SISTEMAS VS TECHNICAL CATALOG

SISTEMAS VS TECHNICAL CATALOG LAMMAS s.r.l. Strada Castellamonte-Bairo 1/A 10010 Bairo (TO) Italy. Tel: +390124501266 Fax: +390124501047 Email: ufcomm@lammas.it Website: www.lammas.it

GENERAL CLAUSES While every effort has been made to ensure the accuracy and completeness of the information contained in this document, the possibility of errors or omissions in data or technical specifications cannot be entirely excluded. The specifications or data in this document are therefore subject to change without prior notice, in which case the manual will be updated. If you have any questions or notice any inaccuracies, please contact our office: Strada Provinciale Castellamonte 1/A 10100 Bairo Canavese (TO) Italy Telephone +39.0124.501266 / 501047 Fax +39.0124.501326 E-mail: ufcomm@lammas.it Website: www.lammas.it This manual contains information of a strictly technical nature that is the property of Lammas S.r.l.. No part of this document may be reproduced, disclosed or modified without the owner's written authorisation. All rights reserved by Lammas S.r.l. Release 1 - Review 07-2018 2

STANDARD groups technical catalog: SISTEMAS VS FOR CAD FILES ASK TO www.lammas.it DESCRIPTION CHAPTER PAGE LINE MODULES 1 6 11 PALLET 2 12 15 SHOCK ABSORBERS 3 16 CHAIN TIGHTENER HEADS 4 17 20 MOTORIZED HEADS 5 21 28 GEARMOTORS 6 29 SPACERS 7 30 34 TRANSFER UNITS APPLICATIONS 8 35 TRANSFER UNITS APPLICATIONS 9 36 39 MANUAL WORKING STATIONS 10 40 INDEX PALLET UNITS 11 41 42 ROTARY TABLES UNITS 12 43 45 LINE SUPPORTS 13 46 47 STOP UNITS 14 48 50 ACCESSORIES 15 51 65 TYPES OF CHAINS 16 66 68 3

STANDARD CODIFICATION SISTEMAS VS COMMERCIAL COMPOSITION J REFERRING TO TYPE OF LINE: LINE 600 6 800 7 900 8 1000 9 J FUNCTION DEFINITION YYY Referring to tables page 5 VS1 CHAIN 5/8 VS2 CHAIN 3/4 DESCRIPTION GROUP J XXX VS1 or VS2 YYY LINE MODULES 700 XXXXX / Tab.1 PALLET 718 J00 / DECELERATORS 760 0700 XX VS / CHAIN TIGHTENER HEADS 702 / MOTORIZED HEADS 702 Tab.2 GEARMOTORS 703 JJ 1 Z 90 Tab.2 SPACERS 716 KXX / TRANSFER UNITS 706 Tab.3 MANUAL WORKING STATIONS 712 S03 INDEX PALLET UNITS 712 Tab.3 ROTARY TABLES UNITS 712 Tab.3 SINGLE LINE SUPPORTS 720 Z00 4

STANDAR CODIFICATION SISTEMAS VS DEFINITION TABLES S TAB.1 CHAIN DEFINITION FOR HEAVY LINE (VS1) Valid for LINE MODULES: YYY DDR DSP CHAIN 5/8 ONLY FOR VS1 LINE DOUBLE IDLE DOUBLE SILENT CHAIN TAB.1 CHAIN DEFINITION FOR HEAVY LINE (VS2) Valid for LINE MODULES: YYY CHAIN 3/4 ONLY FOR VS2 LINE FLR FLYING ROLLER 3/4 (Ø 28) FMP FIP FLYING ROLLER MAGLIE PIANE FLYING ROLLER (With cover accident prevention) TAB.2 GEARMOTOR DEFINITION Valid for MOTORIZED HEAD YYY BNF SEW GEARMOTOR BONFIGLIOLI SEW - EURODRIVE TAB.3 CYLINDER DEFINITION Valid for: - TRANSFER UNITS - INDEX PALLET UNITS - ROTARY TABLES UNITS YYY FST FKP SMC SKP S16 CYLINDER FESTO FESTO with Clamping unit SMC SMC with Clamping unit LAMMAS TAB.4 FEET DEFINITION Valid for: - ALL TYPE OF LINE SUPPORTS YYY Z00 FEET ZINCATO

SISTEMAS VS1 LINE MODULE SECTION AND COMPOSING ELEMENTS THE VS1 LINE MODULE IS MADE BY: 1) Aluminium profiles with hardened steel guides 2) Top cover 3) Chain 4) Nut HARDENED STEEL GUIDES Cod. 770224004 Lenght 1,5 meters POLYDUR GUIDES Cod. 006312003 Available in meters Sistemas VS1 is suitable for: 1) Modules lenght up to 6 meters 2) High speed pallet transfer 3) Load capacity up to 4,5 ton for each module VS1 architecture is based on a load bearing structure of rigid and compact extruded aluminum. It incorporates the hardened chain guides and the pallet containment guides, and functions as containment for all the accessory mechanical groups. The line is sustained by adjustable supports with a maximum capacity of 1500 kg/m. 6 CHAPTER 1

SISTEMAS VS2 LINE MODULE SECTION AND COMPOSING ELEMENTS THE VS2 LINE MODULE IS MADE BY: 1) Aluminium profiles with hardened steel guides 2) Chain cover 3) Chain 4) Intramodular nuts 3 2 1 4 HARDENED STEEL GUIDES Cod. 770224004 Lenght 1,5 meters POLYDUR GUIDES Cod. 006312003 Available in meters Sistemas VS2 is suitable for: 1) Modules lenght up to 20 meters 2) Speed pallet up to 12 m/1 3) Composing the automated warehouse VS2 architecture is based on a load bearing structure of rigid and compact extruded aluminum. It incorporates the hardened chain guides and the pallet containment guides, and functions as containment for all the accessory mechanical groups. The line is sustained by adjustable supports with a maximum capacity of 1500 kg/m. 7 CHAPTER 1

VS1 LINE COMPOSITION VS1 LINE COMPOSITION: 1 LINE MODULE 2 COVER LINE 3 CHAIN TIGHTENER HEAD 4 MOTORIZED HEAD 5 SUPPORT LINE 6 DISTANZIALE 7 SHOCK ABSORBER 8 PALLET PLATE 9 GEARMOTOR 8 CHAPTER 1

VS2 LINE COMPOSITION VS2 LINE COMPOSITION: 7 5 2 6 5 1 3 8 4 1 LINE MODULE 2 CHAIN TIGHTENER HEAD 3 MOTORIZED HEAD 4 SUPPORT LINE 5 SPACER 6 SHOCK ABSORBER 7 PALLET PLATE 8 GEARMOTOR 9 CHAPTER 1

