Cross-Colors Mingles Porcelain Stone
Cross-Colors Mingles Porcelain Stone A remarkably classic tile. Quintessential in its color palette, texture, finishes and complementary mingles, Crossville Cross- Colors Mingles is the tried and true tile for designers. Striking in its simplicity, comforting in its consistency, Cross-Colors Mingles provide the perfect complement to any space. A850 Graphite 12 x 12 UPS 2
A790 Burgundy Smoke 12 x 12 PO 3
Color Palette Available Colors A233 Sand Bisque A675 Stonehenge R001 Grey Mingle A750 Brown Tweed A825 Mercury A900 Mica A790 Burgundy Smoke A850 Graphite A880 Onyx 4
A750 Brown Tweed 12 x 12 UPS 5
Specifications Sizes 12 x 12 8 x 8 6 x 6 3 x 3 Mosaic Sizes & Finishes Field Tile Nominal (in) Actual (in) Thickness (in) Finish 6 x 6* 5-3/4 x 5-3/4 5/16 UPS/PO/CS 8 x 8 7-3/4 x 7-3/4 5/16 UPS/CS/CGS/CTS/CD 12 x 12 11-3/4 x 11-3/4 5/16 UPS/PO/CS Crossville recommends a grout joint of 3/16 to 1/4 inch. *Note: The cut/bevel tile is cut from larger format tile and the edges are beveled to provide a factory appearance. 6 x 6 CS and PO, and 8 x 8 CGS and CD are not stocked and require an extra two to eight weeks for delivery depending on Crossville s production schedule. Actual measurements stated in inches indicate tile is calibrated (non-rectified). Actual measurements stated in mm indicate tile is rectified. Mosaics Nominal (in) Actual (in) Thickness (in) Finish 3 x 3 Mosaic** 11-7/8 x 11-7/8 1/4 UPS/CTS **Sheet mounted on 11-7/8 x 11-7/8 with a 1/8 inch grout joint. 3 x 3 Mosaics are not stocked and require an extra two to eight weeks for delivery depending on Crossville s production schedule. CTS finish is suitable for wet and greasy floor areas, as well as exterior walking surfaces. Product Performance Breaking Strength 350-420 lbf ASTM C648 Bond Strength >200 psi ASTM C482 Chemical Resistance Unaffected ASTM C650 Frost Resistance Resistant ASTM C1026 Water Absorption <0.10% ASTM C373 Scratch Hardness Mohs Scale UPS, CS, CTS, CD, CGS 6 PO 5 Wet Dynamic Coefficient of Friction Range Unpolished (UPS) 0.50-0.60 AcuTest sm Cross-Slate (CS) 0.50-0.60 AcuTest sm Cross-Tread (CTS) * 0.50-0.60 AcuTest sm Crossdot (CD) * 0.50-0.60 AcuTest sm Cross-Grip (CGS) ** NA AcuTest sm Polished (PO) 0.31-0.41 AcuTest sm * The increased real world traction of these types of surfaces cannot be fully realized by any current COF testing methodologies due to their exaggerated facial structure. ** Due to the heavily texture surface DCOF value is not able to be measured by testing device. Get Planked! Our Porcelain Stone products are available in popular plank shapes with no minimum order and quick fulfillment. See website for more details and sizes. Shade & Texture Index Cross-Colors has a shade variation of V1. V1 V2 V3 V4 Differences among pieces from the same production run are minimal. V1 Uniform appearance V2 Slight Variation V3 Moderate Variation V4 Substantial Variation Coordinating Trim Cove Base Inside Cove Base Cove Base Bullnose Left & Right Bullnose Mounted Bullnose Bullnose Mounted Cove Base (Standard, round top) Cove Base Corner Corner - Left Corner - Right Bullnose Corners Stair Tread 1 Linear Foot Corner 1 Linear Foot Trim Program (Available in UPS finish only) Size 6 x 8 1 x 6 6 x 8 Inside & Outside 4 x 8 4 x 8 Left & Right 4 x 8 3 x 3*** 3 x 3*** 3 x 3*** Cove Base Cove Base Corner Cove Base Corner Bullnose Bullnose corners Bullnose Stair Tread Mounted Bullnose Bullnose Corner Mounted Cove Base Actual 5-7/8 x 7-3/4 1 x 5-7/8 5-7/8 x 7-3/4 3-7/8 x 7-3/4 3-7/8 x 7-3/4 3-7/8 x 7-3/4 2-7/8 x 11-7/8 2-7/8 x 2-7/8 3-5/8 x 11-7/8 Thickness 5/16 5/16 5/16 5/16 5/16 1/4 1/4 1/4 6 ***3 x 3 trim pieces are not stocked and require an extra two to eight weeks for delivery depending on Crossville s production schedule. 3 x 3 Mounted Bullnose and Mounted Cove Base are face mounted with Clearview film 2-7/8 x 11--7/8 strip.
