Similar documents
Duke Energy Carolinas Distribution Construction Standards Reference Guide

OVERHEAD SERVICES - SECONDARY

STANDARD DRAWINGS. September 2013 UPDATED FEBRUARY 2016

Entry Level Assessment Blueprint Electric Power and Distribution

SECTION GROUNDING AND BONDING

CONSTRUCTION SPECIFICATION FOR CABLE INSTALLATION

New Construction Units. a. Includes the furnishing of all labor and equipment for the installation of new construction units.

Apprenticeship Curriculum Standard. Powerline Technician. Level 1. Trade Code: 434A

SECTION GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY

NORTHEASTERN REMC ELECTRIC STANDARDS MANUAL

UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:

PLANNING GUIDE FOR SINGLE CUSTOMER SUBSTATIONS SERVED FROM TRANSMISSION LINES

NORTHEASTERN REMC ELECTRIC STANDARDS MANUAL

CONSTRUCTION SPECIFICATION FOR INSTALLATION OF CABLE

Transmission Line General Requirements Including Typical Overhead Line Structures. Document Number: 1-03-FR-09

Grant PUD. Joint Use Standards. For Pole Attachments including: Cable Television Fiber Optics Telecommunications

SECTION GROUNDING

Electric Service Handbook

Details of technical leaflets/write-up on various pieces of equipment.

TEMPORARY FACILITIES

RESIDENTIAL QUICK REFERENCE

CONSTRUCTION SPECIFICATION FOR GROUNDING

CONSTRUCTION SPECIFICATION FOR INSTALLATION OF CABLE

DOCUMENT SCHEDULE OF UNIT BID PRICES

CONSTRUCTION SPECIFICATION FOR POLE ERECTION

CONSTRUCTION SPECIFICATION FOR INSTALLATION OF POWER SUPPLY EQUIPMENT

OVERHEAD SERVICES - RESIDENTIAL & GENERAL SERVICE. See Chapter 3, Section 3.01 for more information about point of entrance (POE).

Innovative New Live Line Tool and Framing Designs Facilitating Safe and Efficient Cross-arm Replacement

500 KV. Deadend insulator changeout HOT STICK TRAINING

Residential Electric Policy

AREMA C&S Manual 2018 (Includes 2018 Revisions) Volume 4 Index SECTION 14 - ELECTRICAL DEVICES, FOUNDATIONS, HARDWARE

UNIFIED FACILITIES GUIDE SPECIFICATIONS

SPECIAL SPECIFICATION 1924 Neighborhood Friendly High Mast Illumination System

6. SECONDARY SERVICES (under 600 volts) 6.1 AVAILABILITY For the electrical characteristics of available secondary services see Section 3.4.

SECTION CHAIN-LINK FENCES AND GATES 02821/1

General Symbols, Ducts and Cables

SECTION GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS

CONTENTS. B. System Design and Performance Requirements

(Condensed from National Electric Code)

SECTION GROUNDING AND BONDING

Northeastern Joint Apprenticeship & Training Committee 1513 Ben Franklin Highway Douglassville, PA Tel Fax

ELECTRICAL SERVICE REQUIREMENTS FOR MOBILE HOME DEVELOPMENTS

DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7

16300 HIGH VOLTAGE DISTRIBUTION

SECTION G40 SITE ELECTRICAL UTILITIES 11/10

TEMPORARY METER POLE INSTALLATION

TEMPORARY PROTECTIVE GROUNDING EQUIPMENT

UNDERGROUND SERVICES SECONDARY

Pre-Qualification Certificate

A. Product Data shall be provided for each type of product indicated.

SPECIAL SPECIFICATION 6499 Environmentally controlled Communications Building

ELECTRICAL SERVICE UPGRADE RESIDENTIAL AND COMMERCIAL QUICK INFORMATION REFERENCE

General Symbols, Ducts and Cables

CHAPTER 13 GROUNDING AND BONDING

Essex County College - West Essex Campus Addition And Renovations dlb # / SECTION CABLE TRAYS FOR COMMUNICATIONS SYSTEMS

6. SECONDARY SERVICES (under 600 volts) 6.1 AVAILABILITY For the electrical characteristics of available secondary services see Section 3.4.

A. This Section includes steel cable trays and accessories.

Underground Residential Distribution (Specifications for Installation) PES March 2008 Spec 11

General Symbols, Ducts and Cables

Engineering Specifications February, 2004 Schedule H to Bylaw 7452, Subdivision Bylaw Page 105 ELECTRICAL DETAILS. base. base. base.