SISTEMAS VS 600/800/900/1000 LINE SECTION VS1 LINE SECTION: Slinding pallet plate A * LINE VS1 QUOTE A VS1 600 515 VS1 800 715 VS1 900 815 VS1 1000 915 * OTHER DIMENSIONES AVAILABLE ON DEMAND VS2 LINE SECTION: Slinding pallet plate * LINE VS2 QUOTE A VS2 600 468 VS2 800 668 VS2 900 768 VS2 1000 868 * OTHER DIMENSIONES AVAILABLE ON DEMAND 10 CHAPTER 1

SISTEMAS VS LINE MODULE ORDERING S 700 J XXXXX YYY LINE KIND MODULE LENGHT (m) CHAIN KIND 700 J XXXXX YYY 700 00500 00700 01000 01500 02000 02500 03000 03500 04000 04500 05000 05500 06000 USED ONLY FOR VS2 LINE 06500 07000 07500 08000 08500 09000 09500 10000 10500 11000 15000 12000 UNTIL 20000 YYY DDR DSP YYY J REFERRING TO TYPE OF LINE: LINE 600 6 800 7 900 8 1000 9 CHAIN KIND FOR VS1 LINE: DOUBLE IDLE DOUBLE SILENT CHAIN XXXXX = Module length (mm) Example: 700 9 01000 DDR FOR VS1 LINE Example: 700 9 01000 FLR FOR VS2 LINE Line module 1000 length 1000 mm VS1 or VS2 VS1 CHAIN KIND FOR VS2 LINE: FLR FLYING ROLLER 3/4 (Ø 28) FMP FLD FIP FLYING ROLLER MAGLIE PIANE FLYING ROLLER (Idle made of derlin) FLYING ROLLER (With cover accident prevention) KIND OF CHAIN CHAPTER 16 J VS2 11 CHAPTER 1

SISTEMAS VS STANDARD PALLET ORDERING S AND TECHNICAL DIMENSIONAL DETAILS 718 J00 VSZ LINE KIND PALLET WEIGHT (Kg) QUOTE (mm) A B C D 600 LINE 47 Kg 370 557 596 17 800 LINE 85 Kg 470 757 796 17 900 LINE 110 Kg 470 857 896 17 1000 LINE 155 Kg 580 957 996 20 J REFERRING TO TYPE OF LINE: LINE J 600 6 800 7 900 8 1000 9 Z LINE KIND: 1 VS1 LINE 2 VS2 LINE NOTE: Lammas can customize rectangular pallets with standard external dimensions NOTE: REFER TO LAMMAS TECHNICAL DEPT.: FOR DIMENSIONAL DETAILS OF PALLETS IN PRESENCE OF INTEGRATED STOP. TO DOWNLOAD.DWG/STEP FILES. 12 CHAPTER 2

SISTEMAS VS STANDARD PALLET TECHNICAL DIMENSIONAL DETAILS EXTERNAL STOP On the upper side all pallet have to be free wide from obstructions, all over the 10 mm area highlighted in order to not compromise the correct working of the external stop. On the lower side do not execute machinig along the axes. These machinig compromise the correct working of the stopper. 13 CHAPTER 2

SISTEMAS VS STANDARD PALLET TECHNICAL DIMENSIONAL DETAILS Minimal quote if assembly of dumper unit is needed. The perimeter of pallet must be free from equipment for 10 mm at least. DUMPER UNIT Minimum height quote for the correct functioning of the line in case of addition of overplates, dumper unit or equipments. No kind of mechanical equipment has to be mounted below the highlighted measure in order to avoid collisions with the external stop. EXTERNAL STOP If pallet accumulation occurs, the use of dumpers avoids: 1) Extreme noise due to pallet bump; 2) Undue stress on stop units; 3) Crushing danger with heavy loads 14 CHAPTER 2

SISTEMAS VS STANDARD PALLET TECHNICAL DIMENSIONAL DETAILS If the addition of equipment or overplates is needed note that they must be above the pallet for 1,5 mm at least, to avoid any malfunction of the stop unit. Do not assembly any equipment on the notchs located on the axes to avoid any further malfunctioning of the stop. 15 CHAPTER 2

SISTEMAS VS SHOCK ABSORBERS ORDERING 760 0700 XX VS NOTE: FOLLOWING THE SCHEME BELOW, CHOOSE THE MOST SUITABLE DAMPER UNIT ACCORDING TO - THE PALLET WEIGHT [KG] (LOADED/EMPTY) - THE CONVEYOR SPEED [MT/MIN]. 16 CHAPTER 3

J REFERRING TO TYPE OF LINE: LINE 600 6 800 7 900 8 1000 9 J SISTEMAS VS1 CHAIN TIGHTENER HEAD ORDERING XXX REFERRING TO CHAIN TIGHTENER TYPE: XXX KIND 410 IN LINE 420 HEAD 430 PERPENDICULAR 702 J XXX VS1 410 In line CHAIN TIGHTENER DEVICE Cod: 760 025 140 420 Head LINE QUOTE A 600 663 800 863 900 963 1000 1063 ASSEMBLY COVER HEAD Cod: 760636 001S03 FOR 600VS1 LINE Cod: 760736 001S03 FOR 800VS1 LINE Cod: 760836 001S03 FOR 900VS1 LINE Cod: 760936 001S03 FOR 1000VS1 LINE 17 CHAPTER 4

SISTEMAS VS1 CHAIN TIGHTENER HEAD ORDERING 702 J XXX VS1 430 Perpendicular (17mm higher than the back) LINE QUOTE A 600 663 800 863 900 963 1000 1063 BRACKET KIT UNIT FOR PERPENDICULAR LINES Cod: 760 070 010 S96 18 CHAPTER 4

SISTEMAS VS2 CHAIN TIGHTENER HEAD ORDERING 702 J XXX VS2 J REFERRING TO TYPE OF LINE: LINE 600 6 800 7 900 8 1000 9 J XXX REFERRING TO CHAIN TIGHTENER TYPE: XXX KIND 410 IN LINE 420 HEAD 430 PERPENDICULAR 410 In line CHAIN TIGHTENER DEVICE Cod: 760 070 148 420 Head LINE QUOTE A 600 678 800 878 900 978 1000 1078 ASSEMBLY COVER HEAD Cod: 860070045 19 CHAPTER 4

SISTEMAS VS2 CHAIN TIGHTENER HEAD ORDERING 702 J XXX VS2 430 Perpendicular (17mm higher than the back) LINE QUOTE A 600 678 800 878 900 978 1000 1078 BRACKET KIT UNIT FOR PERPENDICULAR LINES Cod: 860 070 010 NOTE: In case of heavy and unstable weight we add a special support pallet and its relative cover. SUPPORT PALLET FOR VS2 LINE Cod. 860 070 014 COVER TIGHTENER HEAD FOR VS2 1000 LINE Cod. 860 070 023 (ONLY FOR VS2 1000 LINE) Plate to link the heads, in case of heavy pallets. NOTE: If you need more protection, you can use a special cover head. ASSEMBLY COVER HEAD FOR VS2 LINE Cod. 860 FOR 600 VS2 LINE Cod. 860 FOR 800 VS2 LINE Cod. 860 FOR 900 VS2 LINE Cod. 860 070 021 FOR 1000 VS2 LINE 20 CHAPTER 4

