INDUSTRIAL FILTERS APPLICATIONS Filtration of galvanic baths (Nickel, Zinc, Copper, Chromium, Gold ). Filtration of chemical products, process fluids and effluents. Filtration and oil removal of pretreatment baths, degreasing baths, cleaning baths. www.siebec.com
INDUSTRIAL FILTERS Flow rate (m 3 /h) 0 P Série Filters 30 S Série Filters L Série Filters 0 J Série Filters 10 Filters MC 15 Filters MC 10 Filtration area MADE WITH CORROSION-RESISTANT PLASTICS OR STAINLESS STEEL EXCLUSIVE L-TECH / S-TECH PLEATED CARTRIDGE FILTRATION SYSTEM FILTRATION AREA UP TO 0 M FILTER GAUGE OF 0. TO 100 MICRONS
FILTERS PUMPS FILTERING MEDIA L-TECH / S-TECH Cartridge STD Cartridge Plates Activated carbon canister Dissolving tank Models Maximum flow (m 3 /h) Qty Filtration area (m ) Qty Height Qty x diam. (mm) Filtration area (m ) Volume (I) Volume (I) MC - MC10 M7 0.37-1 -10 MC15 M15 - M50 1.5 - - 1-10 -0 J15 T50.3-1 10-0 L0 M15 - M50 1.5 - - 0 x 195 0.5 L30 M50 1.5 7 10 3 x 195 0.7 5.8 L50 M50 - M70-5 1 5 7 0 6 x 195 1. 11.6 L51 - L59 M100 - M50 9-18 1 5 7 0 6 x 195 1. 11.6 16 L5 - L58 M10-M50 11-18 10 1 0 18 x 195.88 11.6 x 16 L81 - L89 M10 - M50 11-18 7 30 96 x 195.16 17.3 16 L8 - L88 M00 - M50 15-18 1 30 19 x 195.3 17.3 x 16 J30 T50 - T10 3.5-9. 1.5 7 10 3 x 195 0.7 5.8 J50 T70 - T00 5-10. 1 5 7 0 6 x 195 1. 11.6 S50 - S50E M100 - M90 9-6 10 1 0 60 x 58.9 11 30 P50 - P50E M10 - M50 13-3 0 36 0 5 x 56 7.8 11.6 x 100 P51 - P51E P5 - P5E M90-M390 A7-A30 M90 - M390 A7 - A30 5-36 0 36 10-0 5 x 56 7.8 11.6 x 100 6-38 8 0 9 10-0 10 x 56 15.6 11.6 x 8 100 H50 M50 Microfibres canister capacity = 11.6 litres / 700 g H51 M100 9 Microfibres canister capacity = 11.6 litres / 700 g R3 M7 Ions exchanger capacity = 3 litres R1 M15 Ions exchanger capacity = 1 litres FILTERING MEDIA Flow rate L-TECH / S-TECH Pleated cartridges : Designed and manufactured by SIEBEC, this high-capacity cartridge (180 mm diameter) fits as standard to SIEBEC L, S and P fiters and covers a wide range of industrial applications. Washable and re-usable. Porosity grade from 0. to 100 microns. Water sediment loading Paper filter discs : For use with all chamber filter units of diameter 195 / 58 / 56 mm, a large choice of thin or thick paper discs, polypropylene discs, non-woven polyester discs, PVDF discs and PTFE discs. Polypropylene wound cartridges : Inexpensive versatile cartridge. Porosity grades from 1 to 50 microns.
