STICK WELDING and TIG WELDING DC STICK WELDING INVERTER 3 058935 058936 058937-058939 Inverter technology for easy welding High quality welding with low power consumption Compact, light weight for easy handling Excellent arc starting, increases the current at the beginning of the welding Increases the current in order to avoid the sticking when electrode enters in melted metal draw your electrode easily without damaging it, in case of sticking metal 058935 058936 058937 058938 058939 160A 220V 1PH 200A 220V 1PH 300A 380V 3PH 400A 380V 3PH 500A 380V 3PH Rated Input Voltage (V/Ph/Hz) 160~240/1/50 380/3/50 Rated Input Power (kva) 7.2 9.2 11.2 17.1 23.7 Welding Current Adjustment (A) -160A -200A 20-300 20-400 20-500 No-load Voltage (V) 85 85 60 70 65 Rated Output Voltage (V) 26.4 28 32 36 40 Duty Cycle (%) 60 60 60 60 60 Efficiency (%) 80% Power actor 0.7 0.85 IP21S IP21S Recommendation Ø Electrode for Continuous Usage (mm) 2 2.6 3.2 4 5 Dimension (mm) 300 x 150 x 235 430 x 220 x 320 530 x 295 x 475 Weight (kg) 4.8 5.2 15 21 25 AC STICK WELDING Use high-quality silicon steel Steples output current adjustment Steady welding current No magnet defection blow arc Tractor design and easy to move KW1400034 KW1400035 KW1400036 KW1400037 AC Stick Welding 250A AC Stick Welding 315A AC Stick Welding 400A AC Stick Welding 500A Rated Input Voltage (V/Ph/Hz) 220-380/1-2/50 380/2/50 Rated Input Power (kva) 18.5 26 33.5 42 Input Current (A) 26 36 46 56 Welding Current Adjustment (A) 50-250 50~315 80~400 0~500 Duty Cycle (%) 35 Efficiency (%) 85 Power actor 0.8 IP21S Cooling Method an Cooling Ø Electrode (mm) 1.6~4.0 1.6~5.0 Dimension (mm) 515 x 400 x 570 565 x 400 x 600 595 x 400 x 620 595 x 400 x 660 Weight (Kg) 67 77 85 6 TIG WELDING Portable and easy to operate Multifunction MMA and TIG Welding Pulse function and down slop 0-5 S adjustable for 200A Digital meter to preset and display welding current Wide range for input power voltage 220V ± 15% KW1400722 DC TIG Welding 200A Pulse Rated Input Power (kva) 6.1 Welding Current Adjustment (A) 5-200 No-Load Voltage (V) 56 Rated Output Voltage (V) 18 Duty Cycle (%) 60 Efficiency (%) 80 Power actor 0.73 IP21 Arc Ignition Mode H Pulse unction Pulse Dimension (mm) 430 x 180 x 300 Weight (Kg) 8.4 375
TIG WELDING and MIG - MAG WELDING AC/DC TIG WELDING High quality and easy to operate Multi function : - MMA - DC TIG Welding for carbon steel, stainless steel, copper and other nonferrous - AC TIG Welding for aluminium 2T/4T and Repeat unction Selectable Untouch start DC TIG Automatic Hot Start Pulse Width, Pulse requency, AC Balance, Up Slope and Down Slope unction Adjustable 121575 121576 AC/DC TIG Welding 250A AC/DC TIG Welding 315A 121575 121576 Rated Input Voltage (V/P/Hz) 220/1/50-60 380/3/50-60 Rated Input Power (kva) 8.5 8.9 Input Current (A) 38.9 13.5 Welding Current Adjustment (A) - 250-315 Duty Cycle @ 25 C (%) 60 60 Efficiency (%) 80 85 Power actor 0.73 0.93 IP21 Arc Ignition Mode H Dimension (mm) 498x328x365 616x326x620 Weight (kg) 20 39 MIG-MAG WELDING Easy to Operate, Economical, and Practical 500A can use