SOFT CARE INSTANT HAND SANITISER - FRAGRANCE FREE

Similar documents
GLITZ WATERLESS HAND SANITISER

SOFT CARE M 12X500ML HH12117 SOFT CARE M 6X800ML

MR MUSCLE AMMONIATED FLOOR AND GENERAL PURPOSE CLEANER

Clean Plus Instant Hand Sanitiser

Hazchem Code COCAMIDE DEA - - GLYCOL STEARATE - - SODIUM CHLORIDE DL-ALPHA-TOCOPHERYL ACETATE

SAFETY DATA SHEET HAND WASH - ANTIBACTERIAL 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION

CleanPlus Instant Hand Sanitiser

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS 4. FIRST AID MEASURES

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice S39

AIR FRESHENER MOUNTAIN AIR ALCOHOL BASED

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS 4. FIRST AID MEASURES SOFT CARE M

OSMOSE HYLITE 711 TIMBER PRESERVATIVE

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS 4. FIRST AID MEASURES SUMA STAR D1

POMEGRANATE BODY CREME

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS 4. FIRST AID MEASURES WINDEX

LOMASI POMEGRANATE SCRUB

MATERIAL SAFETY DATA SHEET

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS 4. FIRST AID MEASURES

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS 4. FIRST AID MEASURES

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS 4. FIRST AID MEASURES

CRC 3013 SOFT SEAL (AEROSOL)

BREAK UP 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION CLASSIFIED AS HAZARDOUS ACCORDING TO ASCC CRITERIA

MONT MARTE TEMPERA PAINT - CAKE (ALL COLOURS EXCEPT BLACK) Ingredient Identification Classification Content CAS: EC: EC:

DAVID GRAYS RAT N MOUSE KILLER

SAFETY DATA SHEET CLOUDY AMMONIA 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS

SAFETY DATA SHEET 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS

Ingredient Formula CAS No. Content SODIUM CARBONATE Na2-C-O >60% SODIUM TRIPOLYPHOSPHATE H5-O10-P3-5Na %

5.56 (BULK) PRODUCT CODE PRODUCT CODE PRODUCT CODE PRODUCT CODE CRC 5-56 (BULK) (FORMERLY)

IRON PHENANTHROLINE (TEST KIT - GLOBAL)

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS 4. FIRST AID MEASURES

POMADE SUMITOMO CHEMICAL AUSTRALIA POMADE SUMITOMO POMADE

OSMOSE PROTIM SOLIGNUM TIMBER PROTECTIVE EMULSION CN

Cool Charm Roll-on is an anti-perspiration deodorant for personal use.

3.1 Substances / Mixtures Ingredient CAS Number EC Number Content 2-PHENOXYETHANOL ETHYLHEXYLGLYCERIN

1.0 IDENTIFICATION OF THE MATERIAL AND SUPPLIER

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS 4. FIRST AID MEASURES

3.1 Substances / Mixtures Ingredient Identification Classification Content (EC) No 1272/ /548/EEC CARBON CAS: EC:

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS 4. FIRST AID MEASURES

CDT CUTTING OIL (AEROSOL)

SAFETY DATA SHEET TOILET & URINAL CLEANER 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION

In case of fire use only the recommended extinguishing agents. Subsidiary Risk(s) 2YE

Material Safety Data Sheet MONT MARTE WATERCOLOUR PAINT 12 PCE (ALL COLOURS EXCEPT IVORY BLACK)

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS 4. FIRST AID MEASURES

STRUCTAflor Particleboard Flooring

Weston Street, Brunswick East, VIC, 3057, AUSTRALIA Telephone (03) Fax (03) Emergency (03)

3.1 Substances / Mixtures Ingredient CAS Number EC Number Content NON HAZARDOUS INGREDIENTS ETHYLENE GLYCOL MONOBUTYL ETHER

TO BLEACH AND DEODORISE COTTON, SYNTHETIC OR WOOL BLENDS IN THE LAUNDRY.

