SILICONE POLYMER SERIES 13 Silicone Coated Polyester PET Solvent thermal cured PT catalyst 1 14 1 1 8 4 Test method: 24h 7 C - 7 2-3 mm/min Tesa 747 11 3 1R137 2R1317 3R1318 R1319 8R1313 1R133 19R131 42 1 1 31R131 11 3 42 1 1 13 28 7 1 138 2 37 Tapes Industrial Pre-preg Medical Very stable release over time also on the very tight release versions. Ideal also with modified acrylic adhesives.
SILICONE POLYMER SERIES 13 low RAINBOW Silicone Coated Polyester PET Solvent thermal cured PT catalyst 4 4 3 3 2 1 1 Test method: 24h 7 C - 7 2-3 mm/min Tesa 747 4 34 1 11 1R1317 2R13117 3R13118 R13119 8R131 11 1 34 4 13 28 4 8 113 Tapes Industrial Pre-preg Medical Optical application Very stable release over time also on the very tight release versions excellent also with modified acrylic adhesives. The silicone has no rainbow effect or newton rings
SILICONE POLYMER SERIES 1 Silicone Coated Polyester PET Solvent thermal cured PT catalyst 3 2 1 1 Test method: 24h 7 C - 7 2-3 mm/min Tesa 747 11 1 1R13 2R14 3R1 4R18 R12 11 1 21 2 1 28 4 3 21 2 Tapes Label Industrial Pre-preg Medical Excellent release with acrylic and rubber adhesives. CRA added to the formulation can interact with some acrylic adhesives, our suggestion is therefore to use series 13 for tight release silicone formulations. Serie 1 (easy release version) is also used for process liner increasing the applied quantity of silicone. On this purpose the D 1R17 (silicone double layer on one side) and T 1R17/1R13 (silicone double layer on one side and standard silicone layer on reverse side) are available.
SILICONE POLYMER SERIES 1 Silicone Coated Polyester PET Solvent thermal cured TIN catalyst 18 1 14 12 1 8 4 2 Test method: 24h 7 C - 7 2-3 mm/min Tesa 747 1R11 1 Tapes Industrial Labels Very stable release over time. Available only one side coated. Having tin catalyst this silicone coating is suitable for adhesives that are incompatible with platinum catalyzed silicone.
SILICONE POLYMER SERIES 11 Silicone Coated Polyester PET Solvent thermal cured PT catalyst 9 8 7 4 3 1 Test method: 24h 7 C - 7 2-3 mm/min Tesa 747 8 11 1 21 1R1114 2R1118 3R1117 4R1121 R11 8R1123 1R1122 8 11 1 21 29 44 83 28 4 3 73 11 8 29 44 83 Tapes Industrial Pre-preg Medical This silicone polymer cures on different types of film even if chemical components that can reduce the silicone polymerization are present. Controlled release version has to be carefully tested to avoid lock up problem over time. This silicone is also light sensitive, release values can increase over time if the material is not properly protected and covered with adhesive.
SILICONE POLYMER SERIES 3 easy easy release Silicone Coated Polyester PET Solvent-less thermal cured PT catalyst 7 4 3 2 1 Test method: 24h 7 C - 7 2-3 mm/min Tesa 747 3 R322 R31 3 8 1 Tapes Industrial Pre-preg Medical Building & construction Very easy release with acrylic adhesives, Hot melt, bituminous compounds, butylic adhesives R31 silicone can interact with certain acrylic adhesives, R322 does not.
