MARKET STUDIES INFORMATION STORE

Similar documents
MARKET STUDIES INFORMATION STORE JURISDICTION: Pakistan Competition Commission Of Pakistan UPDATED: DECEMBER 2015

IRON AND STEEL PRODUCTS

71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding. Weld Metal - Chemistry

IRON, STEEL AND ALUMINIUM PRODUCTS

EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL CASES WHERE THE CE MARKING IS NOT POSSIBLE ON THE BASIS OF EN

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

11.F. Taiwan. Hsing-Chun Lin, Lin-Chun Chung and Ruey-Wan Liou. References

UBC Technical Guidelines Section Edition Insulation of Tanks, Steam and Condensate Piping Page 1 of 6

Chapter 73. Articles of iron or steel

The affected construction materials listed under The Fourth Schedule Subsection 33 C (1) in the Act 520, namely: 1.1 Ceramic wash basins MS 2578

METAL HANDRAILS AND RAILINGS. A. Properly identified manufacturer's literature, including shop and erection drawings before starting work.

Assessment of Houston Commodity Flows for Supply Chain Analyses

Appendix 3 JIS Steel and Related Standards 471

List of CDP-ACS. The full list of classifications for CDP s Activity Classification System (CDP-ACS)

Climb Your Way To The World of Newer Opportunities

Rajarata University of Sri Lanka - Mihintale Registration of Suppliers for Goods, Services and Works 2016

DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION CHAIN LINK FENCING

Rajarata University of Sri Lanka Mihintale Registration of Suppliers for Goods, Services and Works 2015

Nextgen Steel & Alloys

ITEM 442 METALS FOR STRUCTURES

City of St. Joseph, MO, Water Protection Division Industrial Wastewater Survey Questionnaire - Long Form (page 1 of 6)

J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25

Aesteiron Steels Private Limited is one of the prominent importers & exporters of a wide range of steel products. Our products are procured from

UC Denver Guidelines and Design Standards SECTION STRUCTURAL METAL FRAMING

RATE OF DUTY UNIT(S) DESCRIPTION OF GOODS

Division 15 INSULATION Section 15100

OKLAHOMA DEPARTMENT OF TRANSPORTATION SPECIAL PROVISIONS FOR BUY AMERICA

Oman College of Management & Technology COURSE NAME: MATERIALS SCIENCE PROPOSED BY: DR.MOHAMED ALNEJEM SEMESTER: SECOND 2015/2016 CHAPTER (7): METALS

A. ITEMS ON UGANDA S LIST OF INDUSTRIAL INPUTS AND RAW MATERIALS FOR THE FINANCIAL YEAR 2017/2018

WROUGHT IRON FURNITURE

Keuka Studios May 2008 SECTION {05720} CABLE RAILING SYSTEM {CABLE RAILING SYSTEM} Display hidden text for Specifier Notes.

1. List the five factors of production and give and example of each. land labor capital entrepreneurship technology

metal & precision Binder Technologie innovative metal technology for your peak performance and market lead aerospace

System No. SP777 (FOR HORIZONTAL OR VERTICAL SEPARATIONS)

The International Committee of the Red Cross

DIVISION 05 METALS Commissioning of Metals STRUCTURAL METAL FRAMING Structural Steel Framing

Muyang Steel Silo. June 2011

LITHUANIA CHINA BILATERAL TRADE

EXPRESSION OF INTEREST (EOI) FOR. Mechanical Works

Workers Compensation Board of Manitoba 2018 Classification Codes and New Business Entry Rates

SHAFT-MOUNTED FLAP WHEELS

CHAPTER M-1 INDUSTRIAL DISTRICT

Item 442 Metal for Structures

CONSTRUCTION SPECIFICATION FOR CHAIN LINK FENCE

2008 Census of Industrial Production (NACE Rev 2)

Country Profile Oman

TABLE OF CONTENTS Updated 1/2014 SECTION TITLE DATE

DESIGN AND FABRICATION OF SUGARCANE HARVESTER USING SAW CHAIN (SOLAR OPERATED)

2.15 I-4: Heavy Manufacturing

1. List the five factors of production and give and example of each. land labor capital entrepunuership human capital or technology

Industries for PI+ v2.2

1. List the five factors of production and give and example of each. 2. Describe a situation and then explain the opportunity cost of that action.

