Page 29 SPECIALTY TAPE DIVISION 250 Chester Street Painesville, OH 44077-4129 (866) GO AVERY (440) 639-2600 www.stus.averydennison.com TENSILE ADHESION THICKNESS ELONGATION FL 1000 Single coated 2.0 mil foil with 2.2 mils Designed for die-cut shapes, shielding, NA 88 6.7 NA of an acrylic adhesive protected by a moisture and vapor barrier sealing 40# densified kraft components or lamination to insulation materials that require environmental resistance. FL 1002 Single coated 2 mil foil with 2.0 mils Designed for taping joints and seams NA 182 6.5 NA of a rubber-based adhesive protected against moisture and vapor on foil jacketing by a 40# densified kraft facings. FL 1003 Single coated 1.5 mil foil with 1.5 mils Designed for die-cut shapes, shielding, NA 120 5.5 NA of a rubber-based adhesive protected moisture and vapor barrier sealing by a 40# densified kraft components or lamination to insulation materials. FM 2116 Double coated 1/16, 3# white foam Conformable construction designed for gap NA 106/106 71.2 NA with 2.3 mils of a rubber-based filling and cushioning applications. adhesive on both sides protected by a 60# densified kraft FM 2132 Double coated 1/32, 5# white foam Conformable construction designed for gap NA 112/112 39.2 NA with 2.3 mils of a rubber-based filling and cushioning applications. adhesive on both sides protected by a 60# densified kraft FM 2316 Double coated 1/16, 3# white foam Conformable construction designed for gap NA 123/130 70.8 NA with 2.1 mils of an acrylic adhesive filling and cushioning applications that on both sides protected by a 60# require environmental resistance. densified kraft FM 2333 Double coated 1/32, 5# white foam Conformable construction designed for gap NA 134/142 39.4 NA with 2.4 mils of an acrylic adhesive filling and cushioning applications that on both sides protected by a 60# require environmental resistance. densified kraft FM 2454 Double coated 1/32, 6# black foam Designed for bonding automotive mirrors to NA 107/107 37.2 NA with 1.8 mils of an acrylic adhesive mirror housings where good adhesion, heat on both sides protected by an 60# resistance, environmental resistance gap densified kraft filling and shatter resistance are important. FT 0411 Single coated 4 mils clear PP film A transparent protective film allows perfect NA 14 10.0 NA coated with 1.0 mil of a long term visual inspection. Designed as an application removable acrylic adhesive protected tape for emblem and badge mounting. The by a clay coated kraft transparent protective film allows for visual inspection. The tape can be cleanly removed from plastics, wood, painted steel and glass surfaces even after long term use. FT 0720 DL-C Double-linered transfer tape with 1.3 Specially developed for buried graphic label NA 26 5.5 NA Clear mils of an acrylic adhesive protected applications. by a 50# densified kraft liner and a 1.0 mil PET FT 0720 DL-W Double-linered transfer tape with 1.1 Specially developed for buried graphic label NA 35 5.3 NA White mils of a white opaque acrylic applications. adhesive protected by a 50# densified kraft liner and a 1.0 mil PET 2012 PSTC Tape Products Directory 29
Page 30 PDFd : 34722A : even, SPECIALTY TAPE DIVISION (cont.) FT 0815 Single coated 5 mil foil with 1.2 mils Designed for moisture barrier and heat 40 128 9.7 NA of a rubber-based adhesive protected shield applications. by a 60# densified kraft FT 0816 Single coated 5.0 mil foil with 4.7 mils Designed for moisture barrier and heat 35 106 13.2 NA of an acrylic adhesive protected by a shield applications that require 60# densified kraft environmental resistance. FT 0900 B Black flock with 4.5 mils of an acrylic Designed for sound deadening and anti- NA 88 44.1 NA adhesive protected by an 84# squeak applications. polycoated FT 0900 B PET Black flock with 4.5 mils of an acrylic Designed for sound deadening and anti- NA 88 39.5 NA adhesive protected by a 2.0 mil PET squeak applications. The PET liner acts as a processing aid for