J REFERRING TO TYPE OF LINE: LINE 600 6 800 7 900 8 1000 9 J SISTEMAS VS1 MOTORIZED HEAD ORDERING XXX REFERRING TO MOTORIZED HEAD TYPE: XXX KIND 510 IN LINE 520 HEAD 530 PERPENDICULAR 702 J XXX VS1 YYY YYY REFERRING TO GEARMOTOR BNF SEW BONFIGLIOLI SEW-EURODRIVE NOTE: GEARMOTOR NOT INCLUDED, SEE CHAPTER 6 510 In line 520 Head LINE QUOTE A 600 663 800 863 900 963 1000 1063 ASSEMBLY COVER HEAD Cod: 760636 001S03 FOR 600VS1 LINE Cod: 760736 001S03 FOR 800VS1 LINE Cod: 760836 001S03 FOR 900VS1 LINE Cod: 760 936 001 S03 FOR 1000 VS1 LINE 21 CHAPTER 5

SISTEMAS VS1 MOTORIZED HEAD ORDERING 702 J XXX VS1 YYY 530 Perpendicular (17mm higher than the back) LINE QUOTE A 600 663 800 863 900 963 1000 1063 BRACKET KIT UNIT FOR PERPENDICULAR LINES Cod: 760 070 010 S96 22 CHAPTER 5

SISTEMAS VS1 MOTORIZED HEAD UNDER HEAD ORDERING 702 J XXX VS1 YYY J REFERRING TO TYPE OF LINE: LINE 600 6 800 7 900 8 J XXX REFERRING TO MOTORIZED HEAD TYPE: NOTE: The motorized heads under head are used if dimensional problems occur. The gearmotor is positioned under the head and the trasmission occur by the chain trasmission. XXX KIND 610 IN LINE 620 HEAD 630 PERPENDICULAR 1000 9 NOTE: GEARMOTOR NOT INCLUDED, SEE CHAPTER 6 YYY BNF SEW KIND OF GEARMOTOR BONFIGLIOLI SEW-EURODRIVE 610 In line TENSIONING DEVICE Cod: 760 025 148 620 Head LINE QUOTE A 600 663 800 863 900 963 1000 1063 ASSEMBLY COVER HEAD Cod: 760636 001S03 FOR 600VS1 LINE Cod: 760736 001S03 FOR 800VS1 LINE Cod: 760836 001S03 FOR 900VS1 LINE Cod: 760 936 001 S03 FOR 1000 VS1 LINE 23 CHAPTER 5

SISTEMAS VS1 MOTORIZED HEAD ORDERING 702 J XXX VS1 YYY 630 Perpendicular (17mm higher than the back) LINE QUOTE A 600 663 800 863 900 963 1000 1063 BRACKET KIT UNIT FOR PERPENDICULAR LINES Cod: 760 070 010 S96 24 CHAPTER 5

J REFERRING TO TYPE OF LINE: LINE J 600 6 800 7 900 8 1000 9 SISTEMAS VS2 MOTORIZED HEAD ORDERING XXX REFERRING TO MOTORIZED HEAD TYPE: XXX KIND 510 IN LINE 520 HEAD 530 PERPENDICULAR 702 J XXX VS2 YYY YYY REFERRING TO GEARMOTOR BNF SEW BONFIGLIOLI SEW-EURODRIVE NOTE: GEARMOTOR NOT INCLUDED, SEE CHAPTER 6 510 In line 520 Head LINE QUOTE A 600 678 800 878 900 978 1000 1078 ASSEMBLY COVER HEAD Code 86007045 25 CHAPTER 5

SISTEMAS VS2 MOTORIZED HEAD ORDERING 702 J XXX VS2 YYY 530 Perpendicular (17mm higher than the back) LINE QUOTE A 600 678 800 878 900 978 1000 1078 BRACKET KIT UNIT FOR PERPENDICULAR LINES Cod: 860 070 010 NOTE: In case of heavy and unstable weight we add an special support pallet and its relative cover. SUPPORT PALLET FOR VS2 LINE Cod. 860 070 014 COVER TIGHTENER HEAD FOR VS2 1000 LINE Cod. 860 070 022 (ONLY FOR VS2 1000 LINE) Plate to link the heads, in case of heavy pallets. NOTE: If you need more protection at the motorized shaft, you can use a special cover head. ASSEMBLY COVER HEAD FOR VS2 LINE Cod. 860 FOR 600 VS2 LINE Cod. 860 FOR 800 VS2 LINE Cod. 860 FOR 900 VS2 LINE Cod. 860 070 021 FOR 1000 VS2 LINE 26 CHAPTER 5

SISTEMAS VS2 MOTORIZED HEAD UNDER HEAD ORDERING 702 J XXX VS2 YYY J REFERRING TO TYPE OF LINE: LINE 600 6 800 7 900 8 J XXX REFERRING TO MOTORIZED HEAD TYPE: NOTE: The motorized heads under head are used if dimensional problems occur. The gearmotor is positioned under the head and the trasmission occur by the chain trasmission. XXX KIND 610 IN LINE 620 HEAD 630 PERPENDICULAR 1000 9 NOTE: GEARMOTOR NOT INCLUDED, SEE CHAPTER 6 YYY BNF SEW KIND OF GEARMOTOR BONFIGLIOLI SEW-EURODRIVE 610 In line TENSIONING DEVICE Cod: 760 025 148 620 Head LINE QUOTE A 600 678 800 878 900 978 1000 1078 ASSEMBLY COVER HEAD Cod: 770 101 078-DX Cod: 770 101 078-SX 27 CHAPTER 5

SISTEMAS VS2 MOTORIZED HEAD ORDERING 702 J XXX VS2 YYY 630 Perpendicular (17mm higher than the back) LINE QUOTE A 600 678 800 878 900 978 1000 1078 BRACKET KIT UNIT FOR PERPENDICULAR LINES Cod: 860 070 010 28 CHAPTER 5

SISTEMAS VS GEARMOTORS ORDERING 703 JJ 1 Z 90 YYY JJ CHAIN SPEED (m/min) 02 4.5 Z ASSEMBLING OF GEARMOTOR YYY BRAND OF GEARMOTOR 12 6 0 FOR LINE MODULE BNF BONFIGLIOLI 22 9 32 12 9 FOR TRANSFER UNIT SEW SEW - EURODRIVE NOTE: THE DIMENSIONS ARE APPROXIMATED. THE DIMENSIONS HAS TO BE CHECKED IN BASE OF THE GEARMOTOR BRAND. 29 CHAPTER 6

