MONDAY SEPTEMBER 18, 2017 Session Title: C1.1: Coatings and thin films 1/6 -Friction Chairperson: A. Cavaleiro, R. Peng PM2:17.30-19.50 17.00-17.30 PM1:15.00-17.00 11.00 11.20 11.40 Adhesion and tribological performance of hard CAPVD coatings 146 12.00 Developing nano-layered coatings for application on high speed cutting tools 1735 12.20 Effect of period on properties of Ti0.54Al0.46/Ti0.54Al0.46N multilayer coatings deposited by reactive gaz pulsing process 12.40 Non-reactively sputtered ultra-high temperature Ta-C coatings 532 Highlight Session Title: C1.1: Coatings and thin films 2/6 Coatings structure I Chairperson: T. Polcar, D. Holec 692 15.00 Novel thin protective coatings for automobile engine valves 1667 Highlight 15.40 Effects of Annealing on the Nanostructure of PVD CrCuAgN Nanocomposite Coatings Microstructural characterization of Hf-doped CrAlN thin films deposited by DC magnetron sputtering 16.00 Study on the atomic and electronic structure in CrN/AlN multilayers 1405 16.20 16.40 17.30 Insights into the growth of GaN and Fe based nitrides using Electron Beam Physical Vapour Deposition. Structural and mechanical properties of ZrMo thin films: from the nanocrystalline to the amorphous state Chairperson: Z. Grzesik, A. Cavaleiro Role of point defects for predicting phase stability: a case study of Ta-Al-N and Nb- Al-N systems 1474 1898 1335 435 17.50 Synthesis of (Nb,Ti)N ultrathin films by Chemical Vapor Deposition 1145 18.10 18.30 18.50 19.10 19.30 Can we design frictionless material? Session Title: C1.1: Coatings and thin films 3/6 Coatings structure II Effect of bias voltage induced microstructure on the mechanical properties of new nanostructured Ti-Nb-Zr coatings for implant materials Amorphous aluminum oxides: CVD processing, local coordination and multifunctionality Scanning Kelvin Probe Blister Studies of the Delamination of Epoxy Films on Organosilane Modified ZnMgAl Alloy Coated Steel Ab initio study of the atomic level structure of TiO2-TiN interfaces for antibiofouling applications Effect of electropolishing on conventional and sever shot peened surfaces properties 1943 1108 Highlight 1481 858 1642 1890 796 Keynote 1/8
TUESDAY SEPTEMBER 19, 2017 Session Title: C1.1: Coatings and thin films 4/6 -Wear coatings Chairperson: N. Markocsan, E. Aperathitis 11.00 11.20 Elaboration of wear resistant carbide-base surface layers via concentrated solar power Stress reduction in hard Ti(Al,V)N films resistant to cracking by energy delivered during their growth 654 Highlight 517 11.40 12.00 Nano-sized carbon black particle reinforced composite coatings: mechanical behavior-structure relation Structure, mechanical and tribological properties of HVOF sprayed (WC-Co+Al) composite coating on ductile cast iron 1069 672 12.20 ZIRCONIA FILMS: MICROSTRUCTURES AND MECHANICAL STRENGTH 385 12.40 Hot corrosion behavior of HVOF CoNiCrAlY(Hf) coating on Ni-based superalloys 860 17.00-17.30 PM1:15.00-17.00 Session Title: C1.1: Coatings and thin films 5/6 Chairperson: P. Psyllaki, R. Oliveira 15.00 Functional Coatings by Liquid Feedstock Plasma Spraying 1098 Highlight 15.40 16.00 16.20 16.40 High-T coatings Structure, mechanical and tribological properties of Zr-Si-B-(N) nanofilms with oxidation resistance up to 1400 C Corrosion mechanism in Thermal Barrier Coatings during exposure to a gas mixture containing SO2 Sintering behaviour of columnar thermal barrier coatings produced by axial suspension plasma spraying Microstructure of self-healing thermal barrier coatings deposited by suspension plasma spraying Requirements for High Temperature Materials and Coatings in Future Energy Systems with Growing contribution of Renewable Energy Generation 252 964 368 702 1110 Highlight 2/8
