ALPHA SACX Plus 0307, 0300 LEAD FREE WAVE SOLDER & REWORK ALLOY

Similar documents
ALPHA SACX Plus 0807/SACX Plus 0800 LEAD FREE SOLDER ALLOY

ALPHA Vaculoy SAC300,305,350,400,405 Lead Free Wave Solder Alloy

ALPHA FLUITIN 1535 No Clean Cored Solder wire

ALPHA TELECORE HF-850 HALOGEN-FREE, HALIDE-FREE, NO-CLEAN, CORED SOLDER WIRE

ALPHA WS-809 WATER SOLUBLE SOLDER PASTE

ALPHA PoP33 Solder Paste No Clean, Zero Halogen, Lead-Free Solder Paste for Package on Package Assembly

ALPHA EF-8800HF Halogen-Free, High Reliability, Alcohol Based No-Clean Wave Soldering Flux for Thick Board Applications

ALPHA EF-6100 Low Solids, High Reliability, Alcohol Based Wave Soldering Flux for Lead- Free and Tin-Lead Applications

ALPHA EF-6100P Low-Solids, High-Reliability, Alcohol-Based Wave Soldering Flux for Lead- Free & Tin-Lead Applications

ALPHA Vaculoy SAC300,305,400,405 LEAD FREE WAVE SOLDER ALLOY

ALPHA OM-5300 TIN-LEAD PASTE FOR MIXED ALLOY ASSEMBLIES

ALPHA OM338-T Ultra-Fine Feature, Lead-Free Solder Paste

ALPHA LUMET JP510 Lead Free, Zero Halogen, No Clean Solder Paste for Jet Printing with SAC305 alloy

ALPHA OM-338-PT Fine Feature, Zero Halogen, Pin-Testable Lead-Free Solder Paste

ALPHA CVP-360 FINE FEATURE, PIN-TESTABLE, LEAD-FREE SOLDER PASTE

ALPHA OM-353 Solder Paste No-Clean, Low-Silver, Lead-Free, Zero-Halogen, ROL0, Ultra-Fine Feature Print & Air Reflow Capable Solder Paste

ALPHA ROSIN FLUX 800 (RF-800) NO CLEAN FLUX

ALPHA OM-340 No-Clean Lead-Free, Fine Feature, Zero Halogen, Low HIP, Highly Pin-Testable

ALPHA CVP-390 NO-CLEAN, LEAD-FREE SOLDER PASTE ZERO-HALOGEN, LOW VOIDS, FINE FEATURE, EXCELLENT PIN TEST PERFORMANCE, SAC305, SAC405, & LOW AG CAPABLE

ALPHA CVP-390 NO-CLEAN, LEAD-FREE SOLDER PASTE ZERO-HALOGEN, LOW VOIDS, FINE FEATURE, EXCELLENT PIN TEST PERFORMANCE, SAC305, SAC405, & LOW AG CAPABLE

ALPHA SACX Plus Product Guide

DESCRIPTION FEATURES & BENEFITS

ALPHA SACX Plus 0307 NEW! Product Guide

Upgrading to ALPHA SACX Plus 0307

ALPHA PV-300 Dispensing Solder Paste

SN100C Technical Guide

PRODUCT PROFILE ELECTROLOY LEAD FREE BAR

the product: A lead-free wave solder alloy that delivers high yield, fast throughput and economy. Vaculoy SACX0307 product guide alpha SM809 PRINT 2

AN Recommendations for PCB assembly of DSN1006. Document information

SAC305 Lead Free Solder Wire (RA) Technical Data Sheet

ALPHA EF-8800HF. Wave Solder Flux. Product Guide

SnAg3.5 (CLF5013) Halide Free No Clean Core Wire

DSP 798LF (Ecolloy ) LEAD FREE WATER SOLUBLE SOLDER PASTE

Sn60Pb40 No Clean Solder Wire Technical Data Sheet

Sn63Pb37 No Clean Solder Wire Technical Data Sheet

SnAg3.0 (CLF5013) Halide Free No Clean Core Wire

DSP 615D (Sn63/Pb37) NO CLEAN DISPENSING SOLDER PASTE

AN Recommendations for PCB assembly of DSN Document information

Lead Free No Clean Solder Paste 4900P Technical Data Sheet 4900P

SnCu Based Alloy Design for Lower Copper Dissolution and Better Process Control

Increased Efficiency & Brightness Increased Reliability & Lifetime Reduced Cost/Lumen Over Lifetime

