The Declaration of Compliance (DoC) course focused on materials for packaging, storage and processing of food used in the U.S.

Similar documents
Isolator Technology Workshop Engineering - Validation - Operation

Workshop 242 TABLET COATING June 2018

Audit Trail Review / Data Integrity

Requirements for a GMP-compliant Data Life Cycle May 2016, Berlin, Germany. Karl-Heinz Menges Regierungspräsidium Darmstadt

please fill out here:

Computer Validation - Introduction to Risk Management - The GAMP 5 Approach

In cooperation with. Contract and Claims Management GmbH, Austria. present. International FIDIC Contracts Training Course

PRESSURE-SENSITIVE ADHESIVES

GMP for Medical Devices

Data Integrity. Requirements for a GMP-compliant Data Life Cycle SPEAKERS: May 2017, Budapest, Hungary LEARNING OBJECTIVES:

Computer Validation - Introduction to Risk Management - The GAMP 5 Approach

for Data Integrity Requirements for a GMP-compliant Data Life Cycle With an optional full-day pre-course session Audit Trail Review SPEAKERS:

Stability Testing for Pre-Clinical and Early Phase Clinical Drug Products

european cement research academy PROGRAMME 2018 Seminars

Invitation to Bluegiga Technical Training in Prague, Czech Republic

Sampling Strategies - Is the N rule always the Best?

P U B L I C T R A I N I N G

Improve your Quality Reviews

Focus Day Network and Dealer Inventory Management

How to Use Simplified Cost Options for ESI Funds? Implementation, Calculation Methods, Control and Audit

Setting Specifications and. Acceptance Criteria November 2015, Berlin, Germany ECA. Highlights:

Computer Validation: Maintaining Control of Operation

Mastering Intercultural Challenges and the TETA Seminar

Preventing migration. Nina Happonen, Metsä Board BCF Food Packaging Summit Managing the Migration Myth

Meeting Skills for European Supervisors

Lab Data Integrity. Meeting FDA & EU Concerns. Part 1: Establishing the Controls for Ensuring Laboratory Data Integrity

D.I.C.T - Data Integrity in Clinical Trials

OSHA 10-Hour AND OSHA 30-Hour General Industry Voluntary Compliance Courses

Statistical Design Space Development from Design of Experiment to granules Expert of Solids Certification Seminar March 11 to 12, 2014

Food Contact Materials gaps to be addressed the roadmap excercise

Copenhagen 27 February - 1 March 2017 MASTERCLASS WORKSHOP BILLS OF LADING

Public Procurement Requirements for ESI Funds

New USP & FDA Approaches for HPLC Ensuring HPLC Data Integrity

New USP & FDA Approaches for HPLC Ensuring HPLC Data Integrity

SPONSOR OPPORTUNITIES

HP Indigo for Food Flexible Packaging

HANSE ORGA TRAINING ACADEMY 2018

Regulatory developments in packaging, equipment & machinery

MEDICAL DEVICE DESIGN Implementing An Approach CONTROL I. Design control in both QSR and ISO 13485:2003 is complicated. Regardless of the complex

International User Convention LucaNet.World 24-25/11/2016 // Berlin

Understanding GxP (GMP, GCP & GLP) for FDA Regulated Industries

Quality Oversight. Supervision of the Pharmaceutical Quality System: Challenges and Opportunities. 26/27 April 2018, Barcelona, Spain.

Risk assessment techniques - Method-driven risk assessment - Dynamic assessment - Common user requirements

BANKS' BUSINESS MODEL ANALYSIS

Microbial Detection Methods and Their Limitations

3rd ENplus auditors training

Environmental Monitoring Deficiencies

Mold Contaminations-Prevention, Investigation, Remediation and Risk Assessment Durham, NC September 17 th & 18 th, 2018

Direct Marketing Metrics and Analysis

Workshop: PELLETS AND MICROPELLETS FOR ORAL MULTIPARTICULATE DOSAGE FORMS October 2017

ESSENTIAL HUMAN FACTORS FOR MEDICAL DEVICES

Altro Contractor Training School

Pharmaceutical Packaging Systems

Austria, 11 to 14 September 2017 ISWA. Study Tour & Practitioner Training Course. Framework and practice of successful Bio-Waste Management

