TECHNICAL DATA. A REFERENCE FOR The Electrical Power Industry. www. ElectricalPartManuals. com ANDERSON POWER SYSTEMS, INC.

Similar documents
Engineering Data for Copper and Aluminum Conductor Electrical Cables

NEC Ampacity Data Table (B)(2)(b) Ambient Temperature Correction Factors Based on 40 C (104 F)

ANNEX B: APPLICATION INFORMATION FOR AMPACITY CALCULATION ITEMS B (B)(1) THROUGH B (B)(7)

SERVICES CHAPTER 35. wire. For all other installations, the rating of the ungrounded conductors shall be not less than 60 amperes.

Power Systems 2 ELE3015. Lecture 1: Transmission Lines

TEMPORARY METER POLE INSTALLATION

DIVISION 26 ELECTRICAL Electrical Power Conductors and Cables

DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7

(Condensed from National Electric Code)

Electrical Conductors Line

SPECIFICATION FOR THHN/THWN-2/THW/THWN/TW ARROW ROUTE, FONTANA CA

NORMAS DE REFERENCIA AEIC CS 1: ASTM B

2003 International Residential Code ELECTRICAL PROVISIONS ONLY October 2005 EDITORIAL CHANGES SEVENTH PRINTING

REA LISTED. Throughout the catalog you will notice blue highlighted items. These are the most frequently ordered BURNDY Products.

CHAPTER 13 GROUNDING AND BONDING

ELECTRICAL DEFINITIONS

ELECTRICAL SERVICE REQUIREMENTS FOR MOBILE HOME DEVELOPMENTS

UNDERGROUND SERVICES SECONDARY

WIRING RULES AND REGULATIONS OF TOMBIGBEE ELECTRIC POWER ASSOCIATION

ORDINANCE NO NOW, THEREFORE, BE IT ENACTED BY THE CITY COUNCIL OF THE CITY OF FAIRBANKS, ALASKA, as follows:

UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:

BASIC CONCEPTS IN ELECTRICAL DESIGN. Prepared by Engr. John Paul Timola

Cables ELE E L CT E C R T R IC I C A A L L

This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update.

Title: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: Electrical Standards

NORTHEASTERN REMC ELECTRIC STANDARDS MANUAL

E APPENDIX. The following problems are intended for solution using finite element. Problems for Computer Solution E.1 CHAPTER 3

Underground Residential Distribution (Specifications for Installation) PES March 2008 Spec 11

SECTION GROUNDING

Kaf-Tech Product Specification

A is for Apple Arbutus B is for Ball Bittern

WHAT MAKES ENCORE S XHHW-2 UNIQUE? Our SuperSlick Elite technology may be installed without additonal lubricant

SECTION GROUNDING AND BONDING

1.05 Power System Fault and Coordination Study with Arc Flash Calculations

A. All materials shall be tested and listed by an OSHA approved Nationally Recognized Testing Laboratory (NRTL).

This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update.

NORTHEASTERN REMC ELECTRIC STANDARDS MANUAL

A. This section includes building wire and cable rated 600V and less Full Short Circuit Device, Coordination and Arc Fault Study

St. Clair County Electrical Code Regulations

SECTION WIRE, CABLE AND BUSWAYS. A. This section specifies providing wire, cable and busways.

6. SECONDARY SERVICES (under 600 volts) 6.1 AVAILABILITY For the electrical characteristics of available secondary services see Section 3.4.

EFFECTIVE DATE: November 1, 2011, unless a later date is cited at the end of a section. [ NMAC - Rp,

SHORT CIRCUIT PERFORMANCE TEST ON 1020 kcmil ACCC/TW CONDUCTOR FOR COMPOSITE TECHNOLOGY CORPORATION

ELECTRICAL SECTION 2

UNDERGROUND SERVICES - GENERAL SERVICE AND MULTI-UNIT RESIDENTIAL

SECTION ELECTRICAL UTILITY SERVICES

Article 300: Wiring Methods And Materials

CONSOLIDATED EDISON COMPANY OF NEW YORK, INC Van Dam Street Long Island City, NY ELECTRIC METER SHOP DEPARTMENT

UNDERGROUND SERVICES (RESIDENTIAL) SINGLE FAMILY RESIDENTIAL, DUPLEXES, OR TOWNHOUSES

Technical Bulletin #27 Wiring for Architectural Applications

15 kv EPR Insulated, Jacketed, URD Cable

6. SECONDARY SERVICES (under 600 volts) 6.1 AVAILABILITY For the electrical characteristics of available secondary services see Section 3.4.

