ACO ShowerDrain Technical information

ACO ShowerDrain Impress your customers with elegant designed bathroom drainage solutions ACO supplies you with sophisticated solutions from the world s leading drainage brand. The ACO ShowerDrain product line satisfies the demands of many house builders and architects for generous and homogenous bathroom design, with no thresholds, changes of materials and no barriers. The classic models for this trend come from the traditional bathing culture in the orient, as well as modern luxury spas. ACO quality and functionality puts you on the safe side The high quality of the components is not limited to the design, materials and the finishing, aspects which have at least the same high priority as handling and installation safety at the building site. With low and flexible installation heights, and reliable seals, ACO ShowerDrain has a solution for every application. The difference is in the details For house builders thinking in the long term, the ACO ShowerDrain is a decision for prudent luxury where all the details can be relied on. The extremely smooth surfaces guarantee safe drainage and hygiene in bathrooms. The seals, joints and thickness of the materials are the guarantors for low noise emissions. The ACO ShowerDrain satisfies the latest fire protection regulations for multi-storey buildings. A real beauty: Our award-winning design The gratings and covers in stainless steel visibly demonstrate the top quality of the ACO ShowerDrain each and every day. As you can see: ACO ShowerDrain gives you any number of opportunities of impressing your customers through quality and looks! The curved ACO ShowerDrain design was granted the if product design award 2009 and the red dot design award 2009 Contents 2 ACO ShowerDrain general information Planning information 04 Quick finder 08 ACO ShowerDrain E design without limits 10 The linear solution with thin-bed flange (with or without vertical flanges) 12 Stainless steel design gratings/glass and mineral gratings 14 Showerboard 16 Customised solutions 18 The curved solution 20 The corner solution 22 Lightline illumination for shower channels 24 The Walk-in solution 27 ACO ShowerDrain C functional design 34 The linear solution with horizontal flange 36 The linear solution with horizontal and vertical flange 38 The linear solution without flange 40 The linear solution without foul air trap 42 ACO ShowerDrain F flexible installation 44 Two part solution 48 ACO ShowerDrain point drainage Easyflow solutions 54 Wal-Selecta gully bodies 62 EG 150 stainless steel gullies 64 FG pure stainless steel gullies 70

ACO ShowerDrain ACO ShowerDrain planning information One of the most important decisions taken for threshold-free shower areas is how to design the drainage. Not only from an aesthetical point of view, but also technically, the solution must fit the bathroom layout with possible slope directions as well as it must fit the tile materials used. The ACO ShowerDrain product range offers both the more traditional point drainage solution (gullies), where slope from all sides is needed, as well as line drainage solution (channels), where the slope only has to be one directional. Especially with luxurious large dimensioned tiles and marble materials the ACO ShowerDrain channels are the ultimate solutions. Installation Line drainage Point drainage Installation in front of the wall Installation at the entrance Installation in the middle simplest slope solution in one direction slope away from the bathroom no risk of overshooting water use of wall flange is recommended (see waterproofing on page 5) s lope in one direction, towards the bathroom overshooting water/foam may enter the bathroom slope of bathroom floor towards showerarea is recommended channel length should exactly fit the wall-wall opening can be placed against/under shower door s lope in 4 directions is needed complicated cutting of tiles Walk-in: Installation in front of the wall Walk-in: Installation with two channels Walk-in: Installation in the middle slope in one direction only shower area is sloped, or whole bathroom floor can be sloped use of wall flange is recommended (see waterproofing on page 5) two directional slope towards the bathroom overshooting water/foam may enter bathroom slope of bathroom floor towards showerarea is recommended channel length should exactly fit the width of the shower area s lope in 4 directions is needed complicated cutting of tiles 4

ACO ShowerDrain Line drainage Point drainage Walk-in: Installation in front of the wall Walk-in: Installation at the entrance Walk-in: Installation in the middle simplest slope solution in one direction slope away from the bathroom no risk of overshooting water use of wall flange is recommended (see waterproofing on page 5) s lope in one direction, towards the entrance overshooting water/foam may enter the entrance slope of bathroom floor towards shower area is recommended channel length should exactly fit the width of the opening s lope in four directions needed complicated cutting of files Flow rates for shower drains The choice of shower drains generally depends on the connected values of the shower fittings. A typical average value for this is 0.15 l/s, and 70 % of the shower heads have a maximum capacity of less than 0.3 l/s. This means that a shower drain with this flow-rate can be combined with most of the shower heads available on the market. Unlike this average value, the standard ACO ShowerDrain channel has a minimum flow-rate of 0.4 l/s and can therefore be used to drain off the water produced by even higher capacity shower heads. EN 1253-1 defines minimum flow-rates for floor drains. The value for DN 50 floor drains is 0.8 l/s. This figure has to be achieved with accumulation of 20 mm above the grating (see figure below). 20 mm accumulation levels can usually be easily achieved with floor drains because the floor slopes in from four sides to the drain. In this brochure you will find three flow rates for each product, of which one is according to EN 1253 and the other two are the recommended practical flow rates depending on the application. The flow rates for shower channels at the entrance are lower because no overshooting of water can be allowed. EN 1253 Wall Entrance Type of installation 20 mm 5 Flow rate Q l/s Flow rate test according to EN 1253-1 Not recommended Installation against the wall (5 mm build-up) Recommended Installation at the entrance (without overshooting) Recommended 5

ACO ShowerDrain Water-proofing for shower channels 1. Channels without flange Seepage water may penetrate through the tile joints. Normally, concrete slab is water-tight and the penetrated water will evaporate. With non-water-resistant slabs such as wood, this method is not applicable. Channels with flange and waterproofing shall be used in this case. Available for ShowerDrain C Evaporation Tiles Tile glue Concrete 2. Channels with flange without seepage drainage Seepage water may penetrate through the tile joints and is retained between the thin-bed sealing and the tiles. The penetrated water will evaporate. Available for ShowerDrain E and ShowerDrain C Evaporation Tiles Tile glue Water proofing Concrete 3. Channels with flange and seepage drainage Seepage water is drained via the thin-bed sealing into the channel body. Available for ShowerDrain F Tiles Tile glue Water proofing Concrete 4. Channels with wall flange (vertical flanges) Shower channels with wall flanges provide an additional protection against leaking problems in the very sensitive wall and floor joints. Available for ShowerDrain E and ShowerDrain C Evaporation Tiles Tile glue Water proofing Concrete Noise transfer The ACO ShowerDrain has been tested pursuant to DIN 4109 and SIA 181 to determine its enhanced noise transfer levels. Tests were carried out by the Fraunhofer Institute IBP which is ac- credited by DAP pursuant to EN ISO/ICE 17025. The impact sound noise level (water hitting the floor plate) was measured at 27 db(a). DIN 4109 and VDI 4100 specify 30 db(a), which means that the ShowerDrain product line easily satisfies the standard criteria. The shower drains even comply with noise protection level II for apartments in apartment blocks pursuant to VDI regulation 4100. 6

ACO ShowerDrain 7

ACO ShowerDrain ACO ShowerDrain quick finder Design criteria Installation criteria Shape Electro polished gratings Glass/mineral gratings Brushed grating Blasted gratings LED light available Width of channel/ Dimension of grating Construction height [mm] Foul air trap [mm] Flange* Suitable for vinyl floor Showerboard available Page Straight x x x 84 105 50 H, V x Straight 12 Straight x x x 84 79 25 H, V x Straight 12 ACO ShowerDrain E Curved x x 84 105 50 H, V Curved 20 Corner x x 84 105 50 H, V Corner 22 Straight x x 70 93 50 N, H, V Straight ACO ShowerDrain C Straight x 70 65 30 Straight Straight x 100 87 50 N Straight ACO ShowerDrain F Straight x 100 67 30 Straight 34 46 Page x x 150 50 H x x 150 30 H x ACO ShowerDrain Easyflow 58 x 150 50 H ACO ShowerDrain Wal-Selecta 62 x 150 50 x 150 50 ACO ShowerDrain EG 150 64 x 100 50 x 150 50 ACO ShowerDrain FG 70 x 100 50 *H = Standard flange, V = Vertical flange; N = no flange 8

ACO ShowerDrain 9

ACO ShowerDrain E ACO ShowerDrain E design without limits ACO ShowerDrain solutions can and are to inspire a creative bath room planning. Above all, however, they can be adapted to every desired design. This is the reason why our range offers four different solutions: classic linear solution extravagant curved solution sophisticated corner solution walk-in solution Moreover, the planning and design concept allows a combination of various designs and thus a further customisation in larger bathrooms or alike. Naturally, the gratings and covers can lateron be replaced by another design. The ACO quality brand stands for continuity, compatibility and availability of these ranges. Linear solution The ACO ShowerDrain E shower channel with straight design grating Page 12 Curved solution The ACO ShowerDrain E shower channel with curved design grating Page 20 Corner solution The ACO ShowerDrain E shower channel with corner design grating Page 22 Lightline The ACO ShowerDrain E shower channel is available optionally with illumination for straight, curved and corner designs Page 24 Walk-in solution Nobel grating of waterproof, oiled hardwood with stainless steel tray optionally with or without drain Page 26

