1712 8th Street Drive SE Hickory, NC 28601 (828) 322-2700 www.shur.com TENSILE ADHESION THICKNESS ELONGATION AF 075 3 mil dead-soft aluminum foil, Used in broad temp. ranges to create vapor 30 55 4.8 5.3 linerless, acrylic barriers, waterproof seals; masking when electroplating and painting. L-T-80B and SAE-AMS-T-23397 tested. AF 100 2 mil aluminum foil, linered, UL 181A- For joining and sealing fiberglass duct board 25 64 4.2 2 P/B-FX listed joints and seams; joining and sealing flexible air duct seams and connections for air-tight seal. UL-181A-P listed; UL181B-FX listed. AF 912 1.5 mil dead-soft aluminum foil; To seal and join aluminum backed duct 11 120 3.6 2 linered; tested in accordance with UL wrap, to create water and vapor barriers, 723 and for temporary metal repair. AF 914CT Cold Temperature acrylic ; To seal and join aluminum backed or fibrous 18 73 3.2 2 1.5 mil dead-soft aluminum foil; insulation and metal ductwork, to create Linered; Tested in accordance with water and vapor barriers, and for use in UL 723 metal repair. Adhesive formulated for use in vast temperature ranges and weather conditions. AF 973 2 mil dead-soft aluminum foil; linered; To seal and join aluminum backed duct 17 113 4.1 3 tested in accordance with UL 723 wrap, to create water and vapor barriers, and for temporary metal repair. AF 975CT Cold Temperature acrylic ; 2 To seal and join aluminum backed or fibrous 25 61 4 6 mil dead-soft aluminum foil; Linered; insulation and metal ductwork, to create Tested in accordance with UL 723 water and vapor barriers, and for use in metal repair. Adhesive formulated for use in vast temperature ranges and weather conditions. AF 982 FSK, linered, tested in accordance All weather, maximum strength for 39 60 6.8 1 with UL 723 sealing/seaming FSK duct wrap. AF 984CT Cold Temperature acrylic ; To seal, seam, and join scrim reinforced 42 60 7.4 2 FSK; Linered; Tested in accordance pipe and duct insulation, and to create a with UL 723 water and vapor barrier. Adhesive formulated for use in vast temperature ranges and weather conditions. AF 990CT ASJ, linered, tested in accordance Used in cold and dual temp. systems to 22 82 3.7 100 with UL 723 seal, seam, and join scrim reinforced pipe and duct insulation. AP 015 1.6 mil, label protection grade, 25 Protection for shipping labels and other 20 19 1.6 150 micron cast BOPP film, emulsion printed surfaces against damage from acrylic weather and rough handling; high clarity, non-yellowing and UV resistant. AP 101 1.6 mil, general purpose grade, 25 Light duty packaging in low or high 20 18 1.6 150 micron cast BOPP film, emulsion temperature extremes; non-critical closure of acrylic lightweight cartons in low stress handling and shipping environments; UV resistant. AP 180 1.8 mils, Production grade, 25 micron For automated and manual sealing of light to 20 21 1.8 150 cast BOPP film, Emulsion acrylic medium weight cartons in extreme temperature environments. High clarity and UV resistant. Directly printable surface. AP 201 2.0 mil, production grade, 28 micron Medium duty applications in low or high 24 22 2.0 150 cast BOPP film, emulsion acrylic temperature extremes and normal handling conditions; color coding; UV resistant. 2012 PSTC Tape Products Directory 119