PCB Mount VIA Soldering Guidelines

Sn623-5T-E SOLDER PASTE

PERSENDA s.n.c MONCALIERI (IT)

Welcome to the Real World of Lead Free Soldering

ARALDITE 2011 A/B (AW 106 Resin/Hardener HV 953) MULTI-PURPOSE EPOXY ADHESIVE

ARALDITE AV 119 EPOXY ADHESIVE PASTE

Welcome to SMTA Brazil Chapter Brook Sandy-Smith Dr. Ron Lasky Tim Jensen

Manufacturing of electronic equipment

Lead- free Alloys for Wave and SMT Assembly: Assembly with Two Alloys

Package Mounting Guide SOP/QFP

General Information on the Assembly and Solder Pad Design of the DRAGON Family Application Note

Hot nitrogen for wave soldering A new innovation for increasing quality & productivity of wave soldering machines

Package Mounting Guide BGA

Platform Flash PROM VOG48 Package Lead Finish Conversion to NiPdAu

PCB Technologies for LED Applications Application note

Typical Analysis Sn Ag Cu Pb Sb Bi In As Fe Ni Cd Al Zn Au

Indium facility at the Auby smelter

DSP 798LF (Sn/Ag/Cu) LEAD FREE WATER SOLUBLE SOLDER PASTE

3M PCB Connector.100 Four Row 3400 Series

DSP 875 (Sn/Ag/Cu) LEAD FREE NO CLEAN SOLDER PASTE

Lead-free soldering materials, some considerations. Presented at FHI conference, Gorinchem November 2005

DISCONTINUED. Replaced by

DSP 792 (Sn63/Pb37) WATER SOLUBLE SOLDER PASTE

DSP 699 (Sn63/Pb37) SUPER ACTIVITY- HALOGEN FREE NO CLEAN SOLDER PASTE

ALPHA EF-8300 product guide

3M Pin Strip Header 2 mm and 2 mm x 2 mm Straight, Surface Mount 951 Series

Becoming Lead Free. Automotive Electronics. Antonio Aires Soldering Technical Specialist Visteon Corporation - Palmela Plant

Reliability Tests Report

Lead Free Solder Bar

Effects of SAC Alloy Copper Dissolution Rates on PTH Processes: Cost and performance justify use of certain alternatives to SAC305/405

3M MetPak 2-FB Power Socket 2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series

3M MetPak 2-FB Power Socket 2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series

Development of a Lead-Free Alloy for High-Reliability, High-Temperature Applications

A recognised ability Industrial Thessco Group in the field of brazing Products Range in Europe Brazing Products alloys THESSCO LIMITED

DISCONTINUED. 3M PC Card Header Single Slot, No Ejector. Physical. Electrical. Environmental. UL File No.: E68080

3M MetPak 2-FB Socket

3M MetPak 2-FB Socket 2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, Right Angle MP2 Series

Araldite AV / Hardener HV

DSP 865A (Sn/Ag/Cu) LEAD FREE NO CLEAN SOLDER PASTE

ARALDITE AW 136 Resin Hardener HY 5049 EPOXY LAMINATING ADHESIVE

Transcription:

DESCRIPTION ALPHA SACX Plus 0307 is a next generation lead-free alloy suitable for use as a replacement for SnPb, SAC305 and other low silver SAC alloys including the original SACX 0307 in wave solder, lead tinning and rework processes. SACX Plus 0307 has been engineered for improved copper dissolution performance during the long hot exposure times associated with rework and lead tinning. The SACX Plus 0300 variant is used as a replenishment alloy in solder baths with elevated copper levels. As with all Alpha Metals bar solder, Alpha s proprietary Vaculoy manufacturing process is used to remove certain impurities, particularly oxides. The product is further enhanced with the addition of other materials designed to further reduce drossing, increase wetting speed and force and improve joint cosmetics. FEATURES & BENEFITS Features: RELIABILITY Comparable to higher Ag alloys (i.e. SAC305) in thermal fatigue resistance, lap shear and pin pull performance. YIELD Comparable to SAC305, superior performance for hole fill and SMT related defects compared to Ag free alloys like Sn99.3/Cu0.7. COPPER EROSION Low erosion during long rework exposure times. DROSS GENERATION Lowest in class due to the Vaculoy process in conjunction with the addition of a dross reducing agent. Benefits: Lowers Total Cost of Ownership due to the lower material cost, high yields and low dross generation. Excellent mechanical reliability. Gives very good hole fill and drainage due to the lower surface tension attributed to Ag. Reduces erosion of copper plating during rework improving assembly reliability. Delivers good performance across a range of flux technologies. The proprietary Vaculoy process is a highly effective method for removing included oxides from solder. This is extremely important because included oxides generate excessive drossing and increase the viscosity of the solder. Solder with higher viscosity can result in increased soldering defects (i.e. solder bridging). APPLICATION ALPHA SACX Plus 0307 is suitable for wave soldering, lead tinning and reworking through hole and surface mount components in a lead-free process. It is suited to single side and relatively complex, dual sided mixed technology boards. A solder pot temperature of 255-265 C (491 509 F) is recommended with a contact time 2.3 3.5 seconds. For suitable wave solder fluxes, see our selector guide. Lead free Reclaim services including dedicated lead free containers is also available, consult your local sales office.

AVAILABILITY ALPHA SACX Plus 0307 is available in 1kg (2.2lb) bar, chunks, feeder ingots and solid wire. SAFETY Consult the SDS for all safety information. AlphaAssembly.com. The most recent version of the SDS is available from TECHNICAL SPECIFICATION Complies with all requirements of RoHS Directive (Article 4.1 of the European Directive 2011/65/EU). Alloy specification for Maximum Lead (Pb) Content = 0.07% SACX Plus 0307 is also available is an Ultra Low Lead (ULL) version which contains a maximum of 0.05% Pb. All alloy properties remain the same for SACX Plus 0307 ULL. Material Property Units Vaculoy SACX Plus 0307 Solidus Celsius 217 Liquidus Celsius 228 Hardness HV 14.1 Density g/cc 7.33 Specific Heat Capacity J/kg C 0.17 Stress at MAX Load (N/mm 2 ) Mean 29.5 Std Dev 0.64 Elongation at failure (%) Mean 21.8 Std Dev 8.8 Thermal Expansion Coefficient (30-100C)/C x 10-5 1.79 (100-150C)/C x 10-5 2.30 Silver Content % 0.3 +0.15/-0.05 Copper Content % 0.70 +/- 0.1 Lead Content % Max 0.07%

RECOMMENDED WAVE SOLDER PROCESS SETTING Wave Configuration Process Parameter Suggested Process Settings Pot Temperature 255-265 Celsius (491-509 F) Conveyor Speed 1.0-1.5 m/min (3.3-5 ft/min) Single Wave Contact Time 2.3-2.8 seconds Wave Height 1/2 to 2/3 of board thickness Dross Removal Once per 8 hour run time Copper Check Every 8,000 boards until 40,000 Pot Temperature 255-265 Celsius (491-509 F) Conveyor Speed 1.0-1.5 m/min (3.3-5 ft/min) Dual Wave Contact Time 3.0-3.5 seconds Wave Height 1/2 to 2/3 of board thickness Dross Removal Once per 8 hour run time These are general guidelines which have proven to yield excellent results. However, depending upon your equipment, components and circuit boards, your optimal settings may be different. In order to optimize your process, it is recommended to perform a design experiment, optimizing the most important variables (i.e. amount of flux applied, conveyor speed, topside preheat temperature, solder pot temperature, board orientation, etc.). MANAGEMENT OF COPPER LEVELS IN THE SOLDER BATH Copper should be controlled in the solder bath between 0.7% and 1.0%. Management of the copper level in the wave solder bath is critical to ensure low defects in the soldering process. There is a tendency for the copper levels within a high tin bearing alloy wave solder bath to increase due to copper dissolution from the PCB. This effect increases based on the level of exposed copper on the assembly, as in the case of boards using OSP pad finishes. Studies have shown a typical leaching rate of 0.01% Cu per 1000 boards. As each process is unique, this rate should be viewed as a guideline only. It is recommended that the copper is controlled at between 0.7% and max 1.0% for SACX Plus 0307 alloy. If the copper levels are higher than 1.0% then this will increase the liquidus temperature which in turn may mean that the solder bath temperature has to be increased to maintain the process yields. The copper levels in the bath can be controlled by means of adding SACX Plus 0300 to the wave solder pot. It may be the case that equilibrium can be attained by continuing with SACX Plus 0300 additions as the only means of solder top up, however each process is unique and we would recommend regular analysis of the solder bath so that good control of copper can be maintained. This analysis service is available from Alpha; contact your local sales office for details.

