Flushing Services
PRODUCTION Proserv Flushing Unit - Offshore Proserv offers a wide range of various flushing units with diesel-engine drive and electrical drive options for sale and hire. We have different pump units for pure flushing or for flushing and pressure testing. We can also manufacture bespoke solutions for specific client requirements. Certified to ISO 4406:1999, NAS 1638 and SAE 4059D standards Cleanliness verification to the appropriate standard All stainless steel construction Wide range of pressure and flow combinations Suitable for low viscosity water and oil based fluids Multi voltage supply Dimensions (LxWxH) Max discharge pressure Max flow rate Suction connection Discharge connection Utilities required 2000 x 1000 x 1825 m 1000 kg 20 Kw 440v/690 volt 50/60 Hz Water, oil based and non-lubricated (for other liquids or acids please contact us) 345 bar 34 l/min @ 345 bar 3 / 4 BSP 1 / 2 BSP Water for cooling, filters : 1 HC 9800FKP8H 1 HC9100FKP8H Offshore zone 1 DNV 2.7-1
Proserv Flushing Unit - Proserv offers a wide range of various flushing units with diesel-engine drive and electrical drive options for sale and hire. We have different pump units for pure flushing or for flushing and pressure testing. We can also manufacture bespoke solutions for specific client requirements. Certified to ISO 4406:1999, NAS 1638 and SAE 4059D standards Cleanliness verification to the appropriate standard Atex compliant All stainless steel construction 20 Kw electric motor Multi fluids capability Reservoir with built in suction filter, return filter and visual level and temperature indicator Dimensions (LxWxH) 1600 x 860 x 1500 m 700 kg Electric 30 Kw 380-690 Volt, 50 Hz Harben type P8x20 Pressure pump Haskel ASF 150 Max discharge pressure Max flow rate Suction Connection Discharge Connection Utilities Required Recommending Water, oil based and non-lubricated liquids (for other liquids or acids please contact us) 345 bar (Harben) 1035 bar (Haskel) 48 l/min @ 50 bar, 35 l @ 345 bar (Harben) 0-1.2 l/min (Haskel) 3 / 4 BSP 1 / 2 BSP Fresh water for cooling. Filters: 1 HC9800FKP4H, 1 HC9100FKP8H For Haskel use, recommended 60 strokes pr min
DRILLING/PRODUCTION/SUBSEA Flushing Services - Hydraulic Oil-Based Proserv offers trained field technicians to perform a variety of filtration and flushing services applicable to pre-commissioning of new equipment as well as maintenance or refurbishment of existing equipment that will keep your topside and subsea equipment operating at peak performance, reducing the potential for premature failure. We provide a variety of diesel-engine drive and electrical drive hydraulic oil based and water based flushing units for long or short term hire. We can provide mobile, general service or zone-rated hydraulic flushing and test rigs applicable for use onshore at drilling rigs, petrochemical plants, defense establishments, railways and shipping. Our flushing rigs have been specifically developed for use with mineral and synthetic oils that support pure flushing or flushing and pressure testing for a wide range of customized high velocity oil flushing, contamination control and oil and fuel purification services. Our hydraulic flushing units come equipped with sampling points for on-site oil analysis to test new fluid for cleanliness. Or we also offer portable microscope kits and automatic particle counters to verify hydraulic fluid cleanliness. Fast response; anytime, anywhere, 24/7 Experienced technicians, pre-screened and qualified sample analysis follows these standards; ISO 4406, NAS 1638 and SAE 4059D Flushing units are all stainless steel construction Reservoir with built in suction filter, return filter and visual level and temperature Can be customised to suit customer requirements Dimensions (LxWxH) 2.27 x 1.52 x 1.78m Pressure Max working pressure Standard for Design 1134kg Electric 480V Piston Type Mineral Synthetic 10gpm 3/4 JIC Hose 3/4 JIC Hose 3 Phase, 60 amp. 600v max
DRILLING/PRODUCTION/SUBSEA Flushing Services - Hydraulic Water Based Proserv offers trained field technicians to perform a variety of filtration and flushing services applicable to pre-commissioning of new equipment as well as maintenance or refurbishment of existing equipment that will keep your topside and subsea equipment operating at peak performance, reducing the potential for premature failure. We provide a variety of diesel-engine drive and electrical drive hydraulic and water based flushing units for long or short term hire. We provide water based fluid units that are mobile, general service or zone-rated flushing and test rigs applicable for use in onshore and offshore installations, petrochemical plants, defense establishments, railways and shipping. Water based glycol fluid flushing units are also available for subsea hydraulic control applications with flow rates from 5-400 litres per minute and Integral test pumps can be provided so clients can pressure test these systems, assuring integrity. Our hydraulic flushing units come equipped with sampling points for on-site oil analysis to test new fluid for cleanliness. Or we also offer portable microscope kits and automatic particle counters to verify hydraulic fluid cleanliness. Trans Aqua HT Unit - Test HPU - LP /HP 22,500psi Fast response; anytime, anywhere, 24/7 Experienced technicians, pre-screened and qualified sample analysis follows these standards; ISO 4406, NAS 1638 and SAE 4059D Flushing units are all stainless steel construction Multi fluids capability on some units Reservoir with built in suction filter, return filter and visual level HPU Flushing Unit - s Water Based Glycol Unit () Dimensions (LxWxH) 1.84 x 1.13x 1.3m 1,119kg s Test HPU (LP /HP 22,500psi) Dimensions (LxWxH) 1.21x 1.12 x 1.98m 1,134kg s HPU Flushing Unit () Dimensions (LxWxH) 2.48x 1.49 x 1.75m 2000kg Pressure Max Working Pressure Electric 220V Piston Type Water (oil based, nonlubricated liquids, other liquids or acids please contact us) 9.9 gpm 1/2 Male JIC Pneumatic Pressure 22. Working Pressure Water (oil based, nonlubricated liquids, other liquids or acids please contact us) LP- HP-22,500psi 3 gpm /Offshore PN: T5-22. Serial:T5-100-001 Range Frequency Electric (Bartec-Varnost multi-voltage 380-690V) 380-480V / 660-690V 50-60Hz HARBEN 8.20 Pressure Max Working Pressure Mineral and Synthetic Oil 12.4 gpm 3/4 BSP 1/2 Male JIC Reservoir Capacity 80 gal 3 Phase, 60 amp, 600v max, 50/60 hz Well head valves, pipe, tubing and hose 8-line capability, 4 LP, 4 HP; tree function testing, control system testing Outlet Cooling Inlet Cooling Filter element 3p 3µ 1 BSP 63 Amp 1/2 BSP 1/2 BSP /Offshore Tapping for bottle sampling, connection for online sampling using particle monitor & PCV