UTTING TOOLS Stellram Cutting Tools 7713VR Round Insert Milling Cutter with Indexation Inch
7713VR Series Copy / Contour Milling Cutter ROUN INSERT MILLING CUTTER WITH INEXATION The 7713VR is our newest round insert cutter series. esigned with a new silver-satin surface treatment that reduces the body degradation during high performance plications and enhances the body tool life. This cutter series has an anti-rotation design which ensures a precise number of indexes per insert. This gives a maximum possible usage of the available edges for roughing plications. This unique patented pocket system prevents the inserts from rotating in the pocket, during heavy feed machining and unstable conditions. This 7713VR cutter is excellent for roughing and semi-finishing of all materials, specifically for Stainless and High Temperature Alloys as well as for, Tool and Aluminum Alloys. Facing Copy / 3 Ramping Spiral / Circular Helical Helical Pocketing Interpolation Interpolation with Bore Hole 7713VR 7713VR10: Maximum a p = 0.197" iameter Range = 1.00" to 2.50" 7713VR12: Maximum a p = 0.240" iameter Range = 1.00" to 3.00" 1
7713VR10 Copy / Contour Milling Cutter d 1 L I 1 * a * Cylindrical Shank d 1 H Product imensions (inch) Spares Item escription 7713VR10 Cylindrical Shank - Medium and Fine Pitch 5672803 C7713VR10CA1.00Z3R2.0 1.000 0.607 7.874 1.970 1.000 0.197 3 5672409 4007T 5671642 TB15 27.40 5673825 C7713VR10CA1.25Z3R2.7 1.250 0.857 9.840 2.700 1.250 0.197 3 5672374 4008T 5671642 TB15 27.40 5672804 C7713VR10CA1.25Z4R2.7 1.250 0.857 9.840 2.700 1.250 0.197 4 5672374 4008T 5671642 TB15 27.40 7713VR10 Shell Mill Fixation - Medium and Fine Pitch 5673597 C7713VR10-A1.50Z05R 1.500 1.107 1.260-0.500 0.197 5 5672374 4008T 5671642 TB15 27.40 5672805 C7713VR10-A2.00Z07R 2.000 1.607 1.570-0.750 0.197 7 5672374 4008T 5671642 TB15 27.40 5673042 C7713VR10-A2.50Z08R 2.500 2.107 1.570-0.750 0.197 8 5672374 4008T 5671642 TB15 27.40 = Effective iameter (Axis) from Insert centerline to centerline a* = Outside iameter a* Effective iameter L/H l 1 d 1 max No. of Teeth Screw Tightening in. lbs. a * Shell Mill Fixation M d 1 L Product imensions (inch) Spares Item escription 7713VR10 Modular Head - Medium and Fine Pitch 5672806 A7713VR10SA1.00Z2R1.4 1.000 0.607 1.377 M12 0.492 0.197 2 5672409 4007T 5671642 TB15 27.40 5673765 A7713VR10SA1.00Z3R1.4 1.000 0.607 1.377 M12 0.492 0.197 3 5672409 4007T 5671642 TB15 27.40 5672807 A7713VR10SA1.25Z3R1.7 1.250 0.857 1.693 M16 0.669 0.197 3 5672374 4008T 5671642 TB15 27.40 5673043 A7713VR10SA1.25Z4R1.7 1.250 0.857 1.693 M16 0.669 0.197 4 5672374 4008T 5671642 TB15 27.40 = Effective iameter (Axis) from Insert centerline to centerline a* = Outside iameter a* Effective iameter L M d 1 max No. of Teeth Note: The 7713VR10 series with anti-rotation pocket ensures a precise number of indexes per insert. This unique patented pocket design prevents the inserts from rotating in the pocket during heavy feed machining and unstable conditions. Screw Tightening in. lbs. a * Modular Head 7713VR10 Technical Information (inch) Product imensions epth of Cut () a p Item escription Facing Pitch Ramping Angle Helical Hole min. - max. max Helical / Linear Max RPM 5672803 C7713VR10CA1.00Z3R2.0 