SAFETY DATA SHEET 1. Identification Product identifier Other means of identification Recommended use Inject into hard to turn or leaking valves. Recommended restrictions None known. Manufacturer/Importer/Supplier/Distributor information Manufacturer/Supplier Val-Tex Address 10600 Fallstone Road Houston,Texas 77099 Phone number 281-530-4848 E-mail help@valtex.com 2. Hazard(s) identification Physical hazards Health hazards Environmental hazards Label elements Hazard symbol Signal word Hazard statement Precautionary statements Prevention Response Storage Disposal Other hazards Supplemental information The mixture does not meet the criteria for classification. Observe good industrial hygiene practices. Wash hands after handling. Store away from incompatible materials. Dispose of waste and residues in accordance with local authority requirements. None known. 3. Composition/information on ingredients Mixtures The components are not hazardous or are below required disclosure limits. 4. First-aid measures Inhalation Skin contact Eye contact Ingestion Most important symptoms/effects, acute and delayed Indication of immediate medical attention and special treatment needed General information 5. Fire-fighting measures Suitable extinguishing media Move to fresh air. Call a physician if symptoms develop or persist. Wash off with soap and water. Get medical attention if irritation develops and persists. Rinse with water. Get medical attention if irritation develops and persists. Rinse mouth. Get medical attention if symptoms occur. Treat symptomatically. Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2). 932410 Version #: 01 Revision date: - Issue date: 01-December-2017 1 / 5
Unsuitable extinguishing media Specific hazards arising from the chemical Special protective equipment and precautions for firefighters Fire fighting equipment/instructions Specific methods General fire hazards 6. Accidental release measures Personal precautions, protective equipment and emergency procedures Methods and materials for containment and cleaning up Environmental precautions 7. Handling and storage Precautions for safe handling Conditions for safe storage, including any incompatibilities Do not use water jet as an extinguisher, as this will spread the fire. During fire, gases hazardous to health may be formed. Self-contained breathing apparatus and full protective clothing must be worn in case of fire. Move containers from fire area if you can do so without risk. Do not point solid water stream directly into burning oil to avoid spreading. Water may be ineffective in fighting an oil fire unless used by experienced firefighters. Use standard firefighting procedures and consider the hazards of other involved materials. Will burn if involved in a fire. 8. Exposure controls/personal protection Occupational exposure limits Biological limit values Exposure guidelines Appropriate engineering controls Keep unnecessary personnel away. Wear appropriate protective equipment and clothing during clean-up. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ensure adequate ventilation. Be aware of potential for surfaces to become slippery. Local authorities should be advised if significant spillages cannot be contained. For personal protection, see section 8 of the SDS. Large Spills: Dike the spilled material, where this is possible. Absorb spillage with non-combustible, absorbent material. Shovel the material into waste container. Clean contaminated area with oil-removing material. Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination. Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS. Avoid discharge into drains, water courses or onto the ground. Avoid contact with eyes. Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Store in original tightly closed container. Store away from incompatible materials (see section 10 of the SDS). No exposure limits noted for ingredient(s). No biological exposure limits noted for the ingredient(s). Occupational Exposure Limits are not relevant to the current physical form of the product. Use good industrial hygiene practice and general ventilation. Provide easy access to water supply and eye wash facilities. Individual protection measures, such as personal protective equipment If contact is likely, safety glasses with side shields are recommended. Eye/face protection Skin protection Hand protection Other Respiratory protection Thermal hazards General hygiene considerations 9. Physical and chemical properties Appearance Odour Physical state Form Colour Odour threshold Not normally needed. For prolonged or repeated skin contact use suitable protective gloves. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. Wear appropriate thermal protective clothing, when necessary. Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. Liquid. Liquid. Clear amber. Slight castor oil smell. 932410 Version #: 01 Revision date: - Issue date: 01-December-2017 2 / 5
