EXCELLENCE IN CORROSION RESISTANCE Lined Pipes and Fittings ULTIMATE CORROSION RESISTANCE
For 40 years, Engiplas has been operating in the field of engineering and production of Lined pipes and fittings. Light duty and super heavy duty, standard products and tailor made products are supplied frequently, thanks to our ongoing improvement in the production technologies and the material selection. Engiplas s spectrum of lined pipes and fittings is one of the broader lines of products available in the lined fittings market. Small diameters as well as big ones, standard shapes as well as special shapes, wider diversity of lining materials, different construction materials, and more. Years of proven success with our Lined equipment, has verified our products to be safe, reliable, maintenance free and cost effective. Quality assurance Our premier goal is to see content customers. This is why we devote our extensive efforts toward the highest quality levels we can achieve. Production monitoring is carried out according to Engiplas s quality control management program which was approved by the ISO 9001/2008, PED 97/23/EC and by the ASME and ASTM standards Implemented tests: Density tests Visual inspections Dimensional inspections Hydro tests at 1.5 times than the design pressure Vacuum tests Spark tests Thermal tests Liner thickness inspection Painting / Coating thickness inspection
Standard products Lined Pipe Lined Spacer Lined Elbow 90 Deg. Lined Elbow 45 Deg. Lined Equal Tee Lined Cross Lined Reducing Tee Lined Red Cross
Standard products Lined Instrument Cross Lined Instrument Tee Lined concentric reducer lined eccentric reducer Lined Reducing Flange Lined Blind Flange Lined Pipe with Steam Jacket Lined firring with jacket
Standard products Lined Dip Pipe Solid Dip Pipe Lined Bend Dip Pipe Lined Latral Tee Lined Sight Glass Sight Glass Swing Check Valve Bellow
Non Standard products A new industrial piping system assuring fluid contact to PTFE Double layer pipe: HDPE or XLPE outside, PTFE/PFA liner Inside Various liners thickness: 0.5-8 mm ( 20 Mil - 315 Mil ) Working pressures : 1 / +10 bar ( full vacuum up to 145 PSI) Working Temperatures: - 90 / + 140 deg c ( - 138 / + 284 F ) Diameters: DN 25 up to DN500 ( 1 up to 20 ) Elbows 45 deg & 90 deg in short radius (R = 1.5D) up to (R = 5D) Steel coated flanges or Solid plastic flanges Equal & reducing tees Concentric & eccentric reducers
Main products features Ultimate corrosion resistance. Full PH range. Free of inner media build up. Working temperatures -29ºC ( - 20 F ) to +220ºC (428 F ). Full vacuum to +10 bar g (150 psi ) Diameters from DN 15 (0.5 ) to DN 2000 (80"). Construction codes acc to ASME B16.5 or DIN 2848 / 2874 Flanges acc to ASA150 /300, DIN PN10 / 16 / 25/ 40, Gust and jis 10 / 20. Single length lined steel pipes up to 6 meters ( 20 feet ) Single length lined plastic pipes up to 20 meters ( 60 feet ) Liners wall thickness up to 12.5 mm ( 0.5 ) Homogeneous, seamless linings Material Working Temperatures Deg C Chemical Resistance Comments PTFE -100 to 225 Supreme PTFE-M -100 to 225 Supreme PFA -100 to 225 Supreme FEP -100 to 190 Excellent ETFE -50 to 150 Excellent ECTFE -50 to 150 Excellent PVDF -5 to 110 Very good PP 0 to 90 Good XLPE -10 to 85 Good Thermosetic, Suitable for high-purity applications, exceptional non-stick properties, high thermal stability and longest flex life Modified PTFE, Suitable for high-purity applications, exceptional non-stick properties, high thermal stability, lower permeation rates and better mechanical properties Thermoplastic, Suitable for high-purity applications, non-stick properties, lower permeation rates, high thermal stability and long flex life Thermoplastic, exceptional non-stick properties, high thermal stability Thermoplastic, high thermal stability, lower permeation rates, outstanding abrasion & tear resistance, better mechanical properties Thermoplastic, high thermal stability, outstanding abrasion & tear resistance, better mechanical properties Thermoplastic, lower permeation rates outstanding abrasion resistance, better mechanical properties Thermoplastic, very good abrasion resistance, low cost material. Thermosetic, supreme abrasion resistance the best there is, low cost material.
About Engiplas Engiplas Ltd, began its activity in 1974 in Pardess-Hana Israel, as a fabricator of fluoroplastics products for the Chemical industry. During the years, it has expanded its range of services within the chemical industry and in to other industries such as Biotechnologies, semiconductors, electrical, medical & food. Unique solutions to complex problems are facilitated by the cooperation between our in-house divisions engineering, metal fabrication, metal welding, Rotational lining & molding, Coating, conventional linings, injection and transfer molding, CNC machinery, and quality control.