Poster Session 1. Room: 4F, Building B

Similar documents
Oral Presentation Session

National Pingtung University of Science and Technology

Wind Energy And Wind Power Technology (2) By ZHANG ZHI YING?ZHAO PING?LI YIN FENG DENG

Wind Energy And Wind Power Technology (2) By ZHANG ZHI YING?ZHAO PING?LI YIN FENG DENG

6 B-P B-P B-P C-P C-P C-P C-P C-P B-P C-P C-P C-P-08 Yung-Lan Yeh

International Conference on Traffic Engineering and Transportation System (ICTETS 2017)

Mitigative Capacities of Plant Disposition Types and Space Types on. Urban Heat Island Effect. LU & Bo WANG b

Yao Xin Sheng. Position:Distinguished Professor(Academician) Faculty:State Key Laboratory Quality Research in. Chinese medicine

COUNTRY SECTION. Taiwan Fishery products. Validity date from 17/04/2018 Date of publication 04/04/2018. List in force

Note Flexible Four-in-one Micro Sensor for Reliability and 100-hour Durability Testing

Research of Load Leveling Strategy for Electric Arc Furnace in Iron and Steel Enterprises Yuanchao Wang1, a*, Zongxi Xie2, b and Zhihan Yang1, c

Construction Engineering Construction Management By LI FENG QIANG ZHU BIAN GUO DAO SHENG

The Effects of Sapphire Substrates Processes to the LED Efficiency

Study on Current Protection in Distribution Network with Distributed Generation

A Smart Fan System for Temperature Control in Plant Factory

Problems Existing in Measurement of Liquid Flash Point and Upswing Measures of Experiment Process QI Li-ming 1, a, ZHAO Rong 2, b, GE Xu-bin 3, c

Light enhancement by the formation of an Al-oxide honeycomb nano-structure on the n-gan surface of thin-gan light-emitting diodes

The Benefits Analysis of Environmental Management Investment in Taiwan s Industries

The Ninth Japan-Korea-Taiwan Joint Seminar on Earthquake Engineering for Building Structures (SEEBUS 2007) Hsinchu, Taiwan, October 26-27, 2007

Application of Internet of Things Management in Electric Power Industry

November 24. Thursday, 24th November 9:10 ~ 12:00. 3F / Room C. Opening Session. 9:10-9:30 Welcome Address. Plenary Session (I)

RESEARCH AND DEVELOPMENT OF THE INFORMATION MANAGEMENT SYSTEM OF AGRICULTURAL SCIENCE AND TECHNOLOGY TO FARMER BASED ON GIS

A study on the strength and expansion of composite cement mortar with BSSF slag

IAM2017S Program. July 5, 2017 (Wednesday) 09:00-15:00 Registration Ohgi 扇 (6F)

7 Cao Zhenping F Vice Mayor of Bozhou Municipal Government

Date Time Venue Speaker Title Moderator. Division of Mathematics and Physical Sciences. Dr. Tse-Ming Chen (Nat'l Cheng Kung Univ.)

Ultrathin Nanosheets of Feroxyhyte: A New Two-dimensional. Hefei National Laboratory for Physical Sciences at Microscale,

Research on Temperature Field and Stress Field of Prefabricate Block Electric Furnace Roof

Transient Stability Analysis of an Industrial Cogeneration System

Navigation and Control of Unmanned Aerial Vehicles in GPS Denied Environments

2nd CCPS China Conference on Process Safety 2014

Date: 24 October 2017 (Tuesday) Time: 9:30 17:20 Venue: Rm 606A, Ho Sin Hang Engineering Bldg, CUHK

Static Experiments Research on Multi-Layer Steel Plate Isolator Yan Hui 1, a, Zhang Lu 2,b, Dai Guanghao 3,c and Jiang Hongyuan 4,d