ACO ShowerDrain E ACO quality The ACO ShowerDrain individual components are firmly welded with each other. Therefore, leakages cannot develop, neither by extreme stress nor by wear. Flexible grating design The range of grating designs enables the appearance of the room to be changed at a later date by simply replacing the gratings. The illuminated Lightline version can also be retrofitted to create very interesting colour and lighting effects. Electro-polished surface All the shower channels ACO ShowerDrain E and the matching gratings are electro-polished. Electro-polishing involves a physical process to gently create a surface with a high gloss finish. Polishing creates a shiny pore-free surface which reduces cleaning and maintenance to a minimum: water and soap residues can be easily removed from the grating and the channel surfaces. The ground appearance of the channel is still structurally visible even after electro-polishing and provides long-term protection of the shiny appearance. Large cleaning section After removing the dual-body odour seal, the entire pipe section is available. For this reason, a cleaning spiral can be inserted without problems in the case of pipe blockage. To clean the ACO ShowerDrain drain, first take off the design grating with a lifting aid The dual-body odour seal is removable and enables direct access to the outlet pipe The functional drain can be cleaned rapidly and without problems 11

ACO ShowerDrain E The linear solution with thin-bed flange Article description drainage channel DN 50 for the shower area, suitable for all push-fit pipe socket systems installation height: 105 160 mm (50 mm FAT) or 79 134 mm (25 mm FAT) full stainless steel channel tested according to DIN EN 1253: flow rate 0.8 l/s, flow rate at entrance of shower: 0.4 l/s, flow rate against the wall: 0.6 l/s channel width: 84 mm channel body with lateral slope removable dual-body odour seal of stainless steel electro-polished surface surrounding, integral thin bed flange with wall flange, optional with vertical flange design ACO ShowerDrain with wall flange for an absolutely safe sealing in the case of wall installation Product advantages full welded stainless steel body, no risk of leakage electro-polished body and gratings for great looks and easy cleaning wide range of gratings including stainless steel, glass and mineral materials levelling feet for easy installation flanges optionally with vertical design for safe sealing in the case of wall installation illumination system available (refer to page 24) F L1 F 84 15 40 30 F H H = 105 up to 160 mm with odour seal height 50 mm H = 79 up to 134 mm with odour seal height 25 mm The dimensional drawing exemplifies vertical flanges on rear and rightside Installation dimensions L1 (mm) 700 800 900 1000 1200 Type of flange F Horizontal 30 Vertical 20 12

ACO ShowerDrain E Available design gratings on pages 14 and 15 Example of wall flange on all three sides Order data Channels with wall flange (excluding gratings) Length L1 (mm) Art. no. odour seal = 25 mm Art. no. odour seal = 50 mm Type of vertical flange 700 0153.76.44 0153.73.36 800 0153.76.45 0153.73.38 900 0153.76.46 0153.73.39 1000 0153.76.47 0153.73.40 1200 0153.76.48 0153.73.41 700 9010.55.53 9010.55.18 none 800 9010.55.54 9010.55.19 900 9010.55.55 9010.55.20 1000 9010.55.56 9010.55.21 1200 9010.55.57 9010.55.22 700 9010.55.58 9010.55.23 right-hand 800 9010.55.59 9010.55.24 900 9010.55.60 9010.55.25 1000 9010.55.61 9010.55.26 1200 9010.55.62 9010.55.27 700 9010.55.63 9010.55.28 left-hand 800 9010.55.64 9010.55.29 900 9010.55.65 9010.55.30 1000 9010.55.66 9010.55.31 1200 9010.55.67 9010.55.32 700 9010.55.68 9010.55.33 left-hand and right-hand 800 9010.55.69 9010.55.34 900 9010.55.70 9010.55.35 1000 9010.55.71 9010.55.36 1200 9010.55.72 9010.55.37 700 9010.55.73 9010.55.38 rear 30 800 9010.55.74 9010.55.39 900 9010.55.75 9010.55.40 1000 9010.55.76 9010.55.41 1200 9010.55.77 9010.55.42 700 9010.55.78 9010.55.43 rear and left-hand L2 L1 800 9010.55.79 9010.55.44 900 9010.55.80 9010.55.45 1000 9010.55.81 9010.55.46 1200 9010.55.82 9010.55.47 700 9010.55.83 9010.55.48 rear and right-hand 30 30 20 800 9010.55.84 9010.55.49 900 9010.55.85 9010.55.50 1000 9010.55.86 9010.55.51 1200 9010.55.87 9010.55.52 rear, left-hand and right-hand 13 30 30 20 20

ACO ShowerDrain E Stainless steel design gratings for the linear design Order data Stainless steel design gratings Design Length (mm) Art. no. Wave Quadrato Flag Curl Chain Hawaii Mix Pixel Tile (tileable, 10 mm) 700 0153.73.42 800 0153.73.43 900 0153.73.44 1000 0153.73.45 1200 0153.73.46 700 0153.73.59 800 0153.73.60 900 0153.73.61 1000 0153.73.62 1200 0153.73.63 700 0153.73.69 800 0153.73.70 900 0153.73.71 1000 0153.73.72 1200 0153.73.73 700 9010.55.88 800 9010.55.89 900 9010.55.90 1000 9010.55.91 1200 9010.55.92 700 9010.55.93 800 9010.55.94 900 9010.55.95 1000 9010.55.96 1200 9010.55.97 700 9010.55.98 800 9010.55.99 900 9010.56.00 1000 9010.56.01 1200 9010.56.02 700 9010.56.03 800 9010.56.04 900 9010.56.05 1000 9010.56.06 1200 9010.56.07 700 9010.56.08 800 9010.56.09 900 9010.56.10 1000 9010.56.11 1200 9010.56.12 700 0153.81.87 800 0153.81.88 900 0153.81.89 1000 0153.81.90 1200 0153.81.91

ACO ShowerDrain E Glass and mineral gratings for the linear design Glass grating with circumferential slot Order data Glass and mineral gratings Length (mm) Art. no. Design Length (mm) Art. no. Design 700 9010.56.67 700 9010.57.12 800 9010.56.68 900 9010.56.69 1000 9010.56.70 1200 9010.56.71 700 9010.56.72 Glass, black 800 9010.57.13 900 9010.57.14 1000 9010.57.15 1200 9010.57.16 700 9010.57.17 Glas, black with floral sand blasting 800 9010.56.73 900 9010.56.74 1000 9010.56.75 1200 9010.56.76 700 9010.56.77 Glass, white 800 9010.57.18 900 9010.57.19 1000 9010.57.20 1200 9010.57.21 700 9010.57.22 Glass, white with floral design in black 800 9010.56.78 900 9010.56.79 1000 9010.56.80 1200 9010.56.81 700 9010.56.82 Glass, grey 800 9010.57.23 900 9010.57.24 1000 9010.57.25 1200 9010.57.26 700 9010.57.27 Glass, chrome with floral design in black 800 9010.56.83 900 9010.56.84 1000 9010.56.85 1200 9010.56.86 700 9010.56.87 Glass, brown 800 9010.57.28 900 9010.57.29 1000 9010.57.30 1200 9010.57.31 700 9010.57.37 Glass, Wengé design 800 9010.56.88 900 9010.56.89 1000 9010.56.90 1200 9010.56.91 700 9010.56.92 Glass, chrome 800 9010.57.38 900 9010.57.39 1000 9010.57.40 1200 9010.57.41 700 9010.57.42 Mineral, white 800 9010.56.93 900 9010.56.94 1000 9010.56.95 1200 9010.56.96 700 9010.56.97 Glass, black with white stripes 800 9010.57.43 900 9010.57.44 1000 9010.57.45 1200 9010.57.46 700 9010.57.47 Mineral, beige 800 9010.56.98 900 9010.56.99 1000 9010.57.00 1200 9010.57.01 700 9010.57.02 Glass, white with black stripes 800 9010.57.48 900 9010.57.49 1000 9010.57.50 1200 9010.57.51 700 9010.57.52 Mineral, grey 800 9010.57.03 900 9010.57.04 1000 9010.57.05 1200 9010.57.06 700 9010.57.07 Glass, grey with white stripes 800 9010.57.53 900 9010.57.54 1000 9010.57.55 1200 9010.57.56 Mineral, black 800 9010.57.08 900 9010.57.09 1000 9010.57.10 1200 9010.57.11 Glass, white with grey stripes 15