CAW IGBT Inverter technology to give : - Stable arc, deep penetration, minimal spatter - Stable voltage output ±15% of any voltage fluctuation High duty cycle allows welding over longer duration 075020 075051 075052 075020 075051 075052 MIG-MAG Welding 250A 220V1PH C/W Troley MIG-MAG Welding 350A 380V3PH C/W Troley MIG-MAG Welding 500A C/W EX Wire eeder 380/3/50 Rated Input Current (MMA) (A) 47 19 38 Rated Input Current (MIG-MAG) (A) 50 18 37.5 Output Current Adjustment (MMA)(A) 50-220 70-300 50-500 Output Current Adjustment (MIG-MAG) (A) 50-250 50-350 80-500 Output Voltage (MMA)(V) 22-28.8 22.8-32 22-40 Output Voltage (MIG-MAG) (V) 16.5-26.5 16.5-31.5 18-39 No Load Voltage (V) 56 75 Type of Wire eeder Internal Internal Separated Wire eeding Speed Range (m/min) 2-13 3-16 2-16 Post low Time (S) 1.0±0.5 1.5±0.5 Welding Wire Diameter (mm) 0.8/1.0 0.8/1.0/1.2 1.0/1.2/1.6 Duty Cycle Max (%) 35 Efficiency (%) 80 85 Power actor 0.73 0.93 IP21 Dimension (mm) 900 x 458 x 760 950 x 458 x 950 961 x 5 x 905 Weight (Kg) 45 60 78 376
DENT PULL WELDING DENT PULL WELDING ALUMINIUM Standard Accesories: Microprocessor control system optimizes the welding parameters. High precision power control system. Complete with two and four-kickstand crossbar lifters to accomodate any repair task for the whole alumunium car body. Suitable for dent pulling of aluminium and different kinds of car steels. High welding strength without damage to the metallic coatings and paint surfaces on the back. Digital display, simple to operate and easy to use. Able to weld 3mm-6mm aluminium stud bolts, steel stud bolts and aluminium washers. 066874 Dent Pull Welding IGBT-INV ALU 3KVA Rated Input Voltage (V/P/Hz) 220/1/50-60 Rated Input Power (kva) 3 use (A) 4 H Inverter IGBT No Load Voltage (V) 50-150 Spottable Diameter (mm) 3-6 Duty Cycle (%) 80 Welding Mode Dent Pulling Dimension (mm) 530 x 600 x 164 Weight (Kg) 60 Crossbar lifter 4 stands Pneumatic vacuum cupule Puller Pulling spot hammer Dent repair glue pulling kit Crossbar lifter 2 stands Steel welding gun set Aluminium welding gun set Manually cupule Screw tool box DENT PULL WELDING STEEL Standard Accesories: IGBT inverter technology Digital control system offers greater stability of the output power. Automatic mains voltage monitoring. Overheat protection. Stepless current regulation. Designed to repair different kinds of car steels such as conventional steel, stainless steel, etc. Various welding procedures are available such as shrinking, washer welding, dent pulling spot welding, flattening, waveform wire welding, stud welding, OT washer welding, triangle washer welding etc. High precision time and power adjustment system. Inverter technology with high efficiency, energy consumption can be reduced up to 50% 066875 Dent Pull Welding IGBT-INV STEEL 6.4KVA Rated Input Voltage (V/P/Hz) 380 / 3 / 50-60 Rated Input Power (kva) 6.4 Input Current (A) 54/18 Max Welding Current (A) 2600 Output Voltage (V) 1-13 One Side Welding Thickness (mm) 0.8+1.2 Operation Way Electronic Timer Continuosly Welding Time (S) 0-99 Dimension (mm) 550 x 650 x 11 Weight (Kg) 42 Steel welding gun set Pneumatic vacuum cupule Puller Pulling spot hammer Quick puller Screw tool box 377