Apprenticeship Training Standard. Powerline Technician. Trade Code: 434A. Development Date: January 2003

Product Catalogue Telecommunication Hardware

Series IEEE 1070 ERS

OTHER DISTRIBUTION ONE PIECE WILDLIFE PROTECTOR

SECTION SECONDARY UNIT SUBSTATIONS

SECTION SIGNAL SYSTEMS MISCELLANEOUS PRODUCTS

This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update.

CS-21 STREET STRUCTURES TABLE OF CONTENTS

Title Transmission Line Maintenance Standards. Reference Number PMP 17 - (RIC Standard: EP SP)

STANDARD TECHNIQUE : OH4L/1

This guide can be used to prepare a specification for incorporating wall bracket jib cranes into a competitively bid construction project.

Transmission Silicone Insulators Line Post 69 kv to 230 kv

600 GROUNDING 9/12/2018

ELECTRICAL SAFETY INSPECTION REPORT

Powerline Technician On-the-Job Training Guide

TS 804 CABLES TABLE OF CONTENTS TRAFFIC SIGNAL EQUIPMENT POLE WIRING DIAGRAM LOCATIONS WITH CENTRE MEDIANS

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

04.00 GENERAL SECONDARIES & SERVICES SECONDARY AND SERVICE CABLE SPLICES INSULATED SERVICE ENTRANCE COMPRESSION CONNECTORS 04.

DIVISION 26 RACEWAYS AND BOXES FOR ELECTRICAL SYSTEMS PART 1 - GENERAL RELATED DOCUMENTS

Kaf-Tech Product Specification

Commercial Electric Policy

SECTION PART 1 GENERAL

1.2 ACTION AND INFORMATIONAL SUBMITTALS.1 Provide submittals in accordance with Section Submittal Procedures.

SECTION GROUNDING AND BONDING

HIGH MAST CAMERA POLE ASSEMBLY GENERAL

Please check with your local inspection authority for any additional requirements before installation.

3. Intermediate metal conduit (IMC). 4. Electric metallic tubing (EMT). 5. Flexible metal conduit (FLEX). 6. Polyvinyl chloride conduit (PVC).

SERVICES CHAPTER 35. wire. For all other installations, the rating of the ungrounded conductors shall be not less than 60 amperes.

QUALITY AND INNOVATION IN TR

ELECTRICAL SAFETY INSPECTION REPORT.

SECTION GROUNDING AND BONDING

The Canadian Electrical Code (Saskatchewan Amendments) Regulations, 1999

Why do Transmission Asset Owners Need a Transmission Restoration System (ERS)? Transmission Line Emergencies Do Occur

UNIFIED FACILITIES GUIDE SPECIFICATIONS. Use for Southeast projects only **************************************************************************

Electric Service Standards

OVERHEAD SERVICE. Table of Contents - Section 400

SECTION ENCLOSED BUS ASSEMBLIES

SECTION 4 - SECONDARY CONSTRUCTION OVERHEAD TABLE OF CONTENTS

Revisions for the 2015 Edition of the "Specifications and Requirements for Electric Installations (Bluebook)"

UNIFIED FACILITIES GUIDE SPECIFICATIONS

Transcription:

Cutouts and Fuse Links Equipment to protect against faults and over-current conditions on power distribution systems. Open-Type Cutouts Linkbreak Cutouts Loadbreak Cutouts Cutout-Arrester Combinations Polymer Cutouts Primary Fuse Links Overhead Distribution Switches & Reclosers Equipment used to control and route the flow of power through electrical lines. Reclosers help protect the system. Hookstick Switches Automation-Ready Switches Line Tension Disconnects By-Pass Switches Motor Operators Single Phase Reclosers Cable Accessories Products to connect, sectionalize and protect underground cable systems. 200A Loadbreak Products 600A Loadbreak Products Elbow Arresters Arresters Equipment to protect against over voltages such as lightning or switching. Station Class (Polymer & Porcelain) Protecta*Lite Systems (Polymer) Intermediate Class (Polymer) Distribution Class (Polymer) ANSI and IEC Designs Riser Pole (Polymer) Distribution (Polymer) Arrester Underground Switches Dead-front units for underground distribution sectionalizing in a wide variety of circuit configurations. Pad-Mounted Switches Switch-Fuse Cabinets Air-Insulated Switches Motor Operators Above ground & Underground Enclosures & Pads Backflow Enclosures Electrical Equipment Traffic Signal Cabinet Boxes Cabinet Pads Box Pads Manhole Covers Pedestals Wall Boxes Sectionalizing Cabinets