Sentron Low Amp Busway

WIRING METHODS CHAPTER 38

A. Coordinate arrangement, mounting, and support of electrical equipment:

SECTION GROUNDING AND BONDING

GENERAL NOTES PEDERNALES ELECTRIC COOPERATIVE, INC. RESIDENTIAL AND COMMERCIAL AMP METER LOOP SPECIFICATIONS

Revisions for the 2014 National Electrical Code Part 2

CATALOG. WIRE and CABLE. borderstates.com

Design Standard Conduit for Electrical Systems

ABOUT US. 830 South West Street / Sikeston, MO / F: alanwire.com

SECTION GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY

B. Provide a complete conduit system with associated couplings, connectors, and fittings.

MECKLENBURG COUNTY. Land Use and Environmental Service Agency Code Enforcement 7/14/10 ELECTRICAL CONSISTENCY MEETING. Code Consistency Questions

MANUFACTURING TECHNICAL INSTRUCTIONS SAFETY Subject: DESIGN, MAINTENANCE AND INSPECTION OF SECONDARY ELECTRICAL DISTRIBUTION SYSTEMS

SECTION PART 1 GENERAL

POWER AND LIGHTING DISTRIBUTION Reserved

CONTENTS. B. System Design and Performance Requirements

SECTION GROUNDING AND BONDING

E101 ELEC. SPEC. Scale NONE

SECTION PARK NON-SEGREGATED BUS SPECIFICATION

Increasing the capacity of existing transmission lines by re-conductoring using ACSS HTLS conductors

The Canadian Electrical Code (Saskatchewan Amendments) Regulations, 1999

Article 324: Flat Conductor Cable (FCC) 1.! Type FCC (flat conductor cable) cable wiring system is designed for installations under.

OVERHEAD SERVICES - SECONDARY

Evaluation of Aluminum Cable Presentation for IEEE OCS September 14, 2011 Breck Booker, Southwire

12/21/2018 WHAT S NEW SINCE What's New Since SPEC BOOK 2018 SPEC BOOK 2018 SPEC BOOK WHAT S NEW SINCE 2014

B. Insulated Conductors: Stranded copper wire, green or green with yellow stripe insulation, insulated for 600 V, and complying with UL 83.

AGENDA. NEC Code-Making Panel 6. Report on Comment Meeting. December 6 December 8, Redondo Beach, CA

RESIDENTIAL QUICK REFERENCE

SECTION RACEWAYS AND BOXES FOR ELECTRONIC SAFETY AND SECURITY

SECTION OVERHEAD CONDUCTOR RAIL

NYULMC AMBULATORY CARE CENTER FIT-OUT PHASE 1 Perkins & Will Architects PC 222 E 41st ST, NYC Project: Issued for GMP March 15, 2017

Introduction to Substation Design TADP 542

SERVICE ENTRANCES. OPPD S Electrical Service Designer (ESD) shall designate the Point Of Entrance.

TEMPORARY FACILITIES

3. Intermediate metal conduit (IMC). 4. Electric metallic tubing (EMT). 5. Flexible metal conduit (FLEX). 6. Polyvinyl chloride conduit (PVC).

80M 4-Square. An antenna project to obtain a bigger signal on the 80 Meter (3.5 to 3.8 MHz) amateur radio band. Bruce Whitney W8RA

SECTION GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS

EFFECTIVE DATE: July 1, 2008, unless a later date is cited at the end of a section. [ NMAC - Rp,

thermoweld The Contractors Choice GREAT PRODUCTS GREAT SERVICE GREAT PEOPLE

POWER AND LIGHTING DISTRIBUTION

Una e mpre sa Vi akab l e GLOSSARY.