Special Provision No. 541S01 October OPSS 541, Construction Specifications for Chain Link Fence, is deleted and replaced with the following:

INVEST IN KOSTANAY. the Republic of Kazakhstan

SECTION CHAIN LINK FENCING

hard to the core EXTREME PERFORMANCE CORE DRILL BITS

Analysis of the industrial sectors in different Countries: Austria

TRI-M Mecano Metal de Moçambique

Jayant Impex Private Limited

SECTION HANDRAILS AND RAILINGS. A. Section Metal Fabrications: Associated metal supports.

We are a reputed manufacturer and supplier of resistance welding machines, import substitution machinery, special purpose machines, and air pollution

PRECISION INDUSTRIAL CONTRACTORS, INC

Policy Brief Does Import Protection Save Jobs?

Organisation de Coopération et de Développement Economiques Organisation for Economic Co-operation and Development

STUD WELDING IMPRESSIVE TECHNOLOGY

RESTRICTED _.. SCM/74/Add.A GENERAL AGREEMENT ON 3 October w-tributum SEMI-ANNUAL REPORTS UNDER ARTICLE 2:16 OF THE AGREEMENT.

SECTION HANDRAILS AND RAILINGS. A. Section Cast-In-Place Concrete; coordination with substrate.

A-BEAM W Erection Manual 2

K. ASTM F436- Standard Specification for Hardened Steel Washers; 2011.

Aluminum Component Pipe Railings

Addendum #4 NEW LOW HEAD OXYGEN SYSTEM Contractor EXHIBIT T SPECIAL PROVISIONS SECTION METAL SHADE STRUCTURE

SECTION 2 DIVISION 05 METALS

Work Order Number *************************************************************************** SECTION C20 STAIRS 02/18

UNIT V PART A

SECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT

ABN AMRO Group N.V. Overview total assets 2016

Introduction

Introduction. Structures may be classified on the basis of materials used for construction, as follows: Steel structures. Aluminium structures

TUNNELLING IN INDIA ( )

ENVIRONMENTAL QUESTIONNAIRE AND DISCLOSURE STATEMENT

Short Term Programs for Civil Engineering Students (Diploma/Degree) Specialization: Lab Testing

1.02 SYSTEM DESCRIPTION

List of Committees CONSTRUCTION STANDARDS - CORROSION PROTECTION SYSTEMS FOR BURIED OR IMMERSED METAL STRUCTURES

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

ITEM 442 METAL FOR STRUCTURES

EAST CENTRAL REGIONAL WATER RECLAMATION FACILITY PROCESS WATER SYSTEM PROJECT

NORONHA ADVOGADOS Global lawyers

SECTION ALUMINUM HANDRAIL SYSTEMS

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

February Purlins Framing Engineering Dry Lining Cable Management. voestalpine Metsec plc

At IBISWorld, we know that industry intelligence is more than assembling facts: It s combining data and insight to answer the questions that

SECTION ORCHESTRA PIT FILLER

Product Guide Specification

ROAD CLOSURE GATE PLAN ESTIMATED QUANTITIES CONCRETE FOOTINGS FOR S. D. DEPT. OF TRANSPORTATION DECEMBER 1996 ELEVATION CABLE TIE DOWN FOOTING

Installation and Use Instructions for the Big Ass Workbench Manufactured by Mercer Innovation, LLC

Constraints on how the Contractor Provides the Works

Structural Steel. Production and Applications. GWP Engineering Limited

(Garuda Emblem) Notification of Ministry of Industry Re: Safety procedure in working environment B.E (2003)

Transcription:

MARKET STUDIES INFORMATION STORE SECTOR: MANUFACTURING UPDATED: DECEMBER 2015

Manufacturing Production and distribution of games Ongoing Outcome (tick relevant columns): The study is conducted to analyse competition and market structure. Furniture fittings Ongoing Initiated 2/2015 Own initiative Analysis of the market, including its structure and level of concentration.

Government for Changes Government to Change Changes to Government Road signs Ongoing Initiated 12/2013 Analysis of the market, including its structure and level of concentration. Russia Aluminium deep drawing cans with easy-open caps November, 2010; The Study was actualized in August, 2015 3 months (in 2015) Consideration of the case on violation of antimonopoly legislation (2010); reviewing of the application on economic concentration (2015) 2010: FAS Russia detected signs of violation of antimonopoly legislation. To confirm the presence/absence of violations of antimonopoly legislation it is necessary to determine the presence/absence of a dominant position in the market; 2015: Market analysis was carried out in the framework of consideration of the application on economy concentration. At the end of the market analysis was issued the improvement notice. http://fas.gov.ru/documents/documentdetails.html?id=13929

Paving blocks May 2015 11 months Study of the paving blocks offered on the domestic market. Issues: market structure and concentration, participants conduct in the distribution process. Pakistan Automobile Industry in Pakistan April, 2015 Own initiative and complaints from customers Outcome (tick relevant columns): Concentration in the market, product market segmentation, high prices, low standards and terms detrimental to customers. A related order can be seen at: http://cc.gov.pk/images/downloads/indus_motor_order.pdf

Croatia Machinery for forestry, parks and gardens 24 November 2014 Up to one year Own initiative. Fire extinguishers 2014 1 year Gaining in-depth knowledge of the market. A study of the market, including the determination of its structure and degree of concentration.

