with/without backwater protection Project drains Catalogue 2.3 117
Project drains -Professional advantages KESSEL-: The functional Basement drain The Universal Basement drain rehfix With twin flap backwater valve Flexible options installation in water-tight cellars renovation! Low installation height - only 30 mm coverage Installation in basements Safe sealing against pressing water with special gasket set. Alternative seal with shallow bed Art. # 48 968. Hand-lockable emergency closure With twin flap backwater valve and odour trap Hand-lockable emergency closure (Visual control without removing the cover). Tool-free maintenance: Fast and simple cleaning with one-hand quick-release fastener. 1. stepless installation in slabs: rotatable tiltable height adjustable 2. Stepless installation with extension section Art. # 38 670. Tool-free maintenance. Fast and simple cleaning with one-hand quick-release fastener. Three lateral inlets Three lateral inlets ( 2 x Ø 50 and 1 x Ø 75) are attached as standard. Inlets that are not needed are closed with special socket plugs. Height adjustable Products - see page 120 Products - see page 121 118 Catalogue 2.3
and technical all-rounder Compact basement drains with volatile liquid trap Project drains For various requirements The practical and economical alternative with or without twin flap backwater valve Secure against leaking heating oil The odour trap also acts as sludge trap. It can be simply removed via the handle easy cleaning. Pressure-proof and sturdy cellar drain eeper installation with extension section to compensate the level (Installation height extension by 80 mm). Frost-proof material The ideal solution as a basement stairwell drain Installation in basements Safe sealing against pressing water with special gasket set. stepless installation in slabs: rotatable tiltable height adjustable Sealed against ground moisture With extension section and counterflange Art. # 27 298. stepless installation in slabs: rotatable tiltable height adjustable Extensive accessories program For subsequent retrofitting and deeper installation, e.g. Multistop Alternative seal With shallow bed Art. # 48 968. Twin flap backwater valve can also be retrofitted. Fast and simple cleaning with one-hand quick-release fastener. Products - see page 122 Products - see page 123 Catalogue 2.3 119
Project drains Basement drain The Universal made of polymer Ø 110 with/without twin flap backwater valve and odour trap For interior installation according to Illustration and dimensioned drawing 186 67 new buildings! 70 60 230 200 380 30-80 110 73 Art. # 27 621 Installation area 400 x 320 mm * Ø = Outer iameter Accessories Article description Basement drain The Universal with/without twin flap backwater valve and odour trap in PP, Ø 110 Lateral outlet 2.5, 1.8 l/sec flow rate With 2 inlets Ø 50, 1 inlet Ø 75. With/without removable twin flap backwater valve and emergency closure which can be locked by hand. Odour trap height 60 mm, with removable sludge trap. With telescopically height adjustable upper section made of polymer 1 slotted cover 200 x 200 mm made of polymer, black. Installation depth () 216-276 mm 2 slotted cover 200 x 200 mm and rim, screwed. Installation depth () 216-266 mm Class L 15 (able to withstand loads up to max. 1.5 to). According to EN 13564 Type 5 With twin flap backwater valve: 1 2 Ø 110 27 611 Ø 110 27 621 Without twin flap backwater valve: 1 2 Ø* Ø 110 29 111 Ø 110 29 121 150 320 198 12-25 Variofix shallow bed in ABS with slotted cover and rim 200 x 200 mm, screwed, Class L 15-48968 200 198 258 200 44 Upper section with support rim in Ecoguss with round slotted cover in Ecoguss Ø 235 mm with Lock & Lift System, Class B 125 (able to withstand loads up to max. 12.5 to) - 67985 Sealed with respect to floor moisture 150 320 202 200 30 For installation in 30 365 204 166 in ABS with pressure sealing flange and counter flange H = 150 mm in Ecoguss with pressure sealing flange and counter flange H = 166 mm + Elastomer membrane in NBR - 27298-48958 - 48982 175 200 in ABS H = 175 mm, with lip seal 120 Catalogue 2.3 46 Rodent protection - 48988-27609
Basement drain rehfix made of polymer Ø 110 with/without twin flap backwater valve and odour trap For interior installation according to Illustration and dimensioned drawing Article description Ø* renovation! min. 25 max. 55 185 285 168 x 210 190 110 30 Art. # 27 301 Installation area 320 x 190 mm Accessories 210 x 167 200 x 159 14 Basement drain rehfix with/without twin flap backwater valve and odour trap in ABS, Ø 110 lateral outlet 2.5, 1.8 l/sec flow rate With/without removable twin flap backwater valve and emergency closure which can be locked by hand. With odour trap. With removable sludge trap and integrated, height adjustable. with slotted cover 150 x 190 mm made of polymer, black, with Easy Entry Function. Class K 3 (able to withstand loads up to max. 300 kg). Installation depth () 210-240 mm. According to EN 13564 Type 5. made of polymer black H = 183 mm With twin flap backwater valve: Ø 110 27 301 Without twin flap backwater valve: Ø 110 33 101-38 670 Project drains 183 189 x 148 Art. # 39 005 50 75 110 67 71 90 Inlet sections made of polymer incl. flat seal Ø 50 Ø 75 Ø 110 39005 39007 39100 Hole saw drilling lateral surfaces inlets and outlets Ø 50, 75, 110 (Saw blade holder Ø = 145 mm) Rodent protection - 50 101-27609 * Ø = Outer iameter 75 131 110 Transition section Ø 110 / 75 article numbers: 27 611, 27 621, 27 301, 29 111, 29 121, 33 101, 36 501 Ø 75 / Ø 110 27 602 Catalogue 2.3 121