SISTEMAS VS SPACERS ORDERING 716 J K XX VSZ J REFERRING TO TYPE OF LINE: LINE 600 6 800 7 900 8 1000 9 WE PROVIDE THREE DIFFERENT KIND OF STOP UNIT: SPACER WITH SHORT STOP UNIT J KXX REFERRING TO TYPE OF SPACER: SPACER KXX SIMPLE SPACER 000 SPACER + COUNTERSTOP 001 SPACER + PALLET READER 005 SPACER + FIXED STOP UNIT 009 SPACER + STOP UNIT SPACER + STOP UNIT + FIXED STEM K10 K50 SPACER + BIDIRECTIONAL STOP UNIT 080 BIDIRECTIONAL DAMPERED STOP UNIT SPACER + PNEUMATIC STOP UNIT STOP UNIT + PALLET READER + TWEEZER KIT K81 K95 K96 LIGHT SPACER 099 Z LINE KIND: 1 VS1 LINE 2 VS2 LINE K=2 SPACER WITH MEDIUM STOP UNIT K=3 SPACER WITH LONG STOP UNIT K=1 K REFERRING TO DIMENSIONS OF STOP UNIT: STOP UNIT K APPLICATION SHORT 2 Weight of pallet up to 1000 kg MEDIUM 3 Special app for rotary tablet LONG 1 Weight of pallet up to 1500 kg and conveyor speed 12 m/sec THE RIGHT KIND OF STOP UNIT IS CHOSEN CONSIDERING: - THE WEIGHT OF THE PALLET - THE SPEED OF THE CHAIN. REFER TO LAMMAS TECHNICAL DEPARTEMENT IN ORDER TO CHOOSE THE CORRECT STOP UNIT. NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). 30 CHAPTER 7

000 SIMPLE SPACER SISTEMAS VS SPACERS ORDERING 716 J K XX VSZ PALLET IN ENTRANCE 001 SPACER + COUNTERSTOP COUNTERSTOP Code 455333000 005 SPACER + PALLET READER OPTION: SENSOR Ø18 Code 001417748 KIND OF PALLET READER A (mm) Short bracket Cod. 760070164 86 31 CHAPTER 7

SISTEMAS VS SPACERS ORDERING 716 J K XX VSZ 009 SPACER WITH FIX STOP UNIT HEAD KIT Cod. 760070134 OPTIONAL: N 1 SENSOR Ø12 Cod. 001415748 K10 SPACER + STOP UNIT OPTION: N 2 SENSOR Ø12 Cod. 001415748 OPTION: N 1 SHOCK ABSORBER HEAD KIT Cod. 760070134 K50 SPACER + STOP UNIT + FIXED STEM OPTION: N 1 SENSOR Ø12 Cod. 001415748 OPTION: N 1 SHOCK ABSORBER HEAD KIT Cod. 760070134 32 CHAPTER 7

SISTEMAS VS SPACERS ORDERING 716 J K XX VSZ 080 SPACER + BIDIRECTIONAL STOP UNIT HEAD KIT Cod. 760070135 K81 SPACER + BIDIRECTIONAL DAMPERED STOP UNIT OPTION: N 2 SENSOR Ø12 Cod. 001415748 OPTION: N 2 SENSOR Ø12 Cod. 001415748 OPTION: N 1 SHOCK ABSORBER HEAD KIT Cod.760070135 K95 SPACER + PNEUMATIC STOP UNIT OPTION: N 2 SENSOR Ø12 Cod. 001415748 OPTION: N 1 SHOCK ABSORBER HEAD KIT Cod. 760070134 33 CHAPTER 7

SISTEMAS VS SPACERS ORDERING 716 J K XX VSZ 099 SIMPLE SPACER UNDER LINE CHEAPER SPACER (Light solution) ACCESSORIES STOP UNIT ( see chapter 14) ACCESSORIES BRACKET FOR STOP UNIT Cod. 860 070 043 NOTE: REFER TO LAMMAS TECHNICAL DEPT.: FOR DIMENSIONAL DETAILS OF SPACERS. ACCESSORIES THAT IT CAN BE MOUNTED. ORDERING. UNDER LINE SPACER Cod: 860 716 003 FOR 1000 LINE VS2 34 CHAPTER 7

SISTEMAS VS TYPES OF TRANSFER UNITS OVERALL DIMENSIONS NOTE: THE LIFTING OF PALLET OCCURS THANKS TO DOUBLE EFFECT PNEUMATIC FESTO CYLINDER BORE 125 MM STROKE 80 MM. FOLLOWING THE SIZE OF LINE ARE USED FROM 1 TO 3 PNEUMATIC FESTO CYLINDER. GEARMOTOR IT IS USED TO MOVE THE CHAIN AND TRANSFER PALLET PNEUMATIC CYLINDER IT IS USED TO INDEX PALLET THE INDEX PALLET OF TRANSFER UNIT OCCURS THANK CYLINDERS AND A ECCENTRIC GROUP Following the pallet weight we use one, two or three cylinders LINE NUMBER OF CYLINDERS MAXIMUM CAPACITY (Kg) 600 1 600 Kg 800 2 1000 Kg 900 2 1000 Kg 1000 3 1500 Kg 35 CHAPTER 8

SISTEMAS VS END TRANSFER UNITS ORDERING 706 J XXX VSZ YYY J REFERRING TO TYPE OF LINE: LINE J 600 6 DEFINITION XXX : Numbers from 011 to 023 Z LINE KIND: 1 VS1 LINE 2 VS2 LINE DEFINITION YYY : Referring to cylinder See Tab. 3 page 5 800 7 900 8 1000 9 NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). 011 PERPENDICULAR TOP-DOWN NOTE: ORIGIN LINE 17 mm HIGHEST LEFT RIGHT 1) N 1 Transfer unit 2) 716 J 205 VSZ n 1 Spacer type 205 3) 716 J 000 VSZ n 1 Spacer type 201 4) 716 J 210 VSZ n 1 Spacer type 210 5) 760015018 - n 1 External stop for VS1 line 455362800 n 1 External stop for VS2 line OPTIONS: N 2 Shock absorbers N 1 Sensor kit () N 1 Sensor Ø12 (001415748) Stop unit LINE QUOTE A QUOTE B QUOTE C QUOTE D QUOTE E VS1 VS2 VS1 VS2 VS1 VS2 VS1 VS2 VS1 VS2 600 663 678 800 863 878 900 963 978 1000 1063 1078 36 CHAPTER 9

SISTEMAS VS END TRANSFER UNITS ORDERING 706 J XXX VSZ YYY J REFERRING TO TYPE OF LINE: LINE J 600 6 DEFINITION XXX : Numbers from 011 to 023 Z LINE KIND: 1 VS1 LINE 2 VS2 LINE DEFINITION YYY : Referring to cylinder See Tab. 3 page 5 800 7 900 8 1000 9 NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). 012 PERPENDICULAR BOTTOM-UP NOTE: ORIGIN LINE 17 mm LOWER LEFT RIGHT 1) N 1 Transfer unit 2) 716 J 205 VSZ n 1 Spacer type 205 3) 716 J 000 VSZ n 1 Spacer type 201 4) 716 J 250 VSZ n 1 Spacer type 250 OPTIONS: N 2 Shock absorbers N 1 Sensor kit () N 1 Sensor Ø12 (001415748) Stop unit LINE QUOTE A QUOTE B QUOTE C QUOTE D QUOTE E VS1 VS2 VS1 VS2 VS1 VS2 VS1 VS2 VS1 VS2 600 663 678 800 863 878 900 963 978 1000 1063 1078 37 CHAPTER 9