TUESDAY SEPTEMBER 19, 2017 Session Title: C1.1: Coatings and thin films 6/6 Composite coatings Chairperson: L. Singheiser, A, Cavaleiro 17.30 Evaluation of Young's Modulus at Elevated Temperatures of Thermal Barrier Coating by Bending Resonance Method 1971 PM2:17.30-19.30 17.50 18.10 HYBRID NANOCOMPOSITE COATINGS BY AEROSOL-ASSISTED ATMOSPHERIC COLD PLASMA DEPOSITION: PREPARATION, CHARACTERIZATION AND APPLICATIONS The growth of silver nanoparticles on titanium dioxide coatings partially covered by graphene sheets 18.30 Water borne polyurethane composite films with few layer graphene 1339 18.50 Intrinsic hydrophobicity of thin films of ceramics based on low-electronegativity metals prepared by magnetron sputtering 395 2397 530 19.10 High-temperature Hf B Si C N films with controlled electrical conductivity and optical transparency prepared by pulsed magnetron sputtering 141 3/8
WEDNESDAY SEPTEMBER 20, 2017 Session Title: C1.2: Coatings deposition routes and novel characterization techniques 1/5 Deposition routes I Chairperson: R. Cremer, M. Bender 11.00 11.20 11.40 12.00 12.20 Enabling Mobility for Tomorrow with Surface Technology Controlled reactive HiPIMS of thermochromic VO2 films at a low deposition temperature (300 C) Phase formation and oxidation behaviour of cathodic arc evaporated Al1-x-yCrxFey and Al1-x-yCrxFeyOδ thin films A comparable study of thermochromic VO2 films grown by sputtering and hydrothermal synthesis techniques 2572 Keynote 143 633 712 12.40 Cathodic arc sputtering of lower titanium oxides 2441 13.00 Nitrogen Ionic Implantation into Niobium for Technological Applications 1275 Session Title: C1.2: Coatings deposition routes and novel characterization techniques 2/5 Deposition routes II Chairperson: N. Bagcivan, H. Biederman PM1:15.00-17.00 15.00 15.40 An Application for the static large area PVD technology with a rotary cathode array: Deposition of next generation MOx active layers for AM-TFT display backplanes Thermal spray coatings deposition on ballistic aramide textiles for improved performance lightweight protective panels 16.00 Microstructural Analysis of 200 µm Thin Sheets Coated by Laser Cladding 1025 16.20 Effect of bath composition for Ni-P coatings on carbon fibres 507 16.40 ECR Plasma deposited a-sicn:h as insulating layer in piezoceramic modules 807 2559 1953 Keynote 17.00-17.30 4/8
WEDNESDAY SEPTEMBER 20, 2017 Session Title: C1.2: Coatings deposition routes and novel characterization techniques 3/5 Characterization Chairperson: R. Cremer, G. Orhan 17.30 Nanoparticle and Nanocomposite Films with Plasma Polymers 756 Highlight 17.50 Core-shell nanoparticles arising from plasma polymerization 1682 PM2:17.30-19.30 18.10 18.30 18.50 Production, Characterization, and Residual Strain Analysis of Thick Plasma Sprayed Tungsten Coatings for Nuclear Fusion Applications Nano beam X-ray diffraction analysis of stress and strain in high-temperature oxidation resistant Mo-Si-B/Ti-Al-N multilayer coatings Tribiological behavior of TC4 alloy modified by high-frequency induction paste alloying technology 759 903 862 19.10 Production of carbon coated Al-foams and evaluation of their mechanical behaviour 2462 5/8
