Aluminium Catalogue 1. Aluminium and Aluminium Alloy Sheets&Plates for Common Civil/Industrial Application 1) Non-heattreatment aluminium alloy Sheets&Plates Alloy: 1***,3***,8*** series; Temper: O,F,H111,H112,H12,H14,H16,H18,H19, H22,H24,H26; Thickness(mm):0.2-150; Width(mm):500-2400; Length(mm):500-10000 Standard available: YS/T91 GB/T3880-2006 JIS4000 ENAW ASTM B209(M) Alloy: 5***, series; Temper: O,F,H111,H112,H12,H14,H16,H18,H19,H32,H34,H36,H38,H321; Thickness(mm): 0.2-150; Width(mm):500-2400; Length(mm):500-10000 Standard available: YS/T91 GB/T3880-2006 GJB1541 GJB2662 ASTM B209(M) Marine sheets: 5083/5086 H111/112/116/321 Standard: ASTM B928 2) Normal heat treatment reinforced plate & sheet: Alloy: 2***,6***,7*** series; Temper: O,F,H111,H112,T3,T4,T6,T7;etc. Thickness(mm): 0.5-200; Width(mm): 1000-2500; Length(mm): 2000-10000 Standard available: GB/T3880 GJB1541 GJB2662 ASTM B209(M) Pre-stretched Sheets/Plates, after inner stress relieved Alloy: 2***,6***,7*** series; Temper: T351, T451, T651, T851; Thickness(mm): 0.5-200; Width(mm): 1000-2500; Length(mm): 2000-10000 Standard available: GJB1741 ASTM B209(M) 3) Tread sheets/embossed sheets/ Corrugated sheets Tread sheets (GB/T3618-2006) Alloy: 1***,3***,5*** series; Temper: O, H114, H194, H234, T4(2A11, 2A12), O Thickness(mm): Bottom thick 1.0~8.0; Width(mm): 1000-1600; Length(mm): 2000-10000 1
Embossed sheets (YS/T490-2005) Alloy: 1***,3***,5*** series; Temper: H14, H24, H22 Thickness(mm): Bottom thick 0.20-1.50; Width(mm): 500-1500; Length(mm): 1000-4000 Corrugated sheets (GB/T4438-2006) Alloy: 1***,3*** series; Temper: H18 Bottom thick(mm) 0.60-1.00 Length(mm): 2000-10000 Width(mm): 1008-1115; Wave height(mm): 20-33; Wave distance(mm): 106-131 4) Coating/Curtain/Ceiling/Aluminium-Plastic Composition/sheet: Alloy: 1***,3*** series & 5005,5052; Temper: O, H14, H24; Thickness(mm): 1.5-4.0; Width(mm): 914-2200; Length(mm): 1500-5500 Standard available: YS/T429.1 YS/T429.2 ASTM B209(M) 5) Aluminium alloy composited sheet for brazing Alloy: Q111-Q737 ; Temper: O, H24; Thickness(mm): 0.21-4.0; Width(mm): 900-1600; Length(mm): 2000-7000 Standard available: YS/T69-2005 6) Aluminium Circle /wafer for civil pan/pot/kettle etc. Alloy: 1100, 1200, 1050, 1060,1070,3003 etc. Thcikness(mm): 0.1-6.0; Diameter(mm): 50-1500 Standard available: GB/T3880 3196 Package: Wooden tray/batten/paper lamination/pvc protection etc. 2. Aluminium and Aluminium Alloy Coils/Strips/Belts for Common Civil/Industrial Application 2
1) Roll-casting strip: Alloy 1*, 3*, 5*, 8* series; Thickness(mm) 5.0~10.0 Width(mm) 500~2200 Inner diameter(mm) 505,606 Standard available: YS/T90-2008 2) Cold/Hot rolled coil: Alloy1*, 3*, 5*, 8* series; Thickness(mm) 0.20~7.0; Width(mm) 900~2200; Adopted standard GB/T3880-2006; ASTM B209(M) JIS-4000 3) Stock for micron foil: Alloy 1235;1145;1100;1200;8011;8011A;8079 Temper H14, H16, H18 Thickness(mm) 0.25~0.70; Width(mm) 400~2000 Standard available YS/T 457-2003 