ph Melting point/freezing point Initial boiling point and boiling range Flash point Evaporation rate Flammability (solid, gas) 290.6 C (555.0 F) Cleveland open cup Upper/lower flammability or explosive limits Flammability limit - lower Flammability limit - upper Explosive limit - lower ( %) Explosive limit upper Vapour pressure Vapour density Relative density 0.975 (H2O = 1) Solubility(ies) Solubility (water) Partition coefficient (n-octanol/water) Auto-ignition temperature Decomposition temperature Viscosity Other information Explosive properties Oxidising properties 10. Stability and reactivity Reactivity Chemical stability Possibility of hazardous reactions Conditions to avoid Incompatible materials Hazardous decomposition products 11. Toxicological information Insoluble in water. Not explosive. Not oxidising. The product is stable and non-reactive under normal conditions of use, storage and transport. Material is stable under normal conditions. No dangerous reaction known under conditions of normal use. Contact with incompatible materials. Strong oxidising agents. Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapours. Information on likely routes of exposure Inhalation No adverse effects due to inhalation are expected. Skin contact Eye contact Ingestion Symptoms related to the physical, chemical and toxicological characteristics Information on toxicological effects Acute toxicity Skin corrosion/irritation Serious eye damage/eye irritation Prolonged skin contact may cause temporary irritation. May cause discomfort if swallowed. However, ingestion is not likely to be a primary route of occupational exposure. Not expected to be acutely toxic. Prolonged skin contact may cause temporary irritation. 932410 Version #: 01 Revision date: - Issue date: 01-December-2017 3 / 5
Respiratory or skin sensitisation Respiratory sensitisation Not a respiratory sensitiser. Skin sensitisation Germ cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity - single exposure Specific target organ toxicity - repeated exposure Aspiration hazard Further information 12. Ecological information Ecotoxicity Persistence and degradability Bioaccumulative potential Mobility in soil Other adverse effects 13. Disposal considerations Disposal instructions Local disposal regulations Hazardous waste code Waste from residues / unused products Contaminated packaging 14. Transport information TDG IATA IMDG Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code 15. Regulatory information Canadian regulations This product is not expected to cause skin sensitisation. No data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic. Not classifiable as to carcinogenicity to humans. This product is not expected to cause reproductive or developmental effects. Not an aspiration hazard. None known. The product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment. No data is available on the degradability of this product. No data available. The product is insoluble in water. Expected to have low mobility in soil. No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component. Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Dispose of contents/container in accordance with local/regional/national/international regulations. Dispose in accordance with all applicable regulations. The waste code should be assigned in discussion between the user, the producer and the waste disposal company. Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions). Since emptied containers may retain product residue, follow label warnings even after container is emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal. Controlled Drugs and Substances Act Not regulated. Export Control List (CEPA 1999, Schedule 3) Not listed. Greenhouse Gases Not listed. Precursor Control Regulations Not regulated. This product has been classified in accordance with the hazard criteria of the HPR and the SDS contains all the information required by the HPR. 932410 Version #: 01 Revision date: - Issue date: 01-December-2017 4 / 5
International regulations Stockholm Convention Rotterdam Convention Kyoto Protocol Montreal Protocol Basel Convention International Inventories Country(s) or region Inventory name On inventory (yes/no)* Australia Australian Inventory of Chemical Substances (AICS) Canada Canada China Europe Europe Japan Korea New Zealand Philippines Taiwan United States & Puerto Rico Domestic Substances List (DSL) Non-Domestic Substances List (NDSL) Inventory of Existing Chemical Substances in China (IECSC) European Inventory of Existing Commercial Chemical Substances (EINECS) European List of Notified Chemical Substances (ELINCS) Inventory of Existing and New Chemical Substances (ENCS) Existing Chemicals List (ECL) New Zealand Inventory Philippine Inventory of Chemicals and Chemical Substances (PICCS) Taiwan Chemical Substance Inventory (TCSI) *A "" indicates this product complies with the inventory requirements administered by the governing country(s). A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing country(s). 16. Other information Issue date Revision date Version No. 01 Disclaimer Toxic Substances Control Act (TSCA) Inventory 01-December-2017 - KMG Val-Tex cannot anticipate all conditions under which this information and its product, or the products of other manufacturers in combination with its product, may be used. It is the user s responsibility to ensure safe conditions for handling, storage and disposal of the product, and to assume liability for loss, injury, damage or expense due to improper use. The information in the sheet was written based on the best knowledge and experience currently available. No No 932410 Version #: 01 Revision date: - Issue date: 01-December-2017 5 / 5