improved die cutting. FT 1115 4.7 mil acrylic adhesive protected by Designed for polyurethane foam bonding NA 77 9.3 NA an 80# densified kraft applications and offers plasticizer resistance. FT 1123 3.0 mil acrylic adhesive protected by Designed for applications requiring an acrylic NA 125 7.6 NA an 80# densified kraft adhesive for laminating to polyurethane foams where high initial tack and adhesion are required. FT 1126 12PT 4.9 mil acrylic adhesive protected by Designed for applications requiring an acrylic NA 134 17.4 NA BD a 12 point board adhesive for laminating to polyurethane foams where high initial tack and adhesion are required. FT 1126 4.9 mil acrylic adhesive protected by Designed for applications requiring an acrylic NA 134 9.5 NA an 80# densified kraft adhesive for laminating to polyurethane foams where high initial tack and adhesion are required. FT 1143 3.1 mil acrylic adhesive protected by Designed for polyurethane foam bonding NA 69 7.7 NA an 80# densified kraft applications and offers plasticizer resistance. FT 1143 PET 3.1 mil acrylic adhesive protected by Designed for polyurethane foam bonding NA 69 5.1 NA an 2.0 mil PET applications and offers plasticizer resistance. FT 1149 4.5 mil acrylic adhesive protected by Designed for applications requiring high NA 149 11.1 NA Low VOC an 84# polycoated adhesion to low surface energy materials and bonding to foams and fabrics where low-fogging is required. Does not contain any of the 13 chemicals restricted by the Japanese Ministry of Health, Labor and Welfare. FT 1150 2.0 mil acrylic adhesive protected by Designed for the permanent mounting of foil, NA 61 6.6 NA an 80# densified kraft metal and plastic nameplates and decorative trim. FT 1158 5.2 mil acrylic adhesive protected by Designed for applications requiring an NA 146 9.8 NA an 80# densified kraft aggressive fiber-filled acrylic adhesive offering excellent die-cutting and slitting properties. FT 1159 2.2 mil high tack rubber-based Designed for applications requiring good NA 181 6.8 NA adhesive protected by an 80# quick stick and adhesion to low surface densified kraft energy substrates and foams. FT 1168 4.5 mil modified acrylic based Designed for applications requiring high NA 149 7.5 NA adhesive protected by a 3.0 mil PET. adhesion to low surface energy materials and bonding to foams and fabric where lowfogging is required. FT 165 1.2 mil synthetic rubber-based Designed for envelopes and continuous NA 74 3.4 NA adhesive protected by a 2.2 mil white forms. glassine 30 2012 PSTC Tape Products Directory
Page 31, SPECIALTY TAPE DIVISION (cont.) FT 1966 3.6 mil rubber adhesive protected by Ideal for bonding rubbers and sponge rubber NA 250 3.4 NA an 80# densified kraft where moderate temperature resistance is required. FT 1922 FR 1.8 mil modified acrylic based For applications requiring a flammability NA 104 6.4 NA adhesive protected by an 80# rating in industrial applications. General densified kraft bonding with high adhesions with high flammability resistance. FT 1925 FR 4.3 mil modified acrylic based For applications requiring a flammability NA 154 8.9 NA adhesive protected by an 80# rating in industrial applications. General densified kraft bonding with high adhesions with high flammability resistance. FT 3014 Double-linered transfer tape with 4.0 Designed for bonding open cell and non- NA 134 9.6 NA mils of a modified acrylic based woven materials where high tack and adhesive protected by a 60# adhesion are required in a double linered densified kraft liner and 2.0 mil PET construction. FT 3047 Double-linered transfer tape with 2.2 Designed for tamper evident graphical NA 56 8.6 NA mils of a modified acrylic adhesive applications whereby the adhesive is leaving protected by a 53# densified kraft a UV luminescent footprint. liner on both sides. FT 310 0.5 mil PET with 0.6 mils of a The removable adhesive can be removed 16 18/96 5.7 100 removable acrylic adhesive on the with no ghosting up to one year after