RECOMMENDED ACTION LEVELS FOR WAVE SOLDER IMPURITIES Please find below a list of recommended action levels for wave solder bath impurities. For information of specific action plans to bring your solder bath back to an acceptable condition please contact your local sales office. Element ACTION Levels % Sn BAL No Action level. Notes Pb 0.10 RoHS Directive 2011/65/EU states a maximum Lead content of 0.1% As 0.03 Levels greater than 0.03% can cause de-wetting. Cu 1.0 Bi 0.20 Zn 0.003 Fe 0.02 Ag 1.0 Sb 0.20 Ni 0.05 Cd 0.003 Al 0.002 SACX Plus 0307 is tolerant to copper levels up to 1.0%; SACX Plus 0300 copper free should be added to maintain copper levels. Levels above 1.0% may cause more bridging. Lead Free alloys are tolerant to Bi up to 1.0%, however if levels above 0.20% are detected this indicates some contamination issues that should be investigated Levels greater than 0.003% may cause increased bridging and icicling, as well as, increased drossing rates in the solder bath. Greater than 0.02% Iron can be an indicator of pot erosion and may cause gritty joints and the formation of FeSn2 IMC needles that can cause bridging. Silver levels of 4% are used in some SAC alloys, however if the levels in SACX 0307 rise above 1% then some investigations should be held to establish the cause. Lead Free alloys are tolerant to Sb up to 1.0%, however if levels above 0.20% are detected this indicates some contamination issues that should be investigated Levels greater than 0.05% may start to slow wetting and may reduce hole fill. Evaluate soldering performance if levels exceed 0.05%. Locate and eliminate source of high Ni levels. RoHS Directive 2011/65/EU states a maximum Cadmium content of 0.01%. Levels of 0.003% may cause higher level of bridging and icicling. Levels greater than 0.002% may cause higher levels of bridging and icicling and a greater level of surface oxidation in the solder bath.

CONTACT INFORMATION To confirm this is the most recent issue, please contact Alpha Assembly Solutions AlphaAssembly.com North America 300 Atrium Drive Somerset, NJ 08873, USA 800.367.5460 Europe Unit 2, Genesis Business Park Albert Drive Woking, Surrey, GU21 5RW, UK 01483.758400 Asia 8/F., Paul Y. Centre 51 Hung To Road Kwun Tong, Kowloon, Hong Kong 852.3190.3100 Also read carefully warning and safety information on the Safety Data Sheet. This data sheet contains technical information required for safe and economical operation of this product. READ IT THOROUGHLY PRIOR TO PRODUCT USE. Emergency directory assistance Chemtrec 1-800 - 424-9300. DISCLAIMER: All statements, technical information and recommendations contained herein are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed. No statement or recommendation shall constitute a representation unless set forth in an agreement signed by officers of seller and manufacturer. NO WARRANTY OR MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS MADE. The following warranty is made in lieu of such warranties and all other warranties, express, implied, or statutory. Products are warranted to be free from defects in material and workmanship at the time sold. The sole obligation of seller and manufacturer under this warranty shall be to replace any product defective at the time sold. Under no circumstances shall manufacturer or seller be liable for any loss, damage or expense, direct or consequential, arising out of the inability to use the product. Notwithstanding the foregoing, if products are supplied in response to a customer request that specifies operating parameters beyond those stated above, or if products are used under conditions exceeding said parameters, the customer by acceptance or use thereof assumes all risk of product failure and of all direct, indirect and consequential damages that may result from use of the products under conditions, and agrees to exonerate, indemnify and hold harmless MacDermid Incorporated therefrom. No suggestion for product use nor anything contained herein shall be construed as a recommendation to use any product in infringement of any patent rights, and seller and manufacturer assume no responsibility or liability for any such infringement. Registered Trademark of MacDermid Performance Solutions. Trademark of MacDermid Performance Solutions. Platform Specialty Products Corporation and its subsidiaries 2016.