Project drains made of polymer Ø 75 / Ø 110 with/without odour trap For interior installation according to Illustration and dimensioned drawing Art. # 36 501 Art. # 45 110.40 Installation area 220 x 280 mm Accessories * Ø = Outer iameter Accessories 132 150 148 min. 20 max. 76 92 Installation area 220 x 180 mm Article description Basement drain in PP, Ø 110 Lateral outlet 2.5, 1.6 l/sec flow rate With removable odour trap and sludge trap. With in PP with slotted cover 150 x 150 mm made of polymer, black. Class K 3 (able to withstand loads up to max. 300 kg). made of polymer Can be extended by 80 mm Odour trap insert with integrated sludge trap Ø* Ø 110 36 501-36 590-60 103 Basement drain in PP, Ø..., lateral outlet 2.5 /vertical 1.8 l/sec flow rate Lateral outlet With odour trap: Ø 110 45 110.40 With/without removable odour trap. Without odour trap: With lip seal and protective cover use during construction. Ø 110 34 101 With in ABS Vertical outlet with slotted cover 138 x 138 mm in ABS, black. With odour trap: Class K 3 (able to withstand loads up to max. 300 kg). Ø 110 45 210.40 Installation dimensions of vertical drain body see page 80 Without odour trap: Multistop as an odour, foam, rodent and insect stop Hair filter made of polymer Ø 110 34 102-48 500-48 700 348 23 30 Glue flange with counter flange Art. # 34 101, 34 102, 45 210.40, 45 110.40 Pressure sealing flange + Elastomer membrane in NBR - 48 410-48402 - 48981 136 150 35 in ABS with lip seal without lateral inlet - 48 987 125 50 Bell-shaped odour trap insert 50 mm seal water height Sludge trap - 27 169-48 168 122 Catalogue 2.3
Volatile liquid traps made of polymer Ø 110 with/without twin flap backwater valve For interior installation according to -3 and 5 / EN 13564 Type 5 Illustration and dimensioned drawing with twin flap backwater valve min. 30 max. 90 186 243 230 200 320 76 Installation area 400 x 250 mm 110 without twin flap backwater valve min. 30 max. 90 186 Installation area 400 x 250 mm * Ø = Outer iameter 243 230 200 320 76 110 Article description Volatile liquid trap made of polymer, Ø 110 1.0 l/sec flow rate With twin flap backwater valve according to EN 13564 Type 5. With integrated odour trap and sludge trap. with slotted cover made of polymer, black. Installation depth () 216-276 mm Class K 3 (able to withstand loads up to max. 300 kg). According to EN 13564 Type 5-3 and 5 Volatile liquid trap made of polymer, Ø 110 1.0 l/sec flow rate With integrated odour trap and sludge trap. with slotted cover made of polymer, black. Installation depth () 216-276 mm Class K 3 (able to withstand loads up to max. 300 kg). -3 and 5 Ø* Ø 110 52 101 Ø 110 51 101 Project drains KESSEL-Professional advantages Easy installation with adjustable upper section (vertically and laterally adjustable) Sealing gasket between extension section and flange - 27 298 (prevents floor moisture damage) Waterproofing seal - 48 968 Cast iron cover handles higher loads up to 12.5 tons (load class B) - 48 985 Upgradable to twin flap backwater valve Quick and easy cleaning with one-hand locking clasp Catalogue 2.3 123
Project drains Backwater pumping station Pumpfix S Basement drain Ø 110 with twin flap backwater valve and pump For interior installation according to Illustration and dimensioned drawing new buildings! 27-202 454 330 400 150 190 272-452 Article description Backwater pumping station Pumpfix S with twin flap backwater valve and pump For wastewater without sewage made of polymer, Ø 110 Lateral outlet 2.5, 1.6 l/sec flow rate For installation in a slab/floor installation depth () from 481-656 mm With removable pump, twin flap backwater valve and odour trap. Twin flaps, self-closing, one of which can be locked by hand, self activating pump during backwater. With telescopic free height and level adjustments recessed cover on-site tiling, Class A 15, made of polymer. With moisture protective sealing flange. Not use as a lifting station. Pumping height m [m] 8,0 7 6 5 4 3 2 1 7,0 6,0 5,0 4,0 3,0 2,0 1,0 Ø* Ø 110 28 451 Installation area 700 x 700 mm * Ø = Outer iameter According to EN 13564 Type 5 0,0 1 2 3 4 5 6 7 [Qm 3 /h] Pumping capacity Q (m 3 /h) 0,0 1,0 2,0 3,0 4,0 5,0 6,0 7,0 8,0 124 Catalogue 2.3 KESSEL-Professional advantages Vertically adjustable upper section stepless installation in slabs: Rotatable, tiltable, vertically adjustable Installation in. Gasket set to prevent groundwater infiltration. Elegant optical appearance due to recessed cover on-site tiling Perfect drainage of outdoor basement access steps with additional inlet connections Wastewater discharging even during backwater