POTASSIUM PHOSPHATE DIBASIC ANHYDROUS

Similar documents
WRIGHT STAIN. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

D-(+)-Lactose, Monohydrate

Rose Bengal (C.I )

Butyric Acid, Sodium Salt

Iodic Acid. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

CALCIUM PHOSPHATE MONOBASIC

WARNING! MAY BE HARMFUL IF SWALLOWED, INHALED OR ABSORBED THROUGH SKIN. MAY CAUSE IRRITATION TO SKIN, EYES, AND RESPIRATORY TRACT.

POTASSIUM BICARBONATE

D-(+)-Lactose, Monohydrate

DEXTROSE MONOHYDRATE POWDER USP

ALUMINUM OXIDE. Emergency Overview CAUTION! MAY CAUSE IRRITATION TO SKIN, EYES, AND RESPIRATORY TRACT.

MSDS Number: S2954 * * * * * Effective Date: 09/12/03 * * * * * Supercedes: 05/16/03 SODIUM BICARBONATE

Calcium Lactate, 5-Hydrate

POTASSIUM FERRICYANIDE

PHENOLPHTHALEIN. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

phone numbers only in the event All non-emergency questions should be directed to Customer Service ( ) for assistance.

SODIUM PYROPHOSPHATE

WARNING! HARMFUL IF INHALED. AFFECTS RESPIRATORY SYSTEM. MAY CAUSE IRRITATION TO EYES AND RESPIRATORY TRACT.

SODIUM PYROPHOSPHATE

MSDS Number: S6410 * * * * * Effective Date: 11/02/01 * * * * * Supercedes: 11/17/99 STANNIC OXIDE. 2. Composition/Information on Ingredients

MAGNESIUM CHLORIDE Page 1 of 7

POTASSIUM SODIUM TARTRATE

FERRIC AMMONIUM SULFATE

HydroGlobe HMRP MSDS Effective Date 01/10/05 1. Product Identification 2. Composition/Information on Ingredients 3. Hazards Identification

SODIUM CITRATE Page 1 of 7

FERRIC AMMONIUM CITRATE

CALCIUM NITRATE. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

Univar USA Inc Carillon Point Kirkland, WA (425)

SILICA GEL. Emergency Overview CAUTION! MAY CAUSE IRRITATION TO SKIN, EYES, AND RESPIRATORY TRACT.

MSDS Number: S1658 * * * * * Effective Date: 08/02/01 * * * * * Supercedes: 08/20/98. Silica Gel GF

CITRIC ACID. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

FERRIC SULFATE. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

SUCROSE. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

SODIUM THIOCYANATE. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

Material Safety Data Sheet SODIUM BICARBONATE

MAGNESIUM SULFATE ANHYDROUS MATERIAL SAFETY DATA SHEET

TRIETHYLENE GLYCOL. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification


POLYETHYLENE GLYCOL SECTION 1: IDENTIFICATION SECTION 2: HAZARD IDENTIFICATION. Product Name: POLYETHYLENE GLYCOL. CAS Number:

Material Safety Data Sheet LACTOSE 1. Product Identification

SODIUM ACETATE. Emergency Overview CAUTION! MAY CAUSE IRRITATION TO SKIN, EYES, AND RESPIRATORY TRACT.

SULFUROUS ACID. Emergency Overview DANGER! CORROSIVE. CAUSES BURNS TO ANY AREA OF CONTACT. HARMFUL IF SWALLOWED OR INHALED.

SODIUM BISULFATE. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

POTASSIUM CHLORIDE 4.0 M SOLUTION H.M.S. Beagle 180 English Landing Drive Suites Parkville, MO

WARNING! HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN, EYES AND RESPIRATORY TRACT.

MSDS Number: T5382 * * * * * Effective Date: 05/17/01 * * * * * Supercedes: 06/02/98 TRIETHYLENE GLYCOL

CHROMIUM SULFATE

SULFUR. Ingredient CAS No Percent Hazardous Sulfur % Yes

COBALT SULFATE. Ingredient CAS No Percent Hazardous

MSDS CALCIUM CHLORIDE

ZINC METAL POWDER. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

PROPYLENE GLYCOL. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

Buffer Solution (Borate), ph 10 (Color Coded Blue)

SODIUM CHLORATE. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

CALCIUM HYDROXIDE. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification 10/15/2010 CALCIUM HYDROXIDE

BARIUM HYDROXIDE. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

REAGENTS, INC.--MSDS--ZINC STEARATE PAGE -1- ZINC STEARATE. 1. Chemical Product And Company Identification

WARNING! HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN, EYES AND RESPIRATORY TRACT.