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS 4. FIRST AID MEASURES

DAVID GRAYS AEROSOL AIR FRESHENER

2.1 Classification of the substance or mixture CLASSIFIED AS HAZARDOUS ACCORDING TO HAZARDOUS SUBSTANCES [CLASSIFICATION] REGULATIONS 2001

SAFETY DATA SHEET 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION SUN ALL IN 1 TABLETS. Product Name

Subsidiary Risk(s) Ingredient Identification Classification Content. ACRYLIC RESIN Not Available Not Available

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice S36/37/39


OSMOSE PROTIM SOLIGNUM RAINCOAT WATER REPELLENT

Ingredient Formula CAS No. Content 2-METHOXY-1-METHYLETHYL ACETATE C6-H12-O <19% NAPHTHA (PETROLEUM) HYDRODESULPHURISED, HEAVY

EA PRODUCT CODE EA55 HEAT DISSIPATION APPLICATIONS LONG DISTANCE AND BULK GROUTING

3.1 Substances / Mixtures Ingredient CAS Number EC Number Content PARAFFIN WAX PHENOXYETHANOL

OSMOSE PROTIM-SOLIGNUM RESEAL SUPPLEMENTARY TIMBER PROTECTIVE

OSMOSE SARMIX OXCELL C-680 FOR TIMBER TREATMENT

OSMOSE IMPRETECT C.S.

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION. 1.1 Product identifier ZINC ANTI SEIZE. Synonym(s)

superinsulation Safety Data Sheet SDS Date 01 August 2012 Cryogel Z

3.1 Substances / Mixtures Ingredient Identification Classification Content 4-CHLOR-3,5-XYLENOL CAS: EC:

2. HAZARDS IDENTIFICATION CLASSIFIED AS HAZARDOUS ACCORDING TO HAZARDOUS SUBSTANCES [CLASSIFICATION] REGULATIONS 2001

CLASSIFIED AS HAZARDOUS ACCORDING TO HAZARDOUS SUBSTANCES (CLASSIFICATION) REGULATIONS 2001

Safety Data Sheet Issue Date: 1 st Jan 2018

BENCHTOPS BUILDING MATERIAL CLADDING CONSTRUCTION MATERIAL INDUSTRIAL APPLICATIONS TILE Building Facades

Contact Organics LocalSafe Weed Terminator RTU Spray Mixture

Subsidiary risk(s) Ingredient Identification Classification Content CAS: EC: EC: EC: EC:

Material Safety Data Sheet COPPER CONCENTRATE (PHU BIA MINING LIMITED)

3.1 Substances / Mixtures Ingredient CAS Number EC Number Content CHROMIUM (III) OXIDE

Do not breathe gas/fumes/vapour/spray (where applicable).

PRODUCT NAME: SOLBERG ARCTIC FOAM 603F ATC TM 3% x 3%

MARTE DIMENSION ACRYLIC PAINTS (ALL COLOURS EXCEPT BURNT UMBER, RAW UMBER, VANDYKE BROWN, NATURAL GREY, BLACK) (EU)

BGC PLASTERBOARD, BGC CEILINGBOARD, BGC COVE CORNICE, BGC WATER-RESISTANT PLASTERBOARD, BGC FIRE-RESISTANT PLASTERBOARD BGC IMPACTBOARD

SAFETY DATA SHEET. Do not breathe gas/fumes/vapour/spray (where applicable). Subsidiary Risk(s) Ingredient Identification Classification Content

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS. 1.1 Product identifier GESSO

3.1 Substances / Mixtures Ingredient CAS Number EC Number Content PARAFFIN WAX PHENOXYETHANOL

UN number None Allocated Transport Hazard Class None Allocated Packing group None Allocated Hazchem Code None Allocated

ANSULITE 6% AFFF FORMULA ICAO-B

3.1 Substances / Mixtures Ingredient Identification Classification Content (EC) No 1272/ /548/EEC DISTILLATES (PETROLEUM), HYDROTREATED LIGHT

