Product Catalogue Coatings, Inks and Adhesives for Rigid Metal Packaging
Index Page ACTEGA Rigid Packaging at a glance 3 Coatings, Inks and Adhesives for the following metal packaging end uses Cans - General Line, 2- & 3-piece Food, 3-p Aeosols 4-11 Ends - Easy Open Ends, Open Top Ends, Fully Aperture Open Ends, Peel Off-Ends 12-19 Monobloc-Aerosols 20-21 Aluminum-Bottles 22-23 Tubes 24-25 Drums 26-27 Decorative Packaging 28-29 Global Presence ACTEGA 30 Your Contacts within ACTEGA 31 Disclaimer 31 For can sealants, please refer to our separate catalogue by ACTEGA Artistica.
ACTEGA Rigid Packaging at a glance Product Lines Our complete product offering of specialty Coatings, Sealing Compounds, Inks and Adhesives makes ACTEGA a global and trusted partner in metal packaging and decoration? Coatings (solvent based, waterbased and UV curing)? Sealants (waterbased), Lining Equipment? Inks (oil-based and UV curing)? Adhesives (solvent based)? Customized solutions for steel and aluminum? Products for key applications e.g.food cans, can ends, beverage, containers, drums & pails and aerosol cans? Extensive regulatory knowledge. Continuous monitoring of regulatory updates To provide our customer with safe and reliable product solutions for highly regulated markets like food and beverage is our top priority. End Use? General Line Cans? Food/B&B-Cans? Ends (Can Ends, EOE, POE)? Aluminum Bottles? Tubes? Drums, Pails? Aerosols? Domes & Tops? Decorative & Specialty Effect Cans 3
Cans General Line, 2 & 3-piece Food, 3-p Aerosols (1/4) Productname Product Function Application Area Solids Film Thickness 2piece 3piece food non-food exterior interior % g/m2/dry ACTEcoat EB-5015-108 Basecoat X X X X X 57 15 ACTEcoat GL-79-OVN Gold lacquer X X X X X X 41 5 ACTEcoat GL300-MF Gold lacquer X X X X X X 47 5 ACTEcoat GL360-MF Gold lacquer X X X X X X 48 5 ACTEcoat AL-96 Gold lacquer X X X X 40 7 ACTEcoat AL-300-MF Gold lacquer X X X X 48 7 ACTEcoat GL-115-KL Gold lacquer X X X X X X 35 5,5 ACTEcoat AL-92-140-M Gold lacquer X X X 36 8 ACTEcoat GL-112-10 Gold lacquer X X X X X 40 4,5 ACTEcoat WL107910 Gold lacquer X X X 35 5 ACTEseal TN-360-858 Heat Seal Lacquer X X X X X X 43 8,5 ACTEseal TN-111-F Heat Seal Lacquer X X X X 30 9 ACTEseal TN-111-1500 Heat Seal Lacquer X X X X X 31 9 ACTEseal TN-551-MF-02 Heat Seal Lacquer X X X X X 44 10 ACTEcoat GLO-095 Organosol X X X 45 9 ACTEcoat S-348-NF Overprint varnish X X X X X 50 6 ACTEcoat S-143-502 Overprint varnish X X X X X 42 5 4
BPA-NI MF-NI Food contact regulations (e.g. FDA) X* = indirect contact Product Description Cans General Line, 2 & 3-piece Food, 3-p Aerosols (1/4) Company X X X* White X X X High coating speed, excellent wetting properties, different gold shades available X X X High flexibility, sterilisation resistant X X High flexibility, sterilisation resistant, excellent acid resistance X X Alu-pigmented, flexible, stain resistant, gold, colorshades available X X X Alu-pigmented, flexible, good product resistance, gold, colorshades available X X Extremely good flexibility, good resistance against acid X X Stain resistant, meat-release, alu-pigmented X Excellent resistance X X Good flexibility X X X Gold single coat X X Single coat X X Good product resistance, in combination with WZ-279-10 (then TN-111-1510 to be used) X X X Good product resistance, can be used as single coat or in combination with GR-500-MF (alu) or GR-510-MF-02 (tinplate / TFS), white X X Fish cans and easy-open ends for fish cans X X X* BADGE-NI primer, base coat necessary, good flexibility, can be coated wet-in-wet X X X* Suitable for direct on metal, good flexibility 5