Russia Hollow drill steel and alloy hollow drill steel February, 2014 6 months Application of legal entity FAS Russia received an application from producer of hollow drill steel and alloy hollow drill steel on the revision of the previously granted improvement noticed by the FAS Russia. Production and distribution of electric mowers and other electric gardening tools January 2014 10 months The study was conducted to analyse competition and market structure.

Gate automation systems January 2014 12 months Study of the gate automation systems offered on the domestic market. Issues: market structure and concentration, participants conduct in the distribution process. Russia Large-diameter welded tubes, intended for the construction / repair of pipelines December 2013 Consideration of the case on violation of antimonopoly legislation FAS Russia detected signs of violation of antimonopoly legislation. To confirm the presence/absence of violations of antimonopoly legislation it is necessary to determine the presence/absence of a dominant position in the market.

Portable readers July 2013 2 years Ready-mixed concrete April 2013 28 months The main purpose of the market study was to analyse competition. In, cement producers are vertically integrated with producers of ready-mixed concrete.

Russia Steel bars for reinforcement of concrete structures February, 2013 Workplan for the analysis of the state of competition in product markets Domestic market of license plates production January 2013 18/05/2012-29/01/2013 District authorities (City of Olsztyn) Outcome (tick relevant columns): Suspicion of bid rigging.

Seed of corn and sugar beets 2013 1 year Gaining in-depth knowledge of the market. A study of the market, including the determination of its structure and degree of concentration. Production and distribution of roofing felt January 2013 10 months The study was conducted to analyse competition and market structure.

Portugal The Cork Industry, from its extraction to the retail of manufactured products December 2012 Side text. Outcome (tick relevant columns): A Parliament Resolution from July 2009 aimed at defending the cork industry, urged the PCA to conduct ( ) a thorough and urgent investigation into what is happening in this important and strategic sector for the national economy ( ) with a particular focus on imports and exports, and take measures and issue recommendations it deems necessary to restore a normal market functioning and insure the stability of the sector [our translation from Portuguese]. Concerns about the functioning of the cork sector were also conveyed to the PCA by some industry operators. This Report aimed at characterizing the full industry vertical chain in Portugal, from the extraction of cork to the marketing of the various cork based products, as well as the current regulatory framework of the sector, and issued a set of recommendations aiming at the promotion of a more efficient functioning of the various stages along the vertical chain, through the reduction of certain efficiency reducing information asymmetries between operators, the relaunching of a well-functioning commodities market for the different raw materials, and a revision of various legislations regulating the sector. Unabridged Version in Portuguese: http://www.concorrencia.pt/vpt/estudos_e_publicacoes/estudos_economicos/o utros/documents/adc-relatorio-cortica_2012.pdf

Russia Titanium fasteners from an alloy BT-16 for the assembly of aviation equipment manufactured by the method of cold heading September, 2012 Detection of the signs of violations of antimonopoly legislation FAS Russia detected signs of violation of antimonopoly legislation. To confirm the presence/absence of violations of antimonopoly legislation it is necessary to determine the presence/absence of a dominant position in the market. Shower cubicles production June 2012 10/10/2011-29/06/2012 Focus on potential collusion in distribution, price fixing and also naming product markets.

Production and distribution of styrofoam and similar products April 2012 9 months The study was conducted to analyse competition and market structure E-cigarettes March 2012 8 months Analysis of the market, including its structure and level of concentration.

Welding machines January 2012 10 months / information from market participants The market study was conducted to study competition on the market. RPM suspicion Russia Anisotropic electrotechnical steel January, 2012 Detection of the signs of violations of antimonopoly legislation FAS Russia detected signs of violation of antimonopoly legislation. To confirm the presence/absence of violations of antimonopoly legislation it is necessary to determine the presence/absence of a dominant position in the market.

