Features. 50 Years of VINNAPAS : Mortar s Metamorphosis a Dispersible Polymer Powder Makes History. Number 5, July 2007

Similar documents
PRESS RELEASE. Number 13

PAINT INDIA 2016 WACKER Showcases High-Performance Silicones and Polymer Binders for Challenging Construction and Coatings Applications

Polymeric Binders for Tunnel Walls New Standards in Infrastructure Projects

EUROPEAN COATINGS SHOW 2013: WACKER Presents Novel Polymer Binders for Concrete and Construction Applications

FEATURE. Number 6, June 2009

PRESS RELEASE. Number 50

A New Facade for Cairo s Television Tower

CREATING TOMORROW S SOLUTIONS CONSTRUCTION AND PAINTS I POLYMER DISPERSIONS I WESTERN EUROPE PRODUCT OVERVIEW POLYMER DISPERSIONS

Climate Protection: Innovative Construction Chemistry Increases Energy Efficiency

CREATING TOMORROW S SOLUTIONS CONSTRUCTION I POLYMER POWDERS I MEA PRODUCT OVERVIEW VINNAPAS DISPERSIBLE POLYMER POWDERS

CREATING TOMORROW S SOLUTIONS CONSTRUCTION I POLYMER DISPERSIONS I EMEA PRODUCT OVERVIEW POLYMER DISPERSIONS

EXTERIOR INSULATION FINISH SYSTEMS (EIFS)- AN EFFICIENT ENERGY SAVING METHOD. November 2009

Fascinated by Excellence

VAE. Redisdpersible Powder DAIREN CHEMICAL CORPORATION

From Silicone to STP-E Technology WACKER silicones marketed as ELASTOSIL are long-established highquality construction sealants.

Contents. Preface... xi. 1 History of Cementitious and Polymer Technology and their Unison Introduction References...

VAE. Redispersible Powder DAIREN CHEMICAL CORPORATION

BUILDING AND CONSTRUCTION PRODUCTS

VINNAPAS POLYMER POWDERS AND DISPERSIONS FOR CONSTRUCTION

CREATING TOMORROW S SOLUTIONS

VINNAPAS SAVES COST IN THERMAL INSULATION FOR COLD CHAINS/STORAGES

The function of polymer dispersion powder in cement based dry mix products

Preliminary Study on the Functionality and Durability of Adhesive. Powder in Mortar

SYNAXIS. Sand & Aggregates SYNAXIS FUJAIRAH. All your construction needs from a name you can trust...

Your Best Partner. Tylose. for Building Materials. Product Information

CEMENTITIOUS FLOOR FINISH

for the master tradesman Setcrete Product Guide

VINNAPAS 4220 L: THE PERFECT MULTI-TALENT FOR ECONOMIC FLOORING APPLICATIONS

CREATING TOMORROW S SOLUTIONS CONSTRUCTION AND PAINTS I POLYMER DISPERSIONS I MEA PRODUCT OVERVIEW POLYMER DISPERSIONS

TECHNICAL CENTER DEVELOPMENT, TESTING, OPTIMIZATION

Spray Plasters Joint Compound Mastic Primer Tile Adhesives Stucco Water Proofing Wood Adhesives

Roles And Applications of Cellulose Ether in Environmentally Friendly. Building Materials

Key Words: adhered veneer, brick, panels, prefabrication, thick set, thin brick, thin set.

CREATING TOMORROW S SOLUTIONS ADHESIVES & SEALANTS I POLYMER BINDERS I EMEA FORMULATING THE FUTURE WITH VINNAPAS DISPERSIONS FOR ADHESIVES & SEALANTS

Building Materials I Lect :Ameer M. H. Lecture (4)

SEAL Water repellent. ERA Efflorescence reduction. FLOWKIT Levelling. Specialty Additives. ELOSET Viscosity modifying. SRT Stain-resistant

Jingkun: providing you with innovative Guar products for Construction Application

FLOOR SCREEDS & ADDITIVES SOLUTIONS FOR INDUSTRIAL, RETAIL, RESIDENTIAL & PUBLIC BUILDINGS UZIN. THE FLOOR BELONGS TO YOU.

COVERFLEX TWO-PART ELASTOPLASTIC CEMENT MORTAR FOR WATERPROOFING APPLICABLE WITH ROLL, BRUSH OR TROWEL. DESCRIPTION FIELDS OF APPLICATION

CREATING TOMORROW S SOLUTIONS CONSTRUCTION AND PAINTS I POLYMER DISPERSIONS I CEE & CIS PRODUCT OVERVIEW POLYMER DISPERSIONS

Prove a d tested si ce ore t a 30 years!

The Right Choice for Stucco.