Cans General Line, 2 & 3-piece Food, 3-p Aerosols (2/4) Productname Product Function Application Area Solids Film Thickness 2piece 3piece food non-food exterior interior % g/m2/dry ACTEcoat S-160-H Overprint varnish X X X X 37 5 ACTEcoat S-143-VN110 Overprint varnish X X X X 37 4,5 ACTEcoat EF-series Overprint varnish X X X X 41 6 ACTEcoat GR-113 Primer X X X X X 31 3 ACTEcoat GR-500-MF Primer X X X X 47 8 ACTEcoat GR-510-MF-02 Primer X X X X X 47 8 ACTEcoat WZ-279-10 Primer X X X X X 43 8 ACTEcoat WL109086 Primer X X X 42 11 ACTEcoat EB-106002 Primer X X X 45 12 ACTEcoat GR-5023-series Primer X X X X 30-61 4-19 ACTEcoat SL-693-20 Protective X X X X X 38 5 ACTEcoat WZ-277-26 Protective X X X X 52 14 ACTEcoat WZ-500-MF Protective X X X X 46 13 ACTEcoat SL-5000-M Protective X X X 40 5 ACTEcoat SL-5100-M Protective X X X X 42 5 ACTEcoat SL-693-557 Protective X X X X X X 38 5 ACTEcoat WL107920 Protective X X X 50 7 6
BPA-NI MF-NI Food contact regulations (e.g. FDA) X* = indirect contact Product Description Cans General Line, 2 & 3-piece Food, 3-p Aerosols (2/4) Company X X* Single coat or in combination with stamping enamel EB-5108-series X* High scratch resistance, can be coated wet-in-wet X* Entire series available, as intermediate coat in a system with base and top coat X X UV & conventional colors printable, excellent flexibility X X X In combination with heatseal laquer TN-551-MF-02 used for round and fish cans, white X X X In combination with heatseal laquer TN-551-MF-02 used for round and fish cans, white X X In combination with heatseal laquer TN-111-1510 used for round and fish cans, white. X X One layer coating possible, particularly resistant against water-based dispersions, can be used with SL-693-20, GL-115-KL and WL107920 top coats X X Primer for WL105728, IP-100-OS or WL107031 X X* Very good flexibility, large color selection available X Sterilisation resistant, colorless X X Universal coating, high surface hardness, excellent sterilisation resistance against acids, white, colorshades available X X X Flexible, good product resistance, white, colorshades available X X On standard gold, aluminium or white for meat-release X X X Flexible, meat-release X X Cans for printing inks X X* Organosol, recoating in combination with WL 109086 for the internal coating of technical packagings, waterbased products 7
Cans General Line, 2 & 3-piece Food, 3-p Aerosols (3/4) Productname Product Function Application Area Solids Film Thickness 2piece 3piece food non-food exterior interior % g/m2/dry ACTEcoat WL107031 Protective X X X 58 9 ACTEcoat IP-100-OS Protective X X X 56 48 ACTEcoat SL-693-Z Protective X X X X 38 5 ACTEcoat NA-424 Spray Coating X X X 28 10 ACTEcoat NA-425 Spray Coating X X X 51 ACTEcoat EB-5108-series Stamping Enamel X X X X X 60 14 ACTEcoat EB-5508-9320 Stamping Enamel X X X X X 68 14 72KM350/2 Basecoat X X X X X 68 14 RLC 23052/3 Basecoat clear X X X X X X 38 4 01KM16/4 Basecoat clear X X X X X 41-43 2,5 RLC 16052/4 Gold varnish X X X X X X 41 5 RLC 26024/9 Overprint varnish X X X 43 5 75KM414 Overprint varnish X X X X X 46 5 75KM366/3 Overprint varnish X X X X X 47 5 75KM366/4L Overprint varnish X X X X X 47 5 Metalfix - Product Line 50 Ink X X X X X > 95 0,1-1 Polifix -Product Line 55 Ink X X X X X > 95 0,1-1 8