POTASSIUM NITRATE. 2. Composition/Information on Ingredients

MATERIAL SAFETY DATA SHEET SUPPLIER: PRODUITS CHIMIQUES ACP CHEMICALS INC.

CALCIUM CHLORIDE, PELLETS

ZINC STEARATE SECTION 1: IDENTIFICATION SECTION 2: HAZARD IDENTIFICATION. Product Name: ZINC STEARATE. CAS Number:

TEAM(R) `Low Na+' Liquid Acid Neutralizer. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

Ingredient CAS No Percent Hazardous Urea % Yes

ALUMINUM, POWDER H.M.S. Beagle 180 English Landing Drive Suites Parkville, MO

MATERIAL SAFETY DATA SHEET Revision Date:

COBALT NITRATE. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

1-Methyl-2-Pyrrolidinone. Material Safety Data Sheet. M-Pyrol

CALCIUM CHLORIDE DIHYDRATE H.M.S. Beagle 180 English Landing Drive Suites Parkville, MO

NITRIC ACID 10% R. S.

MANGANESE DIOXIDE. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

MATERIAL SAFETY DATA SHEET

POTASSIUM NITRATE. H.M.S. Beagle 180 English Landing Drive Suites Parkville, MO

NICKEL NITRATE. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

POTASSIUM HYDROXIDE (10-45%) Solutions and Concentrates

Sodium Silicate Solution

Sodium Phosphate, Dibasic, Anhydrous, USP

IMSDS I MaterialSafety DataSheet /

Safety Data Sheet. Zinc Carbonate. In Case of Emergency Call: CHEMTREC or (24 Hours/Day, 7 Days/Week)

Vanadium Pentoxide. Ingredient CAS No Percent Hazardous

Sodium Bicarbonate, Powder, ACS

SODIUM SULFIDE. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

STANNOUS CHLORIDE Page 1 of 8

SODIUM META-BISULFITE, GRANULAR Page 1 of 8

TopCoat CRT White. Material Safety Data Sheet. Updated: 12/08. Quality You Can Trust Since From North America s Largest Roofing Manufacturer

MATERIAL SAFETY DATA SHEET Product# Oxy-26

SODIUM NITRITE Page 1 of 8

Sodium Silicate Solution

POTASSIUM CHROMATE. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

Safety Data Sheet. In Case of Emergency Call: CHEMTREC or (24 Hours/Day, 7 Days/Week)

Potassium Chloride Saturated, Aqueous

MATERIAL SAFETY DATA SHEET

CHROMIUM TRIOXIDE. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

Safety Data Sheet. Synonyms/Generic Names: Plaster of Paris; Sulfuric acid, calcium salt (1:1) hemihydrates

Safety Data Sheet. In Case of Emergency Call: CHEMTREC or (24 Hours/Day, 7 Days/Week)

MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION / INFORMATION ON INGREDIENTS: ASTOR TILEWORKS SA DE CV.

POISON! DANGER! MAY BE FATAL IF SWALLOWED. CORROSIVE. CAUSES SEVERE IRRITATION AND BURNS TO SKIN, EYES, AND RESPIRATORY TRACT.

SAFETY DATA SHEET Product #: See Section 1

Potassium Sulfite 45%

Calcium Phosphate, Dibasic Anhydrous, Powder FCC

Transcription:

MSDS Number: P6049 * * * * * Effective Date: 03/10/11 * * * * * Supersedes: 09/08/09 1. Product Identification POTASSIUM PHOSPHATE DIBASIC ANHYDROUS Synonyms: Potassium hydrogen phosphate; Potassium phosphate dibasic anhydrous; Phosphoric acid, dipotassium salt; Dipotassium hydrogen phosphate CAS No.: 7758-11-4 Molecular Weight: 174.18 Chemical Formula: K2HPO4 Product Codes: J.T. Baker: 3250, 3251, 3252, 3254, 3257, 4012 Macron: 6917, 7080, 7092, 7295, 7787 2. Composition/Information on Ingredients Ingredient CAS No Percent Hazardous --------------------------------------- ------------ ------------ --------- Potassium Phosphate Dibasic Anhydrous 7758-11-4 98-100% Yes 3. Hazards Identification Emergency Overview -------------------------- CAUTION! MAY BE HARMFUL IF SWALLOWED. SAF-T-DATA(tm) Ratings (Provided here for your convenience) ----------------------------------------------------------------------------------------------------------- Health Rating: 1 - Slight Flammability Rating: 0 - None Reactivity Rating: 0 - None Contact Rating: 0 - None Lab Protective Equip: GOGGLES; LAB COAT Storage Color Code: Green (General Storage) ----------------------------------------------------------------------------------------------------------- Potential Health Effects

---------------------------------- Inhalation: Not expected to be a health hazard. Ingestion: Phosphates are slowly and incompletely absorbed when ingested, and seldom result in systemic effects. Such effects, however, have occurred. Symptoms may include vomiting, lethargy, diarrhea, blood chemistry effects, cardiac effects and central nervous system effects. The toxicity of phosphates is because of their ability to sequester calcium. Acute potassium intoxication by mouth is rare because large single doses usually induce vomiting and because in the absence of pre-existing kidney damage, potassium is rapidly excreted. Potassium poisoning can result in heart effects, change in respiration rate, tingling in the extremities, heaviness in the limbs, nausea and diarrhea. Skin Contact: No adverse effects expected. Eye Contact: No adverse effects expected but dust may cause mechanical irritation. Chronic Exposure: May sequester calcium and cause calcium phosphate deposits in the kidneys. Aggravation of Pre-existing Conditions: Persons with impaired kidney function may be more susceptible to the effects of the substance. 4. First Aid Measures Inhalation: Remove to fresh air. Get medical attention for any breathing difficulty. Ingestion: If swallowed, give several glasses of water to drink to dilute. If large amounts were swallowed or symptoms occur, get medical advice. Never give anything by mouth to an unconscious person. Skin Contact: Wash exposed area with soap and water. Get medical advice if irritation develops. Eye Contact: Wash thoroughly with running water. Get medical advice if irritation develops. 5. Fire Fighting Measures Fire: Not considered to be a fire hazard. Explosion: Not considered to be an explosion hazard. Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire. Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode. 6. Accidental Release Measures Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Spills: Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal.

7. Handling and Storage Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product. 8. Exposure Controls/Personal Protection Airborne Exposure Limits: None established. Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details. Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerine, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres. Skin Protection: Wear protective gloves and clean body-covering clothing. Eye Protection: Safety glasses. Maintain eye wash fountain and quick-drench facilities in work area. 9. Physical and Chemical Properties Appearance: Deliquescent white crystals or powder. Odor: Odorless. Solubility: 150g/100g cold water Specific Gravity: ph: % Volatiles by volume @ 21C (70F): 0 Boiling Point: Not applicable. Melting Point: > 465C (> 869F) Vapor Density (Air=1): Vapor Pressure (mm Hg): Evaporation Rate (BuAc=1):

10. Stability and Reactivity Stability: Stable under ordinary conditions of use and storage. Slightly hygroscopic. Hazardous Decomposition Products: Phosphorus oxides may form when heated to decomposition. Hazardous Polymerization: Will not occur. Incompatibilities: No incompatibility data found. Conditions to Avoid: 11. Toxicological Information No LD50/LC50 information found relating to normal routes of occupational exposure. --------\Cancer Lists\------------------------------------------------------ ---NTP Carcinogen--- Ingredient Known Anticipated IARC Category ------------------------------------ ----- ----------- ------------- Potassium Phosphate Dibasic No No None Anhydrous 12. Ecological Information Environmental Fate: Environmental Toxicity: 13. Disposal Considerations Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements. 14. Transport Information Not regulated. 15. Regulatory Information --------\Chemical Inventory Status - Part 1\--------------------------------- Ingredient TSCA EC Japan Australia ----------------------------------------------- ---- --- ----- --------- Potassium Phosphate Dibasic Anhydrous Yes Yes Yes Yes --------\Chemical Inventory Status - Part 2\--------------------------------- --Canada--