SILICONE POLYMER SERIES FOR LABEL Silicone Coated Polyester PET Solvent thermal cured PT catalyst (1R11-1R134) Solvent thermal cured TIN catalyst (1R11) 18 1 14 12 1 8 4 2 Test method: 24h 7 C - 7 2-3 mm/min Tesa 747 1R11 1R134 1R11 Series 1 Series 13 Series 1 13 1 1 Labels
SILPROP S SILPROP B SILICONE POLYMER SERIES 1-11-13 Silicone Coated Stentered bi-oriented Polypropylene Silicone Fluorosilicone Coated Blown Coated bi-oriented Film Polypropylene PP PP PP Solvent thermal silicones 1R11 TIN catalyst 1R112 and XR1338 PT catalyst 12 1 8 4 2 Test method: 24h 7 C - 7 2-3 mm/min Tesa 747 7 4 1R11 1R112 XR1338 Series 1 Series 11 Series 13 4 7 1 13 18 Tapes Industrial Labels SILPROP
SILPROP CP SILICONE POLYMER SERIES 13 Silicone coated Coextruded bi-oriented Polypropylene PP Solvent thermal cured PT catalyst Test method: 24h 7 C - 7 2-3 mm/min Tesa 747 3 3 29 2 21 1 1 4R1337 XR1322 21 3 29 73 Tapes Industrial Tight release coatings. Suggested to be used as tight side on the differential coated film for its high stability over time.(easy side suggested series 3). SILPROP
SILPROP CP SILICONE POLYMER SERIES 13 Silicone coated Coextruded bi-oriented Polypropylene PP Solvent thermal cured PT catalyst Test method: 24h 7 C - 7 2-3 mm/min Tesa 747 3 3 29 2 21 1 1 4R1337 XR1322 21 3 29 73 Tapes Industrial Tight release coatings. Suggested to be used as tight side on the differential coated film for its high stability over time.(easy side suggested series 3). SILPROP
SILICONE POLYMER SERIES 11-12 SILPROP M Silicone Coated Mono-oriented Polypropylene PP Solvent thermal cured PT catalyst Test method: 24h 7 C - 7 2-3 mm/min Tesa 747 3 3 2 1 1 3 1 8 9 1R11 1R1114 3R1117 R11 Series 12 Series 11 Series 11 Series 11 8 9 1 3 23 4 7 Tapes Industrial Medical Series 11 is light sensitive, release values can increase over time if not properly protected and covered with adhesive. SILPROP
SILPROP K SILICONE POLYMER SERIES Silicone Coated Cast-embossed Polypropylene PP Solvent thermal cured PT catalyst 4 4 3 3 2 1 1 Test method: 24h 7 C - 7 2-3 mm/min Tesa 747 39 12 1R1113 2R114 7R1139 12 39 1 3 98 Tapes Industrial On SILPROP K this silicone series is the only available. Series 11 is light sensitive, release values can increase over time if not properly protected and covered with adhesive This product is suggested for cliché mounting tape. SILPROP
SILICONE POLYMER SERIES 11-3 - 32 SILTHENE HD Silicone coated High Density Polyethylene PE XR321-1R31 Solvent-less thermal cured PT catalyst 1R1114 - R1117 Solvent thermal cured PT catalyst 3 2 1 1 Test method: 24h 7 C - 7 2-3 mm/min Tesa 747 3 XR321 1R31 1R1114 R1117 series 3 series 32 series 11 series 11 3 1 28 8 13 1 4 7 28 Tapes Industrial Self adhesive membrane & roofing SILTHENE
SILICONE POLYMER SERIES 11-3 - 32 SILTHENE LD Silicone coated Low Density Polyethylene PE 1R1114 Solvent thermal cured PT catalyst 1R31-R38-XR34 Solvent-less thermal cured PT catalyst 3 2 1 1 Test method: 24h 4 C 3 mm/min Tesa 747 3 R38 1R31 1R1114 XR34 series 3 series 32 series 11 series 32 3 7 9 23 8 18 7 9 23 23 8 Tapes Industrial Building & construction SILTHENE
FLUOROSILICONE SILFLU Fluorosilicone Coated Film PET Solvent thermal cured fluoro chemistry Test method 1W 7 C - 3 mm/min 3M1218 Code 1R81: 24h 7 C - 3 mm/min Tesa 747 18 1 14 12 1 8 4 2 1R81 1R881 1R882 XR871 series 82 series 88 series 88 series 87 13 13 11 11 13 28 Tapes Industrial Medical 1R881 and 1R882 codes are using the same polymers with different coating weight XR871 high competitive fluoro chemistry, can be used for both methylic and phenylic silicone PSA 1R81 is mainly working with phenylic silicone PSA but with limitations. This fluorosililicone is tested only with Tesa 747 SILFLU
SILFREE SILFREE SC Silicone-free Coating PET Silicone Code XR191 Test method: 24h 7 C - 7 2-3 mm/min Tesa 747 4 4 3 3 2 1 13 11 12 11 1 24 hours 1 week 2 weeks 3 weeks 13 11 12 11 33 28 3 28 PCB and FPCB This quality is called SILFREE SC and according to the IDEMA test and depending on the Lab that is performing the test, we can find a silicon contamination from to ng (cm2). SILFREE