BPA-NI MF-NI Food contact regulations (e.g. FDA) X* = indirect contact Product Description Cans General Line, 2 & 3-piece Food, 3-p Aerosols (3/4) Company X X* Top coat for EB-106002, system shows excellent resistance against solventcontaining products X X Shows excellent resistance X Suitable for dry fabrication X X Inside and outside coating of welded seams, repair coating X* Mixing rate 2-compent seam protective coating NA-424 : hardener NA-425 : 2:1 X X X* Excellent flow, UV & conventional colors printable, white, colorshades available X X X* Good flexibility, UV & conventional colors printable, white colorshades available X X Excellent flexibility. BPA free - Melamine free, white X X X BPA/BADGE/MF- NI. Meets FDA 175,300. Can be used as basecoat or as varnish on direct metal. For internal and/or external side X X Can be used for body and easy open ends. BPA free - Melamine free X X X BPA/BADGE/MF- NI. Meets FDA 175,300. Can be used as basecoat or as varnish on direct metal. For internal and/or external side X X X Excellent abrasion resistance, recoatable by itself, repairable, suitable for expanding, FDA X Suitable for DRD Can, Tin plate, TFS or Aluminuim over White or Clear B/C. Very good flexibility X Suitable for DRD Can, Tin plate, TFS or Aluminuim over White or Clear B/C X Good properties for wet on wet application X X X For food packaging and GL X X X Excellent coverage. 9
Cans General Line, 2 & 3-piece Food, 3-p Aerosols (4/4) Productname Product Function Application Area Solids Film Thickness 2piece 3piece food non-food exterior interior % g/m2/dry Sintetica - Product Line 57 Ink X X X X X > 95 0,1-1 UV Metal GL - Product Line 25 (nonfood) Ink > 95 0,1-1 UV Metal FP - Product Line 25 (food) Ink X X X X > 95 0,1-1 Polistar - Product Line 60 (B&B) Ink X X X X > 95 0,1-0,6 UV System - Product Line 20 OPV and Size X X X X 100 4-8 Polyester/PU Enamels Basecoat X X X X X Polyester/PU Enamel Interior Basecoat X x X X X Acrylic Enamels Basecoat X X X X X Epoxy Varnishes Protective X X X X X X Epoxy Enamel Protective X X X X Acrylic Varnishes Topcoat X X X X X Acrylic Varnish Interior Topcoat X X X X X Polyester/PU Varnishes Top Coat X X X X X 10
BPA-NI MF-NI Food contact regulations (e.g. FDA) X* = indirect contact Product Description Simultaneous cure with UV. Cans General Line, 2 & 3-piece Food, 3-p Aerosols (4/4) Company X X Excellent printability, wide varnish compatibility, good water-balance X X X Excellent printability, wide varnish compatibility, good water-balance X X Excellent machine compatibility, low misting and good thermal drying Good application results for aerosol 3 pc/ General Line Cans as well as efficient for Size Coat Basecoat for Aluminum Tubes, Monoblocs, Bottles, GL, Crown Caps, ROPP, very diverse product Basecoat for Acrylic Varnish Top Coat - alternative for BPA System Basecoat for 2 and 3 piece cans, accepts inks and coating well Suitable for DRD, Deep Draw, Shallow Draw Cans, EOE Good chemical resistance Top Coat for 2 and 3 piece-cans Top Coat Polyester Enamel Internal High Abrasion Resistance 11
Ends (EOE, OTE, FAEO, POE), Domes & Tops (1/4) Productname Product Function Application area EOE for B&B exterior EOE for B&B interior OTE food exterior OTE food interior OTE FAEO POE Domes & Tops (Easy Open Ends) (Easy Open Ends) (Open Top-Ends*) (Open Top-Ends*) (Open Top-Ends*) (Full Aperture Easy Open) (Peel-off-ends) ACTEcoat GL-79-OVN Gold lacquer X X X ACTEcoat GL300-MF Gold lacquer X X X ACTEcoat GL360-MF Gold lacquer X X X ACTEcoat AL-96 Gold lacquer X ACTEcoat AL-300-MF Gold lacquer X X ACTEcoat GL-115-KL Gold lacquer X X X ACTEcoat AL-92-140-M Gold lacquer X ACTEcoat GL-112-10 Gold lacquer X X X ACTEcoat 71 KT 408/5 Gold lacquer X X ACTEcoat WL107910 Gold lacquer X ACTEseal TN-111-1500 Heat Seal Lacquer X ACTEseal TN-551-MF-02 Heat Seal Lacquer X ACTEseal TN-360-8 Heat Seal Lacquer X ACTEseal TN-360-858 Heat Seal Lacquer X * with no opening-function 12
