ManSafe for Roofing Product Selector UK E--SG-UK-001
The Complete Roof Access Solution The Latchways Product Selector is designed to help you identify the part numbers of the products required to provide the best solution for your customer s roof access requirements. Latchways have three core systems that can be used for safe roof access; s, VersiRail and WalkSafe, as well as a range of ancillary rooftop products. 2
Constant Force Post Latchways developed the (CFP) to work on all major roof types using a variety of different sized base plates and fixing methods. There are specific part numbers for base plates and fixing kits, on occasion they may be combined as a single part number. Please follow the flow chart below to find your best suited product. Where Latchways has developed a strong working relationship with different manufacturers, CFP s have been given their own specific manufacturers part number. By following this simple flowchart and using the product selector table in the following pages, you should quickly be able to find the part numbers you are looking for. Membrane What is the roof type metal PROFILE or membrane? Metal Profile Warm Is it a warm or cold roof? Standing Seam Is it a standing seam, BUOS or composite roof? Composite Cold BUOS Is the membrane made by any of the following? Sika Sarnafil, Protan, ICOPAL, Bauder, IKO Spectraplan and Polyfin Is the membrane made by any of the following? Sarnafil, Protan, ICOPAL, Bauder, IKO Spectraplan and Polyfin Is the standing seam a folded or bulb type? Is the composition of the roof sheet Aluminium or Steel? Is the composition of the roof sheet Aluminium or Steel? Yes No Yes No Folded Bulb Steel Alu. Steel Alu. The CFP is specific to the manufacturer and the fixing kit is dependent on roof material, insulation depth and deck type (see table on page 4) Select the CFP based on roof material, insulation depth and deck type (see table on page 4) The CFP is specific to the manufacturer and is used with a cold roof fixing kit (see table on page 5) Select the CFP based on roof material and select a cold roof fixing kit (see table on page 5) Is the standing seam manufactured by Kalzip or Euroclad? Is the standing seam manufactured by Kalzip or Euroclad? The CFP is based on the crown frequencies and used and fixed with stitching screws (see table on page 6) The CFP is based on the crown frequencies and used and fixed with rivets (see table on page 6) The CFP is based on the crown frequencies and fixed with stitching screws (see table on page 6) The CFP is based on the crown frequencies and fixed with a rivet (see table on page 6) Yes No Yes No There will be a specific Kalzip or Euroclad specific CFP product which may or may not include the fixings (see table on page 7) There will be a specific CFP product for seam width which may or may not include the fixings (see table on page 7) There will be a specific Kalzip or Euroclad specific CFP product which may or may not include the fixings (see table on page 7) There will be a specific CFP product for seam width which may or may not include the fixings (see table on page 7) Note: Green roofs are not covered by this flowchart please see green roof information on pages 8 and 9. 3