(cont.) AP 301 2.2 mil High Performance grade, 35 For automated and manual sealing of 27 25 2.2 150 micron cast BOPP film, Emulsion medium sized cartons in low or high acrylic temperatures and subjected to shipping and handling stress; UV resistant. AP 401 2.5 mil, Heavy Duty Grade, 40 Heavy duty manual and automated carton 30 27 2.5 150 micron cast BOPP film, Emulsion sealing under rough handling and load acrylic stress; critical closure of bulky packages in extreme temperature storage conditions; UV resistant. CF 30 Premium paint masking, fine Masking of primed and painted sheetrock, 23 34 7.1 10 structured crepe paper backing, clean wallboard, woodwork, ceramic tile and removal, residue free knockdowns. CF 740 Fine structured crepe, very high Designed for today's high tech transportation 24 31 6.5 10 temperature resistant, med-high industry (auto, coaches, buses); metal adhesion, rubber based preparation, painting and coating; fiberglass system gel coat; medium temperature powder coating; EPDM, rubber insulation protection; no residue. COL 00 Premium grade, High Adhesion, For industrial and automotive paint 22 35 6.4 8.5 Rubber-based applications that do not require the use of a bake oven. Conformability, easy unwind, high tensile strength, and flexible backing. CP 27 14-day ShurRELEASE, Clean 14-day UV resistant indoor/outdoor paint 24 19 5.7 6 removal, UV resistant, Low Adhesion, masking; ideal for surfaces such as Blue crepe backing, Acrylic woodwork, glass, aluminum, steel, titanium and vinyl. CP 28 30-day ShurRELEASE, Clean Masking for drywall, wallpaper and other 25 8 4.7 5 removal, UV resistant, Delicate delicate surfaces; painting and general Surface, Acrylic purpose applications for which a low tack, high performance is needed when applied to clean, smooth surfaces free of oil and dirt; masking for faux finishing. CP 44 Specialty grade, bandoliering for Axial lead; sequencing applications. 32 55 7.5 9 axial lead and sequencing applications CP 60 60-Day ShurRELEASE, Delicate 60-day clean removal for use on delicate 23 15 3.7 4 Surface, Acrylic-based surfaces, to create striping effect, creative designs and sharpest edges. CP 64 Premium grade, printable colored For use on smooth substrates in applications 23 40 6.4 9 paper, high adhesion, rubber-based such as packaging, bundling, holding,. splicing, labeling, color coding, decorating and identification. Printable product is resistant to water and oil. CP 66 Contractor grade, easy unwind, For commercial and residential painting and 21 41 5.7 8 natural crepe, high adhesion, rubber- construction, industrial masking, holding and based packaging. Good for applications where conformity to irregularly-shaped surfaces and good quick stick are required. CP 83 Utility grade, flexible, water and oil Use in general purpose packaging, bundling, 20 46 5.3 8 resistant, natural crepe, very high holding, splicing, tabbing and banding adhesion, rubber-based applications; water and oil resistant; not recommended for exacting industrial masking, spray painting or oven baking applications. 120 2012 PSTC Tape Products Directory
(cont.) CP 99 Premium grade, natural crepe, high Masking of wood and metal; general 22 35 6.4 8.5 adhesion, rubber-based, purpose and painting uses with no primer clean removal in hot or cold flake-off or paint build-up; strips cleanly hot environments or cold. CP 101 General purpose grade, med-high General purpose packaging, bundling, 19 34 4.9 8 adhesion, blended rubber-based holding, splicing, masking and labeling for home, school and industry. CP 102 Industrial grade, med-high adhesion, Non-critical construction and painting. Used 19 31 5.5 8 rubber-based for general purpose packaging, bundling, holding, splicing and tabbing.removal from most surfaces if removed within 24 hours. CP 106 General purpose grade, high General purpose packaging, bundling, 18 40 4.7 8 adhesion, rubber solvent-less rubber holding, splicing, masking and labeling for home, school and industry. CP 107 Industrial grade, med-high adhesion, Industrial, commercial and residential paint 20 30 5 8 rubber solvent-less rubber-based masking; for use on metal, vinyl, glass, plastic and rubber. Clean removal from most surfaces if removed within 24 hours CP 150 Painter's Mate green masking For use on glass, metal, wood, walls, trim, 17 24 5.7 11 baseboards and window frames. Safe to