LOT NUMBER: DATE PURCHASED: / / Nexia 2-pk Gas Lift Barstool Stock # NEX2PGLBST-BE Black # NEX2PGLBST-RE Red ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our customer service number and have your instructions and parts list ready to provide the model name, part name or factory number: 1-866-942-5362 Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday Or visit our website www.whalenstyle.com Or e-mail your request to parts@whalenfurniture.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Whalen Furniture Manufacturing Page 1 Factory No. 15326 Date 2014-10-23 Rev. 1 Factory: ZHHALT
Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Seat (2) B- Pole with Footrest (2) C- Base (2) D- Gas Lift (2) (1) Ø1/4 x 3/4 Bolt 5 mm Allen Wrench (8+2 extra) (2) Tools required: Allen wench (provided). Whalen Furniture Manufacturing Page 2 Factory No. 14958
Assembly Instructions D C 1. Remove all the parts from carton and divide them into part groups as indicated in the parts list. 2. Pick up the Gas Lift (D) and insert the thick end into the center hole of Base (C). Remove the top cover from the Gas Lift for the following step. Whalen Furniture Manufacturing Page 3 Factory No. 14958
Assembly Instructions Ø1/4 x 3/4 Bolt (4 used in this step) 1 B 1 1 A 3. Position the Seat (A) upside down on a non-abrasive surface with the threaded inserts facing up. Align the top plate of the Pole with Footrest (B) with the threaded inserts on the Seat making sure the Footrest points towards the front of the Seat. Attach it in place using four 3/4 Bolts (1) and tighten with the enclosed Allen wrench. NOTE: Place a protective cover (like the bubble wrap packing material) over the carton to prevent from scratching the barstool material. Whalen Furniture Manufacturing Page 4 Factory No. 14958
Assembly Instructions A B D C 4. Slide the Pole with Footrest (B) onto the top of the Gas Lift (D) and press down until the stool locks in place. 5. Repeat the same process to assemble the other stool. Whalen Furniture Manufacturing Page 5 Factory No. 14958
INFORMATION FOR USE 1. This is one type of barstool for commercial or home use. Please use it only on smooth, even flooring. 2. The height of the seat can be raised up or down by adjusting the mechanism handle. 3. Please check that all bolts, screws and knobs are tight at least every 3 months or as needed. 4. If parts are missing, broken, damaged or wrong, please stop using this product until repairs are done by a trained person. 5. Only a trained person may replace or repair seat height adjustment component with energy accumulators. Do not stand or step on this stool. Do not use stool as a stepladder. Do not sit on the front edge of the stool. Use only for seating, one person at a time. Use over smooth, level, seamless surfaces only. Do not use this stool unless all bolts, screws and knobs are firmly secured. Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation. Use this stool for its intended purpose only. Use mild detergent only for cleaning. Failure to follow these warnings could result in serious injury. Maximum load weight 136 kg (300 pounds). THIS UNIT IS INTENDED FOR USE ONLY WITHIN THE MAXIMUM WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM WEIGHTS INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY. LIMITED WARRANTY We are confident that you will be delighted with your Whalen Furniture Purchase. Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture. To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization. At its option Whalen Furniture will: (a) Supply compatible components of current manufacture. (b) Repair the customer s component. The customer must prepay freight on any components returned to the factory. Return freight on components still in warranty will be paid by Whalen Furniture. This warranty gives you specific legal rights and you may also have other rights which vary from province to province (state to state). Customer Service: 1-866-942-5362 8:30 a.m. - 4:30 p.m., PST, Monday to Friday www.whalenstyle.com Whalen Furniture Manufacturing Page 6 Factory No. 14958
IF YOU NEED TO ORDER ANY REPLACEMENT PARTS, PLEASE USE THE LIST BELOW Nexia 2-pk Gas Lift Barstool A B D C *NEX2PGLBST-BE-A-S Seat *NEX2PGLBST-RE-A-S Seat *NEX2PGLBST-BE-B-PF Pole with Footrest *NEX2PGLBST-RE-B-PF Pole with Footrest *NEX2PGLBST-BE-C-B Base *NEX2PGLBST-RE-C-B Base *NEX2PGLBST-BE-D-GL Gas Lift *NEX2PGLBST-RE-D-GL Gas Lift *NEX2PGLBST-BE-E-PL Protective Liner (underneath the base) *NEX2PGLBST-RE-E-PL Protective Liner (underneath the base) *NEX2PGLBST-BE-1-3/4B Ø1/4" x 3/4" Bolt *NEX2PGLBST-RE-1-3/4B Ø1/4" x 3/4" Bolt *NEX2PGLBST-BE-2-M5AW 5 mm Allen Wrench *NEX2PGLBST-RE-2-M5AW 5 mm Allen Wrench *NEX2PGLBST-BE-CH Complete Hardware *NEX2PGLBST-RE-CH Complete Hardware