Ends (EOE, OTE, FAEO, POE), Domes & Tops (1/4) Solids Film Thickness BPA- NI MF- NI Food contact regulations Product Description Company exterior interior food nonfood (e.g. FDA) % g/m2/dry X* = indirect contact X X X X 41 5 X X X High coating speed, excellent wetting properties, different gold shades available X X X X 47 5 X X X High flexibility, sterilisation resistant X X X X 48 5 X - X High flexibility, sterilisation resistant, excellent acid resistance X X 40 7 X X Alu-pigmented, flexible, stain resistant, gold, colorshades available X X 48 7 X X X Alu-pigmented, flexible, good product resistance, gold, colorshades available X X X X 35 5,5 X X Extremely good flexibility, good resistance against acid X X 36 8 X Stain resistant, meat-release, alu-pigmented X X X 40 4,5 X Excellent resistance X 35 5 X Good resistance, also suitable for body of 3p Aerosol cans X X 35 5 X X Good flexibility X 31 9 X X Good product resistance, in combination with WZ-279-10 (then TN-111-1510 to be used ) X 44 10 X X X Good product resistance, can be used as single coat or in combination with GR-500-MF (alu) or GR-510-MF-02 (tinplate / TFS), white X 42 9 X X X Single coat for dry packs X 43 8,5 X X X Gold single coat 13
Ends (EOE, OTE, FAEO, POE), Domes & Tops (2/4) Productname Product Function Application area EOE for B&B exterior EOE for B&B interior OTE food exterior OTE food interior OTE FAEO POE Domes & Tops (Easy Open Ends) (Easy Open Ends) (Open Top-Ends*) (Open Top-Ends*) (Open Top-Ends*) (Full Aperture Easy Open) (Peel-off-ends) ACTEcoat GLO-095 Organosol X ACTEcoat S-348-NF Overprint varnish X X ACTEcoat S-143-502 Overprint varnish X X ACTEcoat S-160-H Overprint varnish X ACTEcoat S-143-VN110 Overprint varnish X X ACTEcoat S-133-1 Overprint varnish X ACTEcoat GR-113 Primer X X ACTEcoat GR-500-MF Primer X X X ACTEcoat GR-510-MF-02 Primer X X X ACTEcoat WZ-279-10 Primer X ACTEcoat WL109086 Primer X ACTEcoat EB-106002 Primer X ACTEcoat SL-693-20 Protective X X * with no opening-function 14
Ends (EOE, OTE, FAEO, POE), Domes & Tops (2/4) Solids Film Thickness BPA -NI MF- NI Food contact regulations Product Description Company exterior interior food nonfood (e.g. FDA) % g/m2/dry X* = indirect contact X 45 9 X X Fish cans and easy-open ends for fish cans X X X 50 6 X X X* BADGE-NI primer, base coat necessary, good flexibility, can be coated wet-in-wet X X X 42 5 X X X* Suitable for direct on metal, good flexibility X X 37 5 X X* Single coat or in combination with stamping enamel EB-5108-series X X X 37 4,5 X* High scratch resistance, can be coated wet-in-wet X X 35 5,5 X X* Good scratch resistant X X X 31 3 X X UV & conventional colors printable, excellent flexibility X X 47 8 X X X In combination with heatseal laquer TN-551-MF-02 used for round and fish cans, white X X 47 8 X X X In combination with heatseal laquer TN-551-MF-02 used for round and fish cans, white X 43 8 X X In combination with heatseal laquer TN-111-1510 used for round and fish cans, white X X 42 11 X X One layer coating possible, particularly resistant against water-based dispersions, can be used with SL-693-20, GL- 115-KL and WL107920 top coats. X X 45 12 X X Primer for WL105728, IP-100-OS or WL107031 X X X X 38 5 X Sterilisation resistant, colorless 15