Recommended Use Cross-Colors Cross-Colors Unpolished (UPS) is recommended for interior floors, walls, countertops, and exterior walls in both residential and commercial environments. Cross-Colors (PO) is recommended for interior floors (except where standing water may occur), walls, countertops and exterior walls in both residential and commercial environments. Cross-Slate (CS) The Cross-Slate finish combines the rustic and textured feel of slate with the through-body color and durability of Porcelain Stone. Throughbody color, unglazed structured surface, and a variety of sizes provide a strong commercial value where enhanced traction is needed for high traffic interior and exterior spaces. Cross-Slate is recommended for interior floors and walls as well as exterior walls and exterior walking surfaces in both residential and commercial environments. Cross-Tread (CTS) Increased slip resistance and ease of maintenance make this tile a suitable choice for wet and greasy floor areas, as well as for exterior walking surfaces. The Cross-Tread surface pattern is eye-catching, making it a great option for transitional areas and for use as an accent tile. Crossdot (CD) The raised-dot pattern, with a roughened surface atop each dot, provides increased coefficient of friction. It is suitable for most commercial kitchens, food prep areas, service stations and other backof-the-house areas, as well as for exterior walking surfaces. Cross-Grip (CGS) Developed in conjunction with restaurant owners, Cross-Grip is a possible solution for those areas where slips and falls are of greatest concern. The patented raised-point texture has earned Cross-Grip the highest possible performance rating in the National Restaurant Association s testing for slip resistance. It is suitable for areas where grease, food, oil and other residue tend to accumulate. Information listed here is subject to change. Please refer to CrossvilleInc.com for the latest, most accurate information. Care and Maintenance Regular cleaning is the best way to keep Cross-Colors tile looking good for years to come. Use clean, hot water (combined with a household cleaner for more aggressive cleaning). Rinse thoroughly and dry with a soft cloth. No waxes are needed. More information regarding the care and maintenance of Crossville products is available at CrossvilleInc.com. Our Warranty Crossville Inc. guarantees that its products will meet or exceed the performance specifications outlined in ANSI A137.1-2012. For complete details check our website at CrossvilleInc.com. Environmentally Conscious Cross-Colors contains a minimum of 4% pre-consumer recycled content and is manufactured by Crossville using proprietary processes. Crossville recycles nearly 12 million pounds of previously discarded filtrate and fired tile waste. In addition to its own fired waste recycling, Crossville also accepts and recycles reclaimed, previously installed tile through its Tile Take-Back program. For more information, visit CrossvilleInc.com/green. Wet area use for 3 x 3 Mosaics Crossville produces these products with the Cross-Sheen finish. They deliver a wet dynamic coefficient of friction equal to or greater than 0.50 on the surface of the tile. Their small 3 x 3 size ensures frequent grout joints which provides traction and drainage. Crossville cannot control situations involving incorrect installation, improper slope to the drain for elimination of standing water, and poor surface cleaning. This information is provided so that customers may make a realistic and informed decision when comparing Crossville Mosaics to other tile products in wet area environments, such as residential commercial bathrooms, showers, and interior pool decks. The defining threshold value 0.42 is for level interior spaces expected to be walked upon when wet, a wet DCOF of less than 0.42 shall only be installed when the surface will be kept dry when walked upon and proper safety procedures will be applied when cleaning the tiles. Crossville Sample Express Sample fulfillment & Help Line Samples@CrossvilleInc.com 1 800 221.9093 Loose Samples for Architects & Designers Loose Tile Samples Sizes may vary depending on product series Max. of 4 large field tile per order Replacement Chips for PSS Rack Max. of 5, 2 x 2 chips per color Standard Shipping UPS Ground Our CrossvilleInc.com Warranty If you want a better idea of what Crossville tile would look like in a particular room setting, simply visit our website and click on Cross-Vision. This powerful software tool allows you to visualize different types of Crossville tile. In addition, you ll find comprehensive information about Crossville s entire portfolio of products. You can also learn about the latest styles and trends from industry experts, download detailed care and maintenance instructions for our various products, or browse electronic versions of Crossville s product brochures. So whether you need information about Crossville products or tile in general, please visit us at CrossvilleInc.com. Hydrotect Our porcelain tiles are available with Hydrotect. Crossville s revolutionary invisible coating harnesses the power of light, water, and oxygen to create the best defense against dirt and pollution. Whether indoors or out, floors and walls stay cleaner, providing a superior experience in any space. For complete details check our website at CrossvilleInc.com. Trade Organizations Environmentally Aware Available 7
Cross-Colors Mingles Crossville, Inc. PO Box 1168 Crossville, TN 38557 Phone 931.484.2110 Fax 931.456.2956 E-Mail Crossc@CrossvilleInc.com Web CrossvilleInc.com LIT-CCMING-17 A850 Graphite 12 x 12 UPS Cover: A750 Brown Tweed 12 x 12 UPS and 6 x 8 Cove Base UPS