BluCem HE80. Material Safety Data Sheet EARLY STRENGTH CEMENTITIOUS GROUT 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION

TRUPHOS MAGNESIUM 1.0 IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2.0 HAZARDS IDENTIFICATION. 1.1 Product Identifier Product name Synonym(s)

In case of accident or if you feel unwell seek medical advice immediately (show the label where possible). S53

NEUTRAL CLEANING FLUID FOR STAINLESS STEEL TB31ND NEUTRAL CLEANING FLUID FOR STAINLESS STEEL TIG BRUSH WELD CLEANING SOLUTION FOR STAINLESS STEEL

Material Safety Data Sheet

1. IDENTIFICATION OF THE SUBSTANCE OR MIXTURE AND OF THE SUPPLIER

FIRE PROTECTION APPLICATIONS INDUSTRIAL APPLICATIONS. 3.1 Substances / Mixtures Ingredient CAS Number EC Number Content GRAPHITE

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER 2. HAZARDS IDENTIFICATION 3. COMPOSITION/ INFORMATION ON INGREDIENTS. 1.1 Product identifier

Tower A, 112 Talavera Road, North Ryde, NSW, 2113, AUSTRALIA (02) (02)

Safety Data Sheet NOT CLASSIFIED AS HAZARDOUS ACCORDING TO CRITERIA OF NOHSC 1. IDENTIFICATION OF THE PREPARATION AND THE COMPANY

MONT MARTE MAKE N BAKE POLYMER CLAY (ALL COLOURS) - MMSP , MMSP6401 MAKE N BAKE POLYMER CLAY POLYMER CLAY

VISCOL SAFETY DATA SHEET

ANCHORING GROUT POST TENSIONED CABLE GROUT SOIL NAILS GROUT

Ausgro Technologies Pty Ltd Phone: PO Box 2003 East Dandenong Vic 3175 Trade Name: Section 2 - Hazards Identification

SaniSpray Sanitising Spray & Wipe Mountain Cleaning Products

MATERIAL SAFETY DATA SHEET

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER

Transcription:

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Supplier Name Address Telephone Fax Emergency Email Web Site Synonym(s) DIVERSEY AUSTRALIA PTY. LIMITED 29 Chifley St, Smithfield, NSW, AUSTRALIA, 2164 (02) 9757 0300 (02) 9725 5767 1800 033 111 (24 hrs) aucustserv@diversey.com http://www.diversey.com ALL PACK SIZES Use(s) SDS Date HAND SANITISER 08 Apr 2010 2. HAZARDS IDENTIFICATION CLASSIFIED AS HAZARDOUS ACCORDING TO ASCC CRITERIA RISK PHRASES R11 Highly flammable. SAFETY PHRASES S16 Keep away from sources of ignition - No smoking. S2 Keep out of reach of children. S7 Keep container tightly closed. CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE III Hazchem Code 2YE EPG 3A1 3. COMPOSITION/ INFORMATION ON INGREDIENTS Ingredient Formula CAS No. Content ETHANOL C2-H6-O 64-17-5 >60% NON HAZARDOUS INGREDIENTS Not Available Not Available remainder 4. FIRST AID MEASURES Eye Inhalation Skin Ingestion Advice to Doctor If in eyes, hold eyelids apart and flush the eye continuously with running water. Continue flushing until advised to stop by a Poisons Information Centre on 13 11 26 (Australia Wide) or a doctor, or for at least 15 minutes. Due to product form / nature of use, an inhalation hazard is not anticipated. Exposure is considered unlikely. Skin irritation is not anticipated. For advice, contact a Poisons Information Centre on 13 11 26 (Australia Wide) or a doctor (at once). Treat symptomatically Page 1 of 5