use with all paints, as well as most lacquers and varnishes. CP 400 High Performance grade - Masking of marine craft, metal fabrication, 20 30 6 10 temperature resistant autos, coaches, buses. CP 450 High performance grade heavy Masking of marine craft, metal fabrication, 31 34 6.7 10 duty/temperature resistant autos, coaches, buses. CP 500 Med-high adhesion, high For high tech transportation industry on 27 36 6.5 10 temperature, performance masking auto, coaches and buses; metal preparation, painting and coating. CP 632 General purpose grade, colored General purpose packaging, bundling, 22 30 5.4 8 crepe masking, med-high adhesion, holding, binding, splicing, labeling, color rubber-based. coding, banding, decorating, identification of various substrates. CP 650 High performance grade heavy Masking of marine craft, metal fabrication, 30 34 6.6 10 duty/high temperature autos, coaches, buses in high temperatures. CP 743 Photographic black masking ; For use in photo studios, film processing 21 47 6.1 7 very high adhesion; rubber-based laboratories, as well as in home dark rooms. CT 109 Transparent, hand-tearable, bio- Extra security sealing, packaging, mending; 22 58 1.7 10 degradable, cellulose film, high tack adheres to hard-to-stick surfaces; high tensile strength makes it excellent for splicing. DC 181 3 mil printed OPP, acrylic, Designed for use on Class 1 flex duct for 30 44 2.7 125 UL181B-FX listed connecting, joining, sealing and patching flexible air ductwork. UL 181B-FX listed. DF 63 General purpose, double-faced, crepe Mounting, holding, splicing, tabbing and 23 35 6.5 9 paper, rubber-based, fastening of various substrates. white siliconized crepe paper liner DF 65 General purpose, double-faced, flat Mounting, holding, splicing, tabbing and 27 66 5 2.5 paper, aggressive rubber-based fastening of various substrates., white siliconized flat paper liner DF 191 Painter's Mate double-sided dropcloth Holds plastic dropcloth in place while 18 30 6 11 painting ceilings, walls, etc. 2012 PSTC Tape Products Directory 121
(cont.) DF 545 13.5 mil double-faced cloth, For adhesion to concrete, tile, hardwood 25 45 13.5 9 industrial grade, residue free flooring, irregular surfaces in construction, convention and abatement applications. DF 642 12 mil double-faced cloth, Industrial holding, mounting, splicing, carpet 32 40 12 8 industrial grade, aggressive synthetic installation. rubber DP 050 General purpose; double-faced film Splicing of corrugated board and other paper 7.5 65 3.75 100 ; solvent-based acrylic substrates that require high sheer. DP 391 Double-coated specialty ; solvent Mounting, bonding and fastening 22 82 3.7 100 synthetic rubber applications on a wide variety of substrates including Low Surface Energy plastics and coatings; non-direct UV exposure applications where clean removal is required; designed for mounting indoor window kits. DT 200 Double-faced, non-woven tissue ; Splicing of corrugated board, paper, plastics 5 60 4.5 3.5 solvent-based acrylic and other continuous web processes that require high sheer. EV 057BLK SPVC film, UL listed electrical Splicing, insulating and binding wiring 14 16 7 200 harnesses. EV 057CLR SPVC film, UL Listed colored Splicing, insulating and binding wiring 12.6 13 6.8 380 electrical harnesses. FC 100 1/32 Polyethylene Cohesive Foam Protecting exposed metal, wood & edges of 10.3 2 34 70.6 items during shipment. Containing small items during shipping process. FC 200 1/16 Polyethylene Cohesive Foam Protecting exposed metal, wood & edges of 7.4 0.88 40 64.8 items during shipment. Containing small items during shipping process. FP 17 Premium grade, printable, high Packaging, bundling, holding, binding, 29 45 5.5 3 adhesion, rubber-based splicing, labeling, color coding, banding, decorating and identification on various