Substation Bus Design: Current Methods Compared with Field Results

OVERHEAD SERVICES - RESIDENTIAL & GENERAL SERVICE. See Chapter 3, Section 3.01 for more information about point of entrance (POE).

SECTION GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS

DOWNTOWN UNDERGROUND NETWORK SECONDARY SERVICES GUIDELINES

PV Solar Wiring Solutions

CONSTRUCTION SPECIFICATION FOR CABLE INSTALLATION

Transcription:

POWER SYSTEMS, INC. TECHNICAL DATA A REFERENCE FOR The Electrical Power Industry ANDERSON www. ElectricalPartManuals. com

TABLE NUMBER INDEX PAGE NUMBER ANGLES 65 Aluminum Angle Conductors, Physical Properties 59 66 Aluminum Angle Conductors, Electrical Properties.. 59 22 Copper Bus Angles, High Conductivity, Physical and Electrical Properties. 23 ARMOR RODS ALUMINUM 44 Preformed Armor Rods for All-Aluminum Based Conductors, Physical Properties.. 45 48 Preformed Alumoweld Armor Rods for Alumoweld Strand, Physical Properties 49 50 Preformed Cadmium Copper Armor Rods for Copper and Copper Covered Steel-Copper Conductors.. 51 47 Preformed Conductor Reference 48 51 Preformed Copper-Covered Steel Armor Rods for Copper-Covered Steel Strand and Copper Covered Steel-Copper Conductors.. 51 49 Preformed Galvanized Steel Armor Rods for ACSR Conductors, Physical Properties.. 50 45 Preformed Line-Guards for All-Aluminum Based Conductors, Physical Properties. 46 46 Preformed Line-Guards for All-Aluminum Based Conductors, Physical Properties. 47 42 Straight Armor Rods for ACSR, Physical Properties 44 40 Straight Armor Rods for Stranded Aluminum Conductors, Physical Properties. 42 41 Tapered Armor Rods for ACSR, Physical Properties.. 43 43 Tapered Armor Rods for Stranded Aluminum Conductor, Physical Properties.. 44 BARS RECTANGULAR 58 Aluminum Rectangular Bus Bars, Current Ratings in Amperes. 55 59 Aluminum Rectangular Bus Bars, Physical and Electrical Properties. 56 60 Aluminum Rectangular Bus Bars, Current Ratings in Amperes. 56 20 Copper Rectangular Bus Bars, Current Carrying Capacity in Amperes at 60 Cycles. 21 21 Copper Rectangular Bus Bars, Physical and Electrical Properties 22 CABLES AND WIRES 32 ACSR, Physical and Electrical Characteristics 33 36 ACSR/AW, Physical Characteristics. 39 37 ACSR, Compresto Conductors, Physical and Electrical Properties. 41 34 ACSR Conductors, Physical Characteristics 37 35 ACSR Conductors, Extra-High Strength, Physical Characteristics 38 33 All-Aluminum and ACSR Cable with Armor Rods, Characteristics 35 26 All-Aluminum Cable, Bare, Physical Characteristics, Class A; AA; AAA 29 27 All-Aluminum Cable, Bare, Physical Characteristics, Class B and C.. 30 28 All-Aluminum, High Strength (AAAC) Conductors, Physical Properties. 31 30 All-Aluminum Compresto Conductors, Physical and Electrical Properties 32 31 All-Aluminum, Alloy 5005, Conductors, Physical Properties. 32 29 Aluminum Solid Conductor Wire.31 38 Alumoweld Wire and Strand, Physical and Electrical Characteristics. 41 1 Conversion Chart, Diameters to Conductors and Ultimate Strength.. 1 2 Copper Cable, Concentric-Lay-Stranded Dimensions and Strandings.. 6 4 Copper Cable, Rope Lay-Stranded Dimensions 8 5 Copper Cable and Wire, Bare, Physical Properties. 9 6 Copper Cable, Bare, Electrical Properties. 10 7 Copper Cable, Bare-Indoors, Current Ratings. 11 8 Copper Cable, Bare-Outdoors, Current Ratings. 11 25 Copper, ACSR, and Aluminum Conductors, Current Ratings, Outdoors, 60 Cycles 28 9 Copperweld Conductors, Physical Properties. 12 10 Copperweld Type M, Guy Strands. 12 11 Copperweld Copper Conductors, Physical Properties. 13 3 Copper Wire, Solid, Dimensions, Ultimates. 7 39 Galvanized Steel Guy Wire, Physical Properties 42 CHANNELS 63 Aluminum Channel Conductors, Physical Properties.. 58 64 Aluminum Channel Conductors, Electrical Properties. 58 67 Aluminum Channel Conductors of Uniform Thickness, Physical and Electrical Properties.. 60 68 Aluminum Integral Web Channel Conductors, Physical and Electrical Properties 60 22 Copper Channels, Unventilated, Current Ratings and Physical Properties.. 23 CONDUIT DATA 91 Conduit Elbows, Large Radius 78 92 Conduit Elbows, Standard Radius. 78 94 Conduit, Locknut Spacing and Clearance. 79 www. ElectricalPartManuals. com