11.70 0.607 1.291 1.921 64,500 5673825 C7713VR10CA1.25Z3R2.7 5.70 0.857 1.791 2.421 0.130 53,500 5672804 C7713VR10CA1.25Z4R2.7 5.70 0.857 1.791 2.421 53,500 5673597 C7713VR10-A1.50Z05R 7.75 1.107 2.291 2.921 47,000 5672805 C7713VR10-A2.00Z07R 5.10 1.607 3.291 3.921 0.130 39,500 5673042 C7713VR10-A2.50Z08R 0.00 2.107 4.291 4.921 34,000 5672806 A7713VR10SA1.00Z2R1.4 11.70 0.607 1.291 1.921 64,000 5673765 A7713VR10SA1.00Z3R1.4 11.70 0.607 1.291 1.921 64,000 0.130 5672807 A7713VR10SA1.25Z3R1.7 5.70 0.857 1.791 2.421 53,500 5673043 A7713VR10SA1.25Z4R1.7 5.70 0.857 1.791 2.421 53,500 Ramping Flat Facing Pitch Helical Interpolation 2
7713VR10 Milling Inserts & Recommended Feeds RPEX10-701 RPHT10-422 RPHT10-T RPMW10-T RPPT10-432 Product Application & Material imensions (mm) Roughing (Heavy Machining) Item escription Grade max 0.197 (*Ap recommendation below) Medium Roughing Light machining (Finishing) epth of Cut (inch) min. - max. min. - max. 0.040-0.080 0.008-0.006 d (IC) l s r hm min 5652800 RPEX10T3M0F701X4 SP4019 0.394-0.156 0.197 0.001 5656242 RPEX10T3M0F701X4 GH1 0.394-0.156 0.197 0.001 5667975 RPEX10T3M0E701X4 SP6519 - - 0.394-0.156 0.197 0.001 5660462 RPHT10T3M0E422X4 X500 - - 0.394-0.156 0.197 0.002 5665491 RPHT10T3M0E422X4 X700-0.394-0.156 0.197 0.002 5659867 RPHT10T3M0E422X4 SP6519-0.394-0.156 0.197 0.002 5666519 RPHT10T3M0E422X8 X500 - - 0.394-0.156 0.197 0.002 5659562 RPHT10T3M0E422X8 X700 - - 0.394-0.156 0.197 0.002 5660778 RPHT10T3M0E422X8 SP6519 - - 0.394-0.156 0.197 0.002 0565128 RPHT10T3M0TX4 X500 - - 0.394-0.156 0.197 0.003 5655035 RPHT10T3M0TX4 SP6519 - - 0.394-0.156 0.197 0.003 5656917 RPMW10T3M0TX4 X500 - - 0.394-0.156 0.197 0.005 5894139 RPPT10T3M0E432X5 X500 - - 0.394-0.156 0.197 0.002 5894140 RPPT10T3M0E432X5 SC6525-0.394-0.156 0.197 0.002 5894201 RPPT10T3M0E432X5 SP6519-0.394-0.156 0.197 0.002 5894202 RPPT10T3M0E432X5 X700 - - 0.394-0.156 0.197 0.002 Machining Choice: 1 st Choice 2 nd Choice 3 rd Choice Material Guide Key descriptions found on page 7. enotes: 1. Max. recommended for roughing = 0.098" (depending on the plication) 2. RPMW10T3M0T-X4 and RPHT1204M0T-X4 in grade X500 should be used for materials with heavy scale/bad skin. 3. RPPT10T3M0E-432-X5 are economical press to size inserts. 4. RPEX10T3M0F-701-X4 SP4019 is for fine finishing of HTA materials (High Temp Alloys). 5. RPHT10T3M0E-422-X4 are ground inserts primarily recommended for heavy roughing of high performance materials. 6. X4 refers to 4 cutting edges/number of indexations. 7. X5 refers to 5 cutting edges/number of indexations. Recommended for lower depth of cut up to 0.08". 8. X8 refers to 8 cutting edges/number of indexations. Recommended for lower depth of cut up to 0.06". 7713VR10 Feeds f z (inch/tooth) 50 100% ae d s Geometry Grade Operation Unalloyed Alloyed Stainless Stainless Refractory PH Grey Iron Spheroidal- uctile Iron Malleable Iron Aluminium & Alloys <16% Si 116 HBN Aluminium & Silicon >16% Si 92 HBN HTA Iron HTA Cobalt HTA Nickel HTA Titanium Hard >1400 N/mm 2 >415 HBN Chilled Cast Iron >1400 N/mm 2 >400 HBN Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. F-701-X4 SP4019 Contouring - - - - - - - 0.001-0.004 0.001-0.003 0.001-0.003 0.001-0.003 0.001-0.003 0.001-0.004 - - F-701-X4 GH1 Contouring - - - - - - - 0.001-0.004 0.001-0.003 - - - - - - E-701-X4 SP6519 Contouring - - - - - - - - - 0.001-0.003 0.001-0.003 0.001-0.003 0.001-0.004 - - E-422-X4 X500 Contouring - - 0.003-0.012 0.002-0.010 - - - - - 0.002-0.006 0.002-0.006 0.002-0.006 0.002-0.007 - - E-422-X4 X700 Contouring - - 0.003-0.011 0.002-0.009 - - - - - 0.002-0.006 0.002-0.006 0.002-0.006 0.002-0.006 - - E-422-X4 SP6519 Contouring 0.003-0.012 0.002-0.010 0.003-0.011 0.002-0.009 0.003-0.010 0.003-0.010 0.002-0.009 - - 0.002-0.006 0.002-0.006 0.002-0.006 0.002-0.006 - - E-422-X8 X500 Contouring - - - 0.002-0.010 - - - - - 0.002-0.006 0.002-0.006 0.002-0.006 0.002-0.007 - - E-422-X8 X700 Contouring - - 0.002-0.011 0.002-0.009 - - - - - 0.002-0.006 0.002-0.006 0.002-0.006 0.002-0.006 - - E-422-X8 SP6519 Contouring 0.003-0.012 0.002-0.010 0.002-0.011 0.002-0.009 0.003-0.010 0.003-0.010 0.002-0.009 - - - - - - - RPHT-T-X4 X500 Contouring - - 0.004-0.013 0.004-0.011 - - - - - 0.004-0.007 0.004-0.007 0.004-0.007 0.004-0.008 - - RPHT-T-X4 SP6519 Contouring 0.004-0.013 0.004-0.011 - - 0.004-0.012 0.004-0.012 0.004-0.011 - - - - - - - - RPMW-T-X4 X500 Contouring 0.005-0.014 0.005-0.013 0.005-0.014 0.005-0.012 0.005-0.013 0.005-0.013 0.005-0.012 - - 0.005-0.008 0.005-0.008 0.005-0.008 0.005-0.009 - - 432-X5 X500 Contouring - - 0.002-0.012 0.002-0.010 - - - - - 0.002-0.006 0.002-0.006 0.002-0.006 0.002-0.007 - - 432-X5 SC6525 Contouring 0.002-0.011 0.002-0.009 0.002-0.010-0.002-0.009 0.002-0.009 - - - - - - - - - 432-X5 SP6519 Contouring 0.002-0.012 0.002-0.010 0.002-0.011 0.001-0.009 0.002-0.010 0.002-0.010 0.002-0.009 - - - - - - - - 432-X5 X700 Contouring - - - 0.002-0.009 - - - - - 0.002-0.006 0.002-0.006 0.002-0.006 0.002-0.006 - - Note: HTA = High Temperature Alloys Recommended starting value in the middle between min max. 3
7713VR12 Contour Milling Cutter d 1 H L I 1 a * Cylindrical Shank d 1 a * Shell Mill Fixation M d 1 L a * Modular Head 7713VR12 Cylindrical Shank 5672623 C7713VR12CA1.00Z2R2.0 1.000 0.528 7.874 1.968 1.000 0.236 2 5672374 4008T 5673546 T15 27.40 5673499 C7713VR12CA1.25Z3R2.7 1.250 0.778 9.842 2.755 1.250 0.236 3 5672374 4008T 5673546 T15 27.40 7713VR12 Shell Mill Fixation - Medium and Fine Pitch 5673826 C7713VR12-A1.50Z4R 1.500 1.028 1.574-0.500 0.236 4 5672375 4010T 5673546 T15 27.40 5673766 C7713VR12-A1.50Z5R 1.500 1.028 1.574-0.500 0.236 5 5672375 4010T 5671642 TB15 27.40 5673044 C7713VR12-A2.00Z4R 2.000 1.528 1.574-0.750 0.236 4 5672375 4010T 5673546 T15 27.40 5672808 C7713VR12-A2.00Z5R 2.000 1.528 1.574-0.750 0.236 5 5672375 4010T 5673546 T15 27.40 5673045 C7713VR12-A2.00Z6R 2.000 1.528 1.574-0.750 0.236 6 5672375 4010T 5671642 T15 27.40 5673827 C7713VR12-A2.50Z6R 2.500 2.028 1.986-0.750 0.236 6 5672375 4010T 5673546 T15 27.40 5673046 C7713VR12-A2.50Z7R 2.500 2.028 1.986-0.750 0.236 7 5672375 4010T 5671642 T15 27.40 5672809 C7713VR12-A3.00Z8R 3.000 2.528 1.986-1.000 0.236 8 5672375 4010T 5673546 T15 27.40 = Effective iameter (Axis) from Insert centerline to centerline Product imensions (inch) Spares Item escription a* = Outside iameter Product imensions (inch) Spares Item escription 7713VR12 Modular Head - Medium and Fine Pitch 5672624 A7713VR12SA1.00Z2R1.4 