Deep Foundation Improvements: Design, Construction, and Testing

Similar documents
High Temperature and Environmental Effects on Polymeric Composites

Wear and Friction of Elastomers

Wear Testing of Advanced Materials

Food Packaging Technology

Exterior Wall Systems: Glass and Concrete Technology, Design, and Construction

Innovations and Uses for Lime

Application of Agricultural Analysis in Environmental Studies

Polymer-Modified Hydraulic- Cement Mixtures

Rapid Load Fracture Testing

Cyclic Cabinet Corrosion Testing

Elastic-Plastic Fracture Test Methods: The User's Experience (Second Volume)

Buried Plastic Pipe Technology: 2nd Volume

Durability Testing of

Corrosion of Electronic and Magnetic Materials

Atmospheric Corrosion Investigation of Aluminum-Coated, Zinc-Coated, and Copper-Bearing Steel Wire and Wire Products: A Thirty-Two Year Report

Superfund Risk Assessment in Soil Contamination Studies

Brian E. Trimble and Joseph H. Brisch Editors

Techniques to Assess the Corrosion Activity of Steel Reinforced Concrete Structures

Zirconium in the Nuclear Industry: Thirteenth International Symposium

Concrete Pipe and Box Culverts

Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing: Fourth Volume

New Methods for Corrosion Testing of Aluminum Alloys

Analysis of Soils Contaminated with Petroleum Constituents

Pesticide Formulation and Delivery Systems

Testing and Performance of Geosynthetics in Subsurface Drainage

Current Trends in Protective Packaging of Computers and Electronic Components

Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing: Sixth Volume

Polymer Modified Asphalt Binders

Buildings Sealants: Materials, Properties, and Performance

Design and Protocol for Monitoring Indoor Air Quality

Validation Practices for Biotechnology Products

Masonry: Design and. Construction, Problems and Repair. John M. Melander and Lynn R. Lauersdorf, editors STP 1180

CORROSION EFFECT OF STRAY CURRENTS AND THE TECHNIQUES FOR EVALUATING CORROSION OF REBARS IN CONCRETE

Effects of Soil Characteristics on Corrosion

ASTM INTERNATIONAL Selected Technical Papers. Environmentally Considerate Lubricants. STP 1575 Editor: In-Sik Rhee

Hydraulic Conductivity and Waste Contaminant Transport in Soil

Corrosion Testing in Natural Waters: Second Volume

Pesticide Formulation and Delivery Systems:

Synthetic Bioabsorbable Polymers for Implants

Performance and Durability of the Window-Wall Interface

Limitations of Test Methods for Plas tic s

Advances in the Production and Use of Steel with Improved Internal Cleanliness

LATERALLY LOADED DEEP FOUNDATIONS: ANALYSIS AND PERFORMANCE

Journal of ASTM International Selected Technical Papers STP Lead-free. Solders. JAI Guest Editor: Narayan Prabhu

FRACTURE MECHANICS FOR CERAMICS, ROCKS, AND CONCRETE

Analytical and Experimental Methods for Residual Stress Effects in Fatigue

Pesticide. Formulations and Delivery Systems 28th Volume: Journal of ASTM International Special Technical Publication

Guide to ASTM Test Methods for the Analysis of Coal and Coke

PESTICIDE FORMULATIONS AND APPLICATION SYSTEMS: FIFTH VOLUME

Characterizing Sources of Indoor Air Pollution and Related Sink Effects

GEOTHERMAL SCALING AND CORROSION

Composite Materials: Fatigue and Fracture (Sixth Volume)

Evaluation of Existing and New Sensor Technologies for Fatigue, Fracture and Mechanical Testing

Composite Materials: Testing and Design (Ninth Volume)

Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Fifth Volume

FRACTOGRAPHY OF MODERN ENGINEERING MATERIALS: COMPOSITES AND METALS

INDUSTRIAL APPLICATIONS OF TITANIUM AND ZIRCONIUM: FOURTH VOLUME

VERTEBRATE PEST CONTROL AND MANAGEMENT MATERIALS

Environmental Toxicology and Risk Assessment: Fourth Volume. Thomas W. La Point, Fred T. Price, and Edward E. Little, Eds.