substrates. FP 96 General purpose grade, extensible For hand and machine carton sealing, 37 88 5.9 6 kraft flat paper, high tack, rubber splicing, binding, tabbing, reinforcing, based, packaging and banding and patching of various substrates. splicing FP 97 Packaging grade, extensible kraft Hand and machine carton sealing; splicing 35 80 6 5 flatback paper, high tack, solventless of various substrates; packaging, binding, rubber-based holding, tabbing, re-enforcing, banding and patching for a variety of substrates. FP 152 Painter's Mate delicate surface Professional paint on faux finishes, striping, 21 15 4.3 3 most wall coverings and freshly cured paint. FP 202 Premium grade, heavy duty bleached Splicing, hand and machine carton sealing; 50 60 7.2 3 flat paper, high tack, rubber-based general purpose use when a premium, packaging and splicing with excellent properties is needed. FP 227 Performance grade, printable colored For use in packaging, bundling, holding, 30 48 5.9 3 flatback paper, very high adhesion, binding, splicing, labeling, color coding, rubber-based banding, decorating and identification on various substrates. FP 726 Ultimate premium grade - printable, Package sealing, color coding, labeling. 45 65 6.4 3 rope paper, multiple colors 122 2012 PSTC Tape Products Directory
(cont.) FrogTape Professional Painter's Tape Ideal for use on trim, cured painted walls, 22 23 5.3 11 woodwork, glass and vinyl. Exclusive PaintBlock Technology seals edge for a perfect finish. GG 200 Golf grip, double-faced paper Factory and clubhouse golf grip installation; 23 48 6.5 9, rubber-based differential mounting, holding, splicing, tabbing,, siliconized crepe paper fastening of various substrates including liner graphite, steel and titanium. GS 490 100 lbs/in tensile, general purpose, Light duty strapping, packaging, bundling, 100 70 4.5 3.7 cast polypropylene film, fiberglass unitizing and palletizing. reinforced, synthetic rubber/resin hot melt GS 500 150 lbs/in tensile, utility grade, cast Non-critical strapping, packaging, bundling 150 70 5 3.7 polypropylene film, fiberglass and palletizing. reinforced, synthetic rubber/resin hot melt GS 501 175 lbs/in tensile, industrial grade, Medium duty strapping, packaging, bundling, 175 70 5.4 3.7 cast polypropylene film, fiberglass palletizing. reinforced, synthetic rubber/resin hot melt GS 521 300 lbs/in tensile, high performance Heavy duty closing, strapping, packaging, 300 70 6.3 4 grade, cast polypropylene film, bundling, unitizing, palletizing and L-Clip fiberglass reinforced, synthetic applications. rubber/resin hot melt GS 531 300 lbs/in tensile, premium grade, Maximum security; for heavy duty closing, 300 70 6.5 4 cast polyester film (PET), fiberglass strapping, packaging, protecting, bundling, reinforced, synthetic rubber/resin hot re-enforcing, sealing, unitizing, palletizing melt and "L" clipping. HP 100 1.6 mil general purpose grade, 25 Light duty packaging applications. Sealing of 21 42 1.6 150 micron cast BOPP film, synthetic lightweight cartons with minimal exposure to rubber/resin hot melt handling, shipping and load stress. Wide range of applications on various substrates include bundling, repairing cartons, paper and film bags. HP 200 1.9 mil production grade, 30 micron Reliable performance in manual or 27 44 1.9 150 cast BOPP film, aggressive synthetic automated closure of medium weight cartons rubber/resin hot melt in normal manufacturing and shipping environments; miscellaneous packaging, holding and repair applications. HP 232 1.9 mil production grade, cold For manual or automatic case sealing; 27 30 1.9 150 temperature performance, 30 micron recommended for packaging applications in cast BOPP, synthetic rubber/resin hot cold temperature environments such as food melt formulated for use in processing and