Ends (EOE, OTE, FAEO, POE), Domes & Tops (3/4) Productname Product Function Application area EOE for B&B exterior EOE for B&B interior OTE food exterior OTE food interior OTE FAEO POE Domes & Tops (Easy Open Ends) (Easy Open Ends) (Open Top-Ends*) (Open Top-Ends*) (Open Top-Ends*) (Full Aperture Easy Open) (Peel-off-ends) ACTEcoat WZ-277-26 Protective X ACTEcoat WZ-500-MF Protective X ACTEcoat SL-5000-M Protective X ACTEcoat SL-5100-M Protective X X ACTEcoat SL-693-557 Protective X X ACTEcoat WL107920 Protective X ACTEcoat WL107031 Protective X ACTEcoat IP-100-OS Protective X ACTEcoat SL-693-442 Protective X X ACTEcoat NA-424 Spray Coating X ACTEcoat NA-425 Spray Coating X ACTEcoat EB-5108-series Stamping Enamel X X ACTEcoat EB-5508-9320 Stamping Enamel X X * with no opening-function 16
Ends (EOE, OTE, FAEO, POE), Domes & Tops (3/4) Solids Film Thickness BPA- NI MF- NI Food contact regulations Product Description Company exterior interior food nonfood (e.g. FDA) % g/m2/dry X* = indirect contact X X 52 14 X X Universal coating, high surface hardness, excellent sterilisation resistance against acids, white, colorshades available X X 46 13 X X X Flexible, good product resistance, white, colorshades available X X 40 5 X X On standard gold, aluminium or white for meat-release X X 42 5 X X X Flexible, meat-release X X X 38 5 X X Cans for printing inks X X 50 7 X X* Organosol, recoating in combination with WL 109086 for the internal coating of technical packagings, water-based products X X 58 9 X X* Top coat for EB-106002, system shows excellent resistance against solventcontaining products X X 56 48 X X Shows excellent resistance X X X 34 4 X Gold lacquer, UV-resistant, also suitable for rotary screen coating X 28 10 X X Inside and outside coating of welded seams, repair coating X 51 X* Mixing rate 2-component seam protective coating NA-424 : hardener NA-425 : 2:1 X X X 60 14 X X X* Excellent flow, UV & conventional colors printable, white, colorshades available X X X 68 14 X X X* Good flexibility, UV & conventional colors printable, white colorshades available 17
Ends (EOE, OTE, FAEO, POE), Domes & Tops (4/4) Productname Product Function Application area EOE for B&B exterior EOE for B&B interior OTE food exterior OTE food interior OTE FAEO POE Domes & Tops (Easy Open Ends) (Easy Open Ends) (Open Top-Ends*) (Open Top-Ends*) (Open Top-Ends*) (Full Aperture Easy Open) (Peel-off-ends) 01KM16/4 Basecoat clear X RLC 23052/3 Basecoat clear X X X RLC 16052/4 Gold varnish X X X 71 KM 292 HES Overprint varnish X Metalfix - Product Line 50 Ink X X X X Polifix -Product Line 55 Ink X X X X Sintetica - Product Line 57 Ink X X X X UV Metal GL - Product Line 25 (non-food) UV Metal FP - Product Line 25 (food) Ink X X Ink X X Polistar - Product Line 60 (B&B) Ink X Polyester/PU Enamel Interior Basecoat X Acrylic Varnish Interior Topcoat X Epoxy Varnishes Varnish X X X Polyester/PU Varnishes Varnish X * with no opening-function 18
Ends (EOE, OTE, FAEO, POE), Domes & Tops (4/4) Solids Film Thickness BPA- NI MF- NI Food contact regulations Product Description Company exterior interior food nonfood (e.g. FDA) % g/m2/dry X* = indirect contact X X 41-43 2,5 X X Can be used for body and easy open ends. BPA free - Melamine free X X X X 38 4 X X X BPA/BADGE/MF- NI. Meets FDA 175,300. Can be used as basecoat or as varnish on direct metal. For internal and/or external side X X X X 41 5 X X X BPA/BADGE/MF- NI. Meets FDA 175,300. Can be used as basecoat or as varnish on direct metal. For internal and/or external side X 45 5 On stamping enamel, can be coated wet-in-wet, H2O2-resistant X X X > 95 0,1-1 X X X For food packaging and GL X X X > 95 0,1-1 X X X Excellent coverage X X X > 95 0,1-1 X Simultaneous cure with UV X X > 95 0,1-1 X X Excellent printability, wide varnish compatibility, good water-balance. X > 95 0,1-1 X X X Excellent printability, wide varnish compatibility, good water-balance. > 95 0,1-0,6 X X Excellent machine compatibility, low misting and good thermal drying. X Basecoat for Acrylic Varnish Top Coat - alternative for BPA System X Top Coat Polyester Enamel Internal X X X X Suitable for DRD, Deep Draw, Shallow Draw Cans, EOE X High Abrasion Resistance 19