Membrane Roofs Warm Roof Construction Roof Material PVC Bitumen TPO EPDM FPO TPE Other 65616-00 65619-00 65662-00 65662-00 65662-00 65662-00 65662-00 Fixings (Timber and metal deck): determined by insulation depth 50 130 mm Insulation 65621-00 65621-00 65621-00 65621-00 65621-00 65621-00 65621-00 130 220 mm Insulation 65624-00 65624-00 65624-00 65624-00 65624-00 65624-00 65624-00 220 320 mm Insulation 65669-00 65669-00 65669-00 65669-00 65669-00 65669-00 65669-00 Concrete Deck fixing kit 65628-00 65628-00 65628-00 65628-00 65628-00 65628-00 65628-00 Specific Manufacturers Sika Sarnafil ICOPAL Protan Bauder Bituminous Bauder Thermoplan Sika Sarnafil TC (T) IKO Spectraplan and Polyfin 65616-00 65662-00* 65604-00 (D,L,N) 65690-00 65632-00 65617-00 Fixings: determined by insulation depth 50 130 mm Insulation 65621-00 65605-00 65621-00 65621-00 65621-00 130 220 mm Insulation 65624-00 65627-00 65624-00 65624-00 65624-00 220 320 mm Insulation 65669-00 65669-00 65669-00 65669-00 Concrete Deck fixing kit 65628-00 65628-00 65628-00 65628-00 *A 65663-00 weathering cap is included with this to facilitate a waterproof fixing and ensure adequate weathering detail is achieved. 65616-00 65619-00 65662-00 65604-00 65690-00 Concrete fixing 65628-00 65632-00 65617-00 Fixings determined by depth 50 130 mm insulation 65621-00 Fixings determined by depth 130 220 mm insulation 65624-00 Fixings determined by depth 220 320mm insulation 65669-00 The Latchways Product Selector is designed to help you select the correct products for membrane warm roofs whether the manufacturer is known or not. For further information email spec@latchways.com. 4
Membrane Roofs Cold Roof Construction Roof Material PVC Bitumen TPO EPDM FPO TPE Other Cold Roof Bitumen 65616-00 65619-00 65662-00* 65662-00* 65662-00* 65662-00* 65662-00 65683-00 Fixings: non concrete roofs (A sub-frame is available. A sub-frame negates the need to recess fixings positions to a cold roof deck whilst also providing the correct transition angle for the membrane weathering detail). 65631-00 ( sub-frame not required) Fixings: concrete roofs (A sub-frame is available. A sub-frame negates the need to recess fixings positions to a cold roof deck whilst also providing the correct transition angle for the membrane weathering detail). 65628-00 ( sub-frame not required) Specific Manufacturers Sika Sarnafil Protan ICOPAL Bauder Bituminous Bauder Thermoplan Sika Sarnafil T Membranes IKO Spectraplan and Polyfin 65616-00 65604-00 (D,L,N**) ( sub-frame not required) 65662-00* 65690-00 65632-00 65617-00 Fixings: non concrete roofs (A sub-frame is available. A sub-frame negates the need to recess fixings positions to a cold roof deck whilst also providing the correct transition angle for the membrane weathering detail). Fixings: concrete roofs (A sub-frame is available. A sub-frame negates the need to recess fixings positions to a cold roof deck whilst also providing the correct transition angle for the membrane weathering detail). *A 65663-00 weathering cap is included with this to facilitate a waterproof fixing and ensure adequate weathering detail is achieved. **D Dark grey weatherproof membrane, L Light grey weatherproof membrane, N without weatherproof membrane. 65616-00 65619-00 65662-00 65604-00 65690-00 Concrete fixings 65628-00 65632-00 65617-00 65683-00 65631-00 sub-frame The Latchways Product Selector is designed to help you select the correct products for membrane cold roofs whether the manufacturer is known or not. For further information email spec@latchways.com. 5
BUOS and Composite Roofs Crown Frequency 250 300 333 380.5 400 456 500 65601-00 65615-00 65603-00 & 65602-00 65649-00 65602-00 65649-00 65603-00 Fixings BUOS/Composite Aluminium Rivet BUOS/Composite Steel Stitching Screw 65620-03 65620-03 65620-03 65620-03 65620-03 65620-03 65620-03 65714-00* 65714-00* 65714-00* 65714-00* 65714-00* 65714-00* 65714-00* *Supplied in bags of 100 (16 required per post). Cement Fibre Roofs 67605-00* Fixings: Steel/Stitching Screw 66227-00** *For 2 users only. **Supplied in bags of 100 (16 required per post). 65601-00* 65602-00 65603-00 65615-00 65649-00 Fixings: BUOS/Composite Aluminium Rivet 65620-03 Aluminium rivet for attaching to aluminium sheet. Fixings: BUOS/Composite Steel Stitching Screw 65714-00 *Can only be used as an intermediate post. For an end anchor or corner a 65603-00 should be used. Steel stitching screw for attaching to steel sheet The Latchways Product Selector is designed to help you select the correct products for BUOS and Composite roofs whether the manufacturer is known or not. For further information email spec@latchways.com. 6