SISTEMAS VS SHUNTING TRANSFER UNIT ORDERING 706 J XXX VSZ YYY J REFERRING TO TYPE OF LINE: LINE J 600 6 DEFINITION XXX : Numbers from 011 to 023 Z LINE KIND: 1 VS1 LINE 2 VS2 LINE DEFINITION YYY : Referring to cylinder See Tab. 3 page 5 800 7 900 8 1000 9 NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). 021 PERPENDICULAR NOTE: ORIGIN LINE 17 mm LOWER LEFT RIGHT 1) N 1 Transfer unit 2) 716 J 205 VSZ n 2 Spacer type 205 3) 716 J 000 VSZ n 1 Spacer type 201 4) 716 J 210 VSZ n 2 Spacer type 210 OPTIONS: N 2 Shock absorbers N 1 Sensor kit () N 2 Sensor Ø12 (001415748) Stop unit LINE QUOTE A QUOTE B QUOTE C QUOTE D QUOTE E QUOTE F VS1 VS2 VS1 VS2 VS1 VS2 VS1 VS2 VS1 VS2 VS1 VS2 600 663 678 800 863 878 900 963 978 1000 1063 1078 38 CHAPTER 9

SISTEMAS VS SHUNTING TRANSFER UNIT ORDERING 706 J XXX VSZ YYY J REFERRING TO TYPE OF LINE: LINE J 600 6 DEFINITION XXX : Numbers from 011 to 023 Z LINE KIND: 1 VS1 LINE 2 VS2 LINE DEFINITION YYY : Referring to cylinder See Tab. 3 page 5 800 7 900 8 1000 9 NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). 052 SIDE BY SIDE PARALLEL LINES NOTE: ORIGIN LINE 17 mm LOWER LEFT RIGHT 1) N 1 Transfer unit 2) 716 J 205 VSZ n 1 Spacer type 205 3) 716 J 210 VSZ n 1 Spacer type 210 4) 760015018 - n 1 External stop for VS1 line 455362800 n 1 External stop for VS2 line OPTIONS: N 2 Shock absorbers N 1 Sensor kit () N 1 Sensor Ø12 (001415748) Stop unit LINE QUOTE A QUOTE B QUOTE C QUOTE D VS1 VS2 VS1 VS2 VS1 VS2 VS1 VS2 600 663 678 800 863 878 900 963 978 1000 1063 1078 39 CHAPTER 9

J REFERRING TO TYPE OF LINE: LINE J 600 6 800 7 900 8 1000 9 SISTEMAS VS MANUAL WORKING STATIONS ORDERING DEFINITION XXX : Number 020 Z LINE KIND: 1 VS1 LINE 2 VS2 LINE NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). 712 J XXX VS Z 020 MANUAL WORKING STATION WITH STOP UNIT AND COUNTERSTOP 1) 716 J K10 VSZ N 1 SPACER type 010 2) 716 J 001 VSZ N 1 SPACER type 001 OPTIONAL: N 1 SHOCK ABSORBER N 1 SENSOR KIT (712X020090S96) LINE QUOTE A QUOTE B QUOTE C VS1 VS2 VS1 VS2 VS1 VS2 600 663 678 800 863 878 429,5 432,5 900 963 978 1000 1063 1078 549 552 40 CHAPTER 10

SISTEMAS VS INDEX PALLET UNITS ORDERING 712 J XXX VS Z YYY J REFERRING TO TYPE OF LINE: LINE J 600 6 XXX LIFTING HEIGHT FROM CHAIN LEVEL (mm) QUOTE Z (mm) 050 4 253 Z LINE KIND: 1 VS1 LINE 2 VS2 LINE YYY FST FKP CYLINDER FESTO FESTO with Clamping unit 800 7 051 16 266 SMC SMC 900 8 052 41 291 SKP SMC with Clamping unit 1000 9 S16 LAMMAS NOTE: SHOCK ABSORBER EXCLUDED, TO BE ORDERED SEPARATELY, CONSIDERING: - THE PALLET WEIGHT (LOADED AND EMPTY) - THE CONVEYOR SPEED (SEE CHAPTER 3). INDEX PALLET OCCURS THANKS TO A DOUBLE EFFECT PNEUMATIC CYLINDER BORE Ø125. WE GUARANTEE CENTERING PALLET WITH ± 0,1 mm. LIGHT VERSION MAXIMUM LIFTER OF 500 Kg. IT IS USED FOR LIGHT WEIGHT OF PALLETS. IT HAS ONLY 1 CYLINDER VERTICAL MOUNTED. PALLET 41 CHAPTER 11

J REFERRING TO TYPE OF LINE: LINE J 600 6 XXX SISTEMAS VS INDEX PALLET UNITS ORDERING NUMBER OF CYLINDER WEIGHT 010 1 Up tp 500 Kg 020 2 500 1000 Kg Z LINE KIND: 1 VS1 LINE 2 VS2 LINE 712 J XXX VS Z YYY YYY FST FKP CYLINDER FESTO FESTO with Clamping unit 800 7 030 3 1000 1500 kg SMC SMC 900 8 1000 9 SKP S16 SMC with Clamping unit LAMMAS NOTE: SHOCK ABSORBER EXCLUDED, TO BE ORDERED SEPARATELY, CONSIDERING: - THE PALLET WEIGHT (LOADED AND EMPTY) - THE CONVEYOR SPEED (SEE CHAPTER 3). LIFTING HEIGHT FROM CHAIN LEVEL 4 mm. WE GUARANTEE CENTERING PALLET WITH ± 0,1 mm. HEAVY VERSION LIFTER FROM 500 Kg TO 1500 Kg. ECCENTRIC GROUP PALLET DOUBLE EFFECT PNEUMATIC CYLINDER BORE Ø125. INDEX PALLET UNIT WITH TWO CYLIDERS FOLLOWING THE PALLET WEIGHT USE ONE, TWO OR THREE CYLINDERS. 42 CHAPTER 11

SISTEMAS VS INDEX PALLET UNITS ORDERING LINE QUOTE A QUOTE B QUOTE C QUOTE D QUOTE E 712 J XXX VS Z YYY VS1 VS2 VS1 VS2 VS1 VS2 VS1 VS2 VS1 VS2 600 663 678 800 863 878 900 963 978 1000 1063 1078 Pallet entry side Slinding pallet plate 1) 455 203 200 n 1 Transfer unit 2) 716 J K10 VSZ n 2 Spacer 10 3) 716 J K01 VSZ n 1 Spacer 01 OPTIONALS: N 1 Sensor kit () N 2 Shock absorbers 43 CHAPTER 11