4) Coating sheet: Alloy1*, 3* and 5* series; Temper H14, 16, 18, 22, 24, 26; Thickness(mm) 0.18~0.75; Width(mm) 1200~1550; Coating material: PE and PVDF Standard available YS/T431-2000 5) Curtain coil: Alloy1100, 3003, Temper H12, 22, 24, 26; Alloy5005, 5052; TemperH22, 24, 32, 34 Thickness(mm)1.5~3.0; Width(mm)1000-1500; Standard available YS/T429.1-2000 6) Lithographic coil and CTP panel: Alloy 1050,1052,1060,1070; Temper H16, H18; Thickness(mm)0.145-0.50; Width(mm)500-1600; Standard available YS/T421-2007 7) Strips for heat exchange, decoration: Alloy 3003/3105/5005/5052; Temper H14 H18 H19 Thickness(mm): 0.20-1.0 Width 30-300 Standard available: YS/T496-2005 8) Can stock: Alloy3104; Temper H19; Thickness(mm)0.28-0.31; Width(mm)1000-1550; Can end stock: Alloy 5052, 5182; Temper H19 Thickness(mm)0.2~0.3; Width(mm) 100~1500 Standard 3
available YS/T435 9) Ceiling stock: Alloy 1*, 3*series; Temper H14, 16, 24, 26; Alloy 5005, 5052 Temper H22, 24 Thickness(mm) 0.4-1.0; Width(mm)200-1450; Standard available YS/T429.2-2000 10) Bottle lids stock: Alloy8011; Temper H16, 18; Thickness(mm)0.20-0.30; Width(mm)500-1550; Standard available YS/T91 11) Strip/Coil for Al-Plastic Composite Panel: Alloy1100, 3003; Temper H14,H16,H18; Thickness(mm) 0.2-1.0; Width(mm)1000-1580; Standard available YS/T432-2000 Package: eye to wall/eye to sky/wooden tray/steel belt etc. 3. Aluminium and Aluminium Alloy Foil for Common Civil/Industrial Application 1) Appliance foil: Alloy 8011, 8111; Temper O; Thickness(mm) 0.01~0.02; Width(mm) 200~700; Inner Diameter(mm): 76.2, 152.4; Max O. D(mm) 450; Standard available: GB3198 2) Cable foil; Alloy 1050, 1145; Temper O; Thickness(mm)0.1~0.2; Width(mm) 200~600 Inner Diameter(mm): 76.2; Max O. D(mm)800; Standard available: GB3198 3) Pharmacy foil; Alloy1235, 8011, 8111; Temper H18, H19; Thickness(mm) 0.018~0.022 Width(mm) 400~600; Inner Diameter(mm): 76.2; Max O. D(mm)600 Standard available: GB3198 4 ) Air-conditioner foil; Alloy1100, 8011, 3102; TemperH22, H24, H26, H19 Thickness(mm)0.07~0.20; Width(mm) 400~1310; Inner Diameter(mm): 150, 200, 505 Max O. D(mm)1450; Standard available: YS/T95.1 5) Cigarette foil; Alloy1235; Temper O; Thickness(mm)0.006~0.007; Width(mm) 460~1320 Inner Diameter(mm): 76.2; Max O. D(mm)400; 4
Standard available: GB3198 6) Further fabricating foil; Alloy8011; Temper O, H22, H24, H26, H18 Thickness(mm)0.012~0.06; Width(mm) 300~1300; Inner Diameter(mm): 76.2 Max O. D(mm)1300; Standard available: GB3198 7) Electronic foil; Alloy 1A99, 1A97, 3003, 3001; Temper H19 Thickness(mm) 0.09~0.15; 0.02~0.05; Width(mm) 500~1000 Inner Diameter(mm): 76.2; Max O. D(mm) 1450; Standard available: GB/T3615 8) Lithographic foil: Alloy 1050; Temper H18; Thickness(mm) 0.14~0.15 Width(mm) 600~1470; Inner Diameter(mm): 150, 200; Max O. D(mm) 1200 Standard available: HG/T2619 9) Decoration foil: Alloy 1100, 3003; Temper H18; Thickness(mm) 0.026~0.15 Width(mm) 1240~1400; Inner Diameter(mm): 150, 