1.000 0.528 1.377 M12 0.472 0.236 2 5672374 4008T 5673546 T15 27.40 5672810 A7713VR12SA1.25Z3R1.7 1.250 0.778 1.692 M16 0.669 0.236 3 5672374 4008T 5673546 T15 27.40 5673767 A7713VR12SA1.50Z4R1.7 1.500 1.028 1.692 M16 0.669 0.236 4 5672374 4008T 5673546 T15 27.40 5673598 A7713VR12SA1.50Z5R1.7 1.500 1.028 1.692 M16 0.669 0.236 5 5672374 4008T 5671642 TB15 27.40 = Effective iameter (Axis) from Insert centerline to centerline a* = Outside iameter a* a* Effective iameter Effective iameter L l 1 d 1 max L M d 1 max No. of Teeth No. of Teeth The 7713VR12 series with anti-rotation pocket ensures a precise number of indexes per insert. This unique patented pocket design prevents the inserts from rotating in the pocket during heavy feed machining and unstable conditions. Screw Tightening in Lbs. Screw Tightening in Lbs. 7713VR12 Technical Information (inch) Product imensions epth of Cut () a p Item escription Facing Pitch Ramping Angle Helical Hole min. - max. max Helical / Linear Max RPM 5672623 C7713VR12CA1.00Z2R2.0 0.528 9.50 1.134 1.921 0.160 49,000 5673499 C7713VR12CA1.25Z3R2.7 0.778 12.40 1.634 2.421 0.160 40,500 5673826 C7713VR12-A1.50Z4R 1.028 8.60 2.134 2.921 0.160 35,000 5673766 C7713VR12-A1.50Z5R 1.028 8.60 2.134 2.921 0.160 35,000 5673044 C7713VR12-A2.00Z4R 1.528 5.50 3.134 3.921 0.160 28,500 5672808 C7713VR12-A2.00Z5R 1.528 5.50 3.134 3.921 0.160 28,500 5673045 C7713VR12-A2.00Z6R 1.528 5.50 3.134 3.921 0.160 28,500 5673827 C7713VR12-A2.50Z6R 2.028 3.90 4.134 4.921 0.160 25,000 5673046 C7713VR12-A2.50Z7R 2.028 3.90 4.134 4.921 0.160 25,000 5672809 C7713VR12-A3.00Z8R 2.528 2.95 5.134 5.921 0.160 22,500 5672624 A7713VR12SA1.00Z2R1.4 0.528 9.50 1.134 1.921 0.160 49,000 5672810 A7713VR12SA1.25Z3R1.7 0.778 12.40 1.634 2.421 0.160 40,500 5673767 A7713VR12SA1.50Z4R1.7 1.028 8.60 2.134 2.921 0.160 35,000 5673598 A7713VR12SA1.50Z5R1.7 1.028 8.60 2.134 2.921 0.160 35,000 Ramping Flat Facing Pitch Helical Interpolation 4
7713VR12 Milling Inserts RPEX12-701 RPHT12-442 RPHT12-T RPMW12-T RPPT12-432 RPHT12-SGX RPPT12-SGX Product Application & Material imensions (inch) EP Item escription Grade Roughing (heavy machining) max 0.236* (*Ap recommendation below) Medium Roughing epth of Cut (mm) Light machining (finishing) min. - max. min. - max. 0.060-0.100 0.008-0.060 d (IC) l s r hm min 5682563 RPEX1204M0F701X4 GH1 0.472 0.187 0.236 0.001 5660351 RPHT1204M0E442X4 X500 - - 0.472-0.187 0.236 0.002 5668072 RPHT1204M0E442X4 X700 - - 0.472-0.187 0.236 0.002 5659264 RPHT1204M0E442X4 SP6519 - - 0.472-0.187 0.236 0.002 5658324 RPHT1204M0E442X5 SP6519-0.472-0.187 0.236 0.002 5657681 RPHT1204M0E442X5 X500 - - 0.472-0.187 0.236 0.002 5659561 RPHT1204M0E442X5 X700 - - 0.472-0.187 0.236 0.002 5674437 RPHT1204M0E442X5 SC6525 - - 0.472-0.187 0.236 0.002 5883445 RPHT1204M0SGX5 KCM40 - - 0.472-0.187 0.236 0.002 5674780 RPHT1204M0E442X8 SC6525 - - 0.472-0.187 0.236 0.002 5883446 RPHT1204M0SGX8 KCM40 - - 0.472-0.187 0.236 0.002 5654371 RPHT1204M0TX4 X500 - - 0.472-0.187 0.236 0.004 5651220 RPHT1204M0TX4 X700 - - 0.472-0.187 0.236 0.004 5652489 RPHT1204M0TX4 SP6519 - - 0.472-0.187 0.236 0.004 5665786 RPMW1204M0TX4 X500 - - 0.472-0.187 0.236 0.005 5660042 RPMW1204M0TX4 SP6519 - - 0.472-0.187 0.236 0.005 5667400 