SPECIALTY TAPES, LLC 4221 Courtney Road Franksville, WI 53126 Tel: 262.835.0748 Fax: 262.835.0749 www.specialtytapes.net mchamberlain@specialtytapes.net DOUBLE COATED AND ADHESIVE TRANSFER TAPES: D620 Double coated polyester tape Bonding low energy substrates such as plastic, foam and rubber; laminating for the gasket and electronics industries D628 D629 Ultra thin, double coated polyester, acrylic High performance, double coated splicing 8 85 4 111 Bonding, laminating, mounting 8 70 2.3 111 High speed splicing 76 135 17.5 34 D644 Self wound, double coated silicone tape Splicing, mounting, laminating 33 60 5.3 142 D657 D658 D670RE D675 Differential polyester tape with a high tack acrylic on one side and a low tack, removable on the other side Differential polyester tape with a high tack acrylic on one side and a low tack, removable on the other side Tuff Tape III high performance splice & locate tape (red) High shear, highly temperature resistant, red transfer tape Repositionable, temporary bonding 34 42/20 3.3 128 Repositionable, temporary bonding 36 50/2.5 4.5 144 Splicing paper or films; used in both flying and manual splicing applications/red detection splice Splicing paper or films; used in both flying zero speed and manual splicing applications D681EZ Silicone/acrylic, double coated film tape Primerless bond to a variety of surfaces including silicone rubber and silicone sponge 45 80 8.2 68 N/A 35 2 N/A 31 66/55 4.8 124 D684 Rubber based free film General purpose mounting N/A 180 2 N/A SPECIALTY TAPES D685 D687 D698 Grab-It double coated polyester tape with an aggressive acrylic Double coated polyester, rubber Therma-Bond - transfer tape with a heat activated on one side and an acrylic based pressure sensitive on the other side Ultra high tack splicing tape for bonding and mounting low energy surfaces, plastics, films, etc. Loop tack 130 oz/in to polypropylene. 8 80 6.2 111 Holding, mounting, splicing 34 180 5 128 Heat activated side produces a foam tear bond to lighter extrusion of rubber profiles including: EPDM, Santoprene and other materials. It offers an excellent economy when a foam carrier is not necessary. Eliminates priming and the use of general purpose double coated tapes. D706 31 mil double coated acrylic foam tape Bonding when aggressive strength with elevated temperature resistance is needed D709 43 mil double coated acrylic foam tape Bonding when aggressive strength with elevated temperature resistance is needed N/A 80 (PSA) 4.5 N/A N/A 350 31 N/A N/A 400 43 N/A D734 Adhesive transfer Premium high tack splicing, bonding and mounting N/A 25 1.4 N/A D739 D743 High tack, double coated acrylic High tack/low tack double coated polyester High speed splicing 34 107 8 128 Repositionable laminating 32 100/7 6 132 2009 Tape Products Directory 157
D748 Therma-Bond - acrylic foam tape with a heat activated on one side and an acrylic based pressure sensitive on the other side D749 High tack/low tack double coated on 3 mil PET D750 Therma-Bond - a medium density acrylic foam tape with heat activated on one side and acrylic PSA on the other side Heat activated side produces a foam tear bond to EPDM, Santoprene and other materials. Acrylic PSA side bonds to most surfaces with applications including: automotive; painted metal; and various other plastic and metal surfaces. N/A 148 31 N/A Repositionable laminating N/A 100/7 7.5 N/A Heat activated side produces a foam tear bond to EPDM, Santoprene and other materials. Acrylic PSA side bonds to most surfaces with applications including: automotive; painted metal; and various other plastic and metal surfaces. D752 Silicone transfer Mounting and bonding in the electronics, PCB, nameplate and splicing industries D757 D/C PET silicone/acrylic differential Bonding silicone rubber to metal and plastics in electronics and industrial applications N/A 400 45 N/A N/A 40 2 N/A N/A 70/95 5.8 N/A D763 5 mil transfer Bonding, mounting for textured or rough surfaces N/A 120 5 N/A D766 High performance, acrylic transfer tape Designed to bond to a variety of surfaces N/A 75 2 N/A D767 High performance, acrylic transfer tape Designed to bond to a variety of surfaces N/A 118 5 N/A D768 D769 D773 Polyimide double coated with silicone Tuff Tape III ultra high tack conformable bonding tape Double linered, double coated black/silver reflective tape Polyimide D/C for bonding high temperature silicone rubber and foams Bonds to vinyls, fabrics, plastics and irregular surfaces. Resistant to heat, cold and moisture. Assembly and bonding for electronics components and LCDs, where removability is a consideration D774 D/C 1 mil polyimide/silicone Electrical insulation, masking and electronic component bonding D779 Double linered, double coated