FATIGUE CRACK GROWTH MEASUREMENT AND DATA ANALYSIS

QUALITY ASSURANCE FOR ENVIRONMENTAL MEASUREMENTS

ANALYSIS OF WATERS ASSOCIATED WITH ALTERNATIVE FUEL PRODUCTION

MiCon 86: OPTIMIZATION OF PROCESSING, PROPERTIES, AND SERVICE PERFORMANCE THROUGH MICROSTRUCTURAL CONTROL

SYMPOSIUM ON SOIL EXPLORATION

DEGRADATION OF METALS IN THE ATMOSPHERE. A symposium sponsored by ASTM Committee G-1 on Corrosion of Metals Philadelphia, PA, May 1986

MICROINDENTATION TECHNIQUES IN MATERIALS SCIENCE AND ENGINEERING

Pesticide Formulation and Delivery Systems: 37th Volume, Formulations STP 1602 STP Editor: Renee K. Edlund ASTM INTERNATIONAL

ELASTIC-PLASTIC FRACTURE TEST METHODS: THE USER'S EXPERIENCE

FRACTURE MECHANICS APPLIED TO BRITTLE MATERIALS

Medical Metallic Materials and Devices

HEALTH EFFECTS OF SYNTHETIC SILICA PARTICULATES

Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Ninth Volume

INSTRUMENTED IMPACT TESTING OF PLASTICS AND COMPOSITE MATERIALS

PESTICIDE FORMULATIONS AND APPLICATION SYSTEMS: SEVENTH VOLUME

RADIATION EMBRITTLEMENT AND SURVEILLANCE OF NUCLEAR REACTOR PRESSURE VESSELS: AN INTERNATIONAL STUDY

POWER PLANT INSTRUMENTATION FOR MEASUREMENT OF HIGH-PURITY WATER QUALITY

Pesticide Formulation and Delivery Systems: 38th Volume. STP 1610 Editors: Bradley K. Fritz Thomas R. Butts ASTM INTERNATIONAL

TESTING OF METALLIC AND INORGANIC COATINGS

INTERNAL FRICTION, DAMPING, AND CYCLIC PLASTICITY

BRE Seminar Ground treatment - Getting the best from difficult sites A Reality Check What Does the Designer Need to Know?

Study on the settlement and the load-bearing capacity of Long An soft ground reinforced by the stone columns

Detection and Data Analysis in Size Exclusion Chromatography

Surface-Crack Growth: Models,

Pesticide Formulations and Application Systems: Eighth Volume

HAZARDOUS AND INDUSTRIAL SOLID WASTE TESTING FOURTH SYMPOSIUM

MICHAEL D. LEWIS, AIA

Nonlinear Fracture Mechanics: Volume I Time-Dependent Fracture

The Use of Synthetic Environments for Corrosion Testing

Pesticide Formulations and Application Systems: 16th Volume

Flow Cytometry. Principles and Applications. Edited by. Marion G. Macey, PhD

Fatigue and Fracture of Medical Metallic Materials and Devices

Standard Guidelines for the Design and Installation of Pile Foundations

ATMOSPHERIC CORROSION INVESTIGATION OF ALUMINUM-COATED, ZINC-COATED AND COPPER-BEARING STEEL WI RE AN D WI RE PRODUCTS: A TWENTY- YEAR REPORT

Pesticide Formulations and Application Systems: 23 ~d Volume

Effects of Radiation

Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Fourth Volume

GALVANIC AND PITTING CORROSION-FIELD AND LABORATORY STUDIES

Fracture Mechanics: Twenty-First Symposium

FRACTURE MECHANICS. Proceedings of the Thirteenth National Symposium on Fracture Mechanics. Philadelphia, Pa., June 1980

COMPOSITE MATERIALS: TESTING AND DESIGN (SEVENTH CONFERENCE)

Transcription:

STP 1089 Deep Foundation Improvements: Design, Construction, and Testing Melvin I. Esrig and Robert C. Bachus, editors ASTM 1916 Race Street Philadelphia, PA 19103

