Technical Application Guide for UP-SHINE LED Downlight UP-DL11-6-25W
Introduction Up-shine IP65 waterproof LED Down light DL11 model adopts high lumen SMD LED, which makes light effect reach 9-1lm/w, PMMA diffuser with even light output. Lamp body IP65 rating designed, can be widely used in indoor and outdoor applications. White, silver, chrome surface are available for customer s preference. Up to 7% energy saving compared to standard CFL Long lifetime of 4, hours 9 wide beam angle Ø175-185mm cutout CCT: 3K 4K 5K 57K No UV/IR light Environment friendly, without Mercury or any other hazardous substances Application notes IP65 waterproof for indoor and outdoor use Professional electrician for installation only Switch off before installation Do not touch when in use Keep away from hot steam and corrosive gas Application Areas It is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc. Certificate
Product Information Ø195 172 Technical Specifications 46.5 Model Voltage Power Power Factor Lumen (±5%) Beam angle CCT Lifespan CRI Dimmable Dimension UP-DL11-6-25W AC23V 25W.9 23 9 3K 4h 8 No UP-DL11-6-25W AC23V 25W.9 245 9 4K 4h 8 No UP-DL11-6-25W AC23V 25W.9 25 9 5K 4h 8 No UP-DL11-6-25W AC23V 25W.9 255 9 57K 4h 8 No UP-DL11-6-25W-D AC23V 25W.9 217 9 3K 4h 8 Yes UP-DL11-6-25W-D AC23V 25W.9 237 9 4K 4h 8 Yes UP-DL11-6-25W-D AC23V 25W.9 24 9 5K 4h 8 Yes UP-DL11-6-25W-D AC23V 25W.9 245 9 57K 4h 8 Yes Driver data Sheet Fixture Compatibility Rated Wattage Driver data DIM Non dim Input rated Voltage AC23V AC23V Frequency 5Hz 5/6Hz Input Voltage AC2-24V AC2-24V Efficiency 85% 86% Total load Wattage 25W±5% 25W±5% Power Factor.9.9 Rated input current.14a.14a Full load output Voltage DC23-4V DC24-4V Rated output current 7mA 7mA Output current range 7mA±5% 7mA±5% Power tolerance ±5% ±5% Current output tolerance ±5% ±5% Dimming range 8%-1% Dimmer Triac dimmers Short circuit protection PASS PASS Over voltage protection PASS PASS Over temperature protection PASS PASS THD 18% 18% Withstand voltage AC375V AC375V Electrical Classification Ingress Protection Operating Temp Operating Humidity Storage Temp 25W Ⅱ IP65-2 o C~45 o C ~9% -2 o C~65 o C
Spectral Distribution 3K 4K.8 Max=814 [1.=2] 1.1 SDCM F3K.8 Max=8416 [1.=2] 1.23 SDCM F4K.7.7.6.6.5.4.3 x=.4388 y=.44.5.4.3 x=.3778 y=.3795.2.2.1.1. 38 5 6 7 8. 38 5 6 7 8 5K 57K.8 Max=9863 [1.=2] 2.44 SDCM F5K.8 Max=647 [1.=2] 5.93 SDCM F57K.7.7.6.6.5.4.3 x=.3493 y=.3661.5.4.3 x=.3292 y=.3467.2.2.1.1. 38 5 6 7 8. 38 5 6 7 8 Photometric Diagram 3K 4K Polar intensity diagram Cartesian intensity diagram Beam diagram Polar intensity diagram Cartesian intensity diagram Beam diagram Flux out: 1515 lm Flux out: 1738 lm -12-9 -/+18 12 9 1 9 8 MH=1m C/18 C9/27-12 -9 -/+18 12 9 15. 13.5 12. MH=1m C/18 C9/27 2 7 3 1.5 4 6 5 6 9. 7.5 6 4 9 6. 8 3 12 4.5-3 1 3 2 1-3 15 3 3. 1.5 AVERAGE BEAM ANGLE(5%): 97.8 DEG -25-2 -15-1 -5 5 1 15 2 25 Height Eavg, Emax Angle: 97.15deg Diameter AVERAGE BEAM ANGLE(5%): 97.4 DEG -25-2 -15-1 -5 5 1 15 2 25 Height Eavg, Emax Angle: 96.7deg Diameter 5K 57K Polar intensity diagram Cartesian intensity diagram Beam diagram Polar intensity diagram Cartesian intensity diagram Beam diagram Flux out: 1743 lm Flux out: 1791 lm -12-9 -/+18 12 9 15. 13.5 12. MH=1m C/18 C9/27-12 -9 -/+18 12 9 15. 13.5 12. MH=1m C/18 C9/27 3 1.5 3 1.5 6 9. 7.5 6 9. 7.5 9 6. 9 6. 12 4.5 12 4.5-3 15 3 3. 1.5-3 15 3 3. 1.5 AVERAGE BEAM ANGLE(5%): 98.1 DEG -25-2 -15-1 -5 5 1 15 2 25 Height Eavg, Emax Angle: 97.44deg Diameter AVERAGE BEAM ANGLE(5%): 97.7 DEG -25-2 -15-1 -5 5 1 15 2 25 Height Eavg, Emax Angle: 96.98deg Diameter
Polar Diagram Comparison -15 O -/+18 O 15 O -12 O 12 O -9 O 9 O -6 O 3 6 9 12 15 6 O -3 O 3 O O AVERAGE BEAM ANGLE (5%): 97.7DEG C/18, 97.7 deg C3/21, 97.7 deg C6/24, 97.6 deg C9/27, 97.6 deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decay Rate 9 11%.4 Lifetime (hours) 8 7 6 5 4 3 2 1 65 o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C) % Luminous Flux 15% 1% 95% 9% 85%.35.3.25.2.15 8% 75% FLUX.1.5 U'V' 7%. 1 2 3 4 5 6 7 8 9 1 LifeTime (hours) Temperature The testing is operated at 25 C The lifetime of capacitor, minimum of 5, hours if operated at 15 C, will be doubled whenever the temperature drops 1 C The highest withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C 8 Temperature ( o C) 7 6 5 4 3 2 1 18:37:46 19:7:44 19:37:44 2:7:44 2:37:44 21:7:44 21:37:44 22:7:44 23:7:44 23:37:44 :7:44 :37:44 1:7:44 1:37:44 2:7:44 2:37:44 3:7:44 3:37:44 4:7:44 4:37:44 5:7:44 5:37:44 6:7:44 6:37:44 7:7:44 7:37:44 8:7:44 8:37:44 9:7:44 Time The driver lifespan is based on capacitor working temperature. IC Capacitor MOS PCB LED Fitting Environmental temperature
Installation Install requirements A-gap above the fitting B-gap to the building material Power supply (C) 5mm (A) (B) C-gap to the thermal insulation 5mm 1. Open a hole according to the cutout size of led downlight. 2. Use screw-driver to open the driver terminal cover, feed the main AC wire L. N. in terminal block respectively, then fix the cover back. 3. Connect the downlight with driver, hold back the spring clip then push the downlight into the hole. 4. Make sure the downlight fixed tightly in ceiling, turn on the power (Fig 1). Packaging Information SIZE(CM) N.W/pc (KGS) G.W.(KGS) Q'TY(PCS) Carton 42*42*39.5.75 12.5 12 2'' standard container 4'' standard container CTNS Q'TY(PCS) VOLUME(CBM) 396 4752 28 792 954 56 Phone: +86 755 2919 7389 Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China