Lime Cement Aggregates Mortar

Waterproofing Systems

SILRES THE ELEMENT OF SUCCESS

Products... Your Projects will Trust. Amazing PLASTERING & SCREEDING Product

ARDEX A 38TM Rapid Set Screed

GLASS FIBRE MESH FABRICS. Stronger ideas for a sustainable world ETICS. Marble slab reinforcement. Lightweight construction boards reinforcement

Never stop learning WaCKer academy Middle east & africa, seminar program January June 2012 CreatiNg tomorrow s solutions

CREATING TOMORROW S SOLUTIONS ARCHITECTURAL COATINGS I POLYMER BINDERS I GREATER CHINA FORMULATING THE FUTURE FOR ARCHITECTURAL COATINGS

Products for the Tiling Industry

FLOORING INSTALLATION SYSTEMS. Product Catalog

CREATING TOMORROW S SOLUTIONS. The technology of choice for waterborne adhesives

Study on Properties of Ceramic Tile Bonding Mortar

POLYMER-MODIFIED TILE ADHESIVES AND GROUTS FOR MODERN CONSTRUCTION. Edition 1.0

The professional s answer to reliable floor preparation.

Versatility in life. Polyvinyl alcohol Application Guide

TILING SIKA TILE INSTALLATION SYSTEMS

Tylose. for the Construction and Paint Industry

ARDEX A 38 MIX Rapid Set, Premixed Screed

bt-3000 n Technical Sheet Recommended use Materials Substrates

Water resistant bonding agent and mortar additive

Fiber Reinforced Tile and Stone Mortar

Aerated concrete. Our Range of Products (p.13 and 14)

Rockconcer CS-66. Powder Superplasticizer. Applications & Recommendation. Dosage: % weight percentage of cement. Properties

MASONRY VENEER SYSTEMS

Powder Additives. Additives for powder mixtures:

cl stuk Technical Sheet Recommended use Materials Substrate

When Quality and Delivery meet pricing and commitment, this is what we excel at

Selecting and Specifying Ceramic Tile with ANSI and ISO Standards

/ARD BuyLine 8656 ARDEX TILE & STONE INSTALLATION PRODUCT SHOWCASE

Sealing slurry system component of the KÖSTER KD System. approx. 15 min. approx. 20 sec. 2-3 hours. up to 7 bar (negative side)

AND SUPPORT SMOOTHING & LEVELLING LATEX BASED SPECIFICATION GUIDE // FLOORING RANGE LARTEX FLO LARTEX NA PRODUCT

May 2, 2018, Bethany, Conn. -- LATICRETE, a leading manufacturer of globally proven construction solutions for

Experience the difference

Building materials. 1. Rock is one building material that has been used in building structures for centuries.

FLOORING INSTALLATION INSTRUCTIONS

PlastCoat PC 15. The compact one. Interior and exterior plaster spraying with easy to use technology.

Two-component, highly flexible, cement-based waterproofing slurry

Growth Thr oug h I nnovation Edition

XTREME-BOND INSTALLATION SYSTEM

prospec.com Concrete Repair & Restoration

SIKA EGYPT ENG. HOSSAM ABD ELMAGIED SPECIFICATION DEPARTMENT DEC. 2016

PRIMERS & MOISTURE CONTROL SYSTEMS

Design of Adhered Masonry Veneers for Multi-storey Buildings

SIKA WET ROOM SYSTEM WATERPROOF. WORRY PROOF.

the intelligent ChoiCE Dry mix mortar Production Plants

Still in Its Infancy. adhere and hold the cement board to the steel frame.

Cement and It's Uses

CREATING TOMORROW S SOLUTIONS HEALTHCARE I PROSTHETICS I ORTHOPEDICS SILICONES FOR PROSTHETIC AND ORTHOPEDIC APPLICATIONS

TECHNICAL DATA SHEET SIKABOND PVA+ 2.5LT

Technical Manual Section 8 Rapid Drying Lightweight Screeds

CREATING TOMORROW S SOLUTIONS ADHESIVES I POLYMER BINDERS I ASIA PACIFIC & INDIA FORMULATING THE FUTURE WITH VINNAPAS DISPERSIONS FOR ADHESIVES

Mapetherm AR1 Light. Lightweight one-component cementitious mortar FOR THERMAL INSULATION WITH SUPERIOR LIGHTNESS AND ASTONISHING PERFORMANCE

IT in the Chemical Industry - Lecture for TUM June 26th, 2007

Ethylene gives permanent flexibility to the VAE polymer. No external plasticizer is thus necessary in VAEs.