Monobloc-Aerosols Productname Product Function Application Area Solids Film Thickness BPA-NI MF-NI Food contact regulations (e.g. FDA) exterior interior % µm X* = indirect contact RLCG30035/2 Basecoat X 40 5 RLC 15070/2 Basecoat X 62 18-20 71KL150/4 BT HV (Clear) Basecoat X 50 5 72 KM 309/4 BV Basecoat X 48 5 White Coating 71 KL 150/4 BT NF BV Basecoat X 68 15 White Coating T1195 72KM360/4 BV Basecoat X 66 14 71KM295G Overprint varnish X 55 5 RLC 07065 Overprint varnish X 37 5,5 X RLC 10106/4 Overprint varnish X 42 8 X 75KW373/2 Overprint varnish X 42 8 RLC 08065/3 Overprint varnish X 43 5,5 X RLC 10031/4 Protective X 44 6-10 X X RLC 15031 Protective X 42 6-10 X Alumifix -Product Line 52 Ink X > 95 0,1-1 X X X UV Metal GL - Product Line 25 (non-food) Ink X > 95 0,1-1 X X UV Metal FP - Product Line 25 (food) Ink X > 95 0,1-1 X X X Polyester/PU Enamels Basecoat X Epoxy Varnishes Varnish X Polyester/PU Varnishes Varnish X 20
Monobloc-Aerosols Product Description Company Gold versions available, suitable up to 66 mm Excellent flow, Waterbased White Basecoat compatible with Polyester inks Approved by Coca-Cola for Alu Bottles and by Avene for Aerosols, colorshades available Pass hot water bath test - Naphtalene depleted and Isophorone free Approved by Coca-cola for Alu bottle - Approved by Avene Pass Hot water bath test Approved by Coca-Cola for Alu Bottles Overprint Varnish for Pasteurisation (Beer Bottles) Water based technology. Good abrasion resistance. Water based technology. Good abrasion resistance. Water based technology. Good abrasion resistance. Meets FDA regulation with alcooholic restriction. Replace PAM. High chemical resistance. Abrasion resistance, excellent thermal drying. Excellent printability, wide varnish compatibility, good water-balance. Excellent printability, wide varnish compatibility, good water-balance. Basecoat for Aluminum Tubes, Monoblocs, Bottles, GL, Crown Caps, ROPP, very diverse product Suitable for DRD, Deep Draw, Shallow Draw Cans, EOE High Abrasion Resistance 21
Aluminum-Bottles Productname Product Function Application Area Solids Film Thickness BPA-NI MF-NI Food contact regulations (e.g. FDA) exterior interior % µm X* = indirect contact 71KL150/4 BT HV (Clear) Basecoat X 50 5 RLC 06075 Basecoat X 51 5 X White Coating 71 KL 150/4 BT NF BV Basecoat X 68 15 71KM295G Overprint varnish X 55 5 RLC 07065 Overprint varnish X 37 5,5 X RLC 18025/6 Spray Coating X 40 8-10 X X X Alumifix -Product Line 52 Ink X > 95 0,1-1 X X X Polistar - Product Line 60 (B&B) Ink X > 95 0,1-0,6 X X Polyester/PU Enamels Basecoat X Polyester/PU Varnishes Top Coat X 22
Aluminum-Bottles Product Description Company Approved by Coca-Cola for Alu Bottles and by Avene for Aerosols, colorshades available Clear size in combination with RLC 07065 for Pasteurisation (Beer bottles) Approved by Coca-cola for Alu bottle - Approved by Avene Approved by Coca-Cola for Alu Bottles Overprint Varnish for Pasteurisation (Beer Bottles) Colorless, good chemical resistance, without Alcoolic restriction Abrasion resistance, excellent thermal drying. Excellent machine compatibility, low misting and good thermal drying. Basecoat for Aluminum Tubes, Monoblocs, Bottles, GL, Crown Caps, ROPP, very diverse product High Abrasion Resistance 23