TABLE NUMBER PAGE NUMBER 93 Conduit or Tubing, Internal Area. 78 89 Conduit, Rigid Metal. 77 88 Conduit Size for Cable. 77 90 Electrical Metallic Tubing, Weights and Dimensions 77 86 Number of Conductors in Conduit or Tubing 76 87 Number of Conductors in Conduit or Tubing 76 95 Temperature Conversion Chart, Fahrenheit to Centigrade.. 80 96 Temperature Conversion Chart, Centigrade to Fahrenheit.. 81 98 Thread Dimensions, National Course Series 83 97 Thread Dimensions, National Fine Series. 82 99 Thread Dimensions, National Special Pitches. 84 Thread Standard System of Marking 84 HOLLOW SQUARE 61 Aluminum Square Tubular Conductors, Physical Properties 57 62 Aluminum Square Tubular Conductors, Electrical Properties.. 57 23 Copper Square Tube, Unventilated, Current Ratings and Physical Properties.. 24 24 Copper Square Tube, Ventilated, Current Ratings and Physical Properties 26 TUBING 52 Aluminum Tubular Conductors, ASA, Schedule 40, Physical Properties.. 52 53 Aluminum Tubular Conductors, ASA, Schedule 40, Electrical Properties. 52 54 Aluminum Tubular Conductors, ASA, Schedule 80, Physical Properties.. 53 55 Aluminum Tubular Conductors, ASA, Schedule 80, Electrical Properties. 53 56 Aluminum Tubular Conductors, Physical Properties 54 57 Aluminum Tubular Conductors, Electrical Properties.. 54 12 Copper Tubular Conductors, Bare, Current Ratings, Indoors, 60 Cycles.. 14 13 Copper Tubular Conductors, Bare, Current Ratings, Outdoors, 60 Cycles.. 14 14 Copper Tubular Conductors, Physical Properties of Extra-Heavy and Standard Pipe Sizes, High Conductivity, Hard-Drawn15 15 Copper Tube, Type B, Current Ratings and Physical Properties.. 16 16 Copper Tube, Type K, Current Ratings and Physical Properties.. 17 17 Copper Tube, Type L, Current Ratings and Physical Properties 18 18 Copper Tube, Type M, Current Ratings and Physical Properties.. 19 19 Copper Tubular Conductors, Vertical Deflection in Inches, and Deflection Factors. 20 ELECTRICAL DATA 71 Alternating Current Formulae.. 65 72 Amperes in A-C Circuits, Formulae for Determining. 65 Chart Current Carrying Capacity, Approximate Ratio of Outdoor to Indoor. 71 76 Current Carrying Capacities, Relative, Copper, Copper Alloys, and Aluminum. 72 84 Electrolysis Current in Pipe Lines..75 82 Galvanic Series of Metals.. 74 81 Potentials of Metals 74 79 Properties of Aluminum Alloys. 73 77 Properties of Aluminum and Copper Alloys.. 72 78 Properties of Copper Alloys.. 73 80 Properties, Physical Constants of Metals.. 74 69 Proximity Effect, Correction Factor for Buses.. 61 75 Reactance Volts Drop to Neutral 69 Graph Reactance Volts Drop to Neutral. 68 Graph Reactance Volts Drop per Foot of Bus Length, Square and Round Tubular Buses. 70 74 Reactance Spacing Factor, Overhead Line Conductors 67 73 Resistance and Reactance, Formulae for Combining. 66 72 System Diagrams 65 MECHANICAL DATA Chart Beam Formulae for Horizontal Buses.64 85 Coefficients of Linear Expansion for Structural and Bus Materials 75 Chart Expansion of Steel, Copper, and Aluminum with Temperature Changes. 75 84 Power Transmission by Shaft.. 75 Chart Shape Correction Factors for Rectangular Copper Bars.. 62 70 Short Circuit Forces on Buses, Formulae.. 61 Chart Short Circuit Forces on Buses, Maximum 63 83 Time to Change Speed of Rotating Mass.. 75 USEFUL DATA Useful Data for Electrical Construction and Maintenance. 85-87 www. ElectricalPartManuals. com