packaging facilities; cold cold temperature applications weather moving/storage and unheated warehouses. HP 240 Production grade, 30 micron cast For manual or automatic medium weight 27 44 1.9 150 BOPP film, printed messages case sealing when a printed message is desired. HP 260 1.9 mil Production grade, Directly For use on Siat L33, L36, L233 (or 27 44 1.9 150 Printable BOPP Packaging Tape equivalent) printing presses HP 300 2.2 mil performance grade, 35 micron Ideal for automated carton sealing 30 47 2.2 150 cast BOPP film, synthetic rubber/ applications; sealing of medium weight resin hot melt cartons subjected to increased handling stress; power for excellent quick stick and holding power to fiberboard. 2012 PSTC Tape Products Directory 123
(cont.) HP 400 2.5 mil high performance grade, 40 Recommended for large, bulky or heavy 33 54 2.5 150 micron cast BOPP film, synthetic content cartons; manual or automated rubber/resin hot melt applications in moderate to severe handling environments; also recommended for higher speed, critical closure applications. HP 460 2.5 mil Production grade, Directly For use on Siat L33, L36, L233 (or 33 54 2.5 150 Printable BOPP Packaging Tape equivalent) printing presses HP 500 3.0 mil heavy duty grade, 50 micron Extremely tough construction for the most 42 58 3 150 cast BOPP film, synthetic rubber/ demanding manual and automated resin hot melt packaging applications; excellent quick grab with holding power for heavy, bulky, carton sealing in high stress handling conditions. HP 560 3 mil Production grade, Directly For use on Siat L33, L36, L233 (or 42 58 3 150 Printable BOPP Packaging Tape equivalent) printing presses HP 800 3.4 mil heavy duty grade 50 micron Extremely tough packaging used for 54 95 3.4 130 polyester film heavy duty carton bottom seals; packing military supplies, high value electronic components, as well as sealing hazardous materials and chemicals. IT 100 Foam condensation inhibiting pipe Designed for covering cold pipes to prevent 6 N/A 118.1 126 wrap, non-contaminating condensation dripping, or covering hot pipes siliconized release liner to reduce heat loss. Aggressive adheres firmly to all metals. JLAR Clear-to-the-core, acrylic packaging Over-lamination, label protection, light carton 24 30 2.6 140 closure paper repair/mending and holding applications. Ideal for use with counter and desk dispenser units. LS 300 3 mil printed OPP, acrylic For taping HVAC line sets and UV resistant 32 46 2.6 154 outdoor applications. MJ 100 Open-weave fiberglass mesh Designed to reinforce joints, seams and 75.5 8 9 3.83 connections when used with mastic in HVAC applications; provides strength and reinforcement to all seals. P- 68 Premium grade vinyl-coated cloth Color coding; book binding; gaffer's 60 57 13.5 3 applications. P- 69 Premium grade polyethylene-coated Waterproof sealing of containers and 43 134 12 3 cloth duct ductwork; protection, splicing, bundling, seaming and sealing; use when high tensile, easy tear and conformability are necessary. P- 665 Vinyl-coated gaffer's Gaffer's ; holding wiring, lighting and 48 80 11.5 5 props; color coding. P- 628 UV resistant gaffers for color coded Gaffer's in A/V, TV, photography and 45 60 10.5 5 seaming, bundling & protection motion picture industries to hold wiring, lighting, stage props and to color code; masking silk screen frames; packaging. P- 670 Premium grade polyethylene-coated For protection, splicing, bundling, seaming, 32 100 11 3 cloth duct, waterproof, HVAC duct work sealing and when a higher Rocketdyne RB0195-002 tested tensile and easy tear are required. P- 672 Industrial grade vinyl-coated cloth Waterproof sealing of containers; temporary 60 60 12 3, waterproof, high tensile protection from welding spatter; holding, strength, ASME NQA-1 tested bundling and temporary repair. P- 691 Premium grade vinyl-coated cloth Sealing containers and rooms; abrasion 60 60 14 3, waterproof, matte finish, ASME protection; holding and bundling. NQA-1 tested 124 2012 PSTC Tape Products Directory