CREATING TOMORROW S SOLUTIONS MOBILITY. e-novation FOR FUEL CELLS POWERED BY SILICONES

USE OF THE RECYCLED POLYSTYRENE AS POLYMER ADMIXTURE TO PRODUCE POLYMER MODIFIED MORTAR

Water-based Polymer Dispersions. for architectural paints, coatings and plasters

Professional Quality Materials

Transcription:

Wacker Chemie AG Hanns-Seidel-Platz 4 81737 München, Germany www.wacker.com Features Number 5, July 2007 50 Years of VINNAPAS : Mortar s Metamorphosis a Dispersible Polymer Powder Makes History Usually invisible, but always indispensable: WACKER s polymer dispersible powders have been leaving their mark on the construction industry for 50 years. Enabling high-quality mineral building materials with precisely defined technical properties, as well as opening up a great many novel applications and techniques, these powders help rationalize construction-site processing. In sum: VINNAPAS polymer powders have revolutionized the construction sector. From early history to the world s tallest buildings Dispersible polymer powders create new innovation potential Binders have been around for a very long time. For example, about 14,000 years ago, craftsmen in what is now eastern Turkey used quick lime to lay bricks. 3,000 years ago, the Phoenicians were the first to mix lime with volcanic rock, thereby producing a material that hardened even under water. In Roman times, the first impressive structures made with mortar were built, such as the Pont du Gard in southern France. Nowadays, the construction industry mainly hits the headlines when taller and taller buildings spring up. The Petronas Towers in Kuala Lumpur and Toronto s CN Tower are good examples here. Regardless of mortar s long history, the innovation potential of this time-honored material is by no means exhausted. Even though mortar is a traditional material, we would be wrong not to see it in a high tech light. Especially dry-mix mortar, modified with high-quality polymer binders, opens up broad innovative

Page 2 of 7 potential and a great many novel functions. Even small quantities of dispersible polymer powder suffice to imbue the mortar with new properties and qualities. It all began in 1957 Construction boom necessitated better materials Looking for new solutions Revolutionizing building sites Mortar s transformation began on July 2, 1957, when WACKER s Burghausen site ran its first tests to pulverize dispersions that previously were only availabe in liquid form. A further aim of these tests was to bag the pulverized dispersions and thus give the construction industry a quantum leap with regard to simple and reliable application and processability. Rising market demands were a major reason for these new impulses in mortar technology. In the 1950s, mortar was still prepared on site from the individual raw materials. Germany s first post-war construction boom, however, soon required enhanced mixtures. Because traditional mortar comprising cement, sand and water adheres by way of mechanically interlocking with the substrate, it can only be used with porous substrates. This meant the old-timer was soon unable to meet growing demands of the construction sector. As long ago as the 1950s, therefore, liquid polymer binders were added to mortar to enable better adhesion to a wide range of substrates. The drawback to this system, however, was that exactly the right amount of polymer binder had to be added to the mortar at the construction site, which meant that metering errors were common. In contrast, the invention of dispersible polymer powders was tantamount to revolutionizing the construction sector, because they made it possible to pre-mix mortars at the factory. On construction sites, these dry-mortar systems only needed to be stirred with water, simplifying matters enormously for the

Page 3 of 7 building industry and bringing economic advantages. Following WACKER s rapidly successful tests to produce a binder in powder form, a dispersible polymer powder plant was commissioned in 1958 with a monthly capacity of 100 tons. The birth of VINNAPAS Anticaking agent prevents particle agglomeration Polymer bridges a good ruse Over one million metric tons sold Thus, a cementitious, one-part system became available to the building sector for the first time. This system merely required the addition of water on site. The binder, marketed under the name VINNAPAS, is a vinyl acetate/ethylene copolymer. VINNAPAS polymer powders constitute what are known as spray-dried dispersions. The powder particles consist of a watersoluble protective-colloid matrix in which the water-insoluble, dispersible particles are embedded. An anticaking agent prevents the powder particles from sticking together. The name dispersible polymer powder is based on its ability to redisperse when water is added. As the mortar sets, flexible polymer bridges are formed between the brittle, mineral constituents of the mortar, thus greatly improving its adhesion to a wide range of substrates, explains Dr. Jürgen Bezler, director Technical Service Europe for the unit Construction Polymers. The polymer bridges also increase the system s flexibility. In addition, it is possible to incorporate extra properties such as thixotropy, leveling, superplasticizing and hydrophobicity. More than a million metric tons of VINNAPAS polymer powders have been sold worldwide since they were first launched. While this construction solution has long been a matter of course in western industrialized countries, there is currently aboveaverage growth in demand both in southern and eastern European countries and on Arab and Asian markets. Today, VINNAPAS products are chiefly used as tile