ACO ShowerDrain E Showerboard Article description ready-to-install shower floor of rigid foam with integrated full stainless steel shower channel coated with water-impermeable fleece ready-to-tile fleece overlapping (70 mm) for the safe sealing of transitions at floor and wall board can be cut to length accessible with wheel chair load as from tile size: 50 x 50 mm pre-shaped slope of 2 % to integrated shower channel DN 50 suitable for all push-fit pipe socket systems outflow capacity: as from 0.4 l/s consisting of showerboard and 3 substructure elements (heights: 20, 30 and 40 mm) for channel embedding b Product advantages integrated slope, ready for tiling water-proof fleece for easy thin-bed connection can take wheel-chair loads illumination system available wide range of stainless steel gratings a Installation dimensions a x b (mm) Channel length 800 x 1200 700 900 x 1200 800 1000 x 1200 900 1200 x 1200 1100 Z 100 15 H T Fleece projection Vliesüberstand surrounding umlaufend 70 70 mm mm Height dimensions depending on several cutting lengthes 16 Z (cutting length) H 1) H 2) H 3) 1100 105 115 135 1000 103 113 133 900 101 111 131 800 99 109 129 700 97 107 127 600 95 105 125 500 93 103 123 The showerboard can be cut to length and can thus be adjusted to the individual conditions 1) = when using the substructure elements with 20 and 40 mm height, T = 85 2) = when using the substructure elements with 30 and 40 mm height, T = 95 3) = when using the substructure elements with 20, 30 and 40 mm height, T = 115

ACO ShowerDrain E Showerboard with water-tight fleece (ready-to- tile, slope 2 %) Substructure element Channel is integrated into the board With the help of the substructure element, the channel drain can be safely connected to the pipe without problems.the space for the pipe can be cut out easily in any direction The fleece is already water-tight and can be provided directly with tile adhesive and be tiled The fleece projecting the board serves as connection option of thin bed sealing to adjoining side walls/at floor Order data Showerboard Dimensions (mm) Art. no. Design 800 x 1200 620410 900 x 1200 620417 1000 x 1200 620424 1200 x 1200 620431 Wave 800 x 1200 620413 900 x 1200 620420 1000 x 1200 620427 1200 x 1200 620434 Quadrato 800 x 1200 620415 900 x 1200 620422 1000 x 1200 620429 1200 x 1200 620436 Flag 800 x 1200 620455 900 x 1200 620456 1000 x 1200 620457 1200 x 1200 620458 Curl 800 x 1200 620459 900 x 1200 620460 1000 x 1200 620461 1200 x 1200 620462 Chain 800 x 1200 620463 900 x 1200 620464 1000 x 1200 620465 1200 x 1200 620466 Hawaii 800 x 1200 620467 900 x 1200 620468 1000 x 1200 620469 1200 x 1200 620470 Mix 800 x 1200 620471 900 x 1200 620472 1000 x 1200 620473 1200 x 1200 620474 Pixel 800 x 1200 620416 900 x 1200 620423 1000 x 1200 620430 1200 x 1200 620437 Tile (tileable, 10 mm)

ACO ShowerDrain E Customised solutions individual configuration With the help of this individual configuration, customised channels can be planned in six steps. The data sheet can be downloaded from our homepage. www.aco-haustechnik.de/ showerchannelspecial For tender preparation, you may copy the two-page configuration, fill in and fax to following fax number: ACO Haustechnik Projektierung Duschrinnen Fax +49 (0) 36965 819-361 Name: Company: Road: City: Tel.: Fax: Email: 1. Dimensions of ACO ShowerDrain in field vision (L x W) Please fill in: L Total length L =... mm (Standard width = 84 mm) 84 Please observe: The total length and total width incl. thin bed flange is L + 60 mm or W + 60 mm 2. Height of tile frame (H) Please check: Oberfläche Surface besandet sand-blasted 30 Tile (standard height = 15 mm) H Natural stone... mm frame height (max. 30 mm) 3. Vertical flange Please check: right-hand rear and left-hand left-hand rear and right-hand rightand left-hand rear, rightand left-hand 18 rear No vertical flange L2 L1

ACO ShowerDrain E 4. Number and position of drain bodies DN 50 Please fill in: One drain body L1 L2 L1 =... mm L2 =... mm Two drain bodies Three drain bodies L1 L2 L3 L1 L2 L3 L4 L1 =... mm L2 =... mm L3 =... mm L1 =... mm L2 =... mm L3 =... mm L4 =... mm 5. Inclination of drain body/bodies Please check: Vertical drain body (90 inclination) Lateral drain body (1.5 inclination) with minimum total height 79 mm odour seal height = 25 mm Lateral drain body (1.5 inclination) with minimum total height 105 mm odour seal height = 50 mm 6. Selecting the design grating (Gratings in customised lengths are only available as stainless steel gratings) Please check: Wave Hawaii Quadrato Mix Flag Curl Pixel Tile (tileable, 10 mm) Chain 19

ACO ShowerDrain E The curved solution Article description drainage channel DN 50 as curved solution for the shower area Installation height: 105 160 mm full stainless steel channel standard design outflow capacity: 0.6 l/s without accumulation channel width: 84 mm outside radius: 540 mm leg length 550 mm incl. design grating 3 drains DN 50 suitable for all push-fit pipe socket systems removable dual-body odour seal inclination: 1.5 electro-polished surface surrounding, integral thin bed flange with wall lip at both front sides Product advantages full welded stainless steel body, no risk of leakage electro-polished body and gratings for great looks and easy cleaning levelling feet for easy installation illumination system available (refer to page 24) 42 105 160 mm 20

ACO ShowerDrain E Order data Curved solution channel Length Art. no. 1090 x 1090 9010.58.45 The curved ACO ShowerDrain design was granted the if product design award 2009 and the red dot design award 2009 Order data Stainless steel design gratings (Leg length 550 mm) Art. no. Design 154.21.41 84 144 Quadrato 550 R 540 154.21.39 Flag 1090 0154.54.96 550 Curl 0154.54.97 1090 Hawaii One of both legs can be manufactured with a length deviating from the standard dimension of 550 mm 0154.54.98 Pixel 0154.21.42 Tile (tileable, 10 mm)

ACO ShowerDrain E The corner solution Article description drainage channel DN 50 as corner solution for the shower area, suitable for all push-fit socket systems installation height: 105 160 mm full stainless steel channel standard design outflow capacity: 0.4 l/s channel width: 84 mm leg length: 400 mm drain DN 50 suitable for all push-fit pipe socket systems channel body with lateral slope removable dual-body odour seal of stainless steel inclination: 1.5 electro-polished surface surrounding, integral thin bed flange with wall lip at both legs Product advantages full welded stainless steel body, no risk of leakage electro-polished body and gratings for great looks and easy cleaning levelling feet for easy installation illumination system available (refer to page 24) wide range of stainless steel gratings 105 160 mm 40 449 398 449 398 DN 50 82 133 42 22

ACO ShowerDrain E Order data Corner solution channel Length Art. no. 398 x 398 0153.97.29 Flanges (Vertical flange) At both exteriors, the shower channel possesses a thin bed flange with wall lips. These enable a perfect connection of channel to the walls by relevant alternative sealings. The inner surfaces, too, possess a thin bed flange to make sure that sealing can be carried out over the floor screed. Order data Corner solution design gratings Art. no. Design 0153.97.07 Wave 0153.97.02 Quadrato 0153.97.03 Insulation (option) Thin bed flange with wall flange Flag Thin bed sealing 9010.56.18 Floor tile Tile adhesive Thin bed sealing Thin bed flange Flexible joint Wall tile Tile adhesive 9010.56.19 Curl Floor screed Grating Chain 9010.56.20 Channel body Hawaii 9010.56.21 Mix Detail of wall flange (vertical flange for wall sealing) 9010.56.22 Pixel 0153.97.28 Tile (tileable, 10 mm)

ACO ShowerDrain Lightline illumination for shower channels Article description illumination kit for ACO ShowerDrain shower channels suitable for stainless steel design gratings, not suitable for glass and mineral gratings will light automatically when in contact with water consisting of: 2 rechargeable LED modules and 1 recharger low voltage LED module suitable for underwater use available only for ShowerDrain E solutions Blue Red 24 Green Rainbow

ACO ShowerDrain E Illumination kit Order data Illumination kit (2 LED modules and recharger) Design Blue Red Green Rainbow Art. no. 9010.89.01 9010.89.02 9010.89.03 9010.89.08 Illumination is possible for the straight, curved and corner ACO ShowerDrain shower channels. Following colours can be chosen: Blue, Red, Green or Rainbow. Function of illumination is very easy: As soon as sufficient water has accumulated in the channel, the circuit connects to the contacts of the LED modules and the LEDs start glowing. After a delay of several minutes, the illumination switches off if no more water is entering the channel. LED modules Considering a daily showering period of 15 minutes, the batteries must be recharged after approx. three months. Order data LED battery module (1 LED module) Design Blue Red Green Rainbow Art. no. 9010.89.05 9010.89.06 9010.89.07 9010.89.09 Place LED modules ready for installation Remove the grating with the lifting aid Insert LED modules and fix with the help of supplied plastic pins, then re-insert the grating 25

