M/000/M LINTR rodless cylinders > > Ø 5... 0 mm > > Compact, spacesaving design > > Proven sealing system > > djustable cushioning > > Magentic piston as standard Technical features Medium: Compressed air, filtered, lubricated or non-lubricated Operation: Operating pressure:... 8 bar (... 6 psi) Technical data Cylinder diameters: 5,, 0 mm Strokes: 5000 mm or 96 inches max. Non-standard strokes: on request Operating temperature: -0... +80 C (-... +76 F) max. ir supply must be dry enough to avoid ice formation at temperatures below + C (+5 F). Cylinder Ø (mm) 5 0 Port size G/8 G/8 G/ Cushion length (mm) 8 5 Theoretical thrusts at 6 bar (N) 50 0 60 ir consumption (l/cm) per stroke at 6 bar 0,05 0,056 0,088 Loading values applicable to a speed of 0, m/s. Maximum working life is normally reached below a speed of m/s. Materials: arrel: nodised aluminium alloy End covers: luminium alloy Yoke: nodised aluminium alloy Cover and Pistons: Plastic Sealing strip: PU Cover strip: P Seals: NR & PU Option selector Porting Substitute ISO G-thread (standard) M NPT- hread C Cylinder Ø Substitute 5 5 0 0 /0 /M/ Stroke 5000 max. in mm for ISO G-thread 96 max. in full inches for NPT-thread Fractional increments of stroke (inches) Substitute Substitute Substitute 0 /8 G / P /6 7/6 H /6 R /8 C / J 7/8 S /6 D 9/6 K 5/6 T / E 5/8 M Special 5/6 F /6 N Note: When specifying NPT ports the stroke should be given in inches without notice, the specifications given in this document. (998-8b) 05 Norgren GmbH 5/5 en.6.007.0
M/000/M LINTR rodless cylinders Mountings 7 0 Model Type C Type V Type S Switch mountng brackets Magnetically operated switches 7 Ø Page 6 Page 6 Page 6 5 QM/05/ Q05M Q05M7 M/P787 QM/0/ Q0M Q0M7 M/P787 0 QM/00/ Q00M Q00M7 M/P787 Page 6 & 7 Item Type Description S Yoke: zinc plated steel Mounting support: anodised aluminium Screws: zinc plated steel olts: stainless steel C nodised aluminium Screws: zinc plated steel V Zinc plated steel Screws: zinc plated steel 7 racket Plastic 0 Fitting ody: PT, O-Ringe, NR Grab ring: stainless steel Release button: POM Data sheet: en 9..00 en.6.007.0 without notice, the specifications given in this document. (998-8b) 05 Norgren GmbH 5/5
M/000/M LINTR rodless cylinders Loading values for LINTR Cylinders The values given in the table below show the forces in the directions Fy and Fz and the maximum moments Mx, My and Mz. ll values are applicable for speeds up to 0, m/s. requirement for using these values is a smooth movement of the mass over the whole stroke length of the cylinder. The reference point from which the moments for all cylinders should be calculated is the centre line of the piston. Total loads When a Lintra Cylinder has to take several loads and moments, an additional calculation is necessary using the following formula: Mx + My + Mz + Fy + Fz Mx max My max Mz max Fy max Fz max Ø Loading values (N) Fy Fz (N) Mx (Nm) My (Nm) Mz (Nm) 5 90 80 0 70 6 0 0 70 56 6 Cylinder deflection Deflection due to external force. F (N) Deflection due to cylinder weight. f (mm) 000 000 500 f= mm 0,6 0, ø5 ø ø0 00 00 50 0 ø0 ø ø5 0, 0 000 000 000 000 5000 6000 500 (mm) Cylinder Ø 0 mm, external force 0 N, distance between supports 500 mm Required: Total deflection. Deflection due to external force (f): See diagram (mm/90 N) 0 N, mm. Deflection due to cylinder weight (f): See diagram +0,6 mm Total deflection:,9 mm 0 000 500 000 000 000 5000 6000 500 (mm) Cylinder Ø mm, stroke length 500 mm, external load 00 N Maximum distance between supports = 500 mm (see diagram). Therefore additional support is required. Maximum permitted deflection: f + f mm per 000 mm stroke Result:,9 mm are below the max. permitted deflection of,5 mm 5/5 without notice, the specifications given in this document. (998-8b) 05 Norgren GmbH en.6.007.0