black/white reflective tape Assembly and bonding for electronics components and LCDs, where removability is a consideration D786 Blue, high-speed, flying, splicing tape Splicing non-release coated paper and films on the fly, which reduces machine down time and increases production D795 Green, double sided, non-woven, splice tape High speed splicing of non-silicone materials. Hand tearable. D888EZ Silicone/acrylic, double coated film tape Primerless bond to a variety of surfaces including silicone rubber and silicone sponge 30 40 4 60 45 80 8.2 68 31 45 / 20 2 128 30 35 4 70 31 50 / 30 3 128 8 85 4.5 111 N/A 45 5.6 N/A 31 55/85 4.8 124 D916 Double coated UPVC High strength, permanent bonding and mounting 18 110 8 67 D969 High tack, silicone/acrylic double coated film tape Primerless bond to a variety of surfaces including silicone hardcoat, rubber and sponge laminations D980 3.5 mil transfer Bonding to rubber, EPDM, plastic. Replaces many 5 mil applications. D990 Double length rolls reverse wound ATG, 72 yard & 120 yard length rolls Picture framing, splicing, core start up, mounting and assembly 31 66/95 5.8 129 N/A 130 3.5 N/A N/A 50 2 N/A D991 2 mil transfer Premium high tack splicing, bonding and mounting N/A 50 2 N/A D996 Double coated, black polyester, acrylic Splicing, bonding, laminating 8 95 5.4 111 158 2009 Tape Products Directory
D999 Double coated, black polyester, acrylic D1100 Extra thin double coated polyester tape - hand tearable D1769 RIP&STIK D/C polyester w/acrylic - hand tearable Bonding, mounting, laminating 8 80 5.4 111 Double coated hand tearable laminating tape for metal, plastics, foams, rubbers and textured substrates. Excellent temperature resistance from - 40 to +250F Extremely aggressive, high tack/peel, great for irregular surfaces, resistant to environmental extremes D2210 D/C 1 mil Kapton /silicone Electrical insulation, masking and electronic component bonding D2220 D/C 2 mil Kapton/silicone Electrical insulation, masking and electronic component bonding D2070 D/C high performance transfer Excellent quick stick, plasticizer resistant, water and moister resistant, extreme heat cold and humidity resistant <8 50 3.3 <111 n/a 94 3.5 n/a 30 35 4 70 50 25 5 60 n/a 60 2 n/a SINGLE COATED TAPES CW21S 2 mil polyester, silicone (green) Splicing, high-temp masking 55 40 3.3 171 CW21SL Linered, 2 mil polyester, silicone (green) Splicing, die-cutting 55 40 5.3 171 S22 2 mil polyester, silicone (clear) Clear splicing of silicone release coated surfaces 55 36 3.5 171 S195 Aluminum foil tape Waterproofing, vapor barrier, and air leakage. Highly reflective. Electrical insulation shielding. S195A 5 mil aluminum foil tape self wound Conformable aluminum for irregular and curved surfaces. Superior bond; excellent for die-cutting. S195C 5 mil aluminum foil tape w/liner Conformable aluminum for irregular and curved surfaces. Superior bond; excellent for die-cutting. S291 S292 Polyester - silicone system (Bl, Rd, Cl, Gr) Polyester - silicone system (Bl, Rd, Cl, Gr) 29 75 5 n/a 26 65 5 n/a 26 65 5 n/a High temperature/splicing 58 40 3.5 130 High temperature/splicing 28 40 2.4 115 S292CLA Polyester - silicone (clear) High temperature/splicing 28 40 3 115 S294 S295 Polyester - silicone system (Bl, Rd, Cl, Gr) 2 mil polyester coated with silicone Masking, powder coating and composite bonding in high temperature applications requiring clean removability Powder coating / masking, withstands temp up to 425F S54 Black Tunnel Tape Cable & wire hold down for theaters, convention centers, AV and motion picture S56 Black/Yellow Tunnel Tape Patented hazard warning tape for holding down cables & wires S350 1 mil polyester PCB masking tape (blue, red) High temperature/splicing for all types of masking operations during circuit board production - blue silicone system 28 35 2.4 115 58 35 3.4 130 20 85 9.5 22 20 85 9.5 22 28 30 3 115 S504 4 mil polyester, silicone (red) Carrier tape for electronics 108 10 5 197 2009 Tape Products Directory 159
S545B S599 1 mil polyester w/removable acrylic Top side release coated polyester, silicone (blue, red) Wafer dicing tape; electronics industry 26 20 2 138 Provides a continuous release coated surface when splicing S626 6.5 mil polyester protective film tape Designed as a mounting tape for holding honeycomb cardboard constructions during the manufacturing process S674 Removable protective film tape Designed for use as a protective mask that must withstand high temperatures and provide clean removal, even after extended time periods S704 S736 S737 S741 S768 S768L Topside release coated, linerless silicone splicing tape (red) Topside release coated, linerless, PET film coated with low adhesion acrylic Low adhesion, removable carrier offering quick