Page 4 of 7 Applicable as a costsaving thin bed Good anchorage whatever the substrate High-rises weigh less Formulations tailored to individual needs adhesives. This is because the so-called thin-bed technique of laying tiles would not be possible without dispersible polymer powders, which enable the tiler to work much more cost effectively, explains Bezler. VINNAPAS also outscores conventional mortars in ease and flexibility of handling, because it can stick to diverse substrates. For example, tilers used to face the horror scenario of bonding tiles to other tiles, wood, PVC, cement screed or fiberboard all in one building which necessitated using a specific mortar for each substrate. This is no longer necessary, thanks to modern dispersible polymer powders. Always working invisibly, dispersible polymer powders help in a wide variety of applications. Modified tile adhesives were used, for example, in construction work for the Olympic Games in Athens both in swimming pools and the Olympic Village s bathrooms. Tile adhesives containing VINNAPAS polymer powder were also deployed in the Jin Mao Tower, China s tallest building. Dispersible polymer powders are especially beneficial in skyscrapers, as they reduce the overall weight of such buildings and hence impact positively on the steel frame and foundations. WACKER expertise helps customers develop enhanced formulations tailored to their individual demands and respective needs and requirements an approach that has proved extremely successful. The flexibility of VINNAPAS grades applies to regional distinctions. For instance, locally available raw materials such as sand, cement and fillers are not always the same. As a result, the formulation must be optimized for ingredients and take account of aspects such as the specific climate conditions.

Page 5 of 7 Enhanced thermal insulation Three to four percent VINNAPAS is sufficient Self-leveling grouts that dry overnight The useful properties of dispersible polymer powders are employed to advantage in other fields, too. An example here is EIFS (exterior insulation and finish systems) to insulate outside walls of residential buildings. Effective thermal insulation is the best way to save energy: whereas a non-insulated outside wall lets about 50 percent of the heat escape, additional thermal insulation will reduce this figure to between 10 and 15 percent. On account of its excellent insulating properties, expanded polystyrene board is chosen as insulating material. However, it has the disadvantage of not forming a stable bond with cement. This drawback may be overcome with VINNAPAS polymer powder. Adhesive mortar with just three to four percent VINNAPAS will form a stable and permanent bond with the polystyrene board, explains Klaus Bonin, Technical Service Manager at WACKER POLYMERS. This is equally true of the improved adhesion to all kinds of substrates, ranging from concrete, brick and old plaster coatings, to mineral wool. Similarly, it was dispersible polymer powders that first permitted the development of self-leveling floor screeds. These premium-quality leveling compounds are ideal for challenging floor covering substrates. Self-leveling grouts serve primarily to prepare underfloors in readiness for the final floor covering, explains Armin Hoffmann, technical service manager at WACKER POLYMERS. For this application, uniform absorbency and the capability to smooth irregularities are of great importance. Like modified tile adhesives, these high-quality selfleveling compounds, too, are characterized by rapid setting and drying, which happens virtually overnight. Sealing slurries are based on VINNAPAS polymer powders,

Page 6 of 7 Preventing water damage and seepage losses Reflecting megatrends and the success story continues as well. Because they are easy to use, the slurries are a sure form of protecting a large number of buildings from water damage. The slurries not only prevent damage caused by water ingress, but also help save water. Impregnated water channels and reservoirs, for example, prevent water loss, thus promoting the efficient and sustainable use of water. Dispersible polymer powders have the potential to transcend current thinking by reflecting future megatrends. This applies as much to energy / watersaving opportunities as it does to improving life conditions, as in interior design and lightweight construction. For example, efficient polymer-modified insulation can reduce uncomfortable drafts and inhibit unhealthy growth of mold, thereby greatly enhancing the indoor climate. It is exactly 50 years that WACKER produced its first dispersible polymer powders in Burghausen in the course of running a series of tests. At that time, no one could guess the major impact WACKER s pioneering work would have on the construction sector as a whole. Today, we are curious to see how things will develop. After all, mortar is not just a material with a rich history, but, more importantly, one that continues to blaze trails. You can order photos below from our website via the following link: http://www.wacker.com/pressebilder Feature images

Page 7 of 7 For further information, please contact: Wacker Chemie AG Media Relations & Information Nadine Baumgartl Tel: +49 89 6279-1604 Fax: +49 89 6279-2604 nadine.baumgartl@wacker.com The company in brief: WACKER is a globally active chemical company with some 14,700 employees and annual sales of around 3.34 billion (2006). WACKER has 22 production sites and over 100 sales offices worldwide. WACKER SILICONES Silicone fluids, emulsions, rubber and resins; silanes; pyrogenic silicas; thermoplastic silicone elastomers WACKER POLYMERS Dispersible polymer powders and dispersions for applications in the construction industry; PVAc solid resins; VC copolymers; polyvinyl butyrals and acetates WACKER FINE CHEMICALS Fine chemicals, biologics and other biotech products, such as cyclodextrins and cysteine WACKER POLYSILICON Polysilicon for the semiconductor and photovoltaics industries SILTRONIC Hyperpure silicon wafers and monocrystals for semiconductor devices