1990 NATIONAL ELECTRICAL CODE* TABLE 310-16 WIRE & CONDUIT TABLES AMPACITIES OF INSULATED CONDUCTORS RATED 0-2000 VOLTS, BASED ON AMBIENT TEMPERATURE OF 30 C (86 F) RACEWAY OR CABLE OR EARTH TRADE SIZE OF METALLIC CONDUIT OR TUBING BASED ON NEC CHAPTER 9, TABLE 1 FOR 40% FILL AND TABLES 3A, 3B, 3C, 4 & 5B REFER TO NEC CHAPTER 9 FOR MAXIMUM NUMBER OF CONDUCTORS IN TRADE SIZES OF METALLIC CONDUIT OR TUBING. PROPERTIES OF CONDUCTORS MUST AGREE WITH NEC CHAPTER 9 TABLE 8. DIMENSIONS OF INSULATED CONDUCTORS PER NEC CHAPTER 9 (TABLE 5 FOR COPPER TABLE 5A FOR ALUMINUM THW, THHN, XHHW) (UNDERLINE INSULATION TYPE INDICATES DRY AND DAMP LOCATION ONLY RATINGS) THHN IS RATED 90 C IN DRY LOCATION Table 310-16 Ampacity Insulated COPPER 20 20 25 25 35 40 50 55 65 75 85 (100 ) 95 (100 ) 100 (110 ) 110 115 (125 ) 130 (125 ) 130 (150 ) 150 (150 ) 150 (175 ) 170 (175 ) 175 (200 ) 195 (200 ) 200 225 230 255 260 285 290 310 320 335 350 380 380 420 430 460 475 490 520 CU WIRE SIZE AWG kcmil 14 12 10 8 #6 #4 #3 #2 #1 1/0 2/0 3/0 4/0 250M 300M 350M 400M 500M 600M 700M 750M 800M 900M 75 C (167 F) THHW, THW RHW, USE Conduit Conduit 3W 3Ø4W 1 2 1 2 1 2 3 4 1 1 1 1 4 1 1 4 1 1 4 1 1 2 1 1 2 2 2 2 1 2 2 1 2 2 1 2 3 3 3 3 1 2 3 1 2 3 1 2 4 1 2 1 2 1 2 1 1 1 1 4 1 1 4 1 1 4 1 1 2 2 2 2 2 1 2 2 1 2 3 3 3 3 1 2 3 1 2 4 4 4 5 CU WIRE SIZE AWG kcmil #14 #12 #10 #8 #6 #4 #3 #2 #1 1/0 2/0 3/0 4/0 250M 300M 350M 400M 500M 600M 700M 750M 800M 900M 75 C (167 F) THWN, XHHW Conduit Conduit 3W 3Ø4W 1 2 1 2 1 2 1 2 3 4 1 1 1 1 1 4 1 1 4 1 1 2 1 1 2 2 2 2 2 1 2 2 1 2 3 3 3 3 1 2 3 1 2 3 1 2 1 2 1 2 1 2 3 4 3 4 1 1 1 4 1 1 4 1 1 2 1 1 2 2 2 2 2 1 2 2 1 2 3 3 3 3 1 2 3 1 2 4 4 4 90 C (194 F) FEP(14-2), THHN CU WIRE FEPB(14-8), XHHW SIZE