unwind side and 1.75 mils of a application from most hard substrates. permanent adhesive on the liner side protected by a white glassine FT 4302 A self wound tape using a 2.0 mil Designed for applications requiring an acrylic NA 110 3.8 NA PET liner coated with 1.8 mils of a lamination to plastic and other low surface modified acrylic adhesive. energy substrates. FT 333 0.5 mil PET with 2.1 mils of an acrylic Designed to bond to polyurethane foams, 16 80/80 8.2 100 adhesive on both sides protected by sponge rubber, metal and plastic parts a 60# densified kraft where high adhesion is required. FT 445 1.0 mil PP with 2.3 mils of a rubber- Designed for applications requiring an 25 152/138 9.1 65 based adhesive on both sides aggressive, high shear adhesive for use on protected by a 60# densified kraft a wide variety of substrates FT 702P 0.5 mil PET with 2.0 mils of an acrylic Designed for bonding to high surface energy 16 74/61 9.9 100 adhesive on the unwind side and 2.9 plastics and metal substrates. mils of an acrylic adhesive on the liner side protected by a 63# polycoated FT 8217 0.3 oz non-woven with 3.2 mils of an Designed for use on applications that require NA 133/106 10.3 NA acrylic adhesive on the unwind side excellent adhesion to foam or low surface and 2.1 mils of an acrylic adhesive energy substrates along with good on the liner side protected by a 60# dimensional stability. densified kraft FT 8302 0.5 mil PET with 1.7 mils of a rubber- Economical general purpose product. Ideal 16 124/145 7.1 100 based adhesive on the unwind side for foam bonding. and 1.4 mils of a rubber-based by an 60# densified kraft FT 8305 0.5 mil PET with 1.2 mils of a rubber- Designed for applications requiring an 16 134/136 6.5 100 based adhesive on both sides aggressive, high shear adhesive for use on protected by a 60# densified kraft a wide variety of substrates. 2012 PSTC Tape Products Directory 31
Page 32 PDFd : 34722A : even, SPECIALTY TAPE DIVISION (cont.) FT 8306 0.5 mil PET with 2.1 mils of a Designed for use where temporary mounting 16 21/130 6.9 100 permanent rubber adhesive on the to substrates is desired. unwind side and 0.8 mils of a removable acrylic adhesive on the liner side protected by a 60# densified kraft FT 8311 0.5 mil PET with 1.8 mils of a high- Designed for a variety of applications 16 74/70 8.7 100 tack acrylic adhesive on the unwind requiring initial quick stick. Excellent for foam side and 1.8 mils of a high-tack bonding application and used in electronic acrylic adhesive on the liner side and packaging applications. protected by a 76# densified kraft FT 8311 12 PT 0.5 mil PET with 1.8 mils of a high- Designed for applications requiring good 16 128/70 16.6 100 BD tack acrylic adhesive on the unwind adhesion to high surface energy plastics and side and 1.8 mils of a high-tack polyurethane foams where resistance to acrylic adhesive on the liner side environmental exposure is required. protected by a 12 pt board FT 8312 1.0 mil PET with 2.1 mils of a rubber- Designed for applications requiring an 32 223/197 12.2 100 based adhesive on the unwind side aggressive, high shear adhesive for use on and 3.2 mils of a rubber-based a wide variety of substrates. by a 100# densified kraft FT 8327 0.5 mil PET with 2.0 mils of a rubber- Designed for bonding to a wide variety of 16 119/124 8.7 100 based adhesive on the unwind side polyurethane and polyethylene foams used and 1.6 mils of a rubber-based in gasketing, sealing and sound damping applications. by a 76# densified kraft liner FT 8327 12PT 0.5 mil PET with 2.0 mils of a rubber- Designed for bonding to a wide variety of 16 119/124 16.9 100 BD based adhesive on the unwind side polyurethane and polyethylene foams used and 1.6 mils of a rubber-based in gasketing, sealing and sound damping applications. by a 12 point board FT 8337 0.5 mil PET with 1.9 mils of a rubber- Designed to offer temporary removability on 16 43/114 7.8 100 based adhesive on the unwind side a wide variety