THURSDAY SEPTEMBER 21, 2017 Session Title: C1.2: Coatings deposition routes and novel characterization techniques 4/5 -Biocoatings Chairperson: R. Cremer, A. R. González-Elipe 11.00 Zinc and Zinc-Iron Nanoparticles as Oxygen Scavengers 1541 Highlight 11.20 Plasma coating of biodegradable nanofibers to generate smart antibacterial surfaces 341 11.40 12.00 Characterization of waterborne polyurethane-nano silica coatings for icephobic applications Plasma micro-nanotextured 3D surfaces and their applications in wetting and life sciences 12.20 Sublimating Dry Ice Coatings as a Means for Contactless Manipulation of Liquids 1709 1469 586 12.40 Anodically electrodeposited Pb-Co-Sn coatings as electrocatalyst for oxygen evolution reaction 418 13.00 Impact of solvent composition on formation of PEMFC electrode layers 1420 Session Title: C1.2: Coatings deposition routes and novel characterization techniques 5/5 -Multi-coatings Chairperson: D.S. Calderon, A. Weisenburger 15.00 Microstructural control over porous oxide multilayers prepared by MS for environmentally stable 1D photonic structures 1990 Highlight PM1:15.00-17.00 15.40 16.00 The use of synergistic effect between the optical and semiconductor properties of AgNPs/TiO2 photonic crystals for the photocatalytic activity enhancement Photoluminescence properties of porous silicon embedded with II-VI semiconductors High Transparent and Stable Silver Nanowires as Flexible Transparent Electrode using Plasma Technique 2390 743 193 16.20 Atomic layer deposition of copper oxide and metallic copper thin films 432 16.40 Fabrication and properties of electroplated Fe Cu continuous films and porous microstructures deposited onto e-beam lithographed patterns 550 17.00-17.30 6/8
THURSDAY SEPTEMBER 21, 2017 Session Title: C1.3: Surface engineering and modifications 1/3 -Corrosion Chairperson: Κim Dogeun, E. Aperathitis 17.30 Increased corrosion resistance by surface modification using intense pulsed electron beams 251 Highlight 17.50 Stategies to correlate the microstructure of chromium based and chromium free conversion layers on aluminium alloy to their electrochemical properties 541 PM2:17.30-19.30 18.10 18.30 18.50 Role of anodization treatment for in-situ growth of LDH-nanocontainers used for active corrosion protection of aluminum alloy AA2024 Anodizing of magnesium in alkaline media: a description of the mechanisms leading to the dielectric breakdown A chemical view of chromate conversion coating on magnesium alloys EV31A: an XPS and Auger spectroscopies approach 1083 1455 1867 19.10 Influence of cyclic oxidation in moist air on surface oxidation-affected zones 22 7/8
FRIDAY SEPTEMBER 22, 2017 Session Title: C1.3: Surface engineering and modifications 2/3 -Functionality I Chairperson: E. Aperathitis, R. Peng 11.00 Effect of Microstructure Features on DLC Delamination and Blistering 359 11.20 Thermochemical heat storage systems with honeycomb filter type heat exchanger systems 1095 11.40 12.00 12.20 ANTIFOULING PROPERTIES OF PLASMA ELECTROLYTIC OXIDATION (PEO) COATED ALUMINUM ALLOYS TESTED IN SEAWATER STUDY OF THE TRIBOCORROSION PROPERTIES OF PEO COATINGS PRODUCED ON AZ91 MAGNESIUM ALLOY A possible explanation for the delay in micro-discharges appearance during PEO of Al 253 311 1225 12.40 Hybrid coatings with Cu-based nanoparticles on polymer and steel surfaces for biofouling control 929 13,00 Towards the Plasmonic Optical Nanopore on Pyramid 423 Session Title: C1.3: Surface engineering and modifications 3/3 -Fatigue & Wear Chairperson: E. Aperathitis, R. Cremer 15.00 Pulsed Plasma Surface Functionalized Nanosilver for Gene Delivery 1236 PM1:15.00-17.20 Microstructural Study of Shot Peened Nickel-based Superalloy (U720Li) under Isothermal Exposure 15.40 Fatigue of Dengeling Treated Al-Alloys 2270 16.00 Surface modification of geomaterials using high-power nanosecond pulses 1391 16.20 Investigation of an advanced heat treatment of ZrNb7 for improved wear resistance in tribological applications 2260 206 17.00-17.30 8/8