Page 89 16 Richmond Street Clifton, NJ 07015 (973) 772-6262 www.lamartcorp.com 100 1 mil clear polyester film coated on General purpose transparent polyester. 25 35 2.0 100 one side with an acrylic. Used for splicing, binding and wrapping, label protection. 101 1 mil clear polyester film coated on Particularly useful as an over laminating film 25 20 2.0 100 one side with a high performance for protection of labels where the tape is acrylic. exposed to oils and solvents. 108 5 mil clear polyester film coated on Bundling and binding applications where 100 32 6.0 150 one side with an acrylic. extra strength and puncture resistance are required. 150-10 10 mil UHMW film with acrylic Heavy-duty UHMW polyethylene film with an 60 28 11.8 450 aggressive pressure sensitive designed for applications where a slick, wear resistant surface is needed. 150-3 3 mil UHMW film with acrylic UHMW has a low coefficient of friction, 18 35 4.8 270 offering excellent abrasion resistance for sound damping applications in the appliance and transportation industries. 150-5 5 mil UHMW film with acrylic Ideal choice for sound damping applications 30 40 6.8 300 in appliance and conveyance requirements where a slick, wear resistant surface is needed. 211-L 1 mil aluminum foil coated on one Useful for sealing out dust and dirt and an 6 37 2.0 5 side with an acrylic, excellent choice for tamper evident seals on all types of containers. 213 3 mil aluminum foil coated on one Dead soft aluminum foil tape is an ideal 26 40 4.3 5 side with acrylic, provided in moisture and vapor barrier, and is particularly effective for heat reflective applications. 213-L 3 mil dead soft aluminum foil coated Designed to be used where die cut foil parts 26 40 4.3 5 on one side with an acrylic, require exceptional chemical resistance. 213-MX 3 mil aluminum foil coated on one The preferred commercial, military and 28 50 4.5 5 side with an acrylic, private jet solution for aerospace paint provided in stripping applications. 213-ML 3 mil aluminum foil coated one side Provides a premium die-cut solution for all 26 50 5.0 5 with chemical resistant acrylic military, commercial and private aircraft, MRO paint stripping requirements. 214 5 mil aluminum foil coated on one Can serve as a heat reflective or moisture 50 40 6.3 15 side with an acrylic, barrier material in numerous appliance and provided in transportation applications. 214-L 5 mil aluminum foil coated on one An excellent product for heat reflection and 50 40 6.3 15 side with acrylic PSA, supplied on a for use in the appliance industry. Often used to repair and patch tears in aircraft and truck trailers skins. 215 2 mil aluminum foil coated on one Useful for sealing out dust and dirt for 12 40 2.8 2.5 side with acrylic, provided in underground cable and duct sealing applications. 2012 PSTC Tape Products Directory 89
Page 90 PDFd : 34722A : even (cont.) 215-L 2 mil aluminum foil coated on one Provides a mechanical fastener designed to 12 40 2.8 2.5 side with acrylic PSA, supplied on a hold wires and cooling coils in appliances. 218-L 8 mil aluminum foil coated on one A heavy duty foil used in critical barrier 70 32 9.5 15 side with acrylic PSA on a release requirements of vinyl coated wires in the liner. appliance industry. 222-L 2 mil aluminum foil coated on one Used as a heat reflective and barrier wrap in 12 44 3.0 5 side with silicone PSA, supplied on a applications exposed to demanding high temperature environments and as a tape to seal automotive air bags. 243-L 3 mil lead foil coated on one side Often used for X ray plate masking and as a 10 35 4.0 15 with an acrylic, supplied on radiation barrier. An excellent choice as a a mask for electroplating and chemical milling 243-LR 3 mil lead foil coated on one side Often used X ray plate masking and as a 10 45 4.0 15 with a rubber, supplied on a radiation barrier. An excellent choice for die cut parts used for electroplating and chemical milling 245-L 5 mil lead foil coated on one side Designed when conformability is required in 18 35 6.0 15 with an acrylic, supplied on applications that require electrical and a thermally conductive properties 245-LR 5 mil lead foil coated on one side Used when conformability is required in 18 60 6.0 15 with a rubber, supplied on a applications demanding electrical and thermally conductive properties 249-L 10 mil lead foil tape coated on one Used in high temperature and critical 35 60 11.0 15 side with an acrylic, applications for the sealing of radioactive canisters and as a shielding barrier for environments involving radiation 249-LR 10 mil lead foil tape coated on one Used in the sealing of radioactive canisters 35 45 11.0 15 side with a rubber. This and as a shielding barrier for environments tape is involving radiation 326.00035" aluminum foil laminated to 1 High temperature reflective tape designed 25 44 1.8 130 mil polyester, coated on one side with for under hood wire harness wrap for cars, an acrylic. trucks or anywhere protection from radiant heat is required. 