P SERIES FILTERS High capacity filters P51 with canisters P51 with L-TECH cartridges P50 Made of injected plastic (Polypropylene reinforced with breglass) Filtration on L-TECH pleated cartridges Choice of optional, interchangeable filtration systems High resistance to acids and bases. Max. fluid temperature = 70 C washable cartridges with a very large filtering surface (0 m²) Low operating costs Filter gauge from 0. to 100 microns Filtration on paper with 7 or 5 discs 56 mm diameter Filtration on 36 wound or spun-bonded 0 cartridges Choice of magnetic or mechanical drive pumps Flow rates of 1 to 38 m³/h Modular design Very high-capacity double chambered version (until 0 m² of the filtration area) Versions with high capacity dissolving tank Allows the addition of additives, the salt dissolution or the use of filtration agents and activated carbon powder Optional activated carbon canister, interchangeable with the L-TECH cartridge Granulated activated carbon treatment Optional canister microfiber PP interchangeable with L-TECH cartridges Oil removal from pretreatment bath, degreasing bath.
S SERIES FILTERS CARBO-TECH carbon canister S50 H.M.T (m) 0 18 Models P / S 16 Manometric head 1 1 10 8 5 1 S50 / M100 6 S50 - P50 / M10 0 3 1 8 1 16 0 8 3 36 3 5 S50 - P50 / M50 P51 / M90 P51 / A30 Flow rate (m 3 /h) Made of injected plastic (Polypropylene reinforced with fibreglass) Filtration on S-TECH pleated cartridges Choice of optional, interchangeable filtration systems Great resistance to acids and bases Max fluid temperature = 70 C (PP) washable cartridges with a very large filtering surface (10m²) Low operating cost Filter gauge from 1 to 50 microns Filtration on paper with 58 discs 58 mm diameter Filtration on 1 coiled or extruded 0 cartridges Choice of magnetic or mechanical drive pumps Flow rates of 9 to 6 m³/h Versions with high capacity dissolving tank Allows the addition of additives, the salt dissolution or the use of fitration agents and activated powdered carbon Option Carbotech system : Prefiltration S-TECH/ activated carbon canister in series Filtration and granulated activated carbon treatment in series (without any further adaptation piece)
L SERIES FILTERS Medium range filters L30 L51 Made of injected plastic (Polypropylene or PVDF) Filtration on L-TECH pleated cartridge Choice of optional, interchangeable fitration systems High resistance to acids and bases Max. fluid temperature = 80 C (PP), 110 C (PVDF) Washable cartridges with a very large filtering surface (5 m²) Low operating costs Filter gauge from 0. to 100 microns Filtration on paper with 0 to 96 discs 195 mm diameter Filtration on 7 wound or spun-bonded 10 /0 /30 cartridges Filter gauge from 1 to 50 microns Choice of magnetic or mechanical drive pumps Flow rates of 1.5 to 19 m³/h Modular design Very high-capacity double-chambered version Version with dissolving vat Allows the addition of additives or the use of fitration agents and active powdered carbon Option of activated carbon canister, interchangeable with the L-TECH cartridge Granulated activated carbon treatment
L51 PVDF L5 Carbon canister H.M.T (m) 0 Models L 18 16 Manometric head 1 1 10 8 6 3 5 6 1 3 L0-L30-L50 / M50 L50 / M70 L31-L51 / M100 0 1 6 8 10 1 1 16 18 0 5 6 L1-L51-L81 / M10 L51-L81 / M00 L51-L81 / M50 Flow rate (m 3 /h)
STAINLESS STEEL FILTERS High pressure filters L Model P Model Tank type L for 1 L-TECH cartridge Tank type P for L-TECH cartridges L-TECH pleated cartridges 0 Made of stainless steel 30 OR 316L Working pressure up to 10 bars, ow rate up to 0 m³/h Working pressure up to 7 bars, ow rate up to 100 m³/h Large filtering surface, porosity of 0. to 100 microns Good resistance to corrosion OIL EXTRACTORS H SERIES De-oiling module Made of injected plastic (polypropylene) and FPM seals High resistance to acids and bases Max. fluid temperature = 70 C Fitted with a removable polypropylene canister (capacity 11.5 litres) filed with a charge of 100% polypropylene microbres The microbres develop a wide exchange surface and have a large capacity to hold fats and oils: a 11.5 l charge of microbres (around 0.7 kg) holds an average of 6 litres of oil. They are hydrophobic, and may be compacted and incinerated Fitted with an automatically primed magnetic drive centrifugal pump Servicing free. The flow rates can be regulated from 0 to 11 m³/h with the help of the outing valve. H50