RPMW1204M0TX4 MP91M - 0.472-0.187 0.236 0.005 5675037 RPPT1204M0E432X5 SP6519 - - 0.472-0.187 0.236 0.002 5675038 RPPT1204M0E432X5 X500 - - 0.472-0.187 0.236 0.002 5674803 RPPT1204M0E432X5 X700 - - 0.472-0.187 0.236 0.002 5674698 RPPT1204M0E432X5 SC6525 - - 0.472-0.187 0.236 0.002 5883443 RPPT1204M0SGX5 KCM40 - - 0.472-0.187 0.236 0.002 5675140 RPPT1204M0E432X8 SP6519 - - 0.472-0.187 0.236 0.002 5674959 RPPT1204M0E432X8 X500 - - 0.472-0.187 0.236 0.002 5883444 RPPT1204M0SGX8 KCM40 - - 0.472-0.187 0.236 0.002 Machining Choice: 1 st Choice 2 nd Choice 3 rd Choice enotes: 1. Max. recommended for roughing = 0.137" (depending on the plication) 2. RPMW1204M0T-X4 and RPHT1204M0T-X4 in grade X500 should be used for materials with heavy scale/bad skin 3. RPPT1204M0.. are economical press to size inserts 4. RPHT1204M0E-442-X4 are ground inserts and primarily recommended for heavy roughing of high performance materials 5. X4 refers to 4 cutting edges/number of indexations. 6. X5 refers to 5 cutting edges/number of indexations. Recommended for lower depth of cut up to 0.100" 7. X8 refers to 8 cutting edges/number of indexations. Recommended for lower depth of cut up to 0.060" d s 5
7713VR12 Recommended Feeds 7713VR12 Feeds f z (inch/tooth) Geometry Grade Operation Unalloyed Alloyed Stainless Stainless Refractory PH Grey Iron Spheroidal- uctile Iron Malleable Iron Aluminium & Alloys <16% Si 116 HBN Aluminium & Silicon >16% Si 92 HBN HTA Iron HTA Cobalt HTA Nickel HTA Titanium Hard >1400 N/mm 2 >415 HBN Chilled Cast Iron >1400 N/mm 2 >400 HBN F-701-X4 GH1 Contouring - - - - - - - 0.001-0.005 0.001-0.004 - - - - - - E-442-X4 X500 Contouring - - 0.002-0.017 0.002-0.014 - - - - - 0.002-0.009 0.002-0.009 0.002-0.009 0.002-0.010 - - E-442-X4 X700 Contouring - - 0.002-0.015 0.002-0.013 - - - - - 0.002-0.009 0.002-0.009 0.002-0.009 0.002-0.010 - - E-442-X4 SP6519 Contouring - - 0.002-0.015 0.002-0.013 - - - - - 0.002-0.009 0.002-0.009 0.002-0.009 0.002-0.010 - - E-442-X5 SP6519 Contouring 0.004-0.016 0.002-0.015 - - - - - - - - - - - - - E-442-X5 X500 Contouring 0.004-0.017-0.002-0.017 0.002-0.014 - - - - - 0.002-0.009 0.002-0.009 0.002-0.009 0.002-0.010 - - E-442-X5 X700 Contouring 0.000-0.000 0.000-0.000 0.000-0.000 0.002-0.013 - - - - - 0.002-0.009 0.002-0.009 0.002-0.009 0.002-0.010 - - E-442-X5 SC6525 Contouring 0.004-0.016 0.002-0.014 0.002-0.015-0.004-0.015 0.004-0.015 - - - - - - - - - SGX5 KCM40 Contouring - 0.006-0.016 0.004-0.016 0.004-0.013 - - - - - 0.004-0.009 0.004-0.009 0.004-0.009 0.004-0.010 - - E-442-X8 SC6525 Contouring 0.002-0.016 0.002-0.014 0.002-0.015-0.002-0.016 0.002-0.015 - - - - - - - - - SGX8 KCM40 Contouring - 0.006-0.016 0.004-0.016 0.004-0.013 - - - - - 0.004-0.009 0.004-0.009 0.004-0.009 0.004-0.010 - - RPHT-T-X4 X500 Contouring - - 0.004-0.018 0.005-0.016 - - - - - 0.005-0.012 0.005-0.012 0.005-0.012 0.005-0.013 - - RPHT-T-X4 X700 Contouring - - 0.004-0.017 0.005-0.015 - - - - - 0.005-0.011 0.005-0.011 0.005-0.011 0.005-0.012 - - RPHT-T-X4 SP6519 Contouring 0.005-0.018 0.005-0.016 0.000-0.000 0.000-0.000 0.005-0.017 0.005-0.017 0.005-0.015 - - - - - - - - RPMW-T-X4 X500 Contouring 0.006-0.019-0.006-0.018 0.006-0.017 - - - - - 0.006-0.013 0.006-0.013 0.006-0.013 