Optical High Speed Measuring System for Production CORE M
CORE M Innovation for Production Control CORE M is a measuring system developed to fulfill the increasing demand for 100% testing. Fast and efficiently it can be used right where manufacturing takes place in production. The optical high speed scanning system is ideally adapted to the rough conditions of a direct production environment. CORE M is characterized by temperature stability, dirt and vibration resistance. High dynamic linear drives and the robust base machine of the 6-axis-measuring-system allows measurements at high speed. Quick point acquisition is ensured by the innovative optical high intensity light sensor made by WENZEL ScanTec; on components difficult to access as well as on highly reflective surfaces; without time intensive repositioning of the part or pretreatment of surfaces. CORE M has a measurement volume of 500 mm x 500 mm x 1500 mm and is therefore ideal for the measurement of large components. The comprehensive software package from WEN- ZEL enables easy and fast evaluations even of complex parts like blades and blisk. With CORE you check your parts fast and efficient directly in production! 500 800 1500
Product Advantage CORE M The Highlights at a Glance CORE was developed to increase speed in production processes and offers a flexible 3D inspection solution for challenging measurement requirements of today s manufacturing industries worldwide. Fast and Efficient High dynamic linear drives Acceleration up to 10.00 mm/s 2 Movement speed up to 800 mm/s Fast point acquisition Surface independent Innovative optical sensor based on high intensity light technology Measurement of highly reflective and mirror-like surfaces No probe-radius-correction necessary Optimal accessibility on the part 6-axis-measurement-system 3 linear and 3 rotary axis Continuous swivel head Sensor with angle acceptance of 90 +- 85 to surface normal Easy Integration Standard 110V/230V electrical connection needed No compressed air
Automatable Automatic call up and start of measuring programs Integration of robots for automatic loading via TCP/IP interface Automatic compilation of correction parameter file for production Temperature Stable Stable for an enhanced temperature range (18 C 30 C) Precision scales on carbon fibre mounts Constant temperature housing Laser based CAA for movement and temperature dependent machine compensation in real time Dirt Resistant Protected guides Filters for ventilation Vibration Resistant Earthquake protected up to 6,5 on the Richter scale Large Measurement Volume in Compact Design Measuring volume 500 mm x 500 mm x 1500 mm Small footprint of 1,3 m x 3,5 m Measuring system height 2,5 m
Application Measurement of complex components with High Speed The success of CORE lies within the analysis of important components of engine and turbine manufacturing such as turbine blades and blisks. CORE can also be used for fast and accurate measurement of any part in direct production surroundings. Furthermore CORE is especially suitable for measurement of sensitive or flexible material as well as highly reflective surfaces. 2 3 1 Turbine Blade 2 Turbine Blade 3 Blisk 4 Common Rail 1 4
Software All Possibilities for Your Application For your application the perfect software solution! Whether CORE M is integrated as fully automated system to production for measurement of serial parts, or partially automated for measurement of different components, the software always fits the measuring task optimally. OpenDMIS For multiple parts; the approved measuring software OpenDMIS is ideal. The intuitive user interface and seamless CAD integration enable the quick creation of measuring programs. OpenDMIS supports DMIS standard as programming language and allows therefor easy exchange of measuring programs with other measuring systems. Win3DS Win3DS is the solution for fully automated system integration; ideal for the complete analysis of turbine blades. For measurements with Win3DS nominal and parameterized data can be used. A powerful library with more than 500 functions allows the easy evaluation of blade parameters to be completed, inclusive of different functions for alignment. I++ DME Server CORE is equipped with I++ DME Server. I++ DME is a multi-supplier interface between CMM and measuring software. This allows the independent purchase of CMM and measuring software. Standardized software within a company, even from different suppliers, can reduce the costs for training and increases the flexibility of the measuring system and user. Measuring programs can simply be exchanged between the different measuring systems.
We are there for you WENZEL worldwide WENZEL ScanTec GmbH is located in Greding in Bavaria, Germany, and was founded in 1989 under the name of Steintek. Steintek was one of the fi rst companies offering optical coordinate measuring machines. Since then WENZEL ScanTec has cooperated with many customers, especially in the aerospace and power generation sector, and has implemented optical technologies in the quality inspection departments. The high level of specialized skills and extensive experience in the fi eld of optical metrology led to the acquisition of Steintek GmbH by the WENZEL Group. The WENZEL Group GmbH & Co. KG is one of the leading manufacturers of metrology solutions. The wide range of WENZEL products includes solutions in the fi elds of coordinate measuring machines, gear metrology, computed tomography and high speed measuring and digitizing systems. The company has customers in many industries such as automotive and aerospace, mechanical engineering, as well as subcontractors operating in these sectors. Subsidiaries as well as sales and service partners worldwide represent the company in more than 50 countries. WENZEL Group employs around 630 people. CORE_M_GB_02_20AC08 WENZEL ScanTec GmbH Subject to technical modification and to changes in scope and design. Headquarters Subsidiary Service and Sales Partner WENZEL Group GmbH & Co. KG D-97859 Wiesthal Phone: +49 6020 201-0 Fax: +49 6020 201-1999 info@wenzel-group.com www.wenzel-group.com WENZEL ScanTec GmbH D-91171 Greding Phone: +49 8463 61 99 900 Fax: +49 8463 60 61 65 info@wenzel-scantec.com www.wenzel-scantec.com