AN INVESTIGATION OF INJECTION MOLDING PARAMETERS ON A SINGLE-STAGE INJECTION STRETCH BLOW MOLDING

7th National Conference on Functional Materials and Applications 2010

The Recrystallization of Microelectronic Lead-Free Solders

SPIE NTU Student Chapter activities

EVALUATION AND PERFORMANCE OF TAIWAN HOUSING AND SCHOOLS IN THE KAOHSIUNG/MEINONG EARTHQUAKE

Changes of Clothing Distribution Logistics Management RFID Technology

Chang Gung University, Tao-Yuan, 333, Taiwan. Industrial Technology Research Institute, Hsinchu 310, Taiwan. Fax:

International Journal of Information Technology and Business Management 29 th March, Vol.35 No JITBM & ARF. All rights reserved

Process Design Optimization through Numerical Experimentation for a Brake Disc Casting

Message from the organizers

A Uniform Pressure Apparatus for Micro/Nanoimprint Lithography Equipment

ENHANCED SENSING CHARACTERISTICS IN MEMS-BASED FORMALDEHYDE GAS SENSOR

Sliding Pressure Optimization Method for Steam Turbine with Main Steam Flow Rate as Independent Variable

The Optimal Design of Beijing Bus Fares of Transit System

FABRICATION FOR MICRO PATTERNS OF NICKEL MATRIX DIAMOND COMPOSITES USING THE COMPOSITE ELECTROFORMING AND UV- LITHOGRAPHY

Performance and regression analysis of thermoelectric generator

Application of Ultra-high Performance Concrete in Lifeline Engineering

Curriculum Vitae Name Title Birth Date Gender Address Telephone Mobile Education Background Professional Experience

RESUME of TRAN BINH TINH

Using Data Mining to Increase Customer Life Time Value

Technical Layout of Harbin Engineering University UAV for the International Aerial Robotics Competition

List of Chinese Participants

Deposition of Silica Aluminum Using an Alkali Solution of Fly Ash

Research on Regional Logistics Industry Development Strategy Based on System Dynamics: Take Changzhou as a Case

A MODEL OF RETURN FLOW RECOVERY SYSTEM IN PADDY FIELD BASE ON GIS

1 Mold 4 Cavity Tube Bending Mold Design based on Moldflow

Application of Sequence Control Injection in Modified Design of Car Front Bumper

Energy Storage China 2014

Fully automatic CNC machining production system

TSV-Based Quartz Crystal Resonator Using 3D Integration and Si Packaging Technologies

Work values, work attitude and job performance of green energy industry employees in Taiwan

Nonlinear Seismic Response Analysis for Hong Kong-Zhuhai-Macau Bridge

Electronic Supplementary Information. Highly Effective Molecule Converting Strategy Based on. Enzyme-Free Dual Recycling Amplification for

Study on Metering Scheme of Seismic Experiment for Shear Wall Built with Precast Hollow Slab

An Indian Journal FULL PAPER ABSTRACT KEYWORDS. Trade Science Inc. Visualization method research of butt weld magnetic flux leakage

Study on the Application of Advanced Power Electronics in Smart Grid

Air Force Office of Scientific Research

A Service Quality Contingency Model Approach to the Willingness of Revisit a Leisure Farm

Power Distribution Grid Service Restoration Software Based on Load Balancing

An RFID Data Cleaning Strategy Based on Maximum Entropy Feature Selection

Multi-body dynamics and Biomedical Engineering Development

Study on the Analysis of Excavator Boom: A Review

IMPROVE COOLING EFFECT OF INJECTION MOLDING BY PULSED-COOLING METHOD

Design of Fuzzy Drip Irrigation Control System Based on ZigBee Wireless Sensor Network

High Sensitivity of Phase-based Surface Plasmon Resonance in Nano-cylinder Array

An Empirical Research on Financial Crisis Early Warning System from the Inventory Perspective

Method of Optimal Scheduling of Cascade Reservoirs based on Improved Chaotic Ant Colony Algorithm

Available online at ScienceDirect. Energy Procedia 44 (2014 )

Die design and process optimization of plastic gear extrusion

RESEARCH OF BEIJING AGRICULTURE INFORMATION SERVICE PLATFORM BASED ON SOA ARCHITECTURE

*Corresponding author. Keywords: Logistics management specialty, Experimental course system, Local colleges and universities in Guangxi.