GUIDANCE ON THE GMP CLEARANCE OF OVERSEAS MEDICINE MANUFACTURERS

Zwick Roell Forum for High-Temperature Testing 17th May 2018, Fürstenfeld, Austria. Intelligent Testing

Workshop Safeguarding and Enhancing Company Value by Leveraging Supply Risk Management (SRiM)

Amadeus Global Distribution System (GDS) CRS

BANKS' BUSINESS MODEL ANALYSIS

11th European GSE / IBM Technical University for z/vse, z/vm, KVM and Linux on IBM z Systems

Strategy for Investigating Microbial Contaminations

Becoming a HIGH FIVE Trainer APPLICATION AND CONTRACT

REGISTRATION FORM. The EMBO Meeting September 2013 in Amsterdam

AWA Asian Release Liner Industry Seminar 2015

Mastering European Regulation

5 Steps to a Seamless Installation

Filling and Packaging Validation for FDA Regulated Industries

Sponsorship packages

Electronic Components Basics


Workshop on Knowledge of Disciplinary and Enquiry Procedures & Employee Misconduct with Related Case Law 26-27, April 2013

The TETA Seminar. Changing perspective. Changing perspectives

Auditing Cleanroom Gown Suppliers

run by Lean Institute Turkey study mission japan 2016 november 5-13

Environmental Monitoring Requirements and Best Practices for Medical Devices and Drugs New AAMI and ISO EM Reference Documents and Standards

Bar Course Aptitude Test. Handbook 2015/16

GMP meets GCP Management, Supply and Quality Assurance of Clinical Trials

CHAMPS2 Business change management

SUPPLIER DATABASE FOR TSHWANE RAPID TRANSIT (PTY) LTD

Leachables & Extractables

Auditing Microbiology Media Suppliers

Using Public-Private Partnerships Effectively: The Challenges for New Public Financial Management Warsaw (PL), November 2007

EU Law for Non-Lawyers

Enquiries : or tel or fax

Century Extrusion presents. Twin-Screw Extrusion Seminar September 29-30, 2009 Seminar Leader: Adam Dreiblatt Akron Polymer Training Center Akron, OH

MEMBERSHIP APPLICATION FEE, ANNUAL SUBSCRIPTION FEES AND LEVIES (WITH EFFECT FROM 1 JANUARY 2017)

AWA Regional Market Study European Release Liner 2018

Labor Relations Certificate Programs

4-days Training Course

Good Microbiology Laboratory Practices

AAAA Management Seminar: Benefits-Based Pricing Solutions

FOR THE PROVISION OF EVENT ORGANIZATION SERVICES IN CROATIA

MAKING PROPERTIES AND PROFITS

Messphysik. Materials Testing. Zwick Roell Forum for High-Temperature Testing 31st May 2017, Fürstenfeld, Austria. Intelligent Testing

Behaviours and Influence Around the Boardroom Table

Medical Device Complaint Management

See how to use WUFI in conjunction with ASHRAE s New Standard 160, Design Criteria for Moisture Control in Buildings.

ASME Code, Section VIII, Division 1: DESIGN AND FABRICATION OF PRESSURE VESSELS Presenter: Fahim Shadid

Membership Category: Professional Senior Upgrade from to

Transcription:

Declaration of Compliance Materials in contact with food - U.S. and EU - How to generate a statement of confirmation to your customer? Dates and registration form see page 5

The Declaration of Compliance (DoC) course focused on materials for packaging, storage and processing of food used in the U.S. and the EU The content of the first 1.5 days training address the needs of professionals in the supply chain responsible for packaging development, quality assurance and risk assessment with respect to product safety on the US market. All components of packaging, i.e. plastics, coatings, adhesives and printing inks are considered. The second 1.5 days training addresses the needs with respect of materials and products on the EU market. Unternehmensberatung Dr. Kleinert UG Unternehmensber. Dr. Kleinert UG have the intension to transfer scientific knowledge into practice i.e. mathematical models validated and included into software should be used for replacing high costly labexperiments. The company runs training courses and workshops focused i.e. on simulation of exposure, migration, emission and declaration of compliance in support of product safety and technology development. Trainers expertise Dr. Walter Kleinert has more than 25 years of experience in the chemical industry starting from research to plant management and product safety of raw materials for high performance polymers and coatings. He was active in national and international bodies and industry associations. Based on his back-ground he is a recognised expert for product safety.