0.006-0.013 - - RPMW-T-X4 SP6519 Contouring 0.006-0.018 0.006-0.016 - - 0.006-0.018 0.006-0.017 0.006-0.016 - - - - - - - - RPMW-T-X4 MP91M Contouring 0.006-0.018 - - - 0.006-0.018 0.006-0.017 0.006-0.016 - - - - - - 0.004-0.006 0.004-0.006 SP6519 Contouring 0.004-0.016 0.004-0.015 - - 0.004-0.016 0.004-0.017 0.004-0.014 - - - - - - - - 432-X5 X500 Contouring 0.004-0.017-0.002-0.017 0.002-0.014 - - - - - 0.002-0.009 0.002-0.009 0.002-0.009 0.002-0.010 - - 432-X5 X700 Contouring - - - 0.002-0.013 - - - - - 0.002-0.009 0.002-0.009 0.002-0.009 0.002-0.010 - - 432-X5 SC6525 Contouring 0.004-0.016 0.002-0.014 0.002-0.015-0.004-0.015 0.004-0.015 - - - - - - - - - 432-X5 SGX5 KCM40 Contouring - 0.006-0.016 0.004-0.016 0.004-0.013 - - - - - 0.004-0.009 0.004-0.009 0.004-0.009 0.004-0.010 SP6519 Contouring 0.002-0.015 0.002-0.014 0.002-0.015 0.002-0.013 - - - - - - - - - - - 432-X8 X500 Contouring - - - - - - - - - 0.002-0.009 0.002-0.009 0.002-0.009 0.002-0.010 - - 432-X8 SGX8 KCM40 Contouring - - - 0.004-0.013 - - - - - 0.004-0.009 0.004-0.009 0.004-0.009 0.004-0.010 - - Note: HTA = High Temperature Alloys Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Recommended starting value in the middle between min. - max. 6
7713VR Recommended Speeds P Speed v c (SFM) 7713VR Series Coolant Recommendation Recommended Possible ISO M Materials Rm and Hardness -- + CV X Grade PV X Grade Speed min. - max. 425-885 425-970 375-785 375-855 460-1220 395-1070 330-690 330-790 330-755 345-955 245-525 245-595 245-575 265-690 165-330 165-360 165-460 PV PV Standard CV Standard PV Standard CV Standard 460-1130 395-1000 Uncoated Micrograin X500 X700 KCM40 SP6519 SC6525 SP4019 MP91M GH1 375-820 375-855 380-860 375-885 460-1020 330-720 345-755 330-780 345-770 395-825 165-360 165-375 165-380 165-395 Grey GG-Ft 480-970 K Cast Iron Spheroidal-uctile GGG-FGS 360-785 N Unalloyed Alloyed Stainless Aluminium & Alloys <600 N/mm 2 <180 HBN <950 N/mm 2 <280 HBN 700-950 N/mm 2 200-280 HBN 950-1200 N/mm 2 280-355 HBN 1200-1400 N/mm 2 355-415 HBN Austenitic + Ferritic 300 series Martensitic 400 series Refractory P.H. Malleable GTS - MN/MP Aluminium & Alloys < 16% Si 116 HBN Aluminium + Silicon > 16% Si 92 HBN Toughness 480-1285 380-1005 475-1200 375-935 330-720 345-855 1310-9500 970-7615 Wear resistance 1310-10005 970-8005 Iron Based 75-160 75-170 76-172 75-180 80-210 S High Temperature Alloys Cobalt Based Nickel Based 70-145 70-150 73-152 70-160 75-170 80-170 80-175 83-176 80-180 85-190 Titanium Based 115-240 115-250 118-252 120-260 120-275 H Hard Materials Hard >1400 N/mm 2 >415 HBN Chilled Cast Iron >1400 N/mm 2 > 400 HBN Note: Recommended starting value in the middle between min max. 165-345 130-310 7
7713VR Technical Information 7713VR Technical Information Working iameter: Formula to evaluate the correct working diameter based on axial depth of cut (a p ). r w = 2 + 2 x r 2 - (r -a p ) 2 2 w where: w = Working iameter 2 = iameter of cutter insert center to center r = Insert radius a p = Axial epth of Cut 7713VR Technical Information where: f z = Feed per tooth h m = Average chip thickness r = Insert radius a e = Radial epth of Cut a p = Axial epth of Cut Formula to find programmed feed rate based on radial engagement