J REFERRING TO TYPE OF LINE: LINE J 600 6 800 7 900 8 1000 9 XXX SISTEMAS VS ROTARY TABLES UNITS ORDERING KIND OF ROTARY TABLES UNITS 061 90 INDEX AND ROTATION 062 180 INDEX AND ROTATION Z LINE KIND: 1 VS1 LINE 2 VS2 LINE INDEX PALLET OCCURS THANKS DOUBLE EFFECT PNEUMATIC CYLINDER BORE Ø125 mm STROKE 90 mm. THE ROTATION OCCUR BY ROTATING PNEUMATIC CYLINDER BORE Ø 80 ± 125 mm. 712 J XXX VS Z YYY YYY FST FKP SMC SKP CYLINDER FESTO FESTO with Clamping unit SMC SMC with Clamping unit NOTE: SHOCK ABSORBER EXCLUDED, TO BE ORDERED SEPARATELY, CONSIDERING: - THE PALLET WEIGHT (LOADED AND EMPTY) - THE CONVEYOR SPEED (SEE CHAPTER 3). WE GUARANTEE CENTERING PALLET WITH ± 0,1 mm. S16 LAMMAS ROTATION PALLET POSITION NUT USED FOR ROTATION AT 90 OR 180. ROTARY TABLE UNIT WITH TWO CYLIDERS CYLINDERS FOLLOWING THE PALLET WEIGHT WE USE ONE, TWO OR THREE CYLINDERS ROTATING PNEUMATIC CYLINDER OCCURS THE ROTATION ECCENTRIC GROUP 44 CHAPTER 12

SISTEMAS VS ROTARY TABLES UNITS ORDERING LINE QUOTE A QUOTE B QUOTE C QUOTE D 712 J XXX VS Z YYY VS1 VS2 VS1 VS2 VS1 VS2 VS1 VS2 600 663 678 800 863 878 900 963 978 1000 1063 1078 Pallet entry side Slinding pallet plate 1) n 1 Rotary table unit 2) 716 J K01 VSZ n 1 Spacer 01 3) 716 J K10 VSZ n 2 Spacer 10 OPTIONALS: N. 1 Sensor kit () N. 2 Shock absorbers 45 CHAPTER 12

SISTEMAS VS1 SINGLE LEG VS1 720 J XXX VS1 Z00 XXX QUOTE A 085 952 080 902 075 852 070 802 065 752 060 702 055 652 QUOTE C Example Sistemas 1000 VS1 Single Leg with sliding plane A= 652 Ordering code: 720 9 055 VS1 Z00 Code J Code XXX J REFERRING TO TYPE OF LINE: LINE J 600 6 800 7 900 8 1000 9 050 602 QUOTE B REFERRING TO LINE: 045 552 LINE QUOTE B 040 502 035 452 030 402 025 352 600 493 800 693 900 963 1000 893 PALLET SLIDING PLANE NOTE: ADJUSTING HEIGHT RANGE OF THE FOOT +30-20 MM SUPPORT FOR VS1 LINE 46 CHAPTER 13

SISTEMAS VS2 SINGLE LEG VS2 720 J XXX VS2 Z00 XXX QUOTE A QUOTE C 085 952 080 902 075 852 070 802 065 752 060 702 055 652 050 602 045 552 040 502 035 452 030 402 025 352 020 302 Example Sistemas 800 VS2 Single Leg with sliding plane A= 452 Ordering code: 720 7 035 VS2 Z00 Code J QUOTE B BASING ON TYPE OF LINE: LINE 600 800 900 1000 Code XXX QUOTE B J REFERRING TO TYPE OF LINE: LINE J 600 6 800 7 900 8 1000 9 PALLET SLIDING PLANE NOTE: ADJUSTING HEIGHT RANGE OF THE FOOT +30-20 MM SUPPORT FOR VS2 LINE 47 CHAPTER 13

SISTEMAS VS STOP UNIT AND ITS HEAD KITS STOP UNIT COMPOSITION HEAD KIT STOP GROUP 770 213 475 AMORTIZED UNIT 770 143 308 SENSOR Ø12 OPTIONAL STANDARD STOP HEAD KITS HEAD KIT Cod. 760 070 134 HEAD KIT Cod. 760 070 135 48 CHAPTER 14

SISTEMAS VS STOP UNIT AMORTIZED STOP UNIT FIXED STOP UNIT SHORT AMORTIZED STOP UNIT WITH STEM EXTRACTION COD. 773 000 2 10 WITHOUT STEM EXTRACTION COD. 773 000 2 50 SHORT FIXED STOP UNIT WITH STEM EXTRACTION COD. 773 000 2 09 MEDIUM AMORTIZED STOP UNIT WITH STEM EXTRACTION COD. 773 000 3 10 WITHOUT STEM EXTRACTION COD. 773 000 3 50 K REFERRING TO DIMENSIONS OF STOP UNIT: LONG AMORTIZED STOP UNIT WITH STEM EXTRACTION COD. 773 000 1 10 WITHOUT STEM EXTRACTION COD. 773 000 1 50 STOP UNIT K SHORT 2 MEDIUM 3 LONG 1 APPLICATION Weight of pallet up to 1000 kg Special app for rotary tablet Weight of pallet up to 1500 kg and conveyor speed 12 m/sec The stem position is read by 1 sensor Ø12 (Cod. 001 415 718) and position bracket (Cod. 760 070 125). 49 CHAPTER 14

SISTEMAS VS STOP UNIT BI-DIRECTIONAL AMORTIZED STOP UNIT BI-DIRECTIONAL FIXED STOP UNIT SHORT BI-DIRECTIONAL AMORTIZED STOP UNIT COD. 773 000 2 81 SHORT BI-DIRECTIONAL FIXED STOP UNIT COD. 773 000 2 80 MEDIUM BI-DIRECTIONAL AMORTIZED STOP UNIT COD. 773 000 3 81 MEDIUM BI-DIRECTIONAL FIXED STOP UNIT COD. 773 000 3 81 LONG BI-DIRECTIONAL AMORTIZED STOP UNIT COD. 773 000 1 81 LONG BI-DIRECTIONAL FIXED STOP UNIT COD. 773 000 1 81 The stem position is read by 1 sensor Ø12 (Cod. 001 415 718) and position bracket (Cod. 760 070 125). 50 CHAPTER 14

SISTEMAS VS STOP UNIT AMORTIZED STOP UNIT WITH PNEUMATIC RETAIN COD. 773 000 Z 95 SHORT AMORTIZED STOP UNIT WITH PNEUMATIC RETAIN COD. 773 000 2 95 STOP UNIT K REFERRING TO DIMENSIONS OF STOP UNIT: K SHORT 2 MEDIUM 3 LONG 1 APPLICATION Weight of pallet up to 1000 kg Special app for rotary tablet Weight of pallet up to 1500 kg and conveyor speed 12 m/sec MEDIUM AMORTIZED STOP UNIT WITH PNEUMATIC RETAIN COD. 773 000 3 95 LONG AMORTIZED STOP UNIT WITH PNEUMATIC RETAIN COD. 773 000 1 95 The stem extraction thanks double effect pneumatic cylinder bore 40 mm stroke 15 mm with spring return. The stem position is read by 1 sensor Ø12 (Cod. 001 415 718) and position bracket (Cod. 760 070 125). 51 CHAPTER 14