(cont.) PC 21F Specialty grade flame retardant cloth Aircraft industry to seam, seal and repair 28 36 13 20 duct, F.A.R. 25.853 tested interior compartment liners, cover pins/rivets; HVAC to meet bldg. codes; automotive and OEM. Meets F.A.R. 25.853. PC 460 Economy grade, cloth duct, General purpose packaging, sealing, 20 46 6 14 Tested in accordance with UL 723 seaming, holding and waterproofing. PC 590 7 mil economy grade cloth duct, Packaging, bundling, sealing, seaming, 20 56 7 20 coextruded, waterproof backing, repairing, holding, waterproofing; plumbing natural rubber and asbestos abatement industries; other non-critical, general purpose applications. PC 595 8 mil economy grade cloth duct, Excellent for non-critical, general purpose 20 55 8 20 coextruded, waterproof backing, packaging, bundling, sealing, seaming, natural rubber repairing and holding. PC 600 9 mil general purpose cloth duct, To package, patch, seal, hold, color code, 22 50 9 16 wide variety of colors, polycoated, splice, seam, protect, bundle; HVAC, high tack, easy tear plumbing, carpet and asbestos abatement applications. PC 609 10 mil industrial grade cloth duct Sheet metal and flex duct; thermal 22 68 10 16, polycoated, aggressive wet-stick insulation; as a bottom board in mfg. gray ; tested in accordance homes; asbestos abatement applications; to with UL 723 package, bundle, hold, wrap and as a general industrial. PC 610 Industrial grade; polyethylene/cotton Holding poly-sheeting in the asbestos/mold 21 50 10 18 cloth; abatement remediation industry. PC 618 10 mil light industrial grade cloth duct Used in the HVAC, industrial, commercial, 27 55 10 17, wide variety of colors utility, trucking and automotive industries for holding, securing, seaming, repairing bundling, splicing, packaging, masking and as a moisture barrier. PC 619 9 mil light industrial grade cloth duct Used in the hospitality, motion picture & A/V, 22 50 9 16, fluorescent colors motorsports and floral industries for book binding, color coding, marking, sealing, seaming and bundling. PC 620 11 mil industrial grade cloth duct HVAC, industrial, commercial, utilities, 25 43 11 12 ; tested in accordance with UL trucking, automotive; to hold, protect, seam, 723 repair, bundle, splice, package, mask, secure; as a moisture barrier; excellent adhesion to metal. PC 621 11.5 mil Contractor grade cloth duct Holding, seaming and sealing HVAC sheet 27 50 11.5 12 metal and flex ducts, exhaust vents and preformed insulation; industrial holding, splicing, protecting and packaging. PC 622 12.5 mil Premium grade cloth duct Motorsports; silk screening; plastering; 34 54 12.5 14 stucco masking; HVAC duct systems; bundling, seaming, sealing and splicing. PC 623 Economy grade nuclear cloth duct Construction and maintenance of nuclear 28 50 11.5 12, ASME NQA-1 tested power plants where vapor barriers are essential, conforms and adheres to most surfaces and minimum ppm's of halogens and sulfides are required; holding labels or signs on stainless steel pipes, color coding and sealing end caps on stainless steel pipes. 2012 PSTC Tape Products Directory 125