Ingredient Korea DSL NDSL Phil. ----------------------------------------------- ----- --- ---- ----- Potassium Phosphate Dibasic Anhydrous Yes Yes No Yes --------\Federal, State & International Regulations - Part 1\---------------- -SARA 302- ------SARA 313------ Ingredient RQ TPQ List Chemical Catg. ----------------------------------------- --- ----- ---- -------------- Potassium Phosphate Dibasic Anhydrous No No No No --------\Federal, State & International Regulations - Part 2\---------------- -RCRA- -TSCA- Ingredient CERCLA 261.33 8(d) ----------------------------------------- ------ ------ ------ Potassium Phosphate Dibasic Anhydrous No No No Chemical Weapons Convention: No TSCA 12(b): No CDTA: No SARA 311/312: Acute: Yes Chronic: No Fire: No Pressure: No Reactivity: No (Pure / Solid) Australian Hazchem Code: None allocated. Poison Schedule: None allocated. WHMIS: This MSDS has been prepared according to the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all of the information required by the CPR. 16. Other Information NFPA Ratings: Health: 1 Flammability: 0 Reactivity: 0 Label Hazard Warning: CAUTION! MAY BE HARMFUL IF SWALLOWED. Label Precautions: Wash thoroughly after handling. Label First Aid: If swallowed, give several glasses of water to drink to dilute. If large amounts were swallowed or symptoms occur, get medical advice. Never give anything by mouth to an unconscious person. Product Use: Laboratory Reagent. Revision Information: No Changes.

Disclaimer: ********************************************************************************************** THE INFORMATION PRESENTED IN THIS MATERIAL SAFETY DATA SHEET (MSDS/SDS) WAS PREPARED BY TECHNICAL PERSONNEL BASED ON DATA THAT THEY BELIEVE IN THEIR GOOD FAITH JUDGMENT IS ACCURATE. HOWEVER, THE INFORMATION PROVIDED HEREIN IS PROVIDED AS IS, AND AVANTOR PERFORMANCE MATERIALS MAKES AND GIVES NO REPRESENTATIONS OR WARRANTIES WHATSOEVER, AND EXPRESSLY DISCLAIMS ALL WARRANTIES REGARDING SUCH INFORMATION AND THE PRODUCT TO WHICH IT RELATES, WHETHER EXPRESS, IMPLIED, OR STATUTORY, INCLUDING WITHOUT LIMITATION, WARRANTIES OF ACCURACY, COMPLETENESS, MERCHANTABILITY, NON-INFRINGEMENT, PERFORMANCE, SAFETY, SUITABILITY, STABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING, COURSE OF PERFORMANCE, OR USAGE OF TRADE. THIS MSDS/SDS IS INTENDED ONLY AS A GUIDE TO THE APPROPRIATE PRECAUTIONARY HANDLING OF THE MATERIAL BY A PROPERLY TRAINED PERSON USING THIS PRODUCT, AND IS NOT INTENDED TO BE COMPREHENSIVE AS TO THE MANNER AND CONDITIONS OF USE, HANDLING, STORAGE, OR DISPOSAL OF THE PRODUCT. INDIVIDUALS RECEIVING THIS MSDS/SDS MUST ALWAYS EXERCISE THEIR OWN INDEPENDENT JUDGMENT IN DETERMINING THE APPROPRIATENESS OF SUCH ISSUES. ACCORDINGLY, AVANTOR PERFORMANCE MATERIALS ASSUMES NO LIABILITY WHATSOEVER FOR THE USE OF OR RELIANCE UPON THIS INFORMATION. NO SUGGESTIONS FOR USE ARE INTENDED AS, AND NOTHING HEREIN SHALL BE CONSTRUED AS, A RECOMMENDATION TO INFRINGE ANY EXISTING PATENTS OR TO VIOLATE ANY FEDERAL, STATE, LOCAL, OR FOREIGN LAWS. AVANTOR PERFORMANCE MATERIALS REMINDS YOU THAT IT IS YOUR LEGAL DUTY TO MAKE ALL INFORMATION IN THIS MSDS/SDS AVAILABLE TO YOUR EMPLOYEES. ********************************************************************************************** Prepared by: Environmental Health & Safety