and axial depth of cut. f z = h m r 2 - ( r - a e ) 2 r x r 2 -( r - a ) 2 p r Formula to calculate the average chip thickness hm in relation with radial engagement and depth of cut. h m = f z x r 2 - ( r - a e ) 2 r x r 2 -( r - a ) 2 p r Simplified formulas to evaluate hm and fz based on radial engagement or depth of cut. Calculation of the average chip thickness in relation with the.o.c. (Axial) Formula: Program Feed Rate (f z ) f z = h m x d a p h m = Average chip thickness a p = epth of cut f z = Feed per tooth d = Insert diameter Formula: Average Chip Thickness (h m ) h a m = f z x p d Calculation of the average chip thickness in relation with the a e (Radial Engagement) if a e is less than 50% of ia. Formula: Program Feed Rate (f z ) f z = h m x d a e h m = Average chip thickness a e = Radial engagement f z = Feed per tooth d = Cutter diameter Formula: Average Chip Thickness (h m ) h m = f z x a e d 8
7713VR10 Technical Information With round inserts, the thickness of the chip varies depending on the axial depth of cut and is related to the size of the cutting edge preparation. For best tool-life it is important to maintain the proper chip thickness as shown below. Inserts RP..10T3.. Inserts Geometry RPFX-E701X4 RPEX-E701X4 RPHT-E422X4 RPHT-E422X8 RPHT-TX4 RPMW-TX4 432X5 Insert Size Axial d.o.c. imensions (inch) hm min. hm max. 0.394 0.010 0.001 0.003 0.005 0.020 0.394 0.020 0.001 0.003 0.004 0.014 0.394 0.030 0.001 0.003 0.003 0.012 0.394 0.039 0.001 0.003 0.002 0.010 0.394 0.049 0.001 0.003 0.002 0.009 0.394 0.059 0.001 0.003 0.002 0.008 0.394 0.079 0.001 0.003 0.002 0.007 0.394 0.098 0.001 0.003 0.002 0.006 0.394 0.010 0.001 0.004 0.007 0.022 0.394 0.020 0.001 0.004 0.005 0.016 0.394 0.030 0.001 0.004 0.004 0.013 0.394 0.039 0.001 0.004 0.004 0.011 0.394 0.049 0.001 0.004 0.003 0.010 0.394 0.059 0.001 0.004 0.003 0.009 0.394 0.079 0.001 0.004 0.003 0.008 0.394 0.098 0.001 0.004 0.002 0.007 0.394 0.010 0.002 0.006 0.010 0.040 0.394 0.020 0.002 0.006 0.007 0.028 0.394 0.030 0.002 0.006 0.006 0.023 0.394 0.039 0.002 0.006 0.005 0.020 0.394 0.049 0.002 0.006 0.004 0.018 0.394 0.059 0.002 0.006 0.004 0.016 0.394 0.079 0.002 0.006 0.004 0.014 0.394 0.098 0.002 0.006 0.003 0.013 0.394 0.010 0.002 0.006 0.010 0.040 0.394 0.020 0.002 0.006 0.007 0.028 0.394 0.030 0.002 0.006 0.006 0.023 0.394 0.039 0.002 0.006 0.005 0.020 0.394 0.049 0.002 0.006 0.004 0.018 0.394 0.059 0.002 0.006 0.004 0.016 0.394 0.010 0.003 0.007 0.020 0.045 0.394 0.020 0.003 0.007 0.014 0.032 0.394 0.030 0.003 0.007 0.012 0.026 0.394 0.039 0.003 0.007 0.010 0.022 0.394 0.049 0.003 0.007 0.009 0.020 0.394 0.059 0.003 0.007 0.008 0.018 0.394 0.079 0.003 0.007 0.007 0.016 0.394 0.098 0.003 0.007 0.006 0.014 0.394 0.010 0.005 0.007 0.032 0.047 0.394 0.020 0.005 0.007 0.023 0.033 0.394 0.030 0.005 0.007 0.019 0.027 0.394 0.039 0.005 0.007 0.016 0.024 0.394 0.049 0.005 0.007 0.014 0.021 0.394 0.059 0.005 0.007 0.013 0.019 0.394 0.079 0.005 0.007 0.011 0.017 0.394 0.098 0.005 0.007 0.010 0.015 0.394 0.010 0.002 0.006 0.010 0.040 0.394 0.020 0.002 0.006 0.007 0.028 0.394 0.030 0.002 0.006 0.006 0.023 0.394 0.039 0.002 0.006 0.005 0.020 0.394 0.049 0.002 0.006 0.004 0.018 0.394 0.059 0.002 0.006 0.004 0.016 0.394 0.079 0.002 0.006 0.004 0.014 fz min. fz max. 9