of substrates. and 0.8 mils of a rubber-based by an 80# densified kraft FT 8345 0.5 mil PET with 2.4 mils of a rubber- Designed for applications requiring an 16 179/163 8.9 100 based adhesive on both sides aggressive, high shear adhesive for use on protected by a 60# densified kraft a wide variety of substrates FT 8346 0.5 mil PET with 2.4 mils of an acrylic Designed for use in applications requiring 16 120/125 9.3 100 adhesive on the unwind side and 1.8 lamination to polyurethane foams. mils of an acrylic adhesive on the liner side protected by an 80# densified kraft FT 8380 0.5 mil PET with 1.2 mils of a rubber- Designed for use on bonding point of 16 64 6.2 100 based adhesive on the unwind side purchase display information to shelving and 1.0 mils a of rubber-based materials. by a 60# densified kraft FT 8383 EZ 0.5 mil PET with 1.4 mils of a rubber- Designed for bonding a wide variety of NA 173/166 7.9 NA based adhesive on the unwind side polyester urethane, polyether urethane and and 1.4 mils a of rubber-based polyethylene foams used in gasketing, sealing and sound dampening applications. by a 80# densified kraft 32 2012 PSTC Tape Products Directory
Page 33, SPECIALTY TAPE DIVISION (cont.) FT 8392 0.5 mil PET with 1.3 mils of a high A tape designed with an acrylic adhesive 16 114/66 7.9 100 performance acrylic on the unwind suitable for polyurethane foam bonding and side and 1.5 mils of an aggressive a general purpose rubber adhesive for a rubber-based adhesive on the liner wide variety of substrates. side protected by an 80# densified kraft FT 8392 12 PT 0.5 mil PET with 1.3 mils of a high A tape designed with an acrylic adhesive 16 114/66 15.8 100 BD performance acrylic on the unwind suitable for polyurethane foam bonding and side and 1.5 mils of an aggressive a general purpose rubber adhesive for a rubber-based adhesive on the liner wide variety of substrates. side protected by a 12 point board FT 8397 0.5 mil PET with 1.2 mils of a high Economical tape designed for use in 16 101/109 6.3 100 tack acrylic adhesive on the unwind applications requiring lamination to side and 1.0 mils of a high tack polyurethane foams. acrylic adhesive on the liner side protected by a 60# densified kraft FT 8766 0.3 oz non-woven with 1.8 mils of a Designed for temporary bonding to rubber NA 222 7.5 NA rubber based adhesive on the unwind and sponge rubber materials. Excellent side and 1.8 mils of a rubber based quick adhesion when heat resistance is not required. by a 60# densified kraft FT 9325 PG 0.5 PET with 2.4 mils of a rubber- Designed with a finger lift edge for box 16 152/144 9.1 100 based adhesive on the unwind side closure applications. with 3.0 mils of a rubber-based by a 52# densified kraft FT A 0.5 mil PET with 2.0 mils of an acrylic Designed for bonding to high surface energy 16 70/70 8.0 100 adhesive on both sides protected by plastics, metal and foam substrates where a 60# densified kraft resistance to plasticizers is required. FT B 0.5 mil PET with 1.7 mils of a rubber- Designed to provide an economical product 16 142/139 8.3 100 based adhesive on the unwind side for general purpose bonding. and 1.5 mils of a rubber-based by an 80# densified kraft FT B EZ 0.5 mil PET with 1.7 mils of a rubber- Designed to provide an economical product 16 142/139 8.3 100 based adhesive on the unwind side for general purpose bonding with an ez and 1.5 mils of a rubber-based release. by an 80# densified kraft FT B 12 PT BD 0.5 mil PET with 1.7 mils of a rubber- Designed to provide an economical product 16 142/139 16.2 100 based adhesive on the unwind side for general purpose bonding. and 1.5 mils of a rubber-based by a 12 point board FT C 10# tissue with 1.8 mils of a rubber- Designed as a general purpose tissue tape NA 135/111 8.5 NA based adhesive on the unwind side providing high conformability and high and 1.6 mils of a rubber-based adhesion to a variety of surfaces. by a 60# densified kraft FT D 0.5 mil PET with 2.5 mils of a rubber- Designed for applications where high 16 260/227 9.0 100 based adhesive on both sides adhesion and tack are required on a variety protected by a 60# densified kraft of substrates. 2012 PSTC Tape Products Directory 33