390 1 mil aluminum foil laminated to glass Designed for high temperature automotive 90 50 6.5 5 cloth, coated on one side with a and aerospace applications and plasma silicone spray or high temperature military specifications. 516-L 1.6 mil aluminum foil with acrylic Widely used for seam sealing and patching 13 75 3.2 5 of foil and FSK-faced insulation applications. 520 2 mil aluminum foil coated on one Provides an economical solution for joining 12 90 3.3 3.5 side with acrylic, provided in and sealing of laminated fiberglass blankets, ducts, joints and seams for both rigid and flexible HVAC constructions. 520-L 2 mil aluminum foil coated on one Provides an economical solution for joining 17 75 3.5 5 side with acrylic, supplied and sealing laminated fiberglass blankets, on a ducts, joints and seams for both rigid and flexible constructions. 601 1 mil silver metalized polyester Designed as a sensing tape where 24 44 2.0 130 coated on one side with acrylic automatic equipment is used in sorting, counting, or identifying roll splices and end of rolls. 90 2012 PSTC Tape Products Directory
Page 91 (cont.) 602 2 mil silver metalized polyester Ideal choice for reflective shielding; industrial 40 32 3.0 100 coated on one side with acrylic & graphic art applications; decorative trim, automotive trim, nameplates, electric appliances and advertising displays. 604 2 mil gold metalized polyester coated Produced to meet post splicing movie film 18 32 2.0 100 on one side with acrylic requirements. Widely used as moisture barrier in applications requiring low MVTR. 881-L 1 oz copper foil coated on one side Electromagnetic and radio frequency 25 40 3.0 6 with an acrylic, supplied on shielding on microwave components, cables, a antennas, motors, or cabinets. 882-L 1 oz copper foil coated on one side Construction permits conductivity along, as 25 35 3.5 5 with a conductive acrylic, well as through, tape and providing an ideal solution for circuit repair on PC boards. 883-L 1 oz copper foil coated on both sides In lay-up repair and prototype work where 20 30/30 3.4 5 with a conductive acrylic, is required to bond two surfaces, and conductivity is required along, as well as through, the tape. 892-L 2 mil aluminum foil coated on one Applications requiring electromagnetic and 15 35 3.6 5 side with a conductive acrylic radio frequency shielding on microwave, components, cables, antennas, motors, or cabinets and as a static drain. 905-L 2 mil stainless steel annealed foil Used in nuclear, marine and food processing 150 45 3.8 1 coated on one side with an acrylic applications where a non-magnetic and non, corrosive tape is required. 1101-60 2 mil high performance acrylic Bonding and assembly, foam fabrication, N/A 40 2.0 N/A gasketing, anti-squeak and rattle 1210 2 mil unsupported conductive acrylic Z axis conductive tape is used to laminate N/A 40 2.0 N/A transfer tape conductive substrates to make EMI and RFI shielding materials 15137 2.6 mil high peel, aggressive acrylic Bonding of plastic composite components, N/A 85 2.6 N/A ether and ester polyurethane foams, fabrics and metals 16588 3 mil high performance LSE acrylic Assembly and bonding of low-surface N/A 100 3.0 N/A energy (LSE) materials 16591 2 mil, low-fogging, high performance Assembly, foam fabrication, gasketing, anti- N/A 85 2.0 N/A acrylic squeak and rattle applications. 16717 4 mil high performance LSE acrylic Bonding coated cloth and tensile membrane N/A 110 4.0 N/A structures, as well as a wide variety of lowsurface energy (LSE) materials 16718 4.5 mil high peel, aggressive acrylic Bonding of plastic composite components, N/A 100 4.5 N/A ether and ester polyurethane foams, fabrics and metals 16719 High performance LSE acrylic Bonding and assembly of low-surface 8 85 4.5 N/A, double coated on a.5 mil energy (LSE) plastics, foams and glass PET carrier 1701 1/32" black polyethylene foam, Bond decorative trim, identification tags, N/A 60/60 34 N/A coated on both sides with an acrylic signs and nameplates 1702 1/32" white polyethylene foam, Bonding of decorative badging, interior and N/A 60 31 N/A coated on both sides with an acrylic exterior trim. 2012 PSTC Tape Products Directory 91