26 ACO ShowerDrain E

ACO ShowerDrain E The Walk-in solution applications When leaving the shower area after taking a shower, often leaves a trace of water. This can lead to dangerous situations on slippery bathroom floors, even hours after the use of the shower. The use of towels or anti-slip grates to stand on, or a bath mat is not always comfortable since these get wet as well and form obstacles on the bathroom floor. ACO introduces a new solution for this application, the ACO ShowerDrain Walk-in. For safety, comfort and aesthetics, the Walk-in is fitted with a wooden grating. The ACO Walk-in solution consists basically of two components: a wooden grating and a stainless steel tray with integrated PUR substructure element. Optionally the tray is available with a drain connection which allows the usage of the tray as a fully-fledged drainage point. In addition, the version with drain can be equipped with a combination of a glass/mineral grating and a wooden grating with reduced dimensions. The applications for Walk-in solutions without drain are shower areas with drainage inside the shower and sauna facilities. The Walk-in solutions with drainage connection can be installed in all areas where shower water has to be drained or little water has to be retained and drained. Walk-in: without drain Shower drainage: with bath gully Walk-in: without drain Shower drainage: with shower channel Drainage of the shower water is accomplished inside the shower area via a central installed gully. A four-directional slope is needed reached by complicated cutting of tiles. The Walk-in tray is only for retaining the droplets and water splashes which will dry out after a short time Walk-in: Installation in front of the wall Drainage of the shower water is accomplished inside the shower area via a shower channel that is installed against the back wall. Slope is needed in one direction. The Walk-in tray is only for retaining the droplets and water splashes which will dry out after a short time Walk-in: Modular system Easyflow Drainage of the shower water is accomplished at the entrance of the shower area via shower channel that is integrated in the Walk-in tray. Slope is needed in one direction. The drain of the Walk-in tray is connected to a gully body. The entance has the same width as the Walk in tray The Walk-in solution with drain can be connected without further accessories directly to all Easyflow gullies. If a Variant-CR DN 70 or a Wal- Selecta DN 50 gully shall be used, the extension element 2040.00.00 has to be placed between the Walk-in tray and the gully body 27

ACO ShowerDrain E The Walk-in solution without drain socket Article description Walk-in without drain socket drainage tray for the access to the shower area stainless steel tray with wooden grating of waterproof and oiled hard wood (mesh width 13 mm) load class K 3 for acceptance of dripping water with surrounding connecting rim for thin bed sealing bottom side of PUR foam for local insertion in floor structure Order data Walk-in without drain (incl. wooden grating) L1 (mm) L2 (mm) Art. no. 700 760 9010.56.23 800 860 9010.56.24 900 960 9010.56.25 1000 1060 9010.56.26 1200 1260 9010.56.27 Product advantages prevents wet and slippery bathroom floor no obstacles on bathroom floor like towels or anti-slip grates full stainless steel body, no risk of leakage Walk-in without drain with wooden grating 500 560 61 15 PUR-Schaum foam 28 L1 L2

ACO ShowerDrain E The Walk-in solution with drain socket Article description Walk-in with drain socket drainage tray for the access to the shower area stainless steel tray drain socket for connection of a plastic drain body DN 50 or Wal-Selecta DN 50 drain body with surrounding connecting rim for thin bed sealing bottom side of PUR foam for local insertion in floor structure flow rate: 0.8 l/s (depends on selected gully) Order data Walk-in with drain (without covers) L1 (mm) L2 (mm) Art. no. 700 760 9010.56.28 800 860 9010.56.29 900 960 9010.56.30 1000 1060 9010.56.31 1200 1260 9010.56.32 500 560 15 Product advantages can be combined with shower drainage prevents wet and slippery bathroom floor no obstacles on bathroom floor like towels or anti-slip grates full stainless steel body, no risk of leakage optionally with integrated glass or mineral gratings 61 PUR-Schaum foam Ø125 Ø135 Drains Drain body for connection to the Walk-in solution with drain socket are depicted on following pages: ACO Easyflow plastic drain body on page 58 ACO Wal-Selecta cast iron drain body on page 62 *only to use with extension 2040.00.00 (p. 59) L1 L2 Covers Walk-in covers are depicted on page 30 Walk-in with wooden grating Walk-in with shortened wooden grating and cover 29

ACO ShowerDrain E Order data Wooden gratings for Walk-in with drain socket Description Dimensions (mm) Art. no. Wooden grating (waterproof, oiled hard wood) for complete coverage. Mesh width 13 mm, load class K 3 Wooden grating (waterproof, oiled hard wood) for partial coverage. Mesh width 13 mm, load class K 3 700 x 500 9010.56.33 800 x 500 9010.56.34 900 x 500 9010.56.35 1000 x 500 9010.56.36 1200 x 500 9010.56.37 700 x 410 9010.56.38 800 x 410 9010.56.39 900 x 410 9010.56.40 1000 x 410 9010.56.41 1200 x 410 9010.56.42 Order data Covers for Walk-in with drain socket This wooden grating must always be used in combination with one of the covers shown below! These covers must always be used in combination with the wooden lattice grating for partial coverage shown above! Length (mm) Art. no. Design Length (mm) Art. no. Design 700 9010.56.43 700 9010.56.52 800 9010.57.58 900 9010.57.59 1000 9010.57.60 1200 9010.57.61 700 9010.56.44 Glass, black 800 9010.57.94 900 9010.57.95 1000 9010.57.96 1200 9010.57.97 700 9010.56.53 Glass, black with floral sand blasting 800 9010.57.62 900 9010.57.63 1000 9010.57.64 1200 9010.57.65 700 9010.56.45 Glass, white 800 9010.57.98 900 9010.57.99 1000 9010.58.00 1200 9010.58.01 700 9010.56.54 Glass, white with floral design in black 800 9010.57.66 900 9010.57.67 1000 9010.57.68 1200 9010.57.69 700 9010.56.46 Glass, grey 800 9010.58.02 900 9010.58.03 1000 9010.58.04 1200 9010.58.05 700 9010.56.55 Glass, chrome with floral design in black 800 9010.57.70 900 9010.57.71 1000 9010.57.72 1200 9010.57.73 700 9010.56.47 Glass, brown 800 9010.58.06 900 9010.58.07 1000 9010.58.08 1200 9010.58.09 700 9010.56.57 Glass, Wengé design 800 9010.57.74 900 9010.57.75 1000 9010.57.76 1200 9010.57.77 700 9010.56.48 Glass, chrome 800 9010.58.14 900 9010.58.15 1000 9010.58.16 1200 9010.58.17 700 9010.56.65 Mineral, white 800 9010.57.78 900 9010.57.79 1000 9010.57.80 1200 9010.57.81 700 9010.56.49 Glass, black with white stripes 800 9010.58.18 900 9010.58.19 1000 9010.58.20 1200 9010.58.21 700 9010.56.66 Mineral, beige 800 9010.57.82 900 9010.57.83 1000 9010.57.84 1200 9010.57.85 700 9010.56.50 Glas, white with black stripes 800 9010.58.22 900 9010.58.23 1000 9010.58.24 1200 9010.58.25 700 9010.57.57 Mineral, grey 800 9010.57.86 900 9010.57.87 1000 9010.57.88 1200 9010.57.89 700 9010.56.51 Glass, grey with white stripes 800 9010.58.26 900 9010.58.27 1000 9010.58.28 1200 9010.58.29 700 9010.58.30 Mineral, black 30 800 9010.57.90 900 9010.57.91 1000 9010.57.92 1200 9010.57.93 Glass, white with grey stripes 800 9010.58.31 900 9010.58.32 1000 9010.58.33 1200 9010.58.34 Tile (tileable, 10 mm)

ACO ShowerDrain 31

32 ACO ShowerDrain

33 ACO ShowerDrain

ACO ShowerDrain C ACO ShowerDrain C functional design The ShowerDrain C series is characterised by modern design and perfect functionalality. The basic is the high quality stainless steel which is used for the production of the shower channel itself, gully and grating. The foul air trap is made out of polypropylene. The steel parts are pasivated; the gratings are brushed to the silk gloss. From the user s point of view the ACO ShowerDrain C excelled especially by the high flow rate, very low construction height and very easy maintenance. The linear solution with horizontal flange The ACO ShowerDrain C shower channel for sealing without contact to walls Page 36 The linear solution with vertical flange The ACO ShowerDrain C shower channel with vertical flange for rear wall connection Page 38 The linear solution without flange The ACO ShowerDrain C shower channel for installation with sealing under the channel and gully Page 40 The linear solution without foul air trap The ACO ShowerDrain C shower channel for minimum construction height with vertical outlet and without foul air trap Page 42 34