M/000/M LINTR rodless cylinders asic dimensions E M Z O W S S R E D T C S R E G G # stroke M cushion screw N x + # Ø E C D (Port threads) *) E E G M M N 5 7,5 5,,5 7 G /8 /8 NPT 00 0,5 8 M5-7 deep 8,5 67,8,5 7 G /8 /8 NPT 0 50 5 0 M6-0 deep 0,5 79, 9 9,5 G / /8 NPT 65 60 0 00 M6-0 deep Ø O R S S T W Z kg at 0 mm kg per 00 mm Model 5 5,5 M-,5 5,6 6, 0,60 0,5./05/M/* 6,5 5 6 M6-,5,5 9,5 0,90 0,5./0/M/* 0 58 65,5 8 8,75 M6-9 0,8,8,0 0,5./00/M/* * Insert stroke length *) Optional ISO G or NPT-thread en.6.007.0 without notice, the specifications given in this document. (998-8b) 05 Norgren GmbH 5/5
M/000/M LINTR rodless cylinders QM/000/ Foot mounting Q000M Centre support mounting type - R D E H J K L ø U N ø S R P F C G djustable Ø C D E R Ø U kg Model (C) 5 8,5 5 0 0,5 5,5 0,0 QM/05/ 0 8 6 6 8,5 5 9 0,09 QM/0/ 0 7 7,5 5 5 65,5 9 0, QM/05/ Ø F G H J K L N P R Ø S kg Model (V) 5 58 70,5 5,5 5 5 0 6,6 0,07 QM05M7 70 8 8,5 70 0 50 0 9 0,5 QM05M7 0 79 9 5 55 8,5 0 60 0 9 0,5 QM00M7 QM000M7 Swinging bridge mounting type S C F D E J G H Fx Ø C D E F G H J Fx kg Model (S) (Din7) 5 0 0 8 M 5 ± 8 9 8 5 +5 50 N 0,5 QM05M7 50 55 0 M 6 ± 8 0 7,5 + 5 0 N 0,0 QM0M7 0 60 55 0 M 6 ± 8 0 8 + 5 60 N 0,5 QM00M7 5/5 without notice, the specifications given in this document. (998-8b) 05 Norgren GmbH en.6.007.05
M/000/M LINTR rodless cylinders Technical data - Reed switches - additional informations see data sheet N/en..005 Symbol Voltage Current maximum Function Operating temperature LED Protection class Plug Cable length Cable type Weight Model (V a.c.) (V d.c.) (m) ( C) (m) (g) ~ + N 0... 0 0... 70 80 Closer -5... +80 IP66, 5 or 0 PVC x 0,5 7 M/50/LSU/*V 0... 0 0... 70 80 Closer -5... +80 IP66 5 PUR x 0,5 7 M/50/LSU/5U ~ U 0... 0 0... 70 80 Closer -5... +50 IP66 Silicon x 0,5 7 TM/50/RU/S N U K U N + N ~ 0... 0 0... 70 80 Changeover -5... +80 IP66 5 PVC x 0,5 7 M/50/RC/5V 0... 60 0... 60 80 Closer -5... +80 IP66 M8 x 0, PVC x 0,5 6 M/50/LSU/CP *) ~ K * Insert cable length; *) Plug-in connector see page ; Color code: K = black, N = brown, U = blue Drawings M/50/LSU/*V, M/50/LSU/5U, TM/50/RU/S Cable length L =, 5 or 0 m - 5, 0 L +0 50 +0 M/50/RC/5V Cable length L = 5 m 5,,5-0 L +0 50 +0,5 M/50/LSU/CP - 5, 0 00 ±5,5... 6 K,5 N U Fixing screw + N = brown; - U = blue (output) - K = black; + N = brown; - U = blue Plug M8 x, color code: K = black; N = brown; U = blue ccessories Plug-in connector cable with nut Outer cover Cable length (m) Weight (kg) Connector Connector PVC x 0,5 5 m 0,8 M8 x M/P700/5 PUR x 0,5 5 m 0,8 M8 x M/P700/5 PUR x 0, 5 m 0, M x M/P59/5 en.6.007.06 without notice, the specifications given in this document. (998-8b) 05 Norgren GmbH 5/5
M/000/M LINTR rodless cylinders Technical data - Solid state - additional informations see data sheet N/en..007 Symbol pnp + N U K Voltage (V d.c.) Current maximum (m) Function Operating temperature ( C) LED Protection class Plug Cable length (m) Cable type Weight (g) Model 0... 0 50 PNP -0... +80 IP67, 5 or 0 PVC x 0, 7 M/50/EP/*V 0... 0 50 PNP -0... +80 IP68 5 PUR x 0, 7 M/50/EP/5U pnp npn npn + N U K U + N K + U N K 0... 0 50 PNP -0... +80 IP67 M8 x 0, PVC x 0, 6 M/50/EP/CP *) 0... 0 50 PNP -0... +80 IP67 M x 0, PVC x 0, 6 M/50/EP/CC *) 0... 0 50 NPN -0... +80 IP67, 5 or 0 PVC x 0, 7 M/50/EN/*V 0... 0 50 Closer -0... +80 IP67 M8 x 0, PVC x 0, 6 M/50/EN/CP *) * Insert cable length; *) Plug-in connector below; Color code: K = black, N = brown, U = blue Drawings M/50/EP/*V, M/50/EN/*V Cable length L =, 5 or 0 m - 5, 0 L +0 ±,5 M/50/EP/CP, M/50/EN/CP - 5, 0 00 ±5,5... 6 K,5 N U M/50/EP/CC - 5, 0 7,5 00 ±5 K U,5 N Fixing screw Color code: K = black; N = brown; U = blue Plug M8 x Plug M x Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. without notice, the specifications given in this document. (998-8b) 05 Norgren GmbH 5/5 Diese Produkte sind ausschließlich in Druckluftsystemen zu verwenden. Sie sind dort einzusetzen, wo die unter»technische Merkmale/- en.6.007.07 systemen verwendete Komponenten auf verschiedene rten versagen. Systemauslegern wird dringend empfohlen, die Störungsarten aller