TCE 440x, TCE 443x and TCE 447x The next generation of professional tire changing

TCE 440x, TCE 443x and TCE 447x The next generation of professional tire changing

New range of tire changers from Bosch

Introduction Increasing demand from customers is putting ever greater time pressure on workshops to get the job done quickly. The new range of tyre changing equipment from Bosch has been specifically designed to provide technicians with a safe, versatile and importantly time-saving operation, with models that suit every type of workshop. New TSL 230 side lift A new tire lift with seamless integration with the revolutionary Ergo Control. It's fast and simple to use and ensures an ergonomic working position with less stress on your back. It's positioned on the right side of the tire changer which saves you time and increases your productivity. Technical data Integrated roller board Max wheel weight: 80 kg It's compatible with all new Bosch tire changers Air supply pressure: 8-10 bar. Dimensions 566 x 710 x 809 mm

TCE 4400 / TCE 4400-22 Well equipped for the standard tire market TCE 4400 TCE 4400-22 S44 TCE 4400/4405 and TCE 4400-22/4405-22 are pneumatic tilting back pole passenger car tire changers. TCE 4400 is equipped with a 20" (external clamping) round turntable single speed while TCE 4400-22 is equipped with a 22" turntable double speed; both are provided with pneumatic locking of mounting head and pneumatic bead breaker. Assembled with the TCE 330 helper system with ensures safe and easy mounting and demounting operation of any kind of tires, even the most difficult UHP or RFT. TCE 4400 and TCE 4400-22 is the right equipment to use without sacrificing performance and comfort; they are especially designed for medium volume workshops. Easy and speedy to use New worldwide standard positioning of the control pedal in order to avoid misuse or error by using other similar products Provided with inflating system controlled by gun equipped with scale manometer bar/psi Tubeless inflating system directly mounted in the turntable jaw and controlled by side pedal allowing a stronger air flow (only: TCE 4405 / 4405-22 models) Bead breaker pad shape designed in order to avoid any scratch on the rim Lubricant bucket holder (adjustable bucket size) TCE 330, 2 independent pressing points helper arm The second speed in the TCE 4400-22 is selected by pedal Technical data TCE 4400 TCE 4400-22 Power supply 3 Ph 400 V 50 60 Hz 1 Ph 230 V 50 Hz 3 Ph 400 V 50 60 Hz 3 Ph 230 V 50 60 Hz Outside rim clamping 10 20 10 22 Inside rim clamping 12 23 12 25 Rim width 3 11 3 11 Max. wheel diameter 1000 mm 1000 mm Bead breaker range 65 300 mm 65 300 mm Air connection 8 10 bar 8 10 bar Speed of rotation 7,5 rpm 7 15 rpm Dimensions max. (H x D x W) 1860 x 1660 x 1200 mm 1860 x 1660 x 1350 mm 1860 x 1660 x 1800 mm* 1860 x 1660 x 1950 mm* Net weight 223 kg 230 kg 5

TCE 4430 / TCE 4435 Maximum performance and durability TCE 4430 TCE 4430 S121 Bosch TCE 4430 and TCE 4435 tilt-back tire changers provide a range of innovative features designed for maximum speed, performance and durability even for the toughest UHP or RFT passenger car and light commercial tires. With the addition of a special accessory kit, these machines can also handle motorcycle tires. Bosch TCE330, the new helper arm device is especially designed for tire specialists and high volume workshops. Innovative G-Frame At the heart of the new tire changers is the unique Bosch G-Frame concept. This advanced design feature increases the rigidity of the machine to shorten the flow of internal forces and avoid tire and rim damage. It also improves the speed of the tire change, making the new machines ideal for high-volume or specialist tire workshops. Innovation and user-friendliness The twin-speed turntable is easily operated using a pedal. In the 230 V version, a special electronic system automatically ensures higher torque and a smooth start. The revised design of the turntable makes it easier to clamp the rim. The redesigned proctectors of the jaws allow internal clamping of steel rims without timeconsuming conversion. The integrated tire inflation system is controlled by a side pedal and is up to 25 % faster than similar devices. Technical data Power supply TCE 443x 3 Ph 400 V 50 60 Hz 1 Ph 230 V 50 Hz Outside rim clamping 10" 22" Inside rim clamping 12" 25" Rim width 3 12,5 (4 15 with TLL) Max. wheel diameter 1100 mm Bead breaker range 70 397 mm Bead breaking force Air connection TCE 330: max. press force 11500 N 8 10 bar 5500 N (horizontal arm) 2500 N (follower arm) 6