5. FIRE FIGHTING MEASURES Flammability Fire and Explosion Extinguishing Hazchem Code Highly flammable. May evolve toxic gases (carbon oxides, hydrocarbons) when heated to decomposition. Do not expose to heat and ignition sources. Eliminate all ignition sources including cigarettes, open flames, spark producing switches/tools, heaters, naked lights, pilot lights etc. when handling. Evacuate area and contact emergency services. Toxic gases may be evolved in a fire situation. Remain upwind and notify those downwind of hazard. Wear full protective equipment including Self Contained Breathing Apparatus (SCBA) when combating fire. Use waterfog to cool intact containers and nearby storage areas. Water fog or foam. Prevent contamination of drains or waterways. 2YE 6. ACCIDENTAL RELEASE MEASURES Spillage If spilt (bulk), mop up area. Use personal protective equipment. Clean spill site with water. CAUTION: Spill site may be slippery. 7. STORAGE AND HANDLING Storage Handling Store in a cool, dry, well ventilated area, removed from oxidising agents, acids and foodstuffs. Ensure containers are adequately labelled, protected from physical damage and sealed when not in use. Before use carefully read the product label. Use of safe work practices are recommended to avoid eye or skin contact and inhalation. Observe good personal hygiene, including washing hands before eating. Prohibit eating, drinking and smoking in contaminated areas. 8. EXPOSURE CONTROLS/ PERSONAL PROTECTION Exposure Stds Biological Limits Engineering Controls PPE TWA STEL Ingredient Reference ppm mg/m3 ppm mg/m3 Ethanol ASCC (AUS) 1000 1880 -- -- No biological limit allocated. Avoid inhalation. Use in well ventilated areas. Where an inhalation risk exists, mechanical explosion proof extraction ventilation is recommended. Flammable/explosive vapours may accumulate in poorly ventilated areas. Vapours are heavier than air and may travel some distance to an ignition source and flash back. Maintain vapour levels below the recommended exposure standard. Personal Protective Equipment is not required under normal conditions of use.note: Those individuals who experience adverse skin reactions are advised to discontinue use and seek professional advice regarding a suitable alternative. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance CLEAR COLOURLESS GEL Solubility (Water) SOLUBLE Odour CHARACTERISTIC ALCOHOLIC ODOUR Specific Gravity 0.87 ph 6.5 (Approximately) % Volatiles NOT AVAILABLE Vapour Pressure NOT AVAILABLE Flammability HIGHLY FLAMMABLE Vapour Density NOT AVAILABLE Flash Point 21 C (Ethanol) Boiling Point NOT AVAILABLE Upper Explosion Limit 19 % (Ethanol) Melting Point NOT AVAILABLE Lower Explosion Limit 3.3 % (Ethanol) Evaporation Rate Viscosity NOT AVAILABLE 13,000 cps (Approximately) Page 2 of 5

10. STABILITY AND REACTIVITY Chemical Stability Stable under recommended conditions of storage. Conditions to Avoid Material to Avoid Decomposition Hazardous Reactions Avoid contact with incompatible substances. Incompatible with oxidising agents (eg. hypochlorites), acids (eg. nitric acid), heat and ignition sources. May evolve toxic gases (carbon oxides, hydrocarbons) when heated to decomposition. Hazardous polymerization is not expected to occur. 11. TOXICOLOGICAL INFORMATION Health Hazard Summary Eye Inhalation Skin Ingestion This product may present a hazard with direct eye contact. Liver damage (cirrhosis) and central nervous system (CNS) depression may occur with high level or chronic ingestion of ethanol. However, due to the nature of use, adverse health effects are not anticipated. Contact may result in irritation, lacrimation, pain and redness. Due to the low vapour pressure, an inhalation hazard is not anticipated with normal use. Prolonged or repeated contact may result in mild irritation. Some individuals may experience allergic reaction. Ingestion of large quantities may result in nausea, vomiting, intoxication and gastrointestinal irritation. Toxicity Data ETHANOL (64-17-5) LC50 (Inhalation): 20000 ppm/10 hours (rat) LCLo (Inhalation): 21900 ppm (guinea pig) LD50 (Ingestion): 3450 mg/kg (mouse) LD50 (Intraperitoneal): 3600 ug/kg (rat) LD50 (Intravenous): 1440 mg/kg (rat) LD50 (Subcutaneous): 8285 mg/kg (mouse) LDLo (Ingestion): 1400 mg/kg (human) LDLo (Intraperitoneal): 3000 mg/kg (dog) LDLo (Intravenous): 1600 mg/kg (dog) LDLo (Skin): 20 g/kg (rabbit) LDLo (Subcutaneous): 19440 (infant) TCLo (Inhalation): 20000ppm/7 hours (1-22 days pregnant rat - reproductive) TDLo (Ingestion): 50 mg/kg (human) 12. ECOLOGICAL INFORMATION Environment This product is not anticipated to cause adverse effects to animal or plant life if released to the environment in small quantities. Not expected to bioaccumulate. 13. DISPOSAL CONSIDERATIONS Waste Disposal Legislation For small amounts absorb with sand, vermiculite or similar and dispose of to an approved landfill site. Contact the manufacturer for additional information if larger amounts are involved. Dispose of in accordance with relevant local legislation. 14. TRANSPORT INFORMATION CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE III Hazchem Code 2YE EPG 3A1 Page 3 of 5