ACO ShowerDrain C Low construction height The standard model of ACO ShowerDrain C 50 mm of water column in the foul air trap) has a construction height only 92 mm. The lowered model (30 mm of water column in the foul air trap) has incredible construction height of only 65 mm. If integrated foul air trap not needed, it is possible to install ACO ShowerDrain C only with the spigot. In this case, the construction height is equal to the height of the channel only 18 mm. These values enable very wide application of ACO ShowerDrain C in the modern new buildings and buildings under reconstruction. Easy maintenance The user s comfort is increased by the efficiency of the foul air trap and its easy cleaning. Syphon (foul air trap) is made out of plastics. The reliable seal is injection-moulded together with the foul air trap. Due to this construction, there is no risk of losing of the sealing, or another malfunction. The foul air trap can be easily removed from the shower channel. It is easy to disassamble it into two separate parts and clean it by hand or in a dish washer. Versions of ACO ShowerDrain C The shower drain is made in width of 70 mm, in seven lengths 585 mm, 685 mm, 785 mm, 885 mm, 985 mm, 1085 mm and 1185 mm. with standard and lowered height with or without vertical or horizontal flange with or without foul air trap The offer consists of five elegant stainless steel grates in version of one or three parts. The three parts grates are specified for the installation under the door. The grates have a perfect surface finishing. They are treated by pasivation and brushed to the silk gloss. All the ShowerDrain C gratings are silk gloss gratings. The silk gloss gives a smooth surface with a semi gloss finish. The ShowerDrain C gratings are therefore easy to maintain as water and soap residues can be easily removed. Gratings in three parts When is the shower channel located at the shower door, the channel has limited access because of the shower door hinge/frame part. For this application, some of the ACO ShowerDrain C can be supplied with a 3-piece grating. This enables installation of the channel under the door, whilst it is still possible to remove (the middle part of) the grating for cleaning. The stainless steel ShowerDrain C gratings have an unique shape in which the middle part of the grating is lower than the edges. This reduces the risk of overshooting of water significantly. 35

ACO ShowerDrain C The linear solution with horizontal flange Article description drainage channel DN 50 for the shower area, suitable for all push-fit pipe socket systems installation height: 92 mm (50 mm FAT) or 65 mm (30 mm FAT) stainless steel channel and grating tested according to DIN EN 1253: flow rate 0.95 l/s, flow rate at entrance of shower: 0.5 l/s, flow rate against the wall: 0.8 l/s channel width: 70 mm channel body with lateral slope removable foul air trap seal of polypropylene brushed silk gloss gratings surrounding, integral thin bed flange Product advantages welded stainless steel body, no risk of leakage low construction height very suitable for renovation easy removed and cleaned foul air trap, full access to the outlet pipe unique profile of gratings reduces overshooting of water (Patent pending) H H = 92 mm with standard FAT (odour seal height 50 mm) H = 65 mm with lower FAT (odour seal height 30 mm) L1 L2 Installation dimensions L1 (mm) 585 685 785 885 985 1085 1185 L2 (mm) 645 745 845 945 1045 1145 1245 156 130 70 198 130 70 Ø50 92 65 Ø50 65 46 13 13 36 Installation with thin bed flange Low installation with thin bed flange

ACO ShowerDrain C Order data Channel with grating Length L1 (mm) 585 685 785 885 985 1085 1185 Height H (mm) Wave Square one part Square three part Grating Water Slot one part Slot three part Tile, height max.: 10 mm 92 404484 404492 404500 406452 403798 403806 408651 65 406954 406275 407694 406283 406204 407701 408672 92 404485 404493 404501 406453 403799 403807 408652 65 406955 406276 407695 406284 406205 407702 408673 92 404486 404494 404502 406454 403800 403808 408653 65 406956 406277 407696 406285 406206 407703 408674 92 404487 404495 404503 406455 403801 403809 408654 65 406957 406278 407697 406286 406207 407704 408675 92 404488 404496 404504 406456 403802 403810 408655 65 406958 406279 407698 406287 406208 407705 408676 92 404489 404497 404505 406457 403803 403811 408656 65 406959 406280 407699 406288 406209 407706 408677 92 404490 404498 404506 406458 403804 403812 408657 65 406960 406281 407700 406289 406210 407707 408678 37

ACO ShowerDrain C The linear solution with vertical flange Article description drainage channel DN 50 for the shower area, suitable for all push-fit pipe socket systems installation height: 92 mm (50 mm FAT) or 65 mm (30 mm FAT) stainless steel channel and grating tested according to DIN EN 1253: flow rate 0.95 l/s, flow rate at entrance of shower: 0.5 l/s, flow rate against the wall: 0.8 l/s channel width: 70 mm channel body with lateral slope removable foul air trap of polypropylene brushed silk gloss gratings surrounding, integral thin bed flange, vertical flange on rear Product advantages welded stainless steel body, no risk of leakage low construction height very suitable for renovation easy removed and cleaned foul air trap, full access to the outlet pipe unique profile of gratings reduces overshooting of water (Patent pending) vertical flange provides additional safety against leakage problems at the sensitive wall-to-floor joint H H = 92 mm with standard FAT (odour seal height 50 mm) H = 65 mm with lower FAT (odour seal height 30 mm) L2 L1 Installation dimensions L1 (mm) 585 685 785 885 985 1085 1185 L2 (mm) 645 745 845 945 1045 1145 1245 13 137 112 67 13 179 112 67 Ø50 92 65 Ø50 65 46 13 20 13 20 38 Installation with vertical flange Low installation with vertical flange

ACO ShowerDrain C Order data Channel with grating Length L1 (mm) 585 685 785 885 985 1085 1185 Height H (mm) Wave Square one part Square three part Grating Water Slot one part Slot three part Tile, height max.: 10 mm 92 407908 407659 407666 407673 407680 407687 408665 65 407715 407722 407729 407736 407743 407750 408686 92 407923 407660 407667 407674 407681 407688 408666 65 407716 407723 407730 407737 407744 407751 408687 92 407915 407661 407668 407675 407682 407689 408667 65 407717 407724 407731 407738 407745 407752 408688 92 407655 407662 407669 407676 407683 407690 408668 65 407718 407725 407732 407739 407746 407753 408689 92 407656 407663 407670 407677 407684 407691 408669 65 407719 407726 407733 407740 407747 407754 408690 92 407657 407664 407671 407678 407685 407692 408670 65 407720 407727 407734 407741 407748 407755 408691 92 407658 407665 407672 407679 407686 407693 408671 65 407721 407728 407735 407742 407749 407756 408692 39

ACO ShowerDrain C The linear solution without flange Article description drainage channel DN 50 for the shower area, suitable for all push-fit pipe socket systems installation height: 92 mm (50 mm FAT) or 65 mm (30 mm FAT) stainless steel channel and grating tested according to DIN EN 1253: flow rate 0.95 l/s, flow rate at entrance of shower: 0.5 l/s, flow rate against the wall: 0.8 l/s channel width: 70 mm channel body with lateral slope removable foul air trap of polypropylene brushed silk gloss gratings Product advantages welded stainless steel body, no risk of leakage low construction height very suitable for renovation easy removed and cleaned foul air trap, full access to the outlet pipe unique profile of gratings reduces overshooting of water (Patent pending) H H = 92 mm with standard FAT (odour seal height 50 mm) H = 65 mm with lower FAT (odour seal height 30 mm) L1 Installation dimensions L1 (mm) 585 685 785 885 985 1085 1185 70 126 70 165 Ø50 87 92 65 Ø50 65 46 Installation without flange Low installation without flange 40

ACO ShowerDrain C Order data Channel with grating Length L1 (mm) 585 685 785 885 985 1085 1185 Height H (mm) Wave Square one part Square three part Grating Water Slot one part Slot three part Tile, height max.: 10 mm 92 406181 404508 404516 406460 402739 403781 408658 65 406173 406468 407708 406299 405751 405743 408679 92 406182 404509 404517 406461 402740 403782 408659 65 406174 406469 407709 406300 405752 405744 408680 92 406183 404510 404518 406462 402741 403783 408660 65 406175 406470 407710 406301 405753 405745 408681 92 406184 404511 404519 406463 402742 403784 408661 65 406176 406471 407711 406302 405754 405746 408682 92 406185 404512 404520 406464 402743 403785 408662 65 406177 406472 407712 406303 405755 405747 408683 92 406186 404513 404521 406465 402744 403786 408663 65 406178 406473 407713 406304 405756 405748 408684 92 406187 404514 404522 406466 402745 403787 408664 65 406179 406474 407714 406305 405757 405749 408685 41

ACO ShowerDrain C The linear solution without foul air trap Article description drainage channel DN 50 for the shower area, suitable for all push-fit pipe socket systems installation height: 18 mm* stainless steel channel and grating tested according to DIN EN 1253: flow rate 1.5 l/s, flow rate at entrance of shower: 0.5 l/s, flow rate against the wall: 1.0 l/s channel width: 70 mm channel body with lateral slope brushed silk gloss gratings surrounding, integral flange is optional Product advantages welded stainless steel body, no risk of leakage low construction height very suitable for renovation full access to the outlet pipe high flow rate unique profile of gratings reduces overshooting of water (Patent pending) 18 L2 L1 Installation dimensions L1 (mm) 585 685 785 885 985 1085 1185 L2 (mm) 645 745 845 945 1045 1145 1245 130 70 13 18 70 78.5 18 78.5 Ø50 Ø50 42 Low installation with flange *Please note: A foul air trap has to be installed somewhere else in the pipe system Low installation without flange