TCE 4470 / TCE 4475 Strong service for wide tires, UHP and run-flat TCE 4470 S441 TCE 4470 S121 TCE 4470 and TCE 4475 are pneumatic tilting column tire changers for passenger cars, especially designed for tire specialists and high volume workshops. They are equipped with a 28 (external clamping) turn- Key features Big space for wheel seating outside clamping 28 inch and wheel width up to 15 inch without any special pre-adjustment Revolutionary Ergo Control bead breaker 40 % faster than previous model (optional) TCE 330, helper arm with 2 independent pressing points table, a pneumatic positioning of the mounting head and a 4-position adjustable bead breaker. Extreme rigidity of the structure and the use of the G-frame concept make them the market benchmark for robust and solid performance. The optimized reduction of flex in the operating arm guarantees safe mounting and demounting operations for any kind of tires, even the most difficult UHP or RFT. TCE 330 helper system makes the work even easier and reduces the effort of the operator. TCE 4470 and TCE 4475 are especially designed for tire specialists and high volume workshops. Technical data Power supply TCE 447x 3 Ph 400 V 50 60 Hz 1 Ph 230 V 50 Hz Outside rim clamping 12" 28" Inside rim clamping 13" 32" Rim width 3 15 Max. wheel diameter 1200 mm Bead breaker range 70 397 mm Bead breaking force Air connection TCE 330: max. press force 11500 N 8 10 bar 5500 N (horizontal arm) 2500 N (follower arm) 7

Ergonomic and easy to use for maximum performance WDK approved* Certified for RunFlat and UHP-tires Without any efforts* Pneumatic locking of the mounting head and movement of the TLL 130 allows to perfectly follow the rim profile making easier the access of the tools and allowing perfect bead extraction. For all wheel sizes and high volumes workshops Big space for wheel seating, outside clamping 22/25" and 28/32", wheel width up to 15" without any special accessories Within reach Control switches are placed to be accessible from any working area NEW TCE 330* Helper arm device ergonomic and flexible Extreme precision The horizontal arm and the follower arm allow a precise and smooth control in the whole process 5500 N and 2500 N Time saver The redesigned jaws protectors allow steel rims internal clamping without time-consuming conversion Full control, maximum reliability The control by using the lever gives the operator a maximum of sensitivity and protects the rim Ergo control* (patent pending) saving time with more comfort and safety The new hand bead breaker system allows to execute the operation always in an ergonomic working position Speedy The two-speed turntable is easily operated using a pedal *Available only for specific models 8

Your choice your requirements: TLL 130 leverless mounting head TLL 130 tire leverless system Movement of the TLL 130 allows to perfectly follow the rim profile making easier the access of the tools and allowing perfect bead extraction. The hexagonal vertical arm allows less flexion ensuring the best results. The upgraded TLL 130 with it`s new surface treatment is approved from WDK and BMW. IT inflation technology Tire inflation and blast of air are controlled by pedal Tire inflation assistance system through the jaws, which thanks to the new design, guarantees higher air jet power Tire inflation system is controlled by a side pedal and is up to 25 % faster than similar devices. Innovation and user-friendliness The twin-speed turntable is easily operated using a pedal. In the 230 V version, a special electronic system automatically ensures higher torque and a smooth start. The revised design of the turntable makes it easier to clamp the rim. The redesigned proctectors of the jaws allow internal clamping of steel rims without time-consuming conversion. The integrated tire inflation system is controlled by a side pedal and is up to 25 % faster than similar devices. 9

Ergo Control System Bead breaking at the tip of your finger The Ergo Control is a hand bead breaker system that allows you to execute the operation of tire-beading always in an ergonomic working position, reducing the time with less effort while always being in a safe position. Especially designed for tire specialists and high volume workshops. Fast with effortless performance. Ergonomic working position the back is less stressed with respect to the traditional system, just stand in front of the wheel: u u No need to bend down and check like on traditional roller-bead breakers. No sit-down-step like on conventional bead-breaking machines. No shock to the operators arm Full Direct Control Ergonomic working position Working range positions easily selectable Increase of safety the use of the main bead breaker lever (patented) avoids shock to the operators arm making bead breaking a safe operation. Reduction to the risk of wheel damage the control by using the lever gives the operator a maximum of sensitivity. Reduce time of operation reduction of operation time due to the possibility to stop the bead breaker instantly (no need to open or close the cylinder completely). Less cost reduction of air consumption. 10