Interfacial Reactions between the Sn-9Zn Solder and Au/Ni/SUS304 Multi-layer Substrate

Part I Keynote Lecture Progress of Acoustic Emission Technology on Pressure Equipment in China... 3 Gongtian Shen

and MSN:

Seismic Control of Continuous Bridges Using Variable Radius Friction Pendulum Systems and Viscous Fluid Dampers

IAM. International Conference on Innovation and Management. Publisher Cheng-Kiang Farn. Published By Society for Innovation in Management

NiPt salicide process improvement for 28nm CMOS with Pt(10%) additive

Enterprise IT application evaluation based on BP neural network in Tianjin city

Rheo-squeeze casting of semi-solid A356 aluminum alloy slurry

Curriculum vitae. Profile. Experience. Name Navneet Kumar Dubey. Phone. . My homepage nkdubey.com. Academic studies & career RESEARCH INTERESTS

A STUDY ON THE PRACTICAL MODEL OF PLANNED EFFECTIVE RAINFALL FOR PADDY FIELDS IN TAIWAN

Procedia Computer Science

NUMERICAL SIMULATION ON A JOINT SEGMENT OF A PRESTRESSED PREFABRICATED SECTIONAL WIND TURBINE BLADE MODEL

Active Geotechnical Treatment Technology for Permafrost Embankment of Qinghai-Tibet Railway

ISSN: ISO 9001:2008 Certified International Journal of Engineering and Innovative Technology (IJEIT) Volume 3, Issue 6, December 2013

Applying RFID Hand-Held Device for Factory Equipment Diagnosis

Transcription:

Poster Session 1 Time:13:30-15:00 Guoqing Ma, Yantai University, China Jieh-Shian Young, National Changhua University of Education, Taiwan 1005 ESTABLISHING A SMART HOME BASED ON NI MYRIO Kai-chao Yao, wei hzer huang, Yan-mao Wang, Li-chiou Hsu 1012 1016 APPLICATION OF CAE SIMULATION ON CONFORMAL COOLING CHANNEL DESIGN AND ANALYSIS FOR BLOW MOLD ROTATING DYNAMIC VIBRATION BEHAVIOR ANALYSIS OF TURBINE BLADES Hsin-Shu Peng, Kai-Fu Liew, Po-Wei Huang, Pei-Sheng Pan, Te-Ming Jou Gwo-Chung Tsai 1019 BLADE CURVATURE EFFECT ON VERTICAL-AXIS WIND TURBINE PERFORMANCE Huei Chu Weng, Po Shun Tseng 1021 GEOMETRY APPROACH TO PASSING A GATE FOR AGV WITH LRF Jieh-Shian Young 1023 1024 A FLEXIBLE VOLTAGE, CURRENT AND TEMPERATURE MICROSENSOR FOR REAL-TIME MONITORING OF VANADIUM REDOX FLOW BATTERY INTERNAL REAL-TIME WIRELESS MICROSCOPIC DIAGNOSIS FOR FUEL CELL STACK AND ITS APPLICATION ON ELECTRIC MOTORCYCLE RANGE EXTENDER Chi-Yuan Lee, Chin-Lung Hsieh, Chia-Hung Chen, Kin-Fu Lin, Chong-An Jiang, Yen-Pu Huang Chi-Yuan Lee, Yu-Chun Chiang, Chia-Hung Chen, Ti-Ju Lee, Pai-Hsuan Wu, Heng-I Yueh 0