Page 34 PDFd : 34722A : even, SPECIALTY TAPE DIVISION (cont.) FT E-8 0.5 mil PET with 1.4 mils of a rubber- Ideal for applications requiring initial 16 106/101 8.0 100 based adhesive on both sides lamination to polyurethane foams and protected by an 80# densified kraft temporary removability from a variety of substrates. FT EZ-8 0.5 mil PET with 1.5 mils of a rubber- Designed for applications requiring initial 16 110/101 8.1 100 based adhesive on both sides lamination to polyurethane foams and protected by an 80# densified kraft temporary removability from a variety of substrates. Offers easier liner removal than FT E-8. HPA 1902 2.5 mil acrylic adhesive protected by Designed for use on nameplates, membrane NA 71 6.8 NA an 58# natural polycoated kraft touch switch assemblies and graphic HPA 1902 PET 2.5 mil acrylic adhesive protected by Designed for use on nameplates, membrane NA 76 4.5 NA a 2.0 mil PET touch switch assemblies and graphic HPA 1905 5.0 mil acrylic adhesive protected by Designed for use on nameplates, membrane NA 87 9.3 NA an 58# natural polycoated kraft touch switch assemblies and graphic HPA 1905 PET 5.0 mil acrylic adhesive protected by Designed for use on nameplates, membrane NA 102 7.0 NA a 2.0 mil PET touch switch assemblies and graphic UHA 1185 HLP 4.6 mil ultra high adhesion adhesive Designed for applications requiring excellent NA 67 11.2 NA protected by an 84# polycoated high temperature performance. The adhesive offers excellent resistance to solvents such as gasoline, motor oil and anti-freeze. Provides excellent resistance to UV light exposure. UHA 1191 11.0 mil ultra high adhesion adhesive Designed for applications requiring high NA 216 15.6 NA energy substrates. This product provides excellent adhesion to textured materials. UHA 1192 2.0 mil ultra high adhesion adhesive Designed for applications requiring high NA 93 6.6 NA energy substrates. UHA 1195 5.0 mil ultra high adhesion adhesive Designed for applications requiring high NA 137 9.6 NA energy substrates. This product provides excellent adhesion to textured materials. UHA 1198 8.0 mil ultra high adhesion adhesive Designed for applications requiring high NA 159 12.6 NA energy substrates. This product provides excellent adhesion to textured materials. UHA 8250 0.3 oz. non-woven with 2.0 mils of an Excellent adhesion to open cell polyurethane NA 125 9.6 NA ultra high adhesion acrylic adhesive foams. Ideal for applications requiring on the unwind side and 2.0 mils of an temperature resistance and good ultra high adhesion rubber adhesive conformability. on the liner side protected by a 80# densified kraft 34 2012 PSTC Tape Products Directory
Page 35, SPECIALTY TAPE DIVISION (cont.) UHA 8272 10# tissue with 3.3 mils of an acrylic Excellent adhesion to open cell polyurethane NA 64/77 13.1 NA adhesive on the unwind side and 2.4 foams. Ideal for applications requiring mils of an ultra high adhesion acrylic temperature resistance and good conformability. by a 80# densified kraft UHA 8791 0.3 oz. non-woven with 2.9 mils of an Designed for bonding automotive trim NA 193/110 13.7 NA acrylic adhesive on the unwind side carpeting. and 5.2 mils of an ultra high adhesion rubber adhesive on the liner side protected by an 80# densified kraft XHA 6640 XHA 6640 is a 15 mil acrylic foam Designed for superior adhesion to common NA 192 19.7 NA tape with a 4.0 mil PE XHA 6660 XHA 6660 is a 24 mil acrylic foam Designed for superior adhesion to common NA 272 27.5 NA tape with a 4.0 mil PE XHA 6680 XHA 6680 is a 32 mil acrylic foam Designed for superior adhesion to common NA 320 35.5 NA tape with a 4.0 mil PE XHA 6620 XHA 6680 is a 47 mil acrylic foam Designed for superior adhesion to common NA 400 51.0 NA tape with a 4.0 mil PE 2012 PSTC Tape Products Directory 35