Standing Seam Roofs Crown Frequency 300/305 400 429 500 600 295/505 380/610 (Bulb Standing Seam Roof) 51001-00 51001-00 51110-00 51101-00 65618-00NC 65664-00 65682-00 Fixings: Split clamp 50300-00 50301-00 (Folded Standing Seam Roof) 51000-00 51000-00 51110-00 51100-00 65618-00 65664-00NC 65682-00MR Fixings: S5! Clamp 65647-00 65647-00 65647-00 65647-00 65647-00 Kalzip Part Numbers (Bulb Standing Seam Roof) 51001-00K 51001-00K 51110-00K 51101-00K Fixings: Split clamp 50300-00 (Folded Standing Seam Roof) 51001-00 51001-00 51110-00 51100-00 65618-00 65664-00NC 65682-00MR Fixings: S5! Clamp 65647-00 65647-00 65647-00 65647-00 65647-00 Euroclad Part Numbers (Folded Standing Seam Roof) 51007-00 51007-00 Fixings: Euroclad Specific 50302-00 50302-00 51000-00 51001-00 51101-00 51007-00 Fixings: Split clamp 50300-00 Fixings: Split clamp 50301-00 65618-00 65664-00 65682-00 51110-00 Fixings: Split clamp (Euroclad only) 50302-00 Fixings: S5! Clamp 65647-00 The Latchways Product Selector is designed to help you select the correct products for Standing Seam roofs whether the manufacturer is known or not. For further information email spec@latchways.com. 7
Green Roof Warm Roof Roof Material PVC Bitumen TPO Other 65691-00 65692-00 65693-00 65694-00* Fixings 50 130 mm Insulation 65621-00 65621-00 65621-00 65621-00 130 220 mm Insulation 65624-00 65624-00 65624-00 65624-00 220 320 mm Insulation 65669-00 65669-00 65669-00 65669-00 Concrete Deck fixing kit 65628-00 65628-00 65628-00 65628-00 *A 65663-00 weathering cap is included with this to facilitate a waterproof fixing and ensure adequate weathering detail is achieved. 65691-00 65692-00 65693-00 65694-00 Fixings determined by insulation depth 50 130 mm insulation 65621-00 Fixings determined by insulation depth 130 220 mm insulation 65624-00 Fixings determined by insulation depth 220 320 mm insulation 65669-00 Concrete fixings 65628-00 The Latchways Product Selector is designed to help you select the correct products for green warm roofs whether the manufacturer is known or not. For further information email spec@latchways.com. 8
Green Roof Cold Roof Roof Material PVC Bitumen TPO Other 65691-00 65692-00 65693-00 65694-00* Fixings Fixings: non-concrete roofs (A sub-frame is available. A sub-frame negates the need to recess fixings positions to a cold roof deck whilst also providing the correct transition angle for the membrane weathering detail). Fixings: concrete roofs (A sub-frame is available. A sub-frame negates the need to recess fixings positions to a cold roof deck whilst also providing the correct transition angle for the membrane weathering detail). *A 65663-00 weathering cap is included with this to facilitate a waterproof fixing and ensure adequate weathering detail is achieved. 65691-00 65692-00 65693-00 65694-00 Concrete fixing 65628-00 65631-00 sub-frame The Latchways Product Selector is designed to help you select the correct products for green cold roofs whether the manufacturer is known or not. For further information email spec@latchways.com. 9