Poster Session 1 Time:13:30-15:00 Guoqing Ma, Yantai University, China Jieh-Shian Young, National Changhua University of Education, Taiwan 1025 1026 1027 1030 TEMPERATURE AND HUMIDITY MICROSENSOR FOR INTELLIGENT PRODUCTION OF ROLL-TO-ROLL PROCESS FUEL CELL STACK REAL-TIME REMOTE MICROSCOPIC DIAGNOSIS TECHNOLOGY DEVELOPMENT FOR UNMANNED AERIAL VEHICLES APPLICATION OF 3-IN-1 MICROSENSOR TO MICROSCOPIC DIAGNOSIS OF INTERNAL STATE OF PEM WATER ELECTROLYSIS SYSTEM NUMERICAL SIMULATION FOR THE DYNAMIC RESPONSE OF BI-DIRECTIONAL POROUS GAS THRUST BEARING SYSTEMS Chi-Yuan Lee, Shuo-Jen Lee, Jyun-Ting Lin, Yi-Chang Shiu, Chao-Yang Hsu, Po-Yeng Chao Chi-Yuan Lee, Yu-Chun Chiang, Chia-Hung Chen, Yi-Chang Shiu, Chao-Hsuan Tsai, Pai-Hsuan Wu, Heng-I Yueh Chi-Yuan Lee, Yu-Chun Chiang, Chia-Hung Chen, Guo-Bin Jung, Shih-Chun Li, Yen-Ting Huang, Yan-Juin Leo Cheng-Chi Wang, Tsui-Er Lee 1033 THERMOELECTRIC COGENERATION SYSTEM WITH METHANOL STEAM REFORMER OF PEM FUEL CELL Jenn-Kun Kuo, Chung-Neng Huang 1042 DEVELOPMENT OF TARGET LOCATION SOFTWARE USING IMAGE PROCESSING Kuo-Yi Hunag, Ding-Yuan Chang 1062 PNEUMATIC REGULATING MODULE OF REGENERATIVE BRAKING SYSTEM IN ELECTRIC BUS Tao Yu, Wentao Liu, Dongsheng Sun, Zhongshi Zhang 1

Poster Session 1 Time:13:30-15:00 Guoqing Ma, Yantai University, China Jieh-Shian Young, National Changhua University of Education, Taiwan 1063 THE CURRENT STATUS AND DEVELOPMENT TREND OF VEHICLE LOCATION Shuliang Zhu, Jianqiang Wang, Tao Yu, Jiao Wang 1066 LATERAL COUPLED VIBRATION OF BUCKET AND PLATFORM IN CABLE-GUIDED HOISTING SYSTEM Jinjie Wang, Tao Yu, Jiao Wang 1068 1070 1201 VIBRATION AND FRICTION DAMPING ANALYSIS OF BLADES WITH DOVETAIL ATTACHMENT CONSTRUCTION AND APPLICATION OF A STABLE NODAL INTEGRATION METHOD IN COMPUTATIONAL ELECTROMAGNETICS ON TETRAHEDRAL MESHES THE KEY FACTOR OF PULL-IN VOLTAGE OF MICRO TORSION-MIRROR STRUCTURE Jiao Wang, Tao Yu, Yuehao Zhang, Qingkai Han Hui Feng, Xiang-Yang Cui Wan-Chun Chuang, Kai Chen 1202 EMPIRICAL FORMULA ABOUT PULL-IN VOLTAGE OF MICRO TORSION-MIRROR Wan-Chun Chuang, Kai Chen 2