Fiber optic cables 2012 1 year Gaining in-depth knowledge of the market. A study of the market, including the determination of its structure and degree of concentration. Production and distribution of boilers November 2011 7 months The study was conducted to analyse competition and market structure.

in the Law Russia Widescreen sheet for the production of single-seam longitudinal welded pipes with a diameter of 1,020 mm and above November, 2011 Consideration of the case on violation of antimonopoly legislation FAS Russia detected signs of violation of antimonopoly legislation. To confirm the presence/absence of violations of antimonopoly legislation it is necessary to determine the presence/absence of a dominant position in the market. Croatia Cement 8 September 2011 1 year Own initiative To investigate the state of play on this market in Croatia.

Russia Clapboards sheets made from aluminum alloys September, 2011 Consideration of the case on violation of antimonopoly legislation FAS Russia detected signs of violation of antimonopoly legislation. To confirm the presence/absence of violations of antimonopoly legislation it is necessary to determine the presence/absence of a dominant position in the market. Production of halon (gas) May 2011 1 year Analysis of the market, including its structure and level of concentration.

Colombia Cotton Fibre for textiles and clothing in Colombia 2011 4 months Own initiative In Colombia, different varieties of cotton fibre are grown. Despite the double harvest per year, domestic supply is not enough to meet the demand of the textile industry having to appeal to imports to increase supply. Within the market, there are restrictions to the competition from the demand side since the number of producers is lower than the number of buyers allowing the former group to e xercise purchase power. http://www.sic.gov.co/drupal/masive/datos/estudios%20economicos /Documentos%20%20elaborados%20por%20la%20Delegatura%20de %20Protecci%C3%B3n%20de%20la%20Competencia/2011/Algodon2 012.pdf Bicycles 2011 1 year Gaining in-depth knowledge of the market. A study of the market, including the determination of its structure and degree of concentration

Government for Changes Government to Change Changes to Government El Salvador Iron 19 October 2010 (RC-AE-08/2010 Decission date) Start date (contract): January/2010 End date (decision): October/2010 It was included in the studies plan 2006-2010 Outcome (tick relevant columns): Broadly, the Study aims to characterize the iron and steel industry in El Salvador which will provide knowledge of its relevant characteristics in order to establish the competition conditions in the same and present a diagnose and if necessary propose the appropriate recommendations to improve market efficiency and increase consumer welfare. Report: http://www.sc.gob.sv/pages.php?id=1002 Decision: http://www.sc.gob.sv/pages.php?id=1526 Car batteries March 2010 10 months Car batteries offered on the domestic market. Issues: market structure and concentration, participants conduct in the distribution process.

Sanitary fittings February 2010 2 months Complaint Sanitary fittings marketed by manufacturers from two regions of. Issues: market structure and concentration, participants conduct. India Paint and Tyre Industry June 2008 16 months CCI Advisory Committee on Market Studies Outcome (tick relevant columns): To understand the structure of the Tyre and Paint sectors with a view to gauge the state of competition in these sectors. The basic premise of the study was that the information obtained would serve as some guide to the CCI in terms of the quantification of parameters that could be used to assess anti-competitive behaviour. In addition, the study would also serve as some guide to the state of com petition in these sectors.

The substructure of rails 2010 1 year Gaining in-depth knowledge of the market. A study of the market, including the determination of its structure and degree of concentration. India Indian Manufacturing June 2007 16 months CCI Advisory Committee on Market Studies Outcome (tick relevant columns): To assess the Competition in the Indian Manufacturing sector. The study was also aimed at examining the state of competition - actual and potential. This included three aspects of competition namely - structural, conduct and performance to analyse the industry structure to have an idea about actual competition in the sector, qualitative analysis of existing policy barriers and industry/firm l evel practices that may be deterring the entry of new firms and thus restricting potential competition, and analysis of performance indicators both at firm and industry level.

in the Law India Pesticides and Cement Industry March 2007 CCI Advisory Committee on Market Studies Outcome (tick relevant columns): To understand the structure of the Cement and Pesticides sectors with a view to gauge the state of competition in these sectors. The basic premise of the study is that the information obtained would serve as some guide to the CCI in terms of the quantification of parameters that could be used to assess anti-competitive behaviour. In addition, the study would also serve as some guide as to the state of competition in these sectors. http://www.cci.gov.in/images/media/completed/3pesticide_20080508 111242.pdf http://www.cci.gov.in/images/media/completed/guide_compliance_en terprises_20080508105753.pdf Portugal Pulp Milling 2003-2006 3 years There was a complaint to the previous Director General of Competition This sector was identified as being highly concentrated.

Russia Steel and Steel Products July 2004 4 months Decrease in number of medium size producers of steel products Improving competitive situation in the sector.