shown with available accessories from Home Depot V1.00 - Installation Instructions effective May 1, 20 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 20. Please visit www.ozcobp.com to get current information
26 1 4 " Overview 45" 48" 24" V1.00 - Installation Instructions effective May 1, 20 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 20. Please visit www.ozcobp.com to get current information
5 3 1 14 13 8 9 12 2 10 4 ITEM NO. QTY. PART NUMBER DESCRIPTION 1 1 56658 Assembly, -1/4" x -1/4" Scroll Accent 2 1 56618 Assembly, 4" Standard Rafter Clips 3 1 56641 Assembly, 2x4 Top Rail Saddle 4 1 56622 Assembly, 1-1/4" Hammered Dome Cap Nut 5 2 4x4 Post 4x4x72" 6 1 56626 OWT Timber Screws, 2-3/4" (70mm) 7 2 4x4 Post 4x4x43" 8 5 2x4 Board 2x4x48" 9 1x6 Board 1x6x48" 10 10 1x6 Board 1x6x24" 11 2 2x2 Board 2x2x17" 12 1 2x2 Board 2x2x24" 13 1 2x6 Board 2x6x48" 14 4 2x6 Board 2x6x24" 7 Bill of Material V1.00 - Installation Instructions effective May 1, 20 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 20. Please visit www.ozcobp.com to get current information
56622 (10 pack) 56626 (25 pack) 4 screws required for each connector 56658 56618 (10 pack) 56641 (2 pack) OZCO V1.00 - Installation Instructions effective May 1, 20 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 20. Please visit www.ozcobp.com to get current information
Suggested Tools (others may be required) V1.00 - Installation Instructions effective May 1, 20 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 20. Please visit www.ozcobp.com to get current information
38 1 2 " 21" 24" 6 1 2 " 6" 9" Tool Required 3/8" Driver step 1 (Hex Cap Nut) provided (OWT Screw) provided V1.00 - Installation Instructions effective May 1, 20 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 20. Please visit www.ozcobp.com to get current information
step 1 left side support step 2-repeat step 1 for opposite side V1.00 - Installation Instructions effective May 1, 20 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 20. Please visit www.ozcobp.com to get current information
(Hex Cap Nut) provided Tool Required 3/8" Driver (OWT Screw) provided step 3 V1.00 - Installation Instructions effective May 1, 20 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 20. Please visit www.ozcobp.com to get current information
secure with nails or screws step 4 V1.00 - Installation Instructions effective May 1, 20 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 20. Please visit www.ozcobp.com to get current information
C L 2" typ secure with nails or screws step 5 V1.00 - Installation Instructions effective May 1, 20 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 20. Please visit www.ozcobp.com to get current information
secure with nails or screws step 6 V1.00 - Installation Instructions effective May 1, 20 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 20. Please visit www.ozcobp.com to get current information
random location for decoration-4 places (this is to use up parts and optional) step 7 V1.00 - Installation Instructions effective May 1, 20 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 20. Please visit www.ozcobp.com to get current information
cutout in desired location & orientation 13" 13" step 8 V1.00 - Installation Instructions effective May 1, 20 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 20. Please visit www.ozcobp.com to get current information
sink cutout Note: add additional bracing to opposite side before cutting step 9 V1.00 - Installation Instructions effective May 1, 20 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 20. Please visit www.ozcobp.com to get current information
drop-in plastic sink (sold separately) step 10 V1.00 - Installation Instructions effective May 1, 20 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 20. Please visit www.ozcobp.com to get current information