MINIPURE Treatment mini station for cutting oils (whole oils and soluble oils) and effluents (washing,rinsing waters) MP53 FIXED SKIMMER FLOATING SKIMMER MP5D Multi-tank modular design With centrifugal pump or controlled volume pump Fixed or floating skimmer option Allows associating in-series several technologies: pre-filtration on bags, filtration on cartridges, oil-extraction, treatment on activated carbon or resins Compatible with all viscosities, ow rate of to 10 m³/h Allows sucking up pollutions on the surface of baths
FILTERS MC SERIES Low capacity filter MC 10 MC15-1x10 MC15 - x10 MC15 PVDF - x10 MC15 - x0 Made of injected plastic (Polypropylene or PVDF) Filtration on cartridges Magnetic drive pump Modular design Great resistance to acids and bases. Max. fluid temperature = 80 C (PP) PVDF version for chrome plating baths Coiled or extruded cartridges Filter gauge from 1 to 50 micron Flow rates of 0. to m³/h Double-chambered versions, with in-line or parallel flow FILTERS J SERIES Vertical filters J15-0 J50-0 Made of injected plastic (Polypropylene or PVDF) Filtration on L-TECH pleated cartridge (J30 /J50 models) Choice of optional, interchangeable Filtration systems (J30 /J50 models) Choice of vertical pumps Designed to be mounted immersed in the electrolyte High resistance to acids and bases Max. fluid temperature = 80 C (PP), 110 C (PVDF) Washable cartridges with a very large filtering surface (5 m²) Low operating costs Filter gauge from 0. to 100 microns Filtration on paper with 3 to 6 discs 195 mm diameter Filtration on 7 wound or spun-bonded 10 /0 cartridges Filter gauge from 1 to 50 microns Flow rates of 1.5 to1 m³/h No connecting pipes, no risk of leaks
METAL RECLAIMERS R SERIE Recovery from rinsing water of metal ions on exchange resin Made of injected plastic (polypropylene) Recovery of metal ions pulled by rinsing water over ion exchangers Pre-filtering on a 30 micron cartridge High corrosion resistance A single run over the exchangers is usually sucient Protects the exchangers from pollution by solid particles or other impurities R3 R1 ELECTRUM Electrolytic reclaimer of precious metals Compact design with filter and integrated rectier Patented captive cartridge Low electric consumption High capacity for the recovery of gold, palladium, ruthenium, silver, and copper down to concentrations less than 5 ppm Captive depositing inside a cartridge without metal loss Fast return on investment
FRANCE SIEBEC SAS 9 rue des platanes ZAC Vence Ecoparc 3810 SAINT-ÉGRÈVE Tel. : +33 (0) 76 6 1 09 Fax : +33 (0) 76 7 0 8 contact@siebec.com DEUTSCHLAND Since its creation in 1958, SIEBEC has been designing and manufacturing in France a wide range of pumps and filters for industry as well as mini-stations for treating industrial effluents. SIEBEC GmbH Im Grund 11 Postfach 57 750 WALZBACHTAL Tel. : +9 (0)703/91300 Fax : +9 (0)703/913050 info@siebecgmbh.de ENGLAND SIEBEC U.K. Ltd Unit 3 - ST.Alban s Business Park ST. ALBAN S RD STAFFORD - ST16 3DR Ph. : + (0)1 785 7 700 Fax : + (0)1 785 6 006 sales@siebec.co.uk ESPAÑA The SIEBEC Group is present in more than 0 countries through its subsidiaries and its distributor network. PRODUCTOS GALVANIZADOS SIEBEC S.L. Enric Morera, 1 08950 ESPLUGUES DE LLOBREGAT Tel. : +3 90 03 06 0 +3 93 37 0 Fax : +3 90 03 06 50 ventas@siebec.com Head office subsidiaries distributors Votre partenaire www.siebec.com