ACO ShowerDrain C Order data Channel with grating Length L1 (mm) 585 685 785 885 985 1085 1185 Flange Wave Square one part Square three part Grating Water Slot one part Slot three part Tile, height max.: 10 mm with 407757 407764 407771 407778 407785 407792 408693 without 407799 407806 407814 407821 407828 407835 408700 with 407758 407765 407772 407779 407786 407793 408694 without 407800 407807 407815 407822 407829 407836 408701 with 407759 407766 407773 407780 407787 407794 408695 without 407801 407808 407816 407823 407830 407837 408702 with 407760 407767 407774 407781 407788 407795 408696 without 407802 407809 407817 407824 407831 407838 408703 with 407761 407768 407775 407782 407789 407796 408697 without 407803 407810 407818 407825 407832 407839 408704 with 407762 407769 407776 407783 407790 407797 408698 without 407804 407812 407819 407826 407833 407840 408705 with 407763 407770 407777 407784 407791 407798 408699 without 407805 407813 407820 407827 407834 407841 408706 43

44 ACO ShowerDrain

45 ACO ShowerDrain

ACO ShowerDrain F ACO ShowerDrain F flexible installation The new ACO ShowerDrain F range consists of two parts. The first part of the shower drain is the gully body with foul air trap. This is equipped with a flange, enabling reliable connection with the waterproof membrane by screwing. The second part is the channel itself and the grate, which is only 8 mm high. The main advantage of the ACO ShowerDrain F range is the channel with the grate of the same height as the tiles. Like that the channel position can be chosen when tiles are already being laid. There is a 10 mm tolerance of the channel vs. the gully in all four directions. The same as ACO ShowerDrain C also the range F has a high flow rate, a very low construction height and easy maintenance. The base is stainless steel, used for production of the shower drain, the gully and the grate. The foul air trap is made from plastics. Stainless steel parts have been finished with pickle passivating; grates have been silk gloss brushed. Two part solution The ACO ShowerDrain F shower channel with low installation height and foul air trap Page 48 46

ACO ShowerDrain F Variability of shower drain location The ACO ShowerDrain F is only 8 mm high. It is the same height as or lower than most standard floor tiles. It is installed together with tiles laying, after floor insulation. That enables a relatively big variability of the shower drain body positioning, i.e. up to 10 mm or maximum 3 in all directions. Due to this fact the complicated measuring and tiles layout counting and consequent tiles cutting are avoided. The final appearance is always perfect. Low construction height The ACO ShowerDrain F construction height in its standard version (50 mm water column in the odour trap) is only 87 mm. The building height of the lowered version (30 mm water column in the odour trap) is the incredible 67 mm. These values enable very wide application of ACO ShowerDrain F in the most modern new buildings and during ambitious reconstructions. Easy maintenance The user s comfort is increased by the efficiency of the foul air trap and its easy cleaning. Syphon (foul air trap) is made out of plastics. The reliable seal is injection-moulded together with the foul air trap. Due to this construction, there is no risk of losing of the sealing, or another malfunction. The foul air trap can be easily removed from the shower channel. It is easy to disassamble it into two separate parts and clean it by hand or in a dish washer. All the ShowerDrain F gratings are silk gloss gratings. The silk gloss gives a smooth surface with a semi gloss finish. The ShowerDrain F gratings are therefore easy to maintain as water and soap residues can be easily removed ACO ShowerDrain F versions The shower drain is made in the width 100 mm in four lengths 685 mm, 785 mm, 885 mm and 985 mm in two versions of gullies: standard height (50 mm FAT) low height (30 mm FAT) The product range has four elegant stainless steel gratings in a one-piece or three-piece version. The three-piece gratings are designed for installation under a door. The gratings have a perfect surface finishing. They are pickled and silk gloss brushed. 47

ACO ShowerDrain F The linear solution without flange Article description two part shower channel system, gully body can be installed separately from channel stainless steel channel, gully and grating gully provided with screwed 3 mm clamping flange for water proofing seal drainage channel with vertical outlet DN 50 for the shower area, suitable for all push-fit pipe socket systems installation height for gully: 79 mm (50 mm FAT) or 54 mm (30 mm FAT) height of channel with grating: 8mm tested according to DIN EN 1253: flow rate 0.95 l/s, flow rate at entrance of shower: 0.4 l/s, flow rate against the wall: 0.75 l/s channel width: 100 mm removable foul air trap of polypropylene silk gloss brushed grates and channel Product advantages welded stainless steel body, no risk of leakage low construction height very suitable for renovation easy removed and cleaned foul air trap, full access to the outlet pipe unique profile of gratings reduces overshooting of water (Patent pending) L1 Installation dimensions L1 (mm) 685 785 885 985 100 80 100 80 8 167 174 Ø50 8 79 47 54 167 216 Ø50 29 Installation without flange Low installation without flange 48

ACO ShowerDrain F Order data Channel with grating Length L1 (mm) Height H (mm) Wave Square one part Square three part Grating Water Slot one part Slot three part 685 8 407842 407846 407849 407853 407857 407861 785 8 407843 407847 407850 407854 407858 407862 885 8 407844 407848 407851 407855 407859 407863 985 8 407845 407907 407852 407856 407860 407864 Order data Gully body Gully body Height H (mm) Length (mm) Width (mm) Art. no. Standard version 79 312 167 407969 Low version 59 312 167 407970 49

ACO ShowerDrain Easyflow the design solution for point drainage The ACO bathroom drains are used in areas where efficient function has to be combined with stylish looks. A choice of round and square design gratings is available. They are all made of high quality electro-polished stainless steel, and come in lockable and non-lockable versions. Lockable gratings can be used in areas open to the public such as wellness facilities and swimming pools. 50

ACO ShowerDrain Easyflow ACO ShowerDrain Easyflow gullies for bath drainage ACO Easyflow bath drains offer a handy modular system: where floor drains can be combined, depending on the individual requirement, with various top sections in angular or round shape optionally with or without thin bed flange. Optimum cleaning option ACO floor drains also satisfy as far as hygiene is concerned. The odour seal can be taken out completely just by turning slightly and pulling afterwards. Then, an optimum pipe cleaning is possible. As the drains do not have any reductions at inlet and outlet, this drain system offers an optimum revision opening. In addition, the drain body is emptied completely by the flush-with-floor arrangement of the drain socket and the flushing out of foreign bodies is made easier. The odour seal can be taken out easily Plastic floor drains Thanks to the modular system, perfectly aligned functional solutions for customised installation situations and application areas can be realised. Floor drains are used in all private wet rooms and offer in connection with relevant sealings a drainage option which is safe and efficient at the same time. ACO plastic floor drains with top sections and stainless steel design gratings 51

ACO ShowerDrain Easyflow Top section for in situ tile covering The new top section is also available with optional surface. The top section is tiled locally with a floor covering, e. g. your tile which is used throughout the entire bathroom. The floor image is thus not discontinued, drainage of wastewater is carried out via the surrounding cover slots. The max permissible tile height incl. file adhesive is 11.5 mm. Naturally, the version with optional surface is also available for the thin bed sealing. Thin bed sealing To avoid damages to the basic structure of a building, a reliable sealing of the shower cannot be dispensed with. The new ACO top sections are also available for the thin bed sealing. An enclosed thin bed fleece simplifies the safe connection of the thin bed sealing to the sealing flange. Floor tile Tile adhesive Thin bed sealing Thin bed flange Grating Flexible joint Floor screed Top section Insulation Detail of thin bed sealing 52

ACO ShowerDrain Easyflow Modular system Design gratings Tileable surface Round top section Round top section with thin bed flange Square top section Square top section with thin bed flange Tileable top section Tileable top section with thin bed flange The Easyflow bathroom gullies offer flexibility in technical solutions and many different aesthetical options due to its modular set up. The elements to select are shown in the scheme below. The grating design option are: round gratings of stainless steel square gratings of stainless steel (with or without lock) tile gratings (maximum tile height 11.5 mm including glue) Extension The top sections are provided with stainless stele edge and can be chosen with or without thin-bed flange.the top sections can be easily cut to length to fit the finished floor height. If needed, an extension piece and / or a dumping flange (for water-proofing membrane) can be attached to the gully body. Compression-sealing flange ACO plastic floor drains 53

ACO ShowerDrain Easyflow Bath drains the curved and the square solution Order data Round design gratings Order data Square design gratings Art. no. Design Art. no. loosely applied Art. no. lockable Design 5141.25.21 Curl 5141.20.21 5141.21.21 Curl 5141.25.26 Forest 5141.20.26 5141.21.26 Forest 5141.25.29 Hawaii 5141.20.29 5141.21.29 Hawaii 5141.25.23 Linea 5141.08.23 5141.21.23 Linea 5141.25.30 Mix 5141.20.30 5141.21.30 Mix 5141.25.24 Palm 5141.20.24 5141.21.24 Palm 5141.25.22 Quadrato 5141.20.27 5141.21.27 Pixel 5141.25.28 Wave 5141.08.22 5141.21.22 Quadrato Every square design grating is also available as lockable version 5141.08.28 5141.21.28 Wave 54