VersiRail Latchways guardrail system, VersiRail, is available in both freestanding and fixed options in three main upright styles; straight, curved and inclined. A variety of accessories allow for bends and terminations as well as toe boards and slopes. VersiRail can be installed onto roofs up to a maximum pitch of 10º. For more information please contact spec@latchways.com. Fixed Will the Versirail be fixed to the roof or freestanding? Freestanding Slab Is the fixing to a roof slab or parapet wall? Parapet wall Membrane Is the system on a membrane or metal profile roof? Metal profile There are three slab mounting plates available and a fixing collar to be used as part of the weathering detail see table on page 11. The height of the parapet will determine the height of the guardrail. Upright eights of 300 mm to 1200 mm are available to ensure the minimum height requirement is met. Three fixing options are available table on page 14. Before installation it is essential to check that the strength of the parapet is compatible with the loads generated by the fixed VersiRail system for details on this please refer to the table on page 11. NOTE BELOW* Is the system on a Sika roof or standard membrane roof? See table for part numbers. SEE Metal profile advisory note below* Sika Standard Specific part numbers are required for the uprights and a sole is supplied for the foot of the post to protect the membrane. Select from Sika range, page 13. Both a sole (see page 13) and sacrificial layer are required to protect the membrane. The sacrificial layer is not available from Latchways. Refer to the example layout on page 12 for details of weights, T junctions, bends, curves, wall end pieces and access gates. *Metal profile advisory notes: Latchways installers need to fabricate a mounting tray. A kickboard is required for standing seam profiles, contact spec@latchways.com. 10
Mounting Plate fixing loads at 1.5 m spacings Curved Upright Inclined Upright Straight Upright Parapet/Slab Mounting Bracket Wall Mounting Bracket Z-Type Mounting Bracket A B Parapet/Slab Mounting Bracket Installation Direction Wall Mounting Bracket (inc. open) Installation Direction Inside Parapet C Outside Parapet D (mm) Load (kn) Load (kn) Load (kn) A B (mm) A B (mm) A B 300 1.42 1.23 300 1.34 1.17 300 1.25 1.09 500 2.20 1.92 500 2.16 1.89 500 1.99 1.74 700 3.00 2.61 700 3.01 2.62 700 2.73 2.38 900 3.79 3.30 900 3.86 3.37 900 3.47 3.02 1000 4.18 3.65 1000 4.29 3.73 1000 3.84 3.34 1100 4.58 3.99 1100 4.55 3.96 1100 4.20 3.66 (mm) Load (kn) Load (kn) Load (kn) C D (mm) C D (mm) C D 300 1.34 1.71 300 1.64 1.71 300 1.37 1.66 500 2.20 2.89 500 2.45 2.92 500 1.76 2.75 700 3.00 4.07 700 3.71 4.17 700 2.85 3.85 900 3.79 5.25 900 4.98 5.43 900 3.95 4.94 1000 4.18 5.83 1000 5.61 6.06 1000 4.50 5.49 1100 4.58 6.43 1100 6.00 6.47 1100 5.05 6.04 (mm) Load (kn) (mm) Load (kn) (mm) 300 4.59 300 4.17 300 3.53 500 6.31 500 6.12 500 4.01 700 8.21 700 8.28 700 5.97 900 10.20 900 10.49 900 7.92 1000 11.20 1000 11.60 1000 8.90 1100 12.22 1100 12.09 1100 9.68 Load (kn) 11
Freestanding VersiRail example layout plan 5 2500 mm* max. 6 1 Closure Bend 750 mm max. 1 9 8 7 2 Protective Sole (only applicable on membrane roof materials) 3 Additional Counterweight (for end posts) 3 4 Variable Corner Bracket 5 Wall End Piece 500 mm max. 2 10 6 Upright VersiRail post 7 Upright/Foot Bracket inge 8 Foot Bracket/Foot Bracket Tubes 9 Counterweight 500 mm max. 10 Junction Part 11 andrail 500 mm max. 1200 mm 12 Kneerail 13 Clamp 14 Corner Section 15 Access gate 4 500 mm max. 1500 mm max. 11 13 15 12 14 *The maximum distance between each upright is 2000 mm for straight folding uprights only. 12