200 Max O. D(mm) 1200; Standard available: GB3198 Package: eye to wall/eye to sky/wooden tray/steel belt /hang in air, etc. 4. Aluminium and Aluminium Alloy Tubes/Pipes for General Engineering and Special Application 1) Extruded Tubes (seamless and seam) Alloy: 2***, 4***, 6***, 7*** series; Temper: H112, O, F, T4, T6 Alloy: 1***, 3***, 5***, 7*** series; Temper: H112, O, F Wall Thickness (mm): 0.5-40; Outer Diamater(mm): 5-180 Standard available: GB/T4437-2000 ASTM B221(M) 2) Cold drawn (rolled) seamless tubes Alloy: 1*** series; Temper: O, H14, Alloy: 2*** series; Temper: O, T4 Alloy: 3*** series; Temper: O, H14 Alloy: 5*** series; Temper: O, H14, H32, H34 Alloy: 6*** series; Temper: O, T4, T6 Wall Thickness (mm): 0.63-5; Outer Diamater(mm): 6-130 Standard available: GB/T6893-2000 ASTM 5
B234(M) Package: Wooden crates/steel fix/naked etc. 5. Aluminium and Aluminium Alloy Rods/Bars for General Engineering and Special Application 1) Extrusion rods and bars (round/square/rectangle/hexagon) Alloy: From 1*** to 7*** series; Temper: H112, F Alloy: 1***, 3***, 5***, 8*** series Temper: O Alloy: 2A11, 2A12, 2A13, 6061 Temper: T4 Alloy: 2***, 4***, 6***, 7*** series Temper: T6 Diameter (mm): 5-150 Standard available: GB/T3191-1998 2) Drawn rods and bars Alloy: From 1*** series; Temper: O, F, H18 Alloy: 2*** series; Temper: O, F, T4, T6, T351, T651 Alloy: 3***, 5*** Series; Temper: O, F, H14, H18 Alloy: 6061, 7075 Temper: O, F, T6, T651 Package: Wooden crates/steel fix/naked etc. 6. Aluminium (drawn round) Wire and Rod for Electrical Purpose Alloy: 1035,1350,1A50,1050A,1060A,1070A,1200 Temper: O, H12,H18, H14, Diameter(mm): 0.8~20 Standard available: GB/T3195-2008 Aluminium rod for electrical purpose: Material number: 1B97,1B95,1B93,1B90, 1A60,1R50,6101,6201 Type: B, B2,A,A2,A4,A6,A8 RE-A,RE-A2, C,D etc. Typical Diameter(mm) 7.5,9.5,12.0,15.0,19.0,24.0 Package: Naked/Wooden crates/steel belt etc. 7. Forging Item for special application aviation, navigation etc. Adopt standard: ASTM B247(M) 1) Hand forging Alloy 1***, 3*** and 5*** series, Temper O, F, H111, H112 Alloy 2***, 6*** and 7*** series, Temper T6, T4, T7452, T7352, T61, T73, O, F 6
Thickness(mm) 25-150 2) Die Forging 1) Alloy 5***, series, Temper O, F, H111 2) Alloy 2***, 6***, and 7***series, Temper T6, T4, T61, T652, T73, T7352, T7452, T852 O, F Thickness(mm) 50-200 3) Rolled Ring Forging Alloy: 2014,2018,2025,2218,2219,2618,6061,6066,6151,7049,7050,7075,7076,7175 Temper: T6, T4, T7452, T7352 etc. For all products above: 1, Chemical composition standard available: GB/T3190; ASTM; ENAW, JIS 2, Tolerance standard available: GB/T3880.3-2006; ANSI-H35.2; JIS-4000 etc. Ultrasonic Inspection standard: MIL-2154 A, AA AAA level available Declaration: Copyright MIRACHMETALLURGY CO.,LIMITED All Rights Reserved. Without the original author or copyright holder's permission, all the content above shall not be reproduced, modified or used in any form. Version: Autumn 2013 7