ACO ShowerDrain Easyflow The design grating can be unlocked with a disk/coin The grating lifts up on its own very easily The design grating can be taken out easily Article description ACO stainless steel design grating electro-polished surface grating loosely applied in round design for insertion in top sections without grating for retrofitting of top sections with frame dimension Ø 136 mm load class K 3 suitable for barefoot area weight 0.6 kg Article description ACO stainless steel design grating electro-polished surface grating lockable / loosely applied in square design for insertion in top sections without grating for retrofitting of top sections with frame dimension 149 x 149 mm load class K 3 suitable for barefoot area weight 0.6 kg Lightpoint illumination for bath drains Order data Lightpoint Designation Design Art. no. Lightpoint illumination kit for top sections Rechargeable LED illumination module, installation in ACO top sections, with integrated switch control, for contact-free On and Off function. LED illuminated module suitable for underwater use Red 9010.89.10 Blue 9010.89.11 Green 9010.89.12 Warmwhite 9010.89.13 The illumination kit consists of: 1 illuminated module 1 recharger 230 V connection Lightpoint single module Rechargeable LED illumination module, installation in ACO top sections, with integrated switch control, for contact-free On and Off function. LED illuminated module suitable for underwater use Red 9010.89.15 Blue 9010.89.16 Green 9010.89.17 Warmwhite 9010.89.18 Single module 55

ACO ShowerDrain Easyflow Suitable round design gratings on page 54 Suitable square design gratings on page 54 Order data Square top sections Designation Art. no. Dimensional drawing Product illustration Plastic top section, material ABS, for standard or lockable design gratings 149 Height adjustability from 18 to 135 mm when combined with Easyflow gully bodies 5141.43.00 150 Ø125 Plastic top section, material ABS, for round design gratings Ø136 Height adjustability from 8 to 135 mm when combined with Easyflow gully bodies 5141.46.00 150 Ø125 Plastic top section, material ABS, for standard or lockable design gratings, with thin bed flange and cloth fleece Height adjustability from 18 to 135 mm when combined with Easyflow gully bodies 5141.48.00 150 38 10 13 Ø350 Ø252 149 Ø125 Plastic top section, material ABS, for round design gratings, with thin bed flange and cloth fleece 8 Ø350 Ø252 Ø136 Height adjustability from 8 to 135 mm when combined with Easyflow gully bodies 5141.42.00 150 38 Ø125 Plastic top section, material ABS, for in situ tiling Height adjustability from 26 to 135 mm when combined with plastic drain bodies tileable, 10 mm 5141.24.00 150 25 12 149 121 Ø125 Plastic top section, material ABS, for in situ tiling, with thin bed flange and cloth fleece 24 27 Ø350 Ø252 149 121 Height adjustability from 62 to 162 mm when combined with plastic drain bodies 5141.31.00 150 38 56 tileable, 10 mm Ø125

ACO ShowerDrain Easyflow 57

ACO ShowerDrain Easyflow Easyflow gully bodies for bath drainage Article description gully bodies DN 50 for the shower area, suitable for push-fit pipe sockets with vertical or horizontal outlet of plastics tested according to DIN EN 1253 removable foul air trap of plastics ready for installation with top section and design grating optionally with lateral inlet DN 50 Product advantages Bodies can be easily equipped with an optional compression sealing flange at site All available top sections are height-adjustable, including also the thin-bed top sections The foul air trap can be easily removed and cleaned Installation example Tiles with adhesive Thin bed sealing Screed Insulation Concrete 58

ACO ShowerDrain Easyflow Order data Easyflow gully bodies Designation Art. no. Dimensional drawing Product illustration Horizontal outlet, foul air trap with 50 mm water seal, flow rate 1.5 l/s 2500.05.00 102 DN 50 Horizontal outlet, with lateral inlet DN 50, foul air trap with 50 mm water seal, flow rate 1.5 l/s 2500.00.00 102 DN 50 Ø149 Ø125 DN 50 231 Vertical outlet, foul air trap with 50 mm water seal, flow rate 1.6 l/s 2500.55.00 167 114 Ø149 Ø125 DN 50 Horizontal outlet, foul air trap with 30 mm water seal, flow rate 0.8 l/s 2505.05.00 82 Ø149 Ø125 30 DN 50 194 Horizontal outlet, with lateral inlet DN 50, foul air trap with 50 mm water seal, flow rate 0.8 l/s 2505.00.00 82 DN 50 Ø149 Ø125 30 DN 50 231 Compression sealing flange for Easyflow gully bodies 2040.00.02 Extension element for Easyflow gully bodies 17 2040.00.00 178 Ø125 59

Bath drain with Showerboard Plastic flange with sealing Article description ready-to-install shower bottom of hard foam for drain bodies DN 50 coated with water-impermeable fleece ready-to-tile for flush-with-floor tile covering fleece overlapping (70 mm) for the safe sealing of floor and wall transitions ready-made slope of 2 % to central floor drain accessible with wheel chair as from tile size: 50 x 50 mm H H Substructure element (optionally available) L L Integrated, screwed floor drain from the bath drain range Vliesüberstand umlaufend 70 mm Fleece projection Vliesüberstand surrounding umlaufend 70 70 mm mm 55 Showerboard mit Ablaufkörper DN50 1,5 30 mm Geruchverschluss bestehend aus Showerboard und Unterbauelement 55 mm Showerboard with drain body DN 50, 1.5 inclination, 30 mm odour seal, substructure element 55 mm X min. H 55 55 20 Y min. Y min. H H H 20 55 X min. Showerboard mit Ablaufkörper DN50 1,5 Showerboard with drain body DN 50, 1.5 inclination, 50 mm Showerboard Geruchverschluss mit 50 mm bestehend odour seal, aus Showerboard substructure und Unterbauelemente elements 55 mm + 20 mm 55 mm + 20 mm H Installation dimensions Showerboard 55 20 60 55 20 H Z min. Showerboard with drain body DN 50, 90 inclination, 50 mm odour seal, substructure elements 55 mm + 20 mm Showerboard mit Ablaufkörper DN50 90 50 mm Geruchverschluss bestehend aus Showerboard Z min. L (mm) X (mm) Y (mm) Z (mm) H (mm) 500 x 500 91 111 111 7 800 x 800 93 113 113 7 900 x 900 95 115 115 7 1000 x 1000 97 117 117 7 1200 x 1200 100 120 120 7

ACO ShowerDrain Easyflow Order data Showerboard Designation Design (mm) Art. no. Illustration ACO Showerboard for spot drainage ACO substructure element for ACO Showerboard (two-part, total height 75 mm) Plastic drain body, top frame with slotted grating, 1.5 inclination, water trap height 50 mm, installation height 115 mm, H* = 7 mm (min.) 500 x 500 620395 800 x 800 620396 900 x 900 620397 1000 x 1000 620398 1200 x 1200 620399 500 x 500 620400 800 x 800 620401 900 x 900 620402 1000 x 1000 620403 1200 x 1200 620404 DN 50 620392 Plastic drain body, top frame with slotted grating, 90 inclination, water trap height 50 mm, installation height from 115 mm, H* = 7 mm (min.) DN 50 620393 Plastic drain body, top frame with slotted grating, 1.5 inclination, water trap height 30 mm, installation height 95 mm, H* = 7 mm (min.) DN 50 620394 Stainless steel frame for insertion of a square design grating in one of above drain bodies H* = 19 mm (min.) Stainless steel frame for insertion of a round design grating in one of above drain bodies H* = 10 mm (min.) 620475 620476 Round and square design gratings on page 54 Top section for optional surface, tileable, for insertion in one of above drain bodies H* = 26 mm (min.) 620477 Height adjustment ring for insertion of floor coverings with higher structure H* = 6 mm (min.) 5141.30.15 61 * H: Refer to dimension in drawing on page 60

ACO ShowerDrain Wal-Selecta Wal-Selecta cast iron gully bodies for bath drainage Wal-Selecta floor drains are made of cast iron with graphite flakes pursuant to DIN 1691. This is an iron-carbon alloy in which the carbon is incorporated within the metallic ground mass in the form of flakes. This graphite lattice gives the cast iron its superb corrosion resistance. This special cast iron therefore has an excellent track record in drainage applications. Fire protection with Wal-Selecta The topic preventive fire protection in the floor drain area is of central interest. Especially when installing such drains in buildings of particular type and use, e. g. hotels, hospitals, old people's homes or schools, the relevant fire resistance class of ceiling or floor has to be observed in accordance with state building regulations. Wal-Selecta floor drains with vertical drain socket comply with fire resistance classes R 30 to R 120 if fire protection odour seals are used together with fire protection cartridges. Here, double protection is guaranteed: fire protection is guaranteed in the case of fire coming from below as well as from above. Here, ACO offer the right solution for each application with the Wal-Selecta range. As unique system provider, ACO have tested their floor drains successfully from above as well as from below. The testing was carried out as per DIN 4102. Leaflets on fire protection can be downloaded under www.aco-haustechnik.de in Service/Leaflets path Double safety in the case of fire. Wal-Selecta floor drain with fire protection insert Standards and certification All ACO Building Services Wal-Selecta cast iron floor drains are manufactured pursuant to DIN EN 1253 and DIN 19599. The whole of the Wal-Selecta floor drain product line in non-flammable cast iron has also been tested pursuant to DIN 4102 specifications, and is certified in accordance with the authorisation regulations for fire resistance classes R 30 to R 120. The floor drains with horizontal outlet sockets are certified by MPA NRTW, Erwitte office, and issued with General Building Supervisory Authority Test Certificate No. P-MPA-E-02-005. ACO Building Services has received General Building Supervisory Authority Authorisation No. Z-19.17.1527 for the floor drains with vertical outlet sockets. 62