Freestanding VersiRail for flat roofs (<10º) Roof Material Single Ply BUOS/Composite Secret Fix Standing Seam Folded Seam Freestanding VersiRail Variant Straight 22000-00 22000-00 22000-00 22000-00 22000-00 Inclined 22100-00 22100-00 22100-00 22100-00 22100-00 Curved 22200-00 22200-00 22200-00 22200-00 22200-00 Straight folding uprights 22001-00 22001-00 22001-00 22001-00 22001-00 Sika Roof Material PVC Liquid Plastics (TPE) TPO Freestanding VersiRail Sika Variant Straight 22510-00 22516-00 22513-00 Inclined 22512-00 22518-00 22515-00 Curved 22511-00 22517-00 22514-00 Straight folding uprights 22519-00 22521-00 22520-00 Counterweights 22080-00 22080-00 22080-00 22080-00 22080-00 22080-00 22080-00 Additional counterweights must be ordered for end posts. Up to 2 counterweights can be installed on each upright. Freestanding VersiRail Straight 22000-00 Freestanding VersiRail Inclined 22100-00 Freestanding VersiRail Curved 22200-00 Freestanding VersiRail Straight folding uprights 22001-00 Counterweights 22080-00 Sika PVC Sole* 22510-00 Sika Liquid Plastic Sole* 22516-00 Sika FPO Sole* 22513-00 Sika PVC Sole* 22511-00 Sika Liquid Plastic Sole* 22518-00 Sika FPO Sole* 22514-00 Sika PVC Sole* 22512-00 Sika Liquid Plastic Sole* 22517-00 Sika FPO Sole* 22515-00 Sika PVC Sole* 22519-00 Sika Liquid Plastic Sole* 22521-00 Sika FPO Sole* 22520-00 PVC Sole** (Black) 22088-00 TPO Sole** (Grey) 22089-00 PVC Sole** (Black) 22088-00 TPO Sole** (Grey) 22089-00 PVC Sole** (Black) 22088-00 TPO Sole** (Grey) 22089-00 PVC Sole** (Black) 22088-00 TPO Sole** (Grey) 22089-00 *When ordering Sika VersiRail, please quote these part numbers (PVC/Liquid Plastics/FPO variant). **Sacrificial layer is required for use. The Latchways Product Selector is designed to help you select the correct products for VersiRail flat roofs whether the manufacturer is known or not. For further information email spec@latchways.com. 13
Fixed VersiRail for flat roofs (<10º) Upright eights 300 mm 500 mm 700 mm 900 mm 1000 mm 1100 mm 1200 mm Fixed VersiRail Variant Straight 22020-00 22022-00 22024-00 22026-00 22027-00 22028-00 22032-00 Inclined 22120-00 22122-00 22124-00 22126-00 22127-00 22128-00 22132-00 Curved 22220-00 22222-00 22224-00 22226-00 22227-00 22228-00 22232-00 Parapet Mounting Plate 22044-00 22044-00 22044-00 22044-00 22044-00 22044-00 22044-00 Slab Mounting Plate determined by depth of roof construction Wall Mounting Plate Z Type Mounting Plate 200 mm 22040-00 22040-00 22040-00 22040-00 22040-00 22040-00 22040-00 250 mm 22041-00 22041-00 22041-00 22041-00 22041-00 22041-00 22041-00 300 mm 22050-00 22050-00 22050-00 22050-00 22050-00 22050-00 22050-00 Standard 22042-00 22042-00 22042-00 22042-00 22042-00 22042-00 22042-00 Open 22043-00 22043-00 22043-00 22043-00 22043-00 22043-00 22043-00 Standard 22047-00 22047-00 22047-00 22047-00 22047-00 22047-00 22047-00 2 fixings 22049-00 22049-00 22049-00 22049-00 22049-00 22049-00 22049-00 Fixed VersiRail Straight Upright eight 300 mm 22020-00 500 mm 22022-00 700 mm 22024-00 900 mm 22026-00 1000 mm 22027-00 1100 mm 22028-00 1200 mm 22032-00 eight (mm) 1200 1100 900 700 500 The above covers all roof types. Fixed VersiRail Inclined Upright eight 300 mm 22120-00 1200 500 mm 22122-00 700 mm 22124-00 1100 900 mm 22126-00 1000 mm 22127-00 900 1100 mm 22128-00 1200 mm 22132-00 700 eight (mm) 500 Fixed VersiRail Curved Upright eight 300 mm 22220-00 500 mm 22222-00 700 mm 22224-00 900 mm 22226-00 1000 mm 22227-00 1100 mm 22228-00 1200 mm 22232-00 eight (mm) 1200 1100 900 700 500 300 300 300 100 100 100 Parapet Mounting Plate 22044-00 Slab Mounting Plate 200 mm 22040-00 250 mm 22041-00 300 mm 22050-00 Wall Mounting Plate Z Mounting Plate Note: The standard VersiRail is polished. For a powder coated finish please contact Latchways. Standard 22042-00 Open 22043-00 Standard 22047-00 2 Fixings 22049-00 The Latchways Product Selector is designed to help you select the correct products for flat roofs whether the manufacturer is known or not. For further information email spec@latchways.com. 14
