production is more delicate than most other seed and needs care and attention from planting of the seed crop through harvesting, drying, shelling and seed preparation. Growing peanuts for seed is a specialist activity because high quality seed is essential to ensure optimum plant populations. The industry requires quality seed with high germination rates, vigour and purity. Peanut germination and vigour can be affected any time through the growing season. Particular attention must be paid to crop nutrition, management of weeds and diseases, minimising moisture stress and correct harvesting and drying techniques. Clean land Land must be free from weeds and volunteer peanuts. Preferred paddocks have not grown peanuts for three years or longer and do not have a history of soil-borne diseases. Contamination of seed crops from peanut volunteers of a different variety is a major concern. Good rotations are needed to achieve clean land status. Preferred rotations include pastures, sugarcane and grain crops such as maize, sorghum, wheat and barley.
must be kept separate from all other peanuts. All handling equipment should be cleaned to avoid contamination. All machinery must be free of kernels and pods. This includes planters, diggers, threshers, elevators, drying bins, silos and trucks. can ensure good yields and dramatically improve seed quality. Peanuts, especially seed crops, have a high requirement for. Low seed results in poor germination. can be applied as lime or gypsum and, in combination with irrigation, can make a big difference to germination (Table 1). Lime is preferred if the soils are acidic. Ideally the lime should be applied and lightly incorporated before planting. Rates are usually 2.5 to 3.5 t/ha. Gypsum is the preferred option for applying as it is more soluble and more available than lime. Gypsum is best applied close to flowering at 1 t/ha over the whole crop or banded over the row at 400 to 600 kg/ha. Lime can also be applied over the row where the soils are acidic, but it must be applied soon after emergence. See the Crop nutrition section for more information.
Table 1. Influence of gypsum and irrigation on peanut seed germination Gypsum Germination Nil 850 kg/ha No 64% Yes 80% No 90% Yes 92% Source: Six steps to high quality peanut seed. North Carolina Agricultural Extension Service. Check crops regularly as harvest nears. The hull scrape method will help to determine the best time to dig. Slightly immature kernels give better physical quality than overmature ones. Diggers which invert peanuts are preferred for seed crops as inverted peanuts dry uniformly and fast. Threshing is one of the most critical aspects of seed production. The impact received during improper may damage peanuts making them unsuitable for seed. Mechanical injury causes broken or bruised seed tissue. Such damage leads to seed deterioration in storage, increasing the chance of fungal invasion of the seed.
One of the causes of the J-shaped root system that can develop when peanuts are trying to establish has been traced back to physical damage to the seed. Plants with deformed root systems never yield as well as those with a normal root system. Slow cylinder speeds are essential. As conditions change throughout the day, the harvested crop should be checked for loose shell kernel and hull damage. Allow the peanut bush to dry sufficiently in the windrow before. Green bushes are tough and require aggressive action to separate the pods from the bush. Moisture content of 18 to 22 per cent is ideal as less damage occurs at higher moistures (Table 2). Table 2. The effect of seed moisture at on germination Threshing moisture (%) Average germination (%) < 20 89 20-25 84 > 26 75 Source: Six steps to high quality peanut seed. North Carolina Agricultural Extension Service, USA.
Peanuts for seed should generally be pre-cleaned before drying. Seed can be easily damaged by over-drying, rapid drying and/or drying at overly high temperatures. damage can result in poor germination and poor shelling quality, with an increase in splits and skin slippage. Peanuts for seed should be dried at a maximum of 35 C and no more than 7 C above ambient air temperature. The minimum relative humidity for seed is 65 per cent compared with 50 per cent for commercial crops. Moisture should not be removed faster than 0.5% per hour. PCA has a program to produce seed peanuts. This aims to provide the industry with quality seed with high germination rate and varietal purity. Growers are contracted to produce this seed and must meet specific conditions including paddock and machinery clean-down inspections, application and preferably irrigation. Information contained in this publication is provided as general advice only. For application to specific circumstances, please seek professional advice. The Department of Primary Industries and Fisheries, Queensland has taken all reasonable steps to ensure the information in this publication is accurate at the time of publication. Readers should ensure that they make appropriate enquiries to determine
whether new information is available on the particular subject matter. The State of Queensland, Department of Primary Industries and Fisheries (2007). Address enquiries to copyright@dpi.qld.gov.au or phone 61 7 3404 6999.