HYDRO-TUFF HFA Hot Fluid Applied Rubberized Asphalt Waterproofing Membrane
HYDRO-TUFF (HFA) Hydro-Tuff HFA is a hot fluid applied rubberized asphalt membrane used in roofing and waterproofing applications. Hydro-Tuff is formulated to be a fluid material which forms a seamless and monolithic consistency that eliminates the need of mixing a plural component product. Common Substrates Include: Concrete Plywood Fully adhered cementitious cover board over tapered substrate fills such as rigid XPS/EPS insulations Can be installed over cellular concrete fills when using a fully adhered cement cover board and Hydro-Tuff is the correct waterproofing membrane for all of the following applications: Plaza Decks Planters Roof decks Foundation walls Vegetated roof applications Parking decks Split slab applications Roof decks in an inverted roof membrane assembly (IRMA) Standard installation thickness is 215 mils fully reinforced for above grade waterproofing and roofing applications. Hydro-Tuff HFA can also be installed as an unreinforced system. Hydro-Gard offers a complete system of waterproofing products which include thermal & moisture protection, drainage products, decorative pavers, wood decking, green roof components, and other accessories. Hydro-Tuff is conveniently packaged in 30lb patties for ease of use and is palletized with 75 boxes per pallet
HP-9800 Liquid Flashing Liquid flashing is used as a detail membrane for difficult shape conditions. This flexible methyl methacrylate resin provides superior adhesion to the Hydro-Tuff (HFA) wateproofing system. Neoprene Flashing Installation Used for flashings, penetrations, roof drains, deck to wall transitions, and other detail conditions where a heavy reinforcement sheet is needed. Hydro-Tuff HFA MEMBRANE APPLICATION Hot rubberized membrane is fully reinforced. Hydro-Tuff PB-25 is an SBS modified fiberglass base sheet embedded into the membrane while it s warm and sticky. It is the protection material for Hydro-Tuff when the direct over burden is insulation or Gard-Drain. Hydro-Tuff PB-40 is an SBS modified fiberglass base sheet embedded into the Hydro-Tuff HFA membrane and is to be used as the protection material when there is a medium overburden material and no Gard-Drain is used. Hydro-Tuff PB-50 is an SBS modified fiberglass base sheet embedded into the Hydro-Tuff HFA membrane to be used as protection material when there is a heavier overburden material being used, such as concrete. Hydro-Tuff CS-100 is an SBS modified fiberglass granulated cap sheet which is embedded into the Hydro-Tuff HFA membrane. Hydro-Tuff CS-100 is UV resistant and is used with the heaviest of overburden materials. THICKNESS: 94 mils WEIGHT: 58lbs/sq THICKNESS: 94 mils WEIGHT: 60lbs/sq THICKNESS: 120 mils WEIGHT: 88lbs/sq THICKNESS: 120 mils WEIGHT: 100lbs/sq
THE HYDRO-TUFF SYSTEM COMPONENTS FLASHING/REINFORCEMENT Neoprene Flashing Hydro-Gard s Uncured Neoprene Flashing is malleable making it highly adaptable to irregular shapes. Neoprene is used for reinforcing and in areas that may be exposed to ultra violet rays. It is an accessory product to be used with Hydro-Tuff Hot Fluid applied waterfproofing system. HG Polyester Fabric Hydro-Gard s Polyester Fabric is a 100% polyester, spunbond (PET) fabric. It is used to reinforce the Hydro-Tuff HFA Membrane as well as being used for detail work such as crack reinforcement and construction joints. Drainage Gard-Drain composite drainage products with multiple choices in Dimple Core flow rates and filter fabric choices for a multitude of applications.
TYPICAL WATERPROOFING APPLICATIONS Hydro-Tuff Plaza Deck Under Topping Concrete Topping Slab Gard-Drain Drainage Board Hydro-Tuff PB Series Hrydro-Tuff HFA Hydro-Primer Hydro-Tuff IRMA Roof Stone Ballast Hydro-Tuff IRMA Filter Fabric 40psi XPS Insulation Hydro-Tuff PB Series Hydro-Tuff HFA Hydro-Primer Hydro-Tuff Plaza Deck Pavers Pavers Tabs Adjustable Pedestal 60psi XPS Insulation Hydro-Tuff PB Series Hydro-Tuff HFA Hydro-Primer
THE HYDRO-GARD DIFFERENCE PROJECT FULFILLMENT & SYSTEM INTEGRITY Hydro-Gard offers design/architectural support, project-specific AutoCAD detailing, as well as material installation exclusively by our experienced approved applicators. We offer the above design phase services prior to assuming a project as a testament to the quality and integrity of our products. ADVANTAGES OF HYDRO-TUFF HFA Hydro-Tuff s 100% solid material containing no solvents offers a single component solution which provides immediate cure on cooling Hydro-Tuff HFA is VOC Compliant LEED Credits Hydro-Tuff is formulated with post consumer recycled content in the form of reprocessed used tire rubber grade Hydro-Tuff can be installed in dead level applications. The membrane performs in submersed water conditions & remains warrantable. Hydro-Tuff is shipped in 30lb patties adding to the system s ease of use in application which saves labor days & in turn, saves you money. Hydro-Tuff provides a monolithic system, free of seams, which fully adheres to the substrate. Hydro-Tuff membrane, when used in an inverted roofing membrane application (IRMA), has a longer performance life than conventional roofing applications because it is protected from thermocycling & mechanical damage.
HYDRO-PRIMER HYDRO-TUFF MEMBRANE NEOPRENE FLASHING INSTALLATION HP 9800 LIQUID FLASHING Primer is applied to prepared surface Hot rubberized asphalt is melted in a double jacketed melter Used for flashings, reinforcing, & areas that may be exposed to ultra violet rays Used as a detail membrane for difficult shape conditions HYDRO-TUFF HFA MEMBRANE APPLICATION HG POLYESTER FABRIC HYDRO-TUFF PB SERIES PROTECTION LAYER AMENITY DECKS Hot rubberized membrane is applied by squeegee Polyester fabric is installed between the membrane applications to provide a 2 layer, fully reinforced system Protection layer is provided to shield membrane from over burden or paving Hydro-Gard offers an array of pedestal set paving. From pre-cast concrete paving to South American hard wood tiles.
HYDRO-GARD is a manufacturer of high performance roofing and waterproofing products for commercial, residential, and industrial construction projects. We provide a single-source solution for the most demanding of projects; whether the applications are above or below grade, vertical or horizontal in nature. Our products are utilized in plaza decks, green roofs, tunnels, foundations, tank liners, or other building situations requiring the ultimate solution for moisture protection. HYDRO-GARD offers diverse product technologies developed from the knowledge and experience gained from decades of system installations. In the expansion and development of our product line and systems, Hydro-Gard will always be on the cutting edge of the latest technological advancement in the construction industry. Thus ensuring our customer base that we are providing the industry standard in waterproofing systems. HYDRO-GARD systems provide innovation and reliability and are well suited to adapt to theever changing issues that face the construction industry. We provide products and services to architects, engineers, consultants, contractors, and building owners worldwide. The technologies we utilize can successfully accommodate the variety of climates and seasons your structures are exposed to for generations to come. 18340 Yorba Linda Blvd., Suite 107, Box 304 Yorba Linda, CA 92886 Phone: (562) 944-7030 Fax: (562) 944-6402 WWW.HYDRO-GARD.COM