ACO ShowerDrain Wal-selecta Order data Wal-Selecta cast iron drain bodies Designation Art. no. Dimensional drawing Product illustration Cast iron drain body DN 50, inclination 1.5 as per DIN EN 1253 With adhering flange and removable odour seal for water trap height of 50 mm, flow rate 1.0 l/s 5125.80.00 134 3 50 345 145 150 106 1.5 Cast iron drain body DN 50, inclination 1.5 as per DIN EN 1253 With compression-sealing flange and removable odour seal for water trap height of 50 mm, flow rate 1.0 l/s 5128.90.00 134 3 50 345 145 150 1.5 106 Cast iron drain body DN 50, inclination 90 as per DIN EN 1253 With adhering flange and removable odour seal for water trap height of 50 mm, flow rate 1.0 l/s 5125.60.00 195 3 50 68 345 145 Cast iron drain body DN 50, inclination 90 as per DIN EN 1253 With compression-sealing flange and removable odour seal for water trap height of 50 mm, flow rate 1.0 l/s 5128.60.00 195 3 50 68 345 145 Fire protection cartridge fire resistance class DN 50, R 30 to R 120 Fire protection equipment for floor drains 90 with ALL PURPOSE odour seal, flow rate 0.8 l/s 5150.10.17 Top sections on page 56 Design gratings on page 54 63

ACO ShowerDrain EG 150 ACO ShowerDrain EG 150 stainless steel gullies The ACO ShowerDrain EG 150 gully series offers various advantages for a wide range of applications. The gullies can be used for construction and renovation of single-family houses just as well as in public buildings. Installation is possible in shower areas, bath rooms and several other areas, where drainage has to be fulfilled via gullies with smooth surface and excellent material properties. The ACO ShowerDrain EG 150 gullies are available to all the floor types including the cement and resin cast floors, ceramic paving and elastic vinyl floor covering. The ShowerDrain EG 150 gullies are also available with back inlets. For cementitious/resin screed and tile applications Page 66 For damp proof membrane bonding Page 68 For vinyl sheet flooring Page 69 64

ACO ShowerDrain EG 150 65

ACO ShowerDrain EG 150 ACO ShowerDrain EG 150 gullies Article description gully DN 32, 50 or 75 suitable for all push fit pipe socket systems top sections can be rotated and telescopically height adjusted for easy levelling with finished floor stainless steel gully body, grating and foul air trap flow rate tested to EN 1253 top dimensions 150 x 150 mm brushed silk gloss grating with locking available with lateral inlets DN 32 and DN 40 Product advantages flexible installation due to rotatable and adjustable top section suitable for public area s due to locked grating removable foul air trap for easy cleaning and maintenance available with vinyl sheet flooring Compact design ideal for reconstruction Lateral inlets (options) for three additional connections Gratings with silk gloss ideal for shower areas Installation example Tiles with adhesive Thin bed sealing Screed 66 Concrete

ACO ShowerDrain EG 150 Order data EG 150 gullies Designation Art. no. Dimensional drawing Product illustration Horizontal outlet, with heightadjustable top section and grating 150 mm, foul air trap with 50 mm water seal, flow rate 1.2 l/s 120-155 14-49 6 150 x 150 70 Outlet DN 50 405151 139 Ø50 Vertical outlet, with height-adjustable top section and grating 150 mm, foul air trap with 50 mm water seal, flow rate 1.2 l/s 190-225 129-164 6 10-49 150 x 150 6 Outlet DN 50 405149 Ø 50 Ø 132 Horizontal outlet, with heightadjustable top section and grating 150 mm, foul air trap with 50 mm water seal, with three lateral inlets DN 32/40 under FAT, flow rate 1.2 l/s 120-150 60 6-43 6 150 x 150 70 Outlet DN 50 405153 DN 32/40 139 Ø 50 Horizontal outlet, with heightadjustable top section and grating 150 mm, foul air trap with 50 mm water seal, with three lateral inlets DN 32/40, flow rate 1.2 l/s 215-250 83-118 14-49 DN 32/40 150 x 150 167 Outlet DN 50 405152 137 Ø 50 Vertical outlet, with height-adjustable top section and grating 150 mm, foul air trap with 50 mm water seal, with three lateral inlets DN 32/40, flow rate 1.2 l/s 215-250 70-106 10-49 DN 32/40 150 x 150 6 Outlet DN 50 405150 Ø 50 Ø 110 Horizontal outlet DN 32, with grating 150 mm flow rate 0.75 l/s, without foul air trap, fixed height 52 6 150 x 150 Ø 32 Outlet DN 32 400791 105 67

6 6 15.0000 ACO ShowerDrain EG 150 Order data EG 150 gullies for damp roof membrane applications* Designation Art. no. Dimensional drawing Product illustration Horizontal outlet, with heightadjustable top section and grating 150 mm, foul air trap with 50 mm water seal, flow rate 1.2 l/s Outlet DN 50 405156 120-160 112-127 6-30 Ø 250 150 x 150 6 139 Ø 50 70 Vertical outlet, with height-adjustable top section and grating 150 mm, foul air trap with 50 mm water seal, flow rate 1.2 l/s Outlet DN 50 405154 188-228 125-155 6-30 6 Ø 250 150 x 150 Ø 50 Ø 132 Horizontal outlet, with heightadjustable top section and grating 150 mm, foul air trap with 50 mm water seal, with three lateral inlets DN 32/40 under FAT, flow rate 1.2 l/s Outlet DN 50 405158 120-160 112-137 65-80 6-30 60 DN 32/40 Ø 250 150 x 150 139 6 Ø 50 12-51 70 Horizontal outlet, with heightadjustable top section and grating 150 mm, foul air trap with 50 mm water seal, with three lateral inlets DN 32/40, flow rate 1.2 l/s Outlet DN 50 405157 213-272 6-50 75-90 DN 32/40 Ø 250 150 x 150 166 Ø 50 137 Vertical outlet, with height-adjustable top section and grating 150 mm, foul air trap with 50 mm water seal, with three lateral inlets DN 32/40, flow rate 1.2 l/s 211-252 276-312 71-107 6-30 DN 32/40 Ø 250 150 x 150 6 Outlet DN 50 405155 Ø 50 Ø 110 68 Horizontal outlet with heightadjustable top section and with grating 150 mm flow rate 0.75 l/s, without foul air trap, suitable for seepage water Outlet DN 32 400793 62-72 6-20 Ø 250 150 x 150 105 Ø 32 * not suitable for seepage water, except article number 400793

ACO ShowerDrain EG 150 Order data EG 150 gullies with clamping flange for vinyl sheet flooring applications Designation Art. no. Dimensional drawing Product illustration Horizontal outlet, with heightadjustable top section and grating Ø 150 mm, foul air trap with 50 mm water seal, flow rate 1.2 l/s 126-156 18-50 Ø 225 Ø 157 70 Outlet DN 50 405145 139 Ø 50 Vertical outlet, with height-adjustable top section and grating Ø 150 mm, foul air trap with 50 mm water seal, flow rate 1.2 l/s Outlet DN 50 405143 196-231 18-50 Ø 225 Ø 157 Horizontal outlet, with heightadjustable top section and grating Ø 150 mm, foul air trap with 50 mm water seal, with three lateral inlets DN 32/40 under FAT, flow rate 1.2 l/s Outlet DN 50 405147 127-162 60 18-50 Ø 50 Ø 132 Ø225 Ø157 DN 32/40 139 Ø50 70 Horizontal outlet, with heightadjustable top section and grating Ø 150 mm, foul air trap with 50 mm water seal, with three lateral inlets DN 32/40, flow rate 1.2 l/s Outlet DN 50 405146 220-250 69 18-50 DN 32/40 Ø 225 Ø 157 166 137 Ø 50 Vertical outlet, with height-adjustable top section and grating Ø 150 mm, foul air trap with 50 mm water seal, with three lateral inlets DN 32/40, flow rate 1.2 l/s Outlet DN 50 405144 (285-320) (224-259) 57 18-50 DN 32/40 Ø 225 Ø 157 Ø 50 Ø 110 69

ACO ShowerDrain FG ACO ShowerDrain FG gullies FG gullies are simple and robust gullies from stainless steel. Their minimalistic design and blasted surfaces make them very suitable for contemporary design bathrooms The robust body and massive upper surface and stainless steel foul air trap guarantee a problem free long term operation. The low height of the gully body makes the FG gullies suitable for both new construction and renovation. FG gullies are available in dimensions 100 x 100 mm, 150 x 150 mm, 200 x 200 mm as well as Ø 110 mm, especially for resin floors. All FG gullies have foul air trap with water trap of 50 mm according to EN 1253 and lockable versions are available for public areas. FG gullies the versions Standard version Version with flange for waterproofing membrane Round version for resin floors Installation example Tiles with adhesive Thin bed sealing Screed 70 Concrete