Tire changer overview Machine types and part numbers Machine type 230V Edition 400V Edition Outside clamping Inside clamping IT-Device Air in claws Control Ergo TCE 330 TLL 130 WdK-Kit TCE 4400 *1694100452 1694100435 10"-20" 12"-23" TCE 4400 S40 1694100439 10"-20" 12"-23" TCE 4400 S44 1694100441 10"-20" 12"-23" TCE 4405 *1694100453 1694100437 10"-20" 12"-23" TCE 4400-22 *1694100463 1694100461 10"-22" 12"-25" TCE 4400-22 S40 1694100467 10"-22" 12"-25" TCE 4400-22 S44 1694100469 10"-22" 12"-25" TCE 4430 1694100294 1694100295 10"-22" 12"-24" TCE 4430 S001 1694100362 1694100363 10"-22" 12"-24" TCE 4430 S44 1694100359 1694100350 10"-22" 12"-24" TCE 4430 S441 1694100374 1694100375 10"-22" 12"-24" TCE 4430 S401 1694100417 1694100416 10"-22" 12"-24" TCE 4430 S421 1694100425 10"-22" 12"-24" TCE 4430 S121 1694100448 1694100456 10"-22" 12"-24" TCE 4435 1694100300 1694100301 10"-22" 12"-24" TCE 4435 S44 1694100351 1694100352 10"-22" 12"-24" TCE 4435 S001 1694100364 1694100365 10"-22" 12"-24" TCE 4435 S441 1694100376 1694100377 10"-22" 12"-24" TCE 4435 S421 1694100426 10"-22" 12"-24" TCE 4435 S121 1694100449 1694100457 10"-22" 12"-24" TCE 4470 S44 1694100384 1694100385 12"-28" 13"-32" TCE 4470 S441 1694100396 1694100397 12"-28" 13"-32" TCE 4470 S40 1694100393 1694100392 12"-28" 13"-32" TCE 4470 S401 1694100405 1694100404 12"-28" 13"-32" TCE 4470 S421 1694100434 12"-28" 13"-32" TCE 4470 S121 1694100428 1694100454 12"-28" 13"-32" TCE 4475 S44 1694100386 1694100387 12"-28" 13"-32" TCE 4475 S441 1694100398 1694100399 12"-28" 13"-32" TCE 4475 S121 1694100429 1694100455 12"-28" 12"-28" *Pole not assembled 11

Accessory program to improve your work 1 695 101 402 (for TCE 4400) 1 695 101 502 (for TCE 4400-22) Jaws plastic protection kit (4 pcs.) 1 695 103 542 Scooter adaptors for TCE 4400 (4 pcs.) 1 695 101 502 (for TCE 443x) 1 695 102 148 (for TCE 447x) Jaws plastic protection kit (4 pcs.) 1 695 103 543 Motorbike/scooter adaptors for TCE 4400 (4 pcs.) 1 695 101 608 Demounting head tongue protection (5 pcs.) 1 695 101 575 Motorbike/scooter adaptors for TCE 4400-22, 443x, 447x (4pcs.) 1 695 102 725 Mounting tool cover 1 695 106 190 Roller board 1 695 106 152 Plastic protection for bead breaker suitable 1 695 101 372 External IT kit 1 695 105 191 Plastic rim protection 1 695 901 808 TCE 330 1 695 103 211 Plastic mounting/demounting head complete with adaptor 1 695 105 190 Mounting lever (WdK-Model) 1 695 102 584 Storage kit 1 695 103 261 Bead pressing device (thin) 1 695 103 216 Bead pressing device (thick) 1 695 101 518 Bead breaking bearing motorbike wheel 1 695 107 467 TSL 230 tire lift. Mounted on the "right" side of the machine 1 695 103 210 Motorbike mounting head kit 1 695 103 060 Kit WDK for run flat and ultra high performances tires 12

What drives you, drives us. Technology from Bosch is used in practically every vehicle in the world. For us, the focus is on people and helping them to stay mobile. We have been dedicated to people for more than 125 years with our pioneering spirit, research, production and expertise. Our dedication is an unwaivering commitment to providing them with a unique combination of parts, diagnostics, workshop equipment and services: state-of-the-art solutions for efficient vehicle repairs innovative workshop equipment and software also available on favorable lease terms the world s largest range of new and remanufactured spare parts fast, reliable delivery service expert customer care via our hotline extensive range of training courses specific sales and marketing support plus many other services Subject to technical and program changes. AS/SEN-WTE EN 2 TCE NEX 160 2016/3 Robert Bosch GmbH Automotive Aftermarket Business Unit Automotive Service Solutions 73201 Plochingen Germany www.bosch-workshop-world.com