HAI s 1 Outbreaks can and do happen outside of healthcare facilities Foodborne disease causes approximately 76 million infections contributing to 5, deaths annually 2 Educational facilities and public buildings provide ideal conditions for spreading infectious bacteria 2 Solution: Arrow Hart products made with CuVerro touch surfaces that, when cleaned regularly, continuously kill bacteria* left behind by dirty hands, killing more than 99.9% of bacteria* within 2 hours CuVerro is an EPA registered copper-based alloy that helps to inhibit buildup and growth of bacteria* within 2 hours of exposure between routine cleaning and sanitizing steps EPA testing conducted under Good Laboratory Practices has shown that copper alloys significantly and consistently reduce the amount of bacteria living on high-touch surfaces From healthcare settings to educational, hospitality and public facilities, when cleaned regularly, CuVerro continuously reduces bacteria* contamination, achieving 99.9% reduction within 2 hours of exposure *Laboratory testing shows that, when cleaned regularly, CuVerro antimicrobial copper surfaces kill greater than 99.9% of the following bacteria within 2 hours of exposure: MRSA, Staphylococcus aureus, Enterobacter aerogenes, Pseudomonas aeruginosa, and E. coli O157:H7. CuVerro antimicrobial copper surfaces are a supplement to and not a substitute for standard infection control practices and have been shown to reduce microbial contamination, but do not necessarily prevent cross contamination; users must continue to follow all current infection control practices, including those practices related to cleaning and disinfection of environmental surfaces.cuverro is a registered trademark of GBC Metals, LLC and is used with permission, CW-13-127. Not approved for direct food contact or food packaging uses. (1) Centers for Disease Control and Prevention (CDC) October 29. (2) Centers for Disease Control and Prevention (CDC) October 2. 2

Colony forming units (CFUs) Cleaner Environments CuVerro surfaces continuously reduce bacterial* contamination, achieving 99.9% reduction within 2 hours of exposure What is CuVerro? CuVerro is a new type of touch surface material designed specifically for areas where cleanliness is a concern. When cleaned regularly, kills more than 99.9% of bacteria* within 2 hours and continues to kill 99% of bacteria* even after repeated contamination Registered by the U.S. Environmental Protection Agency (EPA) as a surface that continuously kills bacteria* within 2 hours 1% copper-based alloy Professional medical grade appearance that is tarnish resistant Poses no threat to human health Continuously kills bacteria* between touches and regular cleanings Million CFU at start: 14.8 Copper EPA Test 1: Kills Pathogens Within 2 Hours 13.2 3 6 9 Stainless steel 18 Minutes 27 1,, 8,133, 7,5, 36 5,, 2,5, 15,, 12,5, CFU-Colony Forming Units Remaining MRSA bacteria* on touch surfaces after 6 hours MRSA Survival on CuVerro Stainless Steel and Silver-Coated Surfaces 1,, 1,, 1,, 1, 1, 1, 1 1 1 At ~68 o F and ~29% Relative humidity Stainless Silver Coating 4 8 12 16 2 24 HOURS CuVerro s performance on methicillin-resistant Staphylococcus aureus (MRSA) compared with the ubiquitous stainless steel and a popular silver coating. The tests were conducted at a typical room condition using Good Laboratory Practices. Greater than 99.9% of the MRSA are killed on CuVerro surfaces within two hours. But, even after 24 hours, nearly 1 million Colony Forming Units (CFU s) of MRSA are still alive on the silver-coated surfaces. 3

Same style, same durable quality now with CuVerro Antimicrobial Copper Surfaces The Arrow Hart line of devices featuring CuVerro Antimicrobial Copper Surfaces, offer specification grade decorator switches and wallplates in multiple gangs and configurations Switch with CuVerro antimicrobial touch surface Touch surfaces constructed of EPA registered CuVerro Antimicrobial Copper Surfaces should be cleaned to regular protocols When cleaned regularly, delivers continuous and ongoing antibacterial* action, remaining effective in killing greater than 99.9% of bacteria* within 2 hours Wallplate with CuVerro Antimicrobial Copper Surface Unlike coatings, CuVerro surfaces are wear resistant and the durable antibacterial* properties will remain effective for as long as the product remains in place and is used as directed Durable enough for hospital grade cleaners Touch surfaces constructed of EPA registered CuVerro Antimicrobial Copper Tarnish resistant with minimal color change over time *See footnote on back cover. 4