INVERTER PLASMA CUTTING and GAS CUTTING MACHINE INVERTER PLASMA CUTTING 075053 116662 Automatic post flow High duty cycle Compact dimension Auto protection Energy saving 075053 116662 Inverter Plasma Cutting 40A mm Inverter Air Plasma Cutting 60A 380V 3PH 380/3/50 Rated Input Power (kva) 6.6 8.1 Input Current (A) 40 60 Welding Current Adjustment (A) 15~40 20~60 No-Load Voltage (V) 230 293 Duty Cycle Max (25ºC) (%) 60 Efficiency (%) 80 85 Power actor 0.73 0.93 IP21 Arc Starting H Touch H Untouch Compressed Air (kfg/cm²) 4~5 3~5 Cutting Thickness or Carbon Steel (mm) < < 20 Cutting Thickness or Stainless Steel (mm) < 8 < 15 Cutting Thickness or Aluminium (mm) < 5 < Dimension (mm) 460 x 170 x 330 485 x 234 x 425 Weight (Kg) 8.5 24.5 GAS CUTTING MACHINE HANDY KIT Main body made of aluminium alloy Small main body, compact structure and durable for use Driving by servo DC motor, running and cutting steadily Able to cut different slop, curve and circle motor 50-800mm/min GAS CUTTING MACHINE BEETLE TYPE Standard Accesories: Spare Rail KW1400162 Gas Cutting Machine Handy Kit Cutting Speed (mm/min) 50-80 Dimension (mm) 500 x 200 x 150 Weight (Kg) 4 Light and compact design Advanced motor with fan for cooling Groove range I.Y.V (45 ) KW1400153 Gas Cutting Machine Beetle Type Cutting Thickness (mm) 6-0 Cutting Speed (mm/min) 150-800 Ø Circle Cutting (mm) 290-540 Dimension (mm) 350 x 140 x 170 Weight (Kg) GAS CUTTING MACHINE MAX TYPE Single Torch Double Torch Standard Accesories: Spare Rail Light and compact design Advanced motor with fan for cooling Groove range I.Y.V (45 ) KW1400154 KW1400155 KW1400154 KW1400155 Gas Cutting Machine Beetle Type Gas Cutting Machine Max Type 2 Torch Cutting Thickness (mm) 6-0 Cutting Speed (mm/min) 150-800 Ø Circle Cutting (mm) 390-640 - 1260 Dimension (mm) 600 x 170 x 220 Weight (Kg) 15 21 378
GAS CUTTING MACHINE H-BEAM GAS CUTTING MACHINE Speed system is adjusted by integrated circuit Can be use for bevel and groove cutting Rail KW1400156 H-Beam Gas Cutting Machine Cutting Thickness (mm) 6-60 Cutting Width (mm) 150-800 Cutting Height (mm) 150-400 Cutting Speed (mm/min) 50-750 Dimension (mm) 250 x 170 x 260 Weight (Kg) 30 CIRCULAR GAS CUTTING MACHINE Speed system is adjusted by integrated circuit Can be use for bevel and groove cutting Especially for cutting of circular part, round hole and flange KW1400158 Cutting Thickness (mm) 6-0 Ø Circle Cutting (mm) 30-600 Cutting Speed (mm/min) 0.2-60 Circular Gas Cutting Machine Dimension (mm) 750 x 300 x 700 Weight (Kg) 28 PROILING GAS CUTTING MACHINE Speed system is adjusted by integrated circuit Various kinds of spare part to cut pattern High precision in cutting with well smooth surface KW1400159 Circular Gas Cutting Machine Cutting Thickness (mm) 6-0 Ø Circle Cutting (mm) 20-600 Cutting Speed (mm/min) 50-750 Length of Line Cutting (mm) 1200 Max Size of Cutting Square (mm) 500 x 500 Max Size of Cutting Rectangle (mm) 400 x 900 / 450 x 750 Dimension (mm) 750 x 300 x 700 Weight (Kg) 56 PIPE CUTTING MACHINE Chain belt to tie the pipe Adjustable chain belt as per diameter of pipe Bevel angle I.Y.V (45 ) KW1400160 KW1400494 KW1400160 KW1400494 Pipe Cutting Machine Pipe Cutting Machine Automatic Cutting Thickness (mm) 6-50 6-30 Cutting Speed (mm/min) Manual 50-1150 Ø Pipe Cutting (mm) 150-600 Dimension (mm) 420 x 280 x 450 260 x 420 x 450 Weight (Kg) 13 16 379