WalkSafe Latchways has developed a upvc walkway, WalkSafe, which fixes to all major roof types. This designates safe access routes on roofs, protecting the roof material and guiding workers away from hazards. WalkSafe is available in three colours with a tropical variation specifically for hot climates. The anti-slip profiles can be ordered in varying widths dependent on expected traffic flow and in longways/shortways configuration to provide a safe means of access on the roof. For roof pitches of 6 or more, a levelled walkway is recommended. For roof pitches of 10º or more, a stepped walkway is recommended as these items are made to order please contact Latchways at spec@latchways.com with your roof configuration. Membrane What is the roof type metal PROFILE or membrane? Metal Profile The system is self weighted and does not need any roof fixings (see table on page 16) Standing Seam Is the metal profile roof standing seam or BUOS/Composite? BUOS/ Composite Whether you have folded or bulb standing seam, there are specific part numbers for the fixing kits and WalkSafe panels (see chart on page 16) There are specific part numbers for the fixing kits and WalkSafe panels (see chart on page 16) 15
WalkSafe WalkSafe Single Ply BUOS/Composite Secret Fix Standing Seam Folded Seam Longways Panels 66006-00 66005-00 66005-00 66002-00 66018-00 Self-weighted 66107-00 66111-00 66102-00 66129-00 Shortways Panels 66001-00 66001-00 66001-00 66017-00 66106-00 66110-00 66101-00 66130-00 WalkSafe Longways Panels Single Ply 66006-00 Self-weighted WalkSafe Longways Panels BUOS/Composite 66005-00 66107-00 WalkSafe Longways Panels Secret Fix 66005-00 65111-00 WalkSafe Longways Panels Standing Seam 66002-00 66102-00 WalkSafe Longways Panels Folded Seam 66002-00 66129-00 WalkSafe Shortways Panels BUOS/Composite 66001-00 66106-00 WalkSafe Shortways Panels Secret Fix 66001-00 66110-00 WalkSafe Shortways Panels Standing Seam 66001-00 66101-00 WalkSafe Shortways Panels Folded Seam 66017-00 66130-00 Please add the desired colour code to your part number: W = White, BR = Brown, SL = Silver. The Latchways Product Selector is designed to help you select the correct products for your roof(s). For further information email spec@latchways.com. 16
Ancillary Rooftop Products WalkSafe Rooflight Covers WalkSafe Fall-Proof Covers WalkSafe Valley Gutter Walkways Freestanding Constant Force Post 3 m Full Valley Panel 66014-00 3 m x 1 m 66307-00W 3 m x 2 m 66016-00 200 kg* 65643-00 1 m x 1 m 66308-00W 2 m x 1 m 66309-00W s: WalkSafe Rooflight Covers can be fixed using the standard WalkSafe fixing kits (depending on roof type) see page 15. s: WalkSafe Fall-Proof Covers are available in one standard size and again can be fixed using the standard WalkSafe fixing kits (depending on roof type) see page 15. 3 m alf Valley Panel* 66015-00 300 kg 65640-00 400 kg 65644-00 100 kg Upgrade Kit** 65641-00 *A 200 kg post of only suitable for use as an intermediate. **This can be used to upgrade a 300 kg to a 400 kg unit. Illustration above shows a 300 kg post. 3 m alf Valley Leg Support** 66305-00 *Where the panel is fixed directly to the wall. **Where a supporting leg is used for fixing. 17
ManSafe, Constant Force, VersiRail and WalkSafe are registered trademarks of Latchways plc. Latchways plc, opton Park, Devizes, Wiltshire, SN10 2JP, England Tel: +44 (0)1380 732700 Fax: +44 (0)1380 732701 Email: info@latchways.com Website: www.latchways.com