(cont.) PC 624 Premium grade nuclear cloth duct Nuclear power plants to seal end caps on 36 56 13 14, ASME NQA-1 tested stainless steel pipes; hold labels, signs on stainless steel pipes; seal HVAC metal duct work. PC 625 Premium grade lusterless cloth duct Premium waterproof packaging meeting 40 50 12.5 16, ASTM-5486 tested, High government specifications; masking silk holding power screen frames; to moisture proof cartons, canisters and tubing. PC 626 Specialty retail grade ACU digital Sealing, waterproofing, holding, 22 40 10 29 camouflage pattern duct camouflaging, sound deadening, covering reflective surfaces, patching applications. PC 629 Contractor grade; polyethylene/cloth Holding poly-sheeting in the asbestos/mold 27 65 10.5 15 duct remediation industry. PC 657 14.5 mil premium grade co-extruded Manufactured housing to seam bottom 29 96 14 11 cloth duct, excellent adhesion boards; sealing HVAC ducts; metal peening; and tack characteristics motorsports 200 mph duct. PC 658 17 mil super bottom board, Seaming and sealing bottom board materials 30 113 17 10 superior adhesion and holding power, used in the mobile home/ manufactured tested in accordance with UL 723 housing industry; repairing of bottom board holes during setup and construction; protection of metal parts or surfaces in metal/plastic peening operations. PC 660 Fluorescent vinyl-coated gaffer's Gaffer's ; holding wiring, lighting and 46 50 12 5 props; color coding. PC 667 Specialty grade UV resistant cloth Excellent protective masking of non-painted 22 50 9 15 duct and painted surfaces of various materials such as steel, vinyl, aluminum and anodized metals. Used in plastering, concrete and stucco industry where UV resistance is required. PC 668 Specialty/premium-outdoor UV For two- and three-step (scratch, brown and 27 55 11 15 exposure cloth duct finish) stucco applications where barrier is needed the entire application. PC 721 Select grade, high tensile, high tack, HVAC applications; sealing and seaming 32 55 11.5 24 natural rubber, cloth duct and holding sheet metal duct work; industrial applications; holding, bundling, splicing, seaming, sealing, protective packaging; asbestos abatement. PC 745 17 mil ferociously strong Application to rough surfaces, for heavy 47 110 17 10 repairs, bottom board and manufacturing housing. PC 857 14 mil specialty grade cloth duct For HVAC Class 1 flex duct applications, 27 70 13.5 12, UL 181B-FX listed, engineered installing air ducts and air connectors and for Class 1 flex duct systems making connections and splices trouble-free and professionally-done; used when requirements of UL, flex duct manufacturers and city and state building codes are imposed. PC 858CA 14 mil California Energy Commission For HVAC Class 1 flex duct applications; 27 70 13.5 12 (CEC) Approved specialty grade cloth installing air ducts and air connectors and duct making connections and splices; conforms to the 2005 and 2008 California Building Energy Efficiency Standard Section 124(b) 1D, 124(b) 2D, 150(m) 3D. 126 2012 PSTC Tape Products Directory
(cont.) PE 444 7 mil UV resistant polyethylene film For masking surfaces during stucco 19 80 7 76, outdoor UV stucco masking, applications and painting; watertight seal; clean removal residue free removal. PE 555 9 mil UV resistant polyethylene film Multi-purpose surface protection, color 27 92 9 94, waterproof, excellent tear coding, splicing, seaming on pipe fitting characteristics covers. PF 220 2.4 mil Protective Film Tape, 30 Seals spiral and rectangular galvanized 7.8 14 2.4 1200 micron polyethylene film, emulsion ductwork for clean room installations, duct acrylic storage and transportation; protects ducts from contaminants and contamination occurring from dust, dirt, moisture and insects. For hand use applications. PP 802 2.0 mil, Premium Plus grade, 25 Use with hand or machine dispenser to seal/ 20 25 2 140 micron cast BOPP film, High tack, repair/bundle corrugated cartons, paper or Solvent-based acrylic film containers in wide temperature range. PP 803 2.2 mil premium plus grade, ultra Overlamination, label protection and carton 25 25 2.2 150 clear, 30 micron cast BOPP film, high closure with 100% clarity in a wide tack, solvent-based acrylic temperature range. Identified by "ULTRA CLEAR." PP 807 1.8 mil label