GAS CUTTING MACHINE and WELDING ACCESSORIES SEMI AUTOMATIC GAS CUTTING MACHINE Compact structure, easy to maneuver Single hand operation Different cutting shape are available such as side corner and curve or straight cutting and bevel cutting of I, V (45 ) KW1400493 Cutting Thickness (mm) 6-30 Ø Circle Cutting (mm) 50-550 Cutting Speed (mm/min) 50-0 Dimension (mm) 460 x 360 x 240 Weight (Kg).5 Semi Automatic Gas Cutting Machine REGULATOR Heater Oxygen Regulator KW1400821 Acetylene Regulator KW1400822 LPG Regulator KW1400823 Argon Regulator KW1400175 CO 2 Regulator KW1400176 CO2 Regulator 006072 KW1400821 KW1400822 KW1400823 Oxygen Regulator Acetylene Regulator LPG Regulator Gas Service (kgf / cm 2 ) Oxygen Acetylene Propane Inlet Pressure Gauge (kgf / cm 2 ) 200 / 3000 28 / 400 25 / 350 Outlet Pressure Gauge (Nm 3 /hr) 14 / 200 2 / 30 2 / 30 Maximum low Rate 40 5 1 Inlet Connection JIS, BS, CGA, DIN Outlet Connection G3/8 (R) Hose Nipple G3/8 (L) Hose Nipple Dimension (mm) 170 x 0 x 170 G3/8 (L) Hose Nipple KW1400175 KW1400176 006072 Argon Regulator low meter CO2 Regulator low meter CO2 Regulator with low meter Heater220V Gas Service Argon, mix gas CO₂ CO₂ Outlet low Gauge (l/min) 0~25 LPM Argon 0~25 LPM CO₂ Inlet Gauge (Mpa) 25 Inlet Connection G5/8 -RH(M) G5/8 -RH() Outlet Connection (mm x RH (M)) M12 x 1 Dimension (mm) 2 x 190 x 1 2 x 170 x 1 2 x 190 x 190 Argon Gas Saving Regulator 006040 006040 006071 Argon Gas Saving Regulator CO2 Gas Saving Regulator 006071 Gas Service Argon, AR/CO₂ Mix CO₂ Outlet Pressure Preset (PSI) 50 50 CO2 Gas Saving Regulator Inlet Gauge (PSI) 2, 4000 2, 4000 lowmeter (SCH) 60 60 Inlet Connection CGA580 CGA320 Outlet Connection 5/8-18RH () 5/8-18RH () Supply Voltage (Volt/Watt) - 220 VAC / 190 W Dimension (mm) 2 x 190 x 1 2 x 190 x 190 lowmeter set value at welding start (L/min) Argon Welding 5 CO2 Welding 15 20 Rubber Hose Economization Econo-low Consumption Length (m) Percentage (%) 3 out 19 880 53.9 out 2390 896 62.5 3 out 2190 1590 27.4 out 2546 1671 34.4 out 3283 2350 28.4 20 out 3750 2563 31.6 30 out 4190 2706 35.4 out 4050 3145 22.3 20 out 4440 3305 25.5 30 out 4841 3429 29.2 380
WELDING ACCESSORIES LASHBACK ARRESTOR lashback Arrestor Torch lashback Arrestor Oxygen lashback Arrestor uel Gas KW14008 KW1400811 KW1400812 KW1400813 for Torch Oxygen Jis M16 for Torch uel Gas Jis M16lh for Regulator Oxygen Jis M16 for Regulator uel Gas Jis M16lh Gas Service Oxygen uel Gas Oxygen uel Gas Working Pressure (MPA) 0.15 1 0.15 Capacity low (M3/H) 12 2 40 9 Inlet Connection (M) M16-1.5RH M16-1.5LH M16-1.5RH M16-1.5LH Outlet Connection () M16-1.5RH M16-1.5LH M16-1.5RH M16-1.5LH Dimension (mm) 61 x 25 x 25 83 x 25 x 25 