Page 92 PDFd : 34722A : even (cont.) 1703 1/16" black polyethylene foam, Bond larger components with uneven N/A 70/70 65 N/A coated on both sides with an acrylic surfaces, such as signs, nameplates and dispensers. Also used for sound and vibration control 1704 1/16" white polyethylene foam, Bonding of decorative badging, interior and N/A 60 31 N/A coated on both sides with an acrylic exterior trim. 2101-60 Aggressive acrylic, double- Assembly, bonding and sealing of 8 90 3.5 N/A coated on a conformable.5 mil PET components, fabrics, foams and plastics carrier 396-L High temperature, high tack acrylic Wire harness and heat reflective wrapping N/A 50 4.5 N/A coated on a heat reflective aluminum/glass cloth laminate 891-L Dead soft aluminum foil coated with a EMI/RFI shielding on component enclosures 15 35 3.8 N/A thermosetting acrylic. and connectors for static dissipation A-10-PS.00035 mil aluminum foil laminated to EMI and RFI shielding of electronic N/A 32 2.5 70.00048 polyester film and coated on components one side with an acrylic A-25-50DK.00035 aluminum foil laminated to a 2 Used in the manufacture of medical N/A 50 3.2 N/A mil polyester film and coated on one grounding pads side with a rubber A-35-90-68.00035 mil aluminum foil laminated to EMI and RFI shielding of electronic N/A 32 5.0 90 a 3 mil polyester film and coated on components one side with an acrylic A-40-90-68 1 mil aluminum foil laminated to a 3 EMI and RFI shielding of electronic N/A 32 5.6 90 side with an acrylic Alloygrip I 3.5 mil polyethylene film coated on Used to protect eyeglasses during the lens N/A 26 4.4 N/A one side with an acrylic generation process C-13-PS.0007 mil copper foil laminated to a EMI and RFI shielding of electronic N/A 40 2.3 N/A 0.5 mil polyester film and coated on components one side with an acrylic C-20-PS 1.4 mil copper foil laminated to a.5 Acts as a heavy duty shielding tape for EMI N/A 32 3.1 N/A mil polyester film and coated on one and RFI applications side with an acrylic C-38-PS.0007 mil copper foil laminated to a 3 EMI and RFI shielding of electronic N/A 32 4.8 95 side with an acrylic C-65-PS.014 mil copper foil laminated to a 5 EMI and RFI shielding of electronic N/A 32 7.6 N/A side with an acrylic LF-300-S-TC 3 mil soft solid bright aluminum foil Top coated, printable surface makes this N/A 32 4.0 N/A coated on one side with an acrylic tape an ideal choice for appliance labels, dials, or control panels. LFM-200-HT-C 1.6 mil aluminum foil coated on one Top coated, printable surface makes this N/A 32 2.6 N/A side with an acrylic tape an ideal choice for appliance labels, dials, or control panels. LM-200-NTC 2 mil polyester film coated on one May be used in all applications that are N/A 42 2.9 N/A side with an FDA approved acrylic required to come in contact with food processing and contact regulations. LSV-800 7.5 mil plasticized PVC - No The "cling" qualities of the PVC offer N/A N/A 8.0 N/A adhesion to most surfaces in graphic arts applications 92 2012 PSTC Tape Products Directory
Page 93 (cont.) M-1000-TC 1 mil bright silver metalized polyester Top coated, printable surface offers a N/A 32 1.1 N/A film coated with an acrylic solution for many applications in the graphic arts industry MHS-050 0.5 mil polyester film coated on one Offers a heat fusible binder tape and for N/A N/A 1.5 N/A side with a heat sealable polyester applications requiring a moisture barrier MHS-100 1 mil polyester film coated on one This material is used in Type "T" Navy N/A N/A 1.0 N/A side with a heat sealable polyester cable, and offers and excellent moisture barrier MHS-150 1.5 mil polyester film coated on one Used as a heat fusible binder tape and for N/A N/A 1.6 N/A side with a heat sealable polyester applications requiring a moisture barrier PFP-575.0007 aluminum foil laminated on Provides a moisture and oxygen barrier for N/A 32 2.5 N/A both sides with a.0006 polypropylene applications requiring a label in harsh film and coated on one side with an environments acrylic SW-100 1 mil polyester film coated on one Used for winding motors, capacitors, and 22 12 1.2 N/A side with an acrylic transformers. SW-200 2 mil polyester film coated on one Sound damping and moisture barrier for 40 12 2.3 N/A side with an acrylic cable assemblies T-18-53 1 mil flouropolymer film laminated to Used as a protective and sheeting tape in 27 32 1.0 160 an 8 mil white PVC and coated on plating rooms for the lining of chutes and one side with an acrylic, hoppers. TF-12-60DK 1 mil flouropolymer film laminated to Frequently used as a low slip surface for 13 32 4.0 5 2 mil aluminum foil, coated on one high temperature applications. side with a high temperature acrylic, Waxgrip 2 mil clear LDPE coated on one side Tape is used to cover glass and plastic 8 16 2.8 325 with an acrylic lenses during processing to protect the lenses. 2012 PSTC Tape Products Directory 93