IATA IMDG III III 15. REGULATORY INFORMATION Poison Schedule AICS 16. OTHER INFORMATION Additional Information A poison schedule number has not been allocated to this product using the criteria in the Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP). All chemicals listed on the Australian Inventory of Chemical Substances (AICS). ABBREVIATIONS: ADB - Air-Dry Basis. BEI - Biological Exposure Indice(s) CAS# - Chemical Abstract Service number - used to uniquely identify chemical compounds. CNS - Central Nervous System. EINECS - European INventory of Existing Commercial chemical Substances. IARC - International Agency for Research on Cancer. M - moles per litre, a unit of concentration. mg/m3 - Milligrams per cubic metre. NOS - Not Otherwise Specified. NTP - National Toxicology Program. OSHA - Occupational Safety and Health Administration. ph - relates to hydrogen ion concentration using a scale of 0 (high acidic) to 14 (highly alkaline). ppm - Parts Per Million. RTECS - Registry of Toxic Effects of Chemical Substances. TWA/ES - Time Weighted Average or Exposure Standard. HEALTH EFFECTS FROM EXPOSURE: It should be noted that the effects from exposure to this product will depend on several factors including: frequency and duration of use; quantity used; effectiveness of control measures; protective equipment used and method of application. Given that it is impractical to prepare a Chem Alert report which would encompass all possible scenarios, it is anticipated that users will assess the risks and apply control methods where appropriate. Report Status PERSONAL PROTECTIVE EQUIPMENT GUIDELINES: The recommendation for protective equipment contained within this Chem Alert report is provided as a guide only. Factors such as method of application, working environment, quantity used, product concentration and the availability of engineering controls should be considered before final selection of personal protective equipment is made. This document has been compiled by on behalf of the manufacturer of the product and serves as the manufacturer's Safety Data Sheet ('SDS'). It is based on information concerning the product which has been provided to by the manufacturer or obtained from third party sources and is believed to represent the current state of knowledge as to the appropriate safety and handling precautions for the product at the time of issue. Further clarification regarding any aspect of the product should be obtained directly from the manufacturer. Prepared By While has taken all due care to include accurate and up-to-date information in this SDS, it does not provide any warranty as to accuracy or completeness. As far as lawfully possible, accepts no liability for any loss, injury or damage (including consequential loss) which may be suffered or incurred by any person as a consequence of their reliance on the information contained in this SDS. Risk Management Technologies 5 Ventnor Ave, West Perth Western Australia 6005 Phone: +61 8 9322 1711 Fax: +61 8 9322 1794 Page 4 of 5

Email: info@rmt.com.au Web: www.rmt.com.au SDS Date: 08 Apr 2010 End of Report Page 5 of 5