SISTEMAS VS OLD VERSION STOP UNIT AMORTIZED STOP UNIT Cod. 773 000 007 S03 WITH STEM EXTRACTION Cod. 773 000 008 S03 WITHOUT STEM EXTRACTION FIXED STOP UNIT Cod. 773 000 015 S03 WITH STEM EXTRACTION BI-DIRECTIONAL AMORTIZED STOP UNIT Cod. 773000014S03 BI-DIRECTIONAL FIXED STOP UNIT Cod. 773 000 010 S03 The stem position is read by 1 sensor Ø12 (Cod. 001 415 718) and position bracket (Cod. 760 070 125). 52 CHAPTER 14

SISTEMAS VS OLD VERSION STOP UNIT AMORTIZED STOP UNIT WITH PNEUMATIC RETAIN Cod. 773 000 009 S03 The stem position is read by 1 sensor Ø12 (Cod. 001 415 718) and position bracket (Cod. 760 070 125) BI-DIRECTIONAL AMORTIZED STOP UNIT WITH PNEUMATIC RETAIN Cod. 773 000 012 S03 The stem extraction is managed by double effect pneumatic cylinder bore 40 mm stroke 15 mm with spring return. 53 CHAPTER 14

SISTEMAS ACCESSORIES STOP UNITS ACCESSORIES DRAWING NOTE COUNTERSTOP COD. 455333000 USED TO STOP PALLET. HEAVY COUNTERSTOP Cod. 455333200 USED TO STOP PALLET. (USED ONLY IN SPECIAL CASES). EXTERNAL STOP UNIT COD. 760015018 VS1 COD. 455362800 VS2 OPTIONALS: 1 SENSOR Ø12 (001415748) 1 SHOCK ABSORBER EXTERNAL STOP UNIT WITH PENUMATIC RETAIN COD. 455362850 VS2 OPTIONALS: 1 SENSOR Ø12 (001415748) 1 SHOCK ABSORBER 54 CHAPTER 16

SISTEMAS ACCESSORIES NUTS ACCESSORIES DRAWING NOTE T-NUT VS1 COD. 770111001 M6 HOLE COD. 770111078 M5 HOLE COD. 770111077 M4 HOLE T-NUT VS2 COD. 770111007 M8 HOLE USED TO FIX ACCESSORIES TO VS1 LAMMAS PROFILE. USED TO FIX ACCESSORIES TO VS2 LAMMAS PROFILE. INTRAMODULAR NUT VS1 COD. 780000190S96 KIT COD. 770111002 USED TO JOIN VS1 LAMMAS PROFILE. INTRAMODULAR NUT VS2 COD. 860070017 KIT COD. 770111167 USED TO JOIN VS2 LAMMAS PROFILE. INTRAMODULAR NUT VS2 COD. 860070018 KIT COD. 770111168 USED TO ALIGN MOTORIZED/CHAIN THIGTENER HEADS ON LAMMAS MODULES. KIT STOP COVER NUT COD. 100300KIT USED TO FIX VS1 LAMMAS COVERS ON LINE MODULES. ZINC COATED INSERT COD. 770323001 APPLIED ON FEET. NUT FIXING STEEL ROD COD. 770111138 USED TO FIX HARDENED STEEL GUIDES ON LINE MODULES. 55 CHAPTER 16

SISTEMAS ACCESSORIES NUTS ACCESSORIES DRAWING NOTE NUT OVER PLATE KIT COD. 760070266 FOR WEIGHT < 50 Kg (POLYDUR) COD. 760070 FOR WEIGHT > 50 Kg (IRON) HARDENED STEEL GUIDE COD. 770224004 USED TO UP OVER PLATE IN ORDER TO NOT CREATE MALFUCTIONS OF ACCESSORIES. USED TO GUIDE LAMMAS CHAIN ON LINE MODULES. AVAILABLE IN ROD 1,5 METERS PLASTIC GUIDE COD. 006312003 USED TO GUIDE LAMMAS CHAIN ON LINE MODULES. AVAILABLE IN METERS 56 CHAPTER 16

SISTEMAS ACCESSORIES SENSORS AND SUPPORTS ACCESSORIES DRAWING NOTE SENSOR Ø12 COD. 001415748 USED TO READ THE POSITION OF STOP UNIT OR OTHER DEVICES. SENSOR Ø18 COD. 001417748 USED TO READ PALLET POSITION. SENSOR SUPPORT Ø12 COD. 001402312 USED TO HOLD SENSOR Ø12. SENSOR SUPPORT Ø18 COD. USED TO HOLD SENSOR Ø18. SENSOR SUPPORT Ø18 FOR SPACER COD. 455333000 USED TO HOLD SENSOR Ø18 IN ORDER TO READ THE PALLET POSITION. STOP BUSH COD. 770121111 ASSEMBLED WITH SHOCK ABSORBER. PLATE FOR SENSOR SUPPORT Ø12 COD. 455098412 USED TO BRING SENSOR SUPPORT Ø12. 57 CHAPTER 16

SISTEMAS ACCESSORIES SENSORS AND SUPPORTS ACCESSORIES DRAWING NOTE SENSOR BUSH VS2 COD. 770142346 FOR Ø12 SENSORS COD. 770142347 FOR Ø18 SENSORS USED TO HOLD SENSOR Ø12/Ø18 IN ORDER TO READ THE STOP UNIT POSITION. 58 CHAPTER 16

SISTEMAS ACCESSORIES BRACKETS ACCESSORIES DRAWING NOTE STOP UNIT BRACKET COD. 860070043 KIT COD. 770213486 USED TO FIX STOP ON MOTORIZED/CHAIN-TIGHTENER HEADS. BRACKET FIXING FLOOR COD. 860070042 KIT COD. 770142321 USED TO FIX LEGS ON FLOOR. PROFILES CONNECTION BRACKET VS1 COD. 760070176 KIT COD. 770142220 USED TO CONNECT 60X80 LAMMAS FROFILES ON VS1 LINE MODULES. PROFILES CONNECTION BRACKET VS2 COD. 760070197 KIT COD. 770142227 USED TO CONNECT 60X80 LAMMAS FROFILES ON VS2 LINE MODULES. PROFILE CONNECTION BRACKET (SMALL) COD. 760070094 KIT COD. 770142091 PERPENDICULAR BRACKET COD. 760070010S96 KIT VS1 COD. 860070010 KIT VS2 USED TO CONNECT LIGHT LAMMAS FROFILES. USED TO CONNECTS PERPENDICULAR LINE MODULES. 59 CHAPTER 16