AWG Conduit Conduit kcmil 3W 3Ø4W #14 #12 #10 #8 #8 #4 #3 #2 #1 1/0 2/0 3/0 4/0 250M 300M 350M 400M 500M 600M 700M 1 2 1 2 1 2 1 2 3 4 1 1 1 1 1 4 1 1 4 1 1 2 1 1 2 2 2 2 2 1 2 2 1 2 3 3 3 1 2 1 2 1 2 3 4 3 4 1 1 1 4 1 1 4 1 1 2 1 1 2 2 2 2 2 1 2 2 1 2 3 3 3 3 1 2 3 1 2 Table 310-16 Ampacity Insulated ALUMINUM 35 40 45 50 60 65 75 75 85 90 (100 ) 100 (100 ) 100 (110 ) 115 (110 ) 120 (125 ) 135 (125 ) 135 (150 ) 150 (150 ) 155 (175 ) 175 (175 ) 180 (200 ) 205 205 (200 ) 230 230 250 255 270 280 305 310 340 350 375 385 420 435 AL WIRE SIZE AWG kcmil 8 #6 #4 #2 #1 1/0 2/0 3/0 4/0 250M 300M 350M 400M 500M 600M 700M 750M 75 C (167 F) THHW, USE THW Conduit Conduit 3W 3Ø4W 3 4 3 4 1 1 1 1 4 1 1 4 1 1 2 1 1 2 2 2 2 2 1 2 2 1 2 3 3 3 3 3 4 1 1 1 1 4 1 1 2 1 1 2 2 2 2 2 1 2 2 1 2 3 3 3 3 1 2 3 1 2 3 1 2 AL WIRE SIZE AWG kcmil #8 #6 #4 #2 #1 1/0 2/0 3/0 4/0 250M 300M 350M 400M 500M 600M 700M 750M Conduit Conduit 3W 3Ø4W 1 2 3 4 3 4 1 1 1 4 1 1 4 1 1 4 1 1 2 1 1 2 2 2 2 2 1 2 2 1 2 3 3 3 3 4 3 4 1 1 1 4 1 1 4 1 1 2 1 1 2 2 2 2 2 1 2 2 1 2 2 1 2 3 3 3 1 2 3 1 2 AL WIRE SIZE AWG kcmil #8 #4 #2 #1 1/0 2/0 3/0 4/0 250M 300M 350M 400M 500M 600M 700M 750M Conduit Conduit 3W 3Ø4W www. ElectricalPartManuals. com 75 C (167 F) XHHW 90 C (194 F) THHN XHHW 3 4 3 4 1 1 1 4 1 1 4 1 1 2 1 1 2 1 1 2 2 2 2 2 1 2 2 1 2 3 3 3 3 4 1 1 1 4 1 1 4 1 1 2 1 1 2 2 2 2 2 1 2 2 1 2 2 1 2 3 3 3 1 2 3 1 2

POWER SYSTEMS, INC. ANDERSON 210 N. Allen St. Centralia, MO 65240 USA Phone: 573-682-5521 Fax: 573-682-8714 e-mail: hpscontact@hps.hubbell.com http://www.hubbellpowersystems.com NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice. Copyright 2003 Hubbell / Anderson Printed in USA AEC-41 Rev A www. ElectricalPartManuals. com