protection grade, 25 Moisture-proof label protection ; 20 23 1.8 140 micron cast BOPP film, solvent-based industrial and production laminating, joining, acrylic protecting, covering; resists bacteria, fungi, solvents, weathering and yellowing. PP 808 Bag sealing, UPVC film, high tack, Moisture-resistant for light weight bag 27 24 2.1 60 natural rubber sealing, banding, bundling, packaging; will hold in sub-freezing temperatures. PP 810 Premium grade, 25 micron cast Light to medium carton sealing applications 22 22 1.8 140 BOPP film backing, high tack, in a wide range of temperatures and normal solvent-based acrylic shipping and handling environments usable with hand dispensers. PP 815 Heavy duty grade, 40 micron cast Critical sealing/repairing of corrugated 26 28 2.6 140 BOPP film, solvent-based acrylic containers in hot or cold environments; usable with hand dispenser. PS 748 2.8 mil utility grade, tensilized Light duty strapping, packaging, bundling, 100 34 2.8 30 polypropylene film, water-based palletizing. acrylic adhesion PS 750 4.7 mil heavy duty grade, tensilized Heavy duty strapping, packaging, bundling, 145 35 4.7 35 polypropylene film, water-based palletizing. acrylic adhesion PW 100 Corrosion protection pipewrap Corrosion protection for metal and plastic 32 20 9 200 pipe; for use on underground installations. SF 682 ShurFLEX Contractor grade For the HVAC industry to seam, connect, 25 45 10 18 metalized cloth duct, Natural splice, patch and seal sheet metal and flex rubber duct, rigid duct boards, air vents, insulation, fibrous filter banks and polluction collection systems; waterproof packaging. SF 683 ShurFLEX Contractor grade Designed for use in the HVAC industry to 25 45 10 18 metalized cloth duct with print, seam, connect, splice, patch and seal sheet Natural rubber metal and flex duct, insulation, rigid duct boards, air vents and fiber board. SF 685 ShurMASTIC indoor/outdoor mastic Paintable duct sealer on a roll. Used in the 955 200 17 560 on a roll, Paintable foil HVAC industry in lieu of mastic and wrap. SF 686 ShurMASTIC indoor/outdoor mastic Sealing flexible and rigid air ducts. 1400 100 17 0 on a roll, Paintable foil 2012 PSTC Tape Products Directory 127
(cont.) TA 450 General purpose, transfer Mounting, holding, joining and splicing N/A 25 1.6 N/A, permanent dry unsupported, paper, cardboard, textiles, plastics, leather, siliconized release liner wood, glass and painted surfaces in normal and severe environmental conditions and extreme temps; resists humidity, most solvents and UV light. TG 356 General purpose, transfer Mounting and holding various substrates; N/A 20 2 N/A, permanent dry, reverse wound joining/splicing paper, cardboard, textiles, on a 1" I.D. core, siliconized release plastics, leather, wood, glass and painted liner surfaces. VF 719 2 mil economy grade, printable UPVC Use with hand dispenser to seal cartons with 26 16 1.9 60 film, high tack, natural rubber recycled fiber content, heavy ink coverage or. Colors: natural, tan, white. rough surfaces; excellent choice when moisture and sub-freezing temperatures are a factor. VP 410 5.5 mil SPVC line set, UV Floor, lane and aisle marking; color coding; 13 20 5.25 200 resistant, floor, lane and aisle to wrap and insulate air ducts or marking, wide variety of colors underground pipes; to ensure moisture and humidity resistance; meets OSHA color coding requirements. VP 415 6.6 mil SPVC film, floor, lane and Warning stripe for lane marking, color 15 12 6.6 200 aisle marking coding, sealing, bundling, identification of safety and caution areas; to wrap and insulate air ducts, underground pipes; resistant to acids, alkalides, oils, moisture, humidity, corrosion. VP 500 Embossed white vinyl Seaming and patching white vinyl faced 10 40 4.3 70 insulation. 128 2012 PSTC Tape Products Directory