Commercial Grade AC Switches 15A, 12/277 V/AC 2A, 12/277 V/AC Single-Pole, Double-Pole, 3-Way, 4-Way Commercial Grade Decorator Switches with Surfaces Features Touch surfaces constructed of EPA registered** When cleaned regularly, CuVerro antimicrobial copper surface delivers continuous and ongoing antibacterial* action, remaining effective in killing greater than 99.9% of bacteria* within 2 hours CuVerro antimicrobial copper alloy helps inhibit buildup and growth of bacteria* within 2 hours of exposure between routine cleaning and sanitizing steps Tapered back wire openings handle multiple wire sizes and types for applications up to #1 AWG solid or stranded wire One-piece wrap around auto-grounding strap for ground integrity in severe conditions Welded construction provides superior assembly security under heavy use Stippled line and ground contacts ensure solid contact; ground screw clamp provides secure wiring and reduces installation time Tarnish resistant with minimal color change over time 761CUR Switches Rating A V/AC Description Color Suffix Catalog No. 15 12/277 Single-Pole Decorator Switch w/cuverro Paddle CU, CUR 761 3-Way Decorator Switch w/cuverro Paddle CU, CUR 763 4-Way Decorator Switch w/cuverro Paddle CU, CUR 764 2 12/277 Single-Pole Decorator Switch w/cuverro Paddle CU, CUR 7621 Double-Pole Decorator Switch w/cuverro Paddle CU, CUR 7622 3-Way Decorator Switch w/cuverro Paddle CU, CUR 7623 4-Way Decorator Switch w/cuverro Paddle CU, CUR 7624 761CU Color Ordering Information: For ordering devices, include Cat. No. followed by the color suffix: CU (White Bronze), CUR (Rose) CU (White Bronze) CUR (Rose) **EPA Registration Number 85353-5 (76CUR Series) and 85353-3 (76CU Series) Testing & Code Compliance: culus Listed to UL2 file no. E1874. UL verified to Federal Spec. WC-896E. Material Characteristics: Environmental: Flammability meets UL94 requirements, V2 rated. Temperature Rating: -2ºC to 6ºC (-4ºF to 14ºF) Specifications and availability are subject to change without notice. 5

Specification Grade Wallplates Standard Size Toggle, Single & Duplex Receptacle, Decorator, Blank Box-Mounted 9372CUR Specification Grade Wallplates Features Touch surfaces constructed of EPA registered** When cleaned regularly, CuVerro antimicrobial copper surface delivers continuous and ongoing antibacterial* action, remaining effective in killing greater than 99.9% of bacteria* within 2 hours CuVerro antimicrobial copper alloy helps inhibit buildup and growth of bacteria* within 2 hours of exposure between routine cleaning and sanitizing steps Wallplates Stamped from.32 (.81mm) thick CuVerro Antimicrobial Copper Surfaces Superior non-corrosive and non-magnetic properties for applications needing protection from those elements Tarnish resistant with minimal color change over time 9341CU 9311CUR 9343CU Configuration Description Color Suffix Catalog No. 1-Gang Toggle Wallplate w/cuverro CU, CUR 9371 2-Gang Toggle Wallplate w/cuverro CU, CUR 9372 3-Gang Toggle Wallplate w/cuverro CU, CUR 9373 4-Gang Toggle Wallplate w/cuverro CU, CUR 9374 1-Gang Single Receptacle Wallplate w/cuverro CU, CUR 9391 1-Gang Duplex Receptacle Wallplate w/cuverro CU, CUR 9311 2-Gang Duplex Receptacle Wallplate w/cuverro CU, CUR 9312 3-Gang Duplex Receptacle Wallplate w/cuverro CU, CUR 9313 1-Gang Decorator Wallplate w/cuverro CU, CUR 9341 2-Gang Decorator Wallplate w/cuverro CU, CUR 9342 3-Gang Decorator Wallplate w/cuverro CU, CUR 9343 4-Gang Decorator Wallplate w/cuverro CU, CUR 9344 1-Gang Blank Box-Mounted Wallplate w/cuverro CU, CUR 93151 2-Gang Blank Box-Mounted Wallplate w/cuverro CU, CUR 93152 3-Gang Blank Box-Mounted Wallplate w/cuverro CU, CUR 93153 4-Gang Blank Box-Mounted Wallplate w/cuverro CU, CUR 93154 Color Ordering Information: For ordering devices, include Cat. No. followed by the color suffix: CU (White Bronze), CUR (Rose) CU (White Bronze) CUR (Rose) *See footnote on back cover. **EPA Registration Number 85353-5 (76CUR Series) and 85353-3 (76CU Series) Testing & Code Compliance: UL Listed to UL 514D file no. E923 Material Characteristics: Temperature Rating: -4ºC to 7ºC (-4ºF to 158ºF) Specifications and availability are subject to change without notice. 6