SISTEMAS ACCESSORIES ACCESSORIES ACCESSORIES DRAWING NOTE CHAIN TIGHTENER DEVICE VS1 COD. 760025140 USED TO TENSION VS1 CHAIN. CHAIN TIGHTENER DEVICE VS2 COD. 760070148 USED TO TENSION VS2 CHAIN. CLAMP KIT COD. 860070032 APPLIED WITH STOP UNIT ON SPACER. OIL COLLECTION CUP COD. 760070122 KIT VS1 COD. 860070012 KIT VS2 COD. 770201275 APPLIED UNDER MOTORIZED/CHAIN TIGHTENER HEAD IN JUNCTION OF LINE MODULE. PALLET SUPPORT COD. 860070005 USED TO DRIVE PALLET. PALLET SUPPORT COD. 860070004 USED TO DRIVE PALLET. PALLET SUPPORT COD. 860070009 USED TO DRIVE PALLET. 60 CHAPTER 16

SISTEMAS ACCESSORIES ACCESSORIES ACCESSORIES DRAWING NOTE PALLET SUPPORT VS2 COD. 860070014 USED TO DRIVE VS2 PALLET. PALLET SUPPORT VS1 COD. 455219000 USED TO DRIVE VS1 PALLET. VS1 MOTORIZED HEAD PROFILE (WITH HOLE) COD. 760031011 USED IN MOTORIZED HEADS. VS1 MOTORIZED HEAD PROFILE (WITHOUT HOLE) COD. 760031010 USED IN MOTORIZED HEADS. VS1 CHAIN TIGHTENER HEAD PROFILE COD. 760031006 (RIGHT) COD. 760031013 (LEFT) USED IN CHAIN TIGHTENER PROFILE. 61 CHAPTER 16

SISTEMAS ACCESSORIES ACCESSORIES ACCESSORIES DRAWING NOTE VS2 MOTORIZED HEAD PROFILE COD. 860031015 USED IN MOTORIZED HEADS. VS2 CHAIN TIGHTENER HEAD PROFILE COD. 860031018 USED IN CHAIN TIGHTENER PROFILE. 62 CHAPTER 16

SISTEMAS ACCESSORIES COVERS ACCESSORIES DRAWING NOTE COVER HEAD VS1 COD: 760636001S03 600 VS1 COD: 760736001S03 800 VS1 COD: 760836001S03 900 VS1 COD: 760936001S03 1000 VS1 COVER HEAD VS2 COD. 860070045 KIT COD. 770101078DX COD: 770101078SX USED TO COVER VS1 MOTORIZED/CHAIN TIGHTENER HEADS. USED TO COVER VS2 MOTORIZED/CHAIN TIGHTENER HEADS. COVER HEAD VS2 COD. 860 600 COD. 860 800 COD. 860 900 COD. 860070021 1000 COVER TIGHTENER HEAD VS2 COD. 860070023 ONLY FOR 1000 VS2 LINE USED TO COVER VS2 MOTORIZED/CHAIN TIGHTENER HEADS. USED TO COVER VS2 CHAIN TIGHTENER HEADS. COVER MOTORIZED HEAD VS2 COD. 860070022 ONLY FOR 1000 VS2 LINE USED TO COVER VS2 MOTORIZED HEADS. 63 CHAPTER 16

SISTEMAS ACCESSORIES LAMMAS PROFILES ACCESSORIES DRAWING NOTE BASIC VS1 LAMMAS PROFILE COD. 006310801 BASIC VS1 LAMMAS PROFILE FOR LIGHT LINE. BASIC VS2 LAMMAS PROFILE COD. 006316681 SPECIFIC GRAVITY: 10,9 Kg/m BASIC VS2 LAMMAS PROFILE FOR LIGHT LINE. SPECIFIC GRAVITY: 10,5 Kg/m COVER LINE MODULES VS1 COD. 006316650 800 VS1 COVER FOR VS1 LINE MODULES. SPECIFIC GRAVITY: Kg/m EXTERNAL COVER VS2 COD. 006316701 EXTERNAL COVER FOR VS2 LINE MODULES. SPECIFIC GRAVITY: 1 Kg/m INTERNAL COVER VS2 COD. 006316691 INTERNAL COVER FOR VS2 LINE MODULES. SPECIFIC GRAVITY: 0,75 Kg/m 64 CHAPTER 16

SISTEMAS ACCESSORIES LAMMAS PROFILES ACCESSORIES DRAWING NOTE INTERNAL COVER VS2 COD. 770201289 FOR ROLLER CHAIN COD. 770201264 FOR FLAT LINK 60X80 PROFILE COD. 006310651 GALVANIZED STEEL INTERNAL COVER FOR VS2 LINE MODULES. NOTE: AVAILABLE IN METERS 60X80 PROFILE CAP COD. 770201239 SPECIFIC GRAVITY: 5,2 Kg/m LEG PROFILE COD. 006310431 LEG PROFILE CAP COD. 770144075 SPECIFIC GRAVITY: 2,5 Kg/m 45X45 PROFILE COD. 006316621 45X45 PROFILE CAP COD.770144099 SPECIFIC GRAVITY: 1,65 Kg/m 120X80 LIGHT PROFILE COD. 006310371 120X80 PROFILE CAP Cod. 770201244 SPECIFIC GRAVITY: 7,71 Kg/m 65 CHAPTER 16

SISTEMAS ACCESSORIES LAMMAS PROFILES ACCESSORIES DRAWING NOTE 200X100 PROFILE COD. 006310391 IT IS STRONG LAMMAS PROFILE. SPECIFIC GRAVITY: 12,3 Kg/m 66 CHAPTER 16

SISTEMAS VS1 CHAINS VS1 5/8 CHAIN FOR VS1 LINE P PITCH = 5/8 15,875 mm M LINK = 31,75 mm DOUBLE IDLE CHAIN (DDR) Cod. 006 370 075 DOUBLE SILENT CHAIN (DSP) Cod. 006 370 080 67 CHAPTER 16

SISTEMAS VS2 CHAINS VS2 3/4 CHAIN FOR VS2 LINE P PITCH = 3/4 19,05 mm M LINK = 38,1 mm TRIPLE CHAIN WITH CENTRAL ROLLER (FLR) Cod. 006 370 025 CENTRAL ROLLER TRIPLE CHAIN WITH CENTRAL ROLLER + PLASTIC INSERT (FIP) Cod. 006 370 025-IP PLASTIC INSERT TRIPLE CHAIN WITH FLAT LINK (FMP) Cod. 006 370 046 FLAT LINK 68 CHAPTER 16

FOR CAD FILES ASK TO www.lammas.it SISTEMAS VS REPRODUCTION (EVEN IF PARTIAL) OF THIS TECHNICAL CATALOG IT IS FORBIDDEN. IT IS NOT ACCEPTED ANY RESPONSABILITY FOR ERRORS OR OMISSIONS. LAMMAS s.r.l. Strada Castellamonte-Bairo 1/A 10010 Bairo (TO) Italy. Tel: +390124501266 Fax: +390124501047 Email: ufcomm@lammas.it Website: www.lammas.it