7713VR12 Technical Information With round inserts, the thickness of the chip varies depending on the axial depth of cut and is related to the size of the cutting edge preparation. For best tool-life it is important to maintain the proper chip thickness as shown below. Inserts RP..1204.. Inserts Geometry RPHT-701X4 RPHT-442X4 RPHT-442X5 432X5 RPHT-SGX5 SGX5 RPHT-442X8 432X8 RPHT-SGX8 SGX8 RPHT-TX4 RPMW-TX4 Insert Size Axial d.o.c. imensions (inch) hm min. hm max. 0.472 0.010 0.001 0.004 0.005 0.030 0.472 0.020 0.001 0.004 0.004 0.021 0.472 0.039 0.001 0.004 0.003 0.015 0.472 0.059 0.001 0.004 0.002 0.012 0.472 0.079 0.001 0.004 0.002 0.011 0.472 0.098 0.001 0.004 0.002 0.009 0.472 0.118 0.001 0.004 0.002 0.009 0.472 0.138 0.001 0.004 0.001 0.008 0.472 0.010 0.002 0.008 0.016 0.055 0.472 0.020 0.002 0.008 0.012 0.039 0.472 0.039 0.002 0.008 0.008 0.027 0.472 0.059 0.002 0.008 0.007 0.022 0.472 0.079 0.002 0.008 0.006 0.019 0.472 0.098 0.002 0.008 0.005 0.017 0.472 0.118 0.002 0.008 0.005 0.016 0.472 0.138 0.002 0.008 0.004 0.015 0.472 0.010 0.002 0.008 0.016 0.055 0.472 0.020 0.002 0.008 0.012 0.039 0.472 0.039 0.002 0.008 0.008 0.027 0.472 0.059 0.002 0.008 0.007 0.022 0.472 0.079 0.002 0.008 0.006 0.019 0.472 0.098 0.002 0.008 0.005 0.017 0.472 0.010 0.004 0.009 0.027 0.060 0.472 0.020 0.004 0.009 0.019 0.042 0.472 0.039 0.004 0.009 0.014 0.030 0.472 0.059 0.004 0.009 0.011 0.024 0.472 0.079 0.004 0.009 0.010 0.021 0.472 0.098 0.004 0.009 0.009 0.019 0.472 0.010 0.002 0.008 0.016 0.055 0.472 0.020 0.002 0.008 0.012 0.039 0.472 0.039 0.002 0.008 0.008 0.027 0.472 0.059 0.002 0.008 0.007 0.022 0.472 0.010 0.004 0.009 0.027 0.060 0.472 0.020 0.004 0.009 0.019 0.042 0.472 0.039 0.004 0.009 0.014 0.030 0.472 0.059 0.004 0.009 0.011 0.024 0.472 0.010 0.004 0.008 0.027 0.057 0.472 0.020 0.004 0.008 0.019 0.041 0.472 0.039 0.004 0.008 0.014 0.029 0.472 0.059 0.004 0.008 0.011 0.023 0.472 0.079 0.004 0.008 0.010 0.020 0.472 0.098 0.004 0.008 0.009 0.018 0.472 0.118 0.004 0.008 0.008 0.017 0.472 0.138 0.004 0.008 0.007 0.015 0.472 0.010 0.005 0.009 0.035 0.060 0.472 0.020 0.005 0.009 0.025 0.042 0.472 0.039 0.005 0.009 0.018 0.030 0.472 0.059 0.005 0.009 0.014 0.024 0.472 0.079 0.005 0.009 0.013 0.021 0.472 0.098 0.005 0.009 0.011 0.019 0.472 0.118 0.005 0.009 0.010 0.017 0.472 0.138 0.005 0.009 0.009 0.016 fz min. fz max. 10
C WORL HEAQUARTERS Kennametal Inc. 1600 Technology Way Latrobe, PA 15650 USA Tel: 800.446.7738 (United States and Canada) E-mail: ftmill.service@kennametal.com EUROPEAN HEAQUARTERS Kennametal Europe GmbH Rheingoldstrasse 50 CH 8212 Neuhausen am Rheinfall Switzerland Tel: +41 52 6750 100 E-mail: neuhausen.info@kennametal.com ASIA-PACIFIC HEAQUARTERS Kennametal Singore Pte. Ltd. 3A International Business Park Unit #01-02/03/05, ICON@IBP Singore 609935 Tel: +65 6265 9222 E-mail: k-sg.sales@kennametal.com INIA HEAQUARTERS Kennametal India Limited CIN: L27109KA1964PLC001546 8/9th Mile, Tumkur Road Bangalore - 560 073 Tel: +91 80 2839 4321 or +91 080 43281444 E-mail: bangalore.information@kennametal.com Kennametal Inc. 1600 Technology Way Latrobe, PA 15650 USA 2015 Kennametal Inc. l All rights reserved. l A-14-04200EN_in