Tubes Productname Product Function Application Area Solids Film Thickness BPA-NI MF-NI Food contact regulations (e.g. FDA) food nonfood exterior interior % µ X* = indirect contact ACTEseal HS-251-GR Sealant varnish X X X 32 10 X X X ACTEcoat TGL-57 Spray Coating X X X 36 10 X ACTEcoat 28505-28014 Spray Coating X X 37 9 X X 72KM322 Basecoat X 71 10-15 RLC 10031/4 Protective X X X 44 6-10 X X Alumifix -Product Line 52 Ink X X X > 95 0,1-1 X X X UV Plast - Product Line 22 Ink X X X X X Polyester/PU Enamels Basecoat X X X 66-70 Epoxy Varnishes Varnish X X X 36-40 Polyester/PU Varnishes Varnish X X X 45-49 24
Tubes Product Description Company Heat-sealable tube compound for non-coated and internally coated aluminum tubes Very good acid and alkali resistance LOR-30, viscosity variations available Non varnish base coat, pigmented Meets FDA regulation with alcooholic restriction. Abrasion resistance, excellent thermal drying. Excellent adhesion, good water-balance Excellent flow, excellent "crush" test, white, colors available Very good acid and alkali resistance High Abrasion Resistance 25
Drums Productname Product Function Application Area Solids Film Thickness BPA-NI MF-NI Food contact regulations (e.g. FDA) food nonfood exterior interior % µ X* = indirect contact RLC110602/4 Basecoat X X X 55-65 15-20 79KM351 Basecoat X X X depending on the shade 30KM372 Basecoat X X X depending on the shade 72KM377 Basecoat X X depending on the shade RLC 08123/7 Overprint varnish X X X 100 5 RLC17104 Protective X X X 60 X X RU RLC 110602/3 Stamping Enamel X X X 65 15-20 Metalfix - Product Line 50 Ink X X X > 95 0,1-1 X X X Polifix -Product Line 55 Ink X X X > 95 0,1-1 X X X Sintetica - Product Line 57 Ink X X X > 95 0,1-1 UV Metal GL - Product Line 25 (non-food) Ink X X > 95 0,1-1 X X UV Metal FP - Product Line 25 (food) Ink X X > 95 0,1-1 X X X Polistar - Product Line 60 (B&B) Ink X > 95 0,1-0,6 X X Epoxy Varnishes Protective X X X 26
Drums Product Description Company Very high abrasion resistance, pigmented Application Airless or Airmix Sprayed gun. High bake paint-suitable for simultaneous curing with inside lacquer. Very high abrasion resistance. Very high flexibility, pigmented Application Airless or Airmix Sprayed gun. High bake paint - suitable for simultaneous curing with inside lacquer. Good adhesion on black steel or tin plate. Good hiding power. UV & conventional Inks compatible, pigmented Good gloss, high scratch resistance Food contact. BADGE/BFDGE/NODGE, pigmented Very high abrasion resistance, very good covering power, colorshades available For food packaging and GL Abrasion resistance, excellent thermal drying. Simultaneous cure with UV. Excellent printability, wide varnish compatibility, good water-balance. Excellent printability, wide varnish compatibility, good water-balance. Excellent machine compatibility, low misting and good thermal drying Good chemical resistance 27
Decorative Packaging Productname Product Function Application Area Solids Film Thickness BPA-NI MF-NI Food contact regulations (e.g. FDA) interior exterior % g/m2/dry X* = indirect contact ACTEcoat S-160-H Overprint varnish X 37 5 X X* ACTEcoat EF-series Overprint varnish X 41 6 X* ACTEcoat SL-693-Z Protective X 38 5 X ACTEcoat SL-693-557 Protective X X 38 5 X X* ACTEcoat EB-5035-series Stamping Enamel X X 30-61 4-19 X X* Metalfix - Product Line 50 Ink X > 95 0,1-1 X X X Alumifix -Product Line 52 Ink X > 95 0,1-1 X X X Polifix -Product Line 55 Ink X > 95 0,1-1 X X X Sintetica - Product Line 57 Ink X > 95 0,1-1 UV Metal GL - Product Line 25 (non-food) Ink X > 95 0,1-1 X X UV Metal FP - Product Line 25 (food) Ink X > 95 0,1-1 X X X Polistar - Product Line 60 (B&B) Ink X > 95 0,1-0,6 X X Polyester/PU Enamels Basecoat X 66-70 12-18 Acrylic Enamels Basecoat X 65-69 12-18 UV System - Product Line 20 OPV and Size X 100 4-8 Epoxy Varnishes Protective X X 32-36 4-8 Epoxy Enamel Protective X 44-48 6-9 Acrylic Varnishes Top Coat X 47-51 6-8 Polyester/PU Varnishes Top Coat X 45-49 4-8 28