Poster Session 2 Time:15:30-17:00 Tao Yu, Yantai University, China Jenn-Kun Kuo, National University of Tainan, Taiwan 1034 A HYBRID NUMERICAL SCHEME FOR DYNAMIC BEHAVIOR OF NONLINEAR MEMS DEVICES Chin-Chia Liu 1035 OPTIMIZATION ANALYSIS OF CONTROLLED COOLING PORCESS FOR H-SHAPE STEAM BEAMS Jiin-Yuh Jang, Yu-Feng Gan 1040 1043 1044 DESIGN OF MICRO TORSION-MIRROR AND ITS ELECTROMECHANICAL BEHAVIOR MATHEMATICAL MODELING AND COMPENSATING METHODS OF SPATIAL POSITIONING ACCURACY OF A SIX-AXIS INDUSTRIAL ROBOT CHARACTERIZATION OF ANTI-ULTRAVIOLET ZnO THIN FILM BY RF REACTIVE MAGNETRON SPUTTER Wan-Chun Chuang, Kai Chen Hau-Wei Lee, Chung-Yu Wu, Chien Hung Liu Tsung Chieh Cheng, Te-Hua Fang 1045 STAG BEETLE-SHAPED VEHICLE WITH BLUETOOTH REMOTE CONTROL Shao-Yu Chien, Pei-Hsing Huang 1046 BIO-HEAT TRANSFER WITH LOCAL NON-EQUILIBRIUM EFFECT Kuo-Chi Liu, Po-Jeng Cheng 3

Poster Session 2 Time:15:30-17:00 Tao Yu, Yantai University, China Jenn-Kun Kuo, National University of Tainan, Taiwan 1052 1053 1055 1057 THE CONFIGURATION DESIGN AND LOAD ANALYSIS OF 2MW WIND TURBINE BLADE COMMON-PATH LASER ENCODER FOR LARGE-PITCH GRATING SCALE IDENTIFICATION OF THE SCARPING QUALITY PARAMETERS FOR THE MACHINE TOOL USING THE SMARTPHONE EFFECTS OF FUNCTIONAL INSTABILITY ANKLE BY HIGH-POSITION LANDING PILOT STUDY Yu-ping Xie, Chuan-ning Xie, Yi-bao Chen, Yong-sheng Chai Chyan-Chyi Wu, Yi-Hau Wu, Cheng-Chih Hsu, Jun Ge, Yifei Wu Ming Fei Chen, Wen-Tse Hsiao, Cheng-Wen Chen Po-Hong Huang, Wan-Chin Chen, Hui-Ying Lin, Yi-Cheng Chen 1059 STRENGTH ASSESSMENT OF THE 3D PRINTS WITH FDM PROCESS ON A REPRAP PLATFORM Chieh Kung 1060 1061 RESEARCHING FOR AUTOMOBILE ANTI-LOCK BRAKING SYSTEM ONLINE DETECTION EXPERIMENTAL STUDY ON TEMPERATURE FIELD INFLUENCE FACTORS IN ACTIVE REGENERATION PROCESSES OF DIESEL PARTICULATE FILTER Wang Junda, Li Baoshun, Jiang Yuping, Gao Lu, Zhao Gaopeng Chuandong Li, Yantao Wang, Jun Zhang, Bo Yang, Guoyang Wang, Shijin Shuai 4

Poster Session 2 Time:15:30-17:00 Tao Yu, Yantai University, China Jenn-Kun Kuo, National University of Tainan, Taiwan 1064 VALENCE ELECTRON STRUCTURES OF ZrNi AND ITS HYDRIDE Lei Zhang, Shichun Li, Yang Li 1065 1069 A NEW HOISTING DEVICE FOR THE TRANSDUCER OF USBL TOWARDS A GENERIC SOFTWARE FRAMEWORK FOR PARAMETRIC COMPONENT LIBRARIES TO REUSE EXISTING DESIGN Yongsheng Chai, Man Jiang, Jing Zhou, Linglong Mou, Yanli Yue, Jilei Zhang Bin Zhu, Yantao Wang 1203 SIMULATION ON A TUNING-FROK LEVEL SENSOR Ming-Jun Kuo, Yuh-Chung Hu 1204 REVIEW ON THE SIMULATION OF CONDENSER MICROPHONES Yuh-Chung Hu 5

6 2017/5/10