stick properties Topside release coated, linerless, PET film coated with low adhesion acrylic Polyimide/silicone tape, with exceptional high temperature resistance and puncture resistance Linered, polyimide/silicone tape, with exceptional high temperature resistance and puncture resistance Developed for splicing release papers and double sided pressure sensitive tapes 55 50 3.5 170 195 190 11.5 150 108 1.5-6.0 5 197 26 30 2.5 138 Removable film process and carrier tape 36 0.5 2 144 Firm hold for die-cutting; clean removal after extended bonding; hi-temp resistance; UV and moister resistant n/a 0.75 2 n/a Removable film process and carrier tape 36 2.5 2 144 Masking, electrical insulation 30 25 2.5 70 Masking, electrical insulation 30 25 2.5 70 S770 2 mil polyimide/silicone Masking, electrical insulation 50 22 3.5 60 S771 5 mil polyimide/silicone Masking, electrical insulation 98 23 6.5 65 S781 Self-wound, blue acrylic tape Designed to stick to low energy surfaces 58 60 5.5 130 S785 S788 S789 S790 Grab-It high tack polyester tape with acrylic system Self-wound PET removable acrylic Self-wound PET removable acrylic Topside release coated, linerless, PET film coated with medium adhesion acrylic Designed with a high initial tack for splicing low energy films, including polypropylene Packaging applications when FDA approved s are necessary Protective tape with non-silicone release system for pipe wrapping applications 36 62 3.5 144 36 41 2.5 144 36 25 2.5 144 Medium adhesion film process and carrier tape 36 25 2 144 S791 Red acrylic splicing tape Designed for splicing applications, with excellent conformability and visibility S792L Anti-static, low adhesion, single-sided, linered, removable protective film tape 28 35 2 115 Used as a protective mask 36.3-1.0 4.5 144 S796 1 mil PET, silicone, red Splicing/roll closure of silicone coated materials 26 25 2.5 138 S866 Polyester, rubber (orange or clear) Splicing, tabbing, core starting 38 95 3 149 160 2009 Tape Products Directory
S870 Tuff edge banner hem tape Replaces grommets in banner applications and adds a supportive hem eliminating sewing operations N/A 115 11.5 N/A S882 5 mil UHMW polyethylene Abrasion resistant, anti-stick 30 80 7 300 S884 10 mil UHMW polyethylene Abrasion resistant, anti-stick 55 90 12 450 S922 Low tack polyester tape Surface protection 36 26 2.5 144 S945 1 mil polyester, silicone (variety of colors) A conformable, low profile splice or platers tape for PCB S950 Low tack polyester tape Surface protection with conformability and clean S950L Low tack, linered polyester tape Surface protection with conformability and clean S950BL Low tack, polyester tape (blue) Surface protection with conformability and clean S950M Low tack, polyester tape (clear) Surface protection with conformability and clean S950ML Low tack, linered polyester tape (clear) Surface protection with conformability and clean S950RD Low tack, polyester tape (red) Surface protection with conformability and clean removal S953 Polystyrene, rubber Thermoforming splicing carrier breakage before high tack rubber adhesion could be measured S972 Low tack polyester tape Surface protection with conformability and clean S972L Low tack, linered polyester tape Surface protection with conformability and clean S972M Low tack polyester tape Surface protection with conformability and clean S972ML Low tack, linered polyester tape Surface protection with conformability and clean S972BL 1.5 mil polyester high performance low tack removable (blue) Surface protection with conformability and clean removal. Exhibits good long term UV resistance. S998GR High tack polyester, silicone (green) Ultra high tack silicone splicing, loop tack exceeds 90 oz/in S1006 S1032 Clear, conformable polyester, coated with silicone High tack, polyester, coated with acrylic 26 35 2.5 138 36 0.5 2 144 36 0.5 2 144 37 N/A 4.8 3.5 36 1.5-6.0 2.5 144 36 1.5-6.0 2.5 144 36 1.5-6.0 2 144 36 1.5-6.0 2 144 36 1.5-6 2.5 144 36 45 3.3 145 Clear, silicone splicing tape 26 35 3 138 Premium, high tack splicing, seaming, tabbing, hinging 55 60 4 171 2009 Tape Products Directory 161
S1198 Glass cloth silicone Masking, electrical insulation - temperatures to 500F 184 30 7.5 6 S2210 1 mil Kapton/silicone Masking, electrical insulation 30 25 2.5 70 S2210AS 1 mil polyimide anti-static with silicone Masking, electrical insulation, PCB protection 30 23 2.6 70 S2220 2 mil Kapton/silicone Masking, electrical insulation 50 22 3.5 60 S2250 5 mil Kapton/silicone Masking, electrical insulation 98 23 6.5 65 Tuff Tape III, Grab-It, Therma-Bond and Tunnel Tape are trademarks of Specialty Tapes Santoprene is a registered trademark of Monsanto Kapton is a registered trademark of Dupont 162 2009 Tape Products Directory