Switches & Wallplates made with CuVerro Antimicrobial Copper Surfaces 15A, 12/277 V/AC 2A, 12/277 V/AC Single-Pole, Double-Pole, 3-Way, 4-Way Specifications Switch Type Wiring Type Testing & Code Compliance Specifications Environmental Electrical Mechanical Materials Flammability Temperature Rating Commercial Grade 15A & 2A, 12/277V, Decorator Switches made with CuVerro Antimicrobial Copper 76CU (CUR) Series Back & Side Wire culus Listed to UL2, File no. E1874 UL Verified to Federal Spec. WC-896E EPA Registration Number 85353-5 (76CUR series) and 85353-3 (76CU series) Meets UL 94 requirements; V2 rated -2ºC to 6ºC (-4ºF to 14ºF) Dielectric Voltage Withstands 15V per UL 2 Current Interrupting Temperature Rise Terminal Accommodation Voltage Ratings Horsepower Ratings Paddle Housing Paddle Insert Top Housing Bottom Housing Strap Auto Ground Clip Terminals Terminal Screws Yes, at full-rated current Max. 3ºC (86ºF) after 1 cycles of overload and 3, cycles of endurance testing #14-1 AWG Permanently marked on device Rated for motor loads per UL 2: 15A: @12V/AC = 1/2 HP, @24V/AC = 2 HP; Max. amps 12A 2A: @12V/AC = 1 HP, @24V/AC = 2 HP; Max. amps 16A Polycarbonate Polycarbonate PVC.5" thick steel, 15A = zinc plated; 2A = brass plated Phosphor bronze.35" thick brass #8-32 steel with #1 head, brass plated; neutral screw nickel plated Wallplate Type Manufacturing Process Testing & Code Compliance Specifications Materials Environment Temperature Rating Wallplate Mounting Screws Specification Grade Standard Size Wallplates made with CuVerro Antimicrobial Copper 9CU (CUR) Series Stamped UL Listed to UL 514D, file no. E923 EPA Registration Number 85353-5 (9CUR series) and 85353-3 (9CU series) -4ºC to 7ºC (-4ºF to 158ºF).4" thick CuVerro Antimicrobial Copper Alloy, 99.5% containing copper, nickel, iron, manganese, zinc, and.5% lead Stainless Steel Ground Screw Backwire Clamp Contacts Moveable Contact Arm Pressure Plate #8-32 steel, brass plated, green Steel, brass plated Silver alloy Brass Brass 7

Footnote *Laboratory testing shows that, when cleaned regularly, CuVerro antimicrobial copper surfaces kill greater than 99.9% of the following bacteria within 2 hours of exposure: MRSA, Staphylococcus aureus, Enterobacter aerogenes, Pseudomonas aeruginosa, and E. coli O157:H7. CuVerro antimicrobial copper surfaces are a supplement to and not a substitute for standard infection control practices and have been shown to reduce microbial contamination, but do not necessarily prevent cross contamination; users must continue to follow all current infection control practices, including those practices related to cleaning and disinfection of environmental surfaces.cuverro is a registered trademark of GBC Metals, LLC and is used with permission, CW-13-127. Download a 2D barcode reader application to your smart phone to visit us online: Cooper Wiring Devices United States 23 Cooper Circle Peachtree City, GA 3269 P: 866-853-4293 F: 8-329-355 Canada 5925 McLaughlin Road Mississauga, Ontario, L5R 1B8 P: 8-267-142 F: 8-761-5748 www.arrowhart.com/cuverro www.cuverro.com www.antimicrobialcopper.com email: custserv@cooperwiringdevices.com cwdmarketing@cooperindustries.com Mexico Carr. Tlalnepantla Cuautitlan Km 17.8 s/n Col. Villa Jardin esq. Cerrada 8 de Mayo Cuautitlan, Mexico CP 548 P: +52555899919 F: +52552627116 Your Authorized Cooper Wiring Devices Distributor is: Cooper Wiring Devices is a valuable trademark of Cooper Industries in the U.S. and other countries. You are not permitted to use the Cooper Trademarks without the prior written consent of Cooper Industries. 212 Cooper Industries, plc. For more information on Antimicrobial Copper visit: www.antimicrobialcopper.com Cooper US, Inc. 6 Travis, Ste. 56 Houston, TX 772-11 P: 713-29-84 www.cooperindustries.com 225-7-12