The programme Day 1: Declaration of Compliance - U.S. market 10:00 Coffee, Introduction 10:30 Requirements food contact materials in U.S. (1) FDA regulations (21 CFR) FCN programme 13:30 Requirements food contact materials in U.S. (2) Clearance options, exemptions Access online database (free ware) 15:30 How to generate a statement of confirmation to your customer for U.S.? (1) Exchange of information along the supply chain Marketing stages other than the retail stage Supporting documents 17:30 End of first day Dinner and get together Day 2: 9:00 How to generate a statement of confirmation to your customer for U.S.? (2) Case studies for plastics, adhesives, coatings and printing inks worst case assumptions and calculations 12:00 End of the U.S. course Day 2: Declaration of Compliance EU market 13:30 Coffee, Introduction 14:00 Plastic regulation (EU 10/2011) Application of requirements and rules Union list, food simulants Transitional provisions, Entry into force Access online database (free ware) 17:00 End of second day Day 3: 9:00 Declaration of compliance Rules for assessing compliance for plastics Expression of migration test results Assessment of substances not included in the Union list Supporting documents 13:30 How to generate a statement of confirmation to your customer? Case studies for adhesives, coatings and printing inks worst case assumptions and calculations 15:30 End of the EU course

Registration Registration possible until 10 days before the start. The number of participants is limited to the 10 computer workstations. Participation will be granted in chronological order. Pricing Participation fee per participant: U.S. course (1.5 days): 790,00 (plus legal VAT) EU course (1.5 days): 790,00 (plus legal VAT) Both courses (3 days): 1090,00 (plus legal VAT) Services Software training & documentation Each participant will have access to one computer workstation. Catering during the Software Training and Dinner (get together). Bus shuttle from Düsseldorf Airport to Velen. (One: Day 1 and second: return Day 3) Terms and Conditions The DoC course can be booked for FDA part, for EU part or for both. The number of participants is limited to 10. Travel costs and accommodation are not included. Accomodation in Velen SportSchloss Velen Schloßplatz 2, Tel. +49 / 2863 / 203-0 Fax. -788 E-Mail: info@sportschlossvelen.de Hotel Zum Tiergarten Rekener Straße 48-50, Tel. +49 / 2863 / 9299-0 Fax. -38 E-Mail: tiergarten@t-online.de Gasthof Coesfelder Tor Coesfelder Straße 34, Tel. +49 / 2863 / 4330 Fax. - 4744 E-Mail: coesfelder-tor@web.de Cancelling participation until 10 days before start date will cause a cancellation fee equal to 10% of the participation fee plus legal VAT. After this date, the full participation fee plus legal VAT will be charged. An alternative participant can be named. The DoC course may be cancelled due to insufficient number of participants or in case of other unforeseeable reasons. In case of cancellation, latest three days before the start, the full participation fee will be refunded. Booking of the next DoC course is possible. Further requirements cannot be claimed.

Registration form 2018 Declaration of Compliance (DoC)- course - Materials in contact with food - U.S. and EU Unternehmensber. Dr. Kleinert UG, Geeste 81, Please cross your date (either U.S. (1.5 days) or EU (1.5 days) or both, U.S. and EU (3 days)): Day 1+2: (U.S.) o 20.+21.02. o 20.+21.03. o 24.+25.04. o 12.+13.06. Day 2+3: (EU) o 21.+22.02. o 21.+22.03. o 25.+26.04. o 13.+14.06. 3 days: (U.S. & EU) Company / Institute: Street Country Organizer Unternehmensber. Dr. Kleinert UG Geeste 81 Germany + 49 / 2863 / 2996 + 49 / 170 / 4113264 walter.kleinert@mdctec.com Zip Code City Phone Fax Participant (Titel, First Name, Last Name) Trainer Dr. Walter Kleinert Location Training course Rekener Straße 27 Germany E-Mail Date, Signature + 49 / 2863 / 924 55 73