Library of Congress Cataloging-in-Publication Data Deep Foundation Improvements: Design, Construction, and Testing Melvin I. Esrig and Robert C. Bachus, editors. (STP ; 1089) "ASTM publication code (PCN) 04-010890-38. " Includes bibliographical references and index. ISBN 0-8031-1392-7 1. Foundations. 2. Columns--Foundations. 4. Soil stabilization. (Robert Charles). publication ; 1089. TA775,D45 1991 624. 1'5--dc20 3. Soil mechanics. I. Esrig, Melvin I. II. Bachus, Robert C. 1951- III. Series: ASTM special technical 91-12795 CIP Copyright 9 AMERICAN SOCIETY FOR TESTING AND MATERIALS, Philadelphia, PA. All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of the publisher. Photocopy Rights Authorization to photocopy items for internal or personal use, or the internal or personal use of specific clients, is granted by the AMERICAN SOCIETY FOR TESTING AND MATERIALS for users registered with the Copyright Clearance Center (CCC) Transactional Reporting Service, provided that the base fee of $2.50 per copy, plus $0.50 per page is paid directly to CCC, 27 Congress St., Salem, MA 01970; (508) 744-3350. For those organizations that have been granted a photocopy license by CCC, a separate system of payment has been arranged. The fee code for users of the Transactional Reporting Service is 0-8031-1416-8 /91 $2.50 +.50. Peer Review Policy Each paper published in this volume was evaluated by three peer reviewers. The authors addressed all of the reviewer's comments to the satisfaction of both the technical editor(s) and the ASTM Committee on Publications. The quality of the papers in this publication reflects not only the obvious efforts of the authors and the technical editor(s), but also the work of these peer reviewers. The ASTM Committee on Publications acknowledges with appreciation their dedication and contribution to time and effort on behalf of ASTM. Printcd in Baltimore, MD Junc 1991

Foreword This publication, Deep Foundation Improvements: Design, Construction, and Testing, contains papers presented at the symposium on Design, Construction, and Testing of Deep Foundation Improvement: Stone Columns and Other Related Techniques, held in Las Vegas, NV on 25 January 1990. The symposium was sponsored by ASTM Committee D-18 on Soil and Rock. Dr. Melvin I. Esrig of Woodward-Clyde Consultants in Wayne, NJ and Dr. Robert C. Bachus of Geosyntec Consultants in Norcross, GA presided as symposium chairmen and are editors of the resulting publication.

Contents Overview--R. C. BACHUS AND M. I. ESRIG Design, Construction and Testing of Sand Compaction Piles--R. D. BARKSDALE AND T. TAKEFUMI Shearing Characteristic of Composite Ground and Its Application to Stability Analysis--M. ENOKI. N. YAGI, R. YATABE, AND E. ICHIMOTO 19 Present State of Sand Compaction Pile in Japan--H. ABOSHI, Y. MIZUNO, AND M. KUWABARA 32 Bearing Capacity of Improved Ground by Sand Compaction Piles--M. TERASHI, M. KITAZUME, AND S. MINAGAWA Vibro Replacement--Design Criteria and Quality ControI--H. I. PRIEBE Specifications for Constructing and Load Testing Stone Columns in Clays-- T. D. STARK AND B. M. YACYSHYN 47 62 73 The Testing and Instrumentation of Stone Columns--B. C. SLOCOMBE AND M. P. MOSELEY 85 Use of Stone Columns to Support 1-90 Cut and Cover TunneI--T. M. ALLEN, T. L. HARRISON, J. R. STRADA, AND A. P. KILIAN Use of Stone Columns to Improve the Structural Performance of Coal Waste Deposits--J. R. DAVIE, L. w. YOUNG, M. R. LEWIS, AND F. J. SWEKOSKY 101 116 Slide Correction by Stone Columns--R. R. GOUGHNOUR, J. T. SUNG, AND J. S. RAMSEY Load Tests on Stone Columns--D. A. GREENWOOD 131 148 Design and Installation of Stone Columns at Naval Air Station--R. F. HAYDEN AND C. M. WELCH 172

Analysis of Quick Load Tests on Stone Columns: Case Histories--J, D. HUSSIN AND J. I. BAEZ 185 Dynamic Compaction/Stone Columns--Test Sections for Construction Control and Performance Evaluation at an Uncontrolled Landfill Site--D. R. SNETHEN AND M. H. HOMAN 199 The Use, Testing and Performance of Vibrated Stone Columns in the United Kingdom--K. s. WATTS AND J. A. CHARLES Construction and Testing of Deep Foundation Improvement Using the Deep Cement Mixing MethodmR. BABASAKI, K. SUZUKI, S. SAITOH, Y. SUZUKI, AND K. TOKITOH Seismic Testing Methods for Evaluation of Deep Foundation Improvement by Compaction Grouting---M, J. BYLE, P. M. BLAKITA, AND E. WINTER Lateral Static Densification at Monaco--Design, Construction and Testing-- M. P. GAMBIN Deep Chemical Injection for Protection of an Old TunnelinG. A. MUNFAKH Vibratory Deep Compaction of Underwater Fill---R. J. CASTELLI Deep Soil Compaction Using Vibratory Probes--K. R. MASSARSCH Densification of Sand Using a Variable Frequency Vibratory Probemw. j. NEELY AND D. A. LEROY 212 224 234 248 266 279 297 320 Author Index 333 Subject Index 335