Decorative Packaging Product Description Company Single coat or in combination with stamping enamel EB-5108-series Entire series available, as intermediate coat in a system with base and top coat Suitable for dry fabrication Cans for printing inks Very good flexibility, large color selection available For food packaging and GL Thermally cured Excellent coverage. Simultaneous cure with UV. Excellent printability, wide varnish compatibility, good water-balance. Excellent printability, wide varnish compatibility, good water-balance. Excellent machine compatibility, low misting and good thermal drying. High Flexibility, compatible with UV and Conventional Inks Compatible with UV and Conventional Inks UV curable Suitable for DRD, Deep Draw, Shallow Draw Cans, EOE Good chemical resistance High abrasion resistance High Abrasion Resistance 29
Global Presence ACTEGA Coatings & Sealants - Rigid Metal Packaging Centers of Competence ACTEGA North America Inc., USA S.A.S., France ACTEGA Artística S.A., Spain ACTEGA GmbH (HQ), Germany GmbH, Germany ACTEGA Foshan Co. Ltd. China (P.R.) ACTEGA Overlake, Brazil ACTEGA Premiata, Brazil 30
Your Contacts for Rigid Packaging GmbH Rhenaniastr. 29-37 41516 Grevenbroich Germany Phone: +49 2181 29 4-0 email: Peter.Zwankhuizen@altana.com Contact Person: Peter Zwankhuizen www.actega.com ACTEGA Artística Pol. Ind. A Granxa, rúa F 36475 Porriño (Pontevedra) Spain Phone: +34 986 23 16 06 email: Jose.Trigo@altana.com Contact Person: José Trigo www.actega.com S.A. 1, avenue Francois Sommer, Z.l. de Glaire, B.P. 30324 08202 Sedan Cedex France Phone: +33 476 23 66 72 email: Thierry.Tabeaud@altana.com Contact Person: Thierry Tabeaud www.actega.com ACTEGA Foshan Co., Ltd., China (P.R.) No. 22, Xing Ye Road, Bejiao Industrial Estate Shunde Region, Foshan City, Guangdong Pro. PRC-528311 China Phone: +86 757 26 65 53 72 email: Kevin.Wu@altana.com Contact Person: Kevin Wu www.actega.com ACTEGA North America 950 S. Chester Avenue Delran, NJ 08075 USA Phone: +1 401 25 61 035 email: William.Allen@altana.com Contact Person: Bill Allen www.actega.com e Vernizes Gráficos Ltda. Alameda Caiapós 383 Tamboré 06460-110 Barueri Sao Paulo Brasil Phone: +55 11 36 11 11-40 email: claudio.rodrigues@altana.com Contact Person: Claudio A. Rodrigues www.actega.com Disclaimer Copyright 2016 ACTEGA. All Rights Reserved. The texts, images, graphics, trademarks, brands and emblems are all subject to copyright and other intellectual property protection. Any use beyond law, in particular but not limited to duplication, translation and modification is illegal. The information and specification published on these sites are given to the best of ACTEGA knowledge. All this information shall not, however create any guarantee or representation with regard to characteristics and fitness for any particular purpose and shall not relieve the user from undertaking its own investigations and tests. Products, services, delivery terms and prices are subject to alteration without prior notice. Version 2.1, date 04/04/2016 31
www.actega.com Version 2.1, date 04/04/2016