Hot Line Tools All types of tools mounted on Epoxiglas insulated poles. Used to maintain energized high-voltage lines. Insulated Load-Handling Tools Storage and Transport Trailers Insulated Hand-Held Sticks Insulated Hot-Line Ladders Platforms and Accessories Rubber Line Hose Cover-Up and Barriers Meters and Instruments Telescoping Tools Deadend Tools Conductor-Support Tools Jumpering Equipment Rubber Insulating Gloves & Sleeves Resettable Sectionalizers The sectionalizer offers a convenient way of isolating sections of distribution systems in the event of a permanent fault, while eliminating outages due to temporary faults. The resettable design eliminates the need to change the consumable actuator every time the sectionalizer operates. Construction Tools Tools and accessories for building overhead, outside plant and underground power lines. Capstan Hoists Chain Hoists Nylon Strap Hoists Construction Ladders Ropes and Slings Bags and Buckets Pole-Handling Tools Temporary-Grounding Equipment Clamps and accessories to help promote the safety of linemen while doing maintenance work on temporarily dead lines. Grounding Clamps Grounding Cable Substation Grounding Sets Underground Distribution Grounding Sets Drain Systems Transportation Presloped Trench Industrial Flooring Foundation Ventilation

Anchors and Foundations Anchors help hold erect overhead power and communication lines. Foundations support towers, streetlight standards and apparatus. Screw Anchors Expanding Anchors Plate Anchors Rock Anchors Installing Tools Foundation Screw Piles HeliCAP Engineering Software HELICAL PULLDOWN Micropiles Tiebacks Resistance Piers Capacitance-Graded Bushings For transformers and oil circuit breakers and most other power apparatus where HV bushings are used. Bushings Test Terminals Bushing Repair Wildlife Protectors Equipment Locks Polypropylene wildlife protectors guard bushings. Locks secure equipment. Bushing Protectors Tamper-proof Locks Formed-Wire Products Precision machine-spiralled wire products for deadending and conductor tying. Deadend Grips for Guy Strand Insulator Ties Splices, Deadends, Dampers, Fittings and Accessories Automatic Line Splices GDW Wedge Deadend Compression Fittings Stockbridge Dampers Pole Line Hardware Galvanized-steel and aluminum fixtures and extruded plastic materials are used in overhead, outside plant and underground line construction. Anchor Rods Bolts & Nuts Brackets & Plates Cable Clamps Cable Guards Cable Positioners Cable Racks Cable Route Markers Capacitor Racks Clevises & Wireholders Conduit Standoffs Fiberglass Pedestals Ground Rods Ground-Rod Clamps Guy Guards Guying Bolts & Clamps Hangers Manhole Ladders Pins & Racks Platforms Pole Bands Pole Steps Staples Steel Suspension Arms Transformer Mounts Insulators Polymer insulators for transmission and distribution lines. Transmission Insulators Suspension Insulators Line Post Insulators Station Post Insulators Distribution Insulators Suspension Insulators Station Post Insulators

Narrow-Profile Fiberglass Construction Pole-framing accessories and conductor accessories for electrical transmission and distribution systems. Poletop Pins Vertical Pins Horizontal Pins Apparatus Mounts Deadend Arms Guy Strain Insulators Machine Bolt Pole Cover Square Washer Crossarm Brace Serving Sleeve Double-Arming Bolt Connectors and Crimping Tools Transmission, distribution and substation products, including connectors, clamps, line and tower hardware. Hot Line Clamps Stirrup Clamps Suspension Clamps Deadend Clamps Substation Connectors Connector Die Sets Crimping Tools Vise-Type Connectors Versa-Crimp Tools Suspension Clamp Washer/Nut Cable Extension Arm Lag Screw Licensee Cable No. 6 Ground Cable Telephone Cable Telephone Company Bronze Te rminal Connector Reinforcing Strap (using bolt) Reinforcing Strap (with nut & washer) Angle Thimble Eye Bolt Guy Hook Thimble Eye Bolt Driver Hook Machine Bolt Molding Round Washer Curved Washer Guy Hook Guy Clamp Plastic Molding Standoff Bracket Insulating Conduit Lashing Wire Clamp Bonding Clamp Drop Forged Eye Nut Guy Marker Underground Cable Racks & Hooks Pole Step Molding Strap Transmission, Distribution, & Substation Power Switches Detachable Pole Step Lag & Plate for Detachable Pole Step Cable Guard Cable Guard Strap Automatic Dead-End Ground Rod Bonding Clamp Single Eye Nut Auxiliary Eye PISA Rod Center Break Center Break V Side Break Vertical Break Double Center Break Screw Anchor TOUGH-ONE Anchor

Bulletin 19-9106 rev 9/09 Copyright 2009 Hubbell Power Systems, Incorporated AG-9/09