Weight (g) 92 138 006074 006075 006076 006077 for Torch uel Gas LH 3/8 for Torch Oxygen RH 3/8 for Regulator uel Gas LH 3/8 for Regulator Oxygen RH 3/8 Gas Service Acetylene uel Oxygen Acetylene uel Oxygen Working Pressure (PSIG) 145 21.5 145 21.5 Capacity low (LPM) 67 250 67 250 Inlet Connection (M) G3/8 -LH G3/8''-RH G3/8''-LH G3/8''-RH Outlet Connection () G3/8 -LH G3/8''-RH G3/8''-LH G3/8''-RH Dimension (mm) 61 x 25 x 25 83 x 25 x 25 Weight (g) 95 95 138 138 WELDING DRYER ROD KW14062 KW14063 KW14062 KW14063 Welding Dryer Rod 5kg 220V Welding Dryer Rod kg 220V Input Power (W) 180 Rod Length (mm) 450 Rod Weight (Kg) 5 Dimension (mm) 190 x 190 x 660 230 x 230 x 630 Weight (Kg) 3 6 AUTOMATIC INRARED ELECTRODE OVEN KW14064 KW14065 eatures: Infrared radiation for heating Low heat loss, high heat efficiency Phase, variable, overheat, overpressure, alarm indicator Touch keypad, easy to operate Suitable for various welding products heating Suitable for electrical machinery, casting, chemical field, etc KW14064 KW14065 Automatic Infrared Electrode Oven 60 Kg Automatic Infrared Electrode Oven 0 Kg Input Voltage (V/ph/Hz) 220/1/50 380/3/50 Rated Power (kva) 3.8 7.3 Max. Temperature ( C) 500 Capacity (Kg) 60 0 Homogenized Temperature ( C) 15 Electrode Length (mm) 450 Dimension (LxWxH) (mm) 570 x 720 x 1340 50 x 720 x 1250 Weight (Kg) 140 225 ELECTRODE HOLDER. Working (A) KW1400012 Electrode Holder 300A 300 KW1400013 Electrode Holder 600A 600 KW1400771 Electrode Holder 800A 800 381
WELDING ACCESSORIES GROUND CLAMP. Working (A) KW1400014 Ground Clamp 300A 300 KW1400015 Ground Clamp 500A 500 WELDING CABLE Ø 50mm Ø 70mm eatures: Construction : inner pipe + conductor- + the control wire + sheath Conductor : adoption the high pure have not oxidized copper line Elastic rubber sheath for stick welding 0% all copper wire. KW14020 KW14012 KW14013 KW14014 KW14021 KW14016 KW14017 KW14018 Welding Cable Ø50mm, m Welding Cable Ø50mm, 30m Welding Cable Ø50mm, 50m Welding Cable Ø50mm, 0m Welding Cable Ø70mm, m Welding Cable Ø70mm, 30m Welding Cable Ø70mm, 50m Welding Cable Ø70mm, 0m MIG-MAG WIRE eatures for Solid Wire: Precision layered Manufactured to AWS ER 70S-6 All position Solid Wire lux Cored Wire eatures for lux Cored Wire: Low carbon steel and 50kg/mm 2 class high tensile steel Manufactured to AWS E71T-1 Applicable for ships, bridges, buildings, storage tanks and steel beams. Size (mm) KW1400191 Solid Wire AWS ER 70S-6 0.8 15 KW1400265 Solid Wire AWS ER 70S-6 1.0 15 KW1400675 KW1400676 lux Cored Welding Wire AWS E71T-1 lux Cored Welding Wire AWS E71T-1 1.0 15 1.2 15 Weight (kg) RAIL KW1400187 KW1400075 KW1400075 compatible for KW1400153,154,155 KW1400187 compatible for KW1400157,493. KW1400075 KW1400187 Spare Rail 17cm x 1.8m for Gas Cutting Machine Spare Rail cm x 1.8m for Gas Cutting Machine TUNGSTEN ELECTRODE. KW1400283 KW1400284 KW1400285 KW1400706 KW1400707 Tungsten Electrode 1.6 x 175mm for e, Ss Tungsten Electrode 2.0 x 175mm for e, Ss Tungsten Electrode 2.4 x 175mm for e, Ss Tungsten Electrode 2.0 x 175mm for Al Tungsten Electrode 2.4 x 175mm for Al 382