Twist drills, ground Twist drills DIN 338/HSS type N point angle 8, spiral angle 25-35, Ø-tolerance h 8, of HSS, for drilling of steel, steel-casting alloyed and unalloyed up to approx. 900 N/mm² strength grey- and tempered casting, sinter iron, newsilver, graphit, alu-alloy, bronze and brass Packaging unit in blister pack: 0,5-3,0 mm; SPU = 3 pieces 3,2-6,0 mm; SPU = 2 pieces 6,5-3,0 mm; SPU = piece xxxxxx/co = Cobalt Art. no. Ø core-hole SL TL PU 230220 87 33 230220/CO 230230,5 94 42 230230/CO 230240 2 M4 0 5 230240/CO 230244 2,5 0 5 230244/CO 230250 3 0 5 230250/CO Art. no. Ø core-hole SL TL PU 23000 0,5 6 22 230020 2 34 230020/CO 230030,5 8 40 230030/CO 230032,6 M2 20 43 230032/CO 230040 2 24 49 230040/CO 230050 2,5 M3 30 57 230050/CO 230060 3 33 6 230060/CO 230064 3,2 36 65 230064/CO 230066 3,3 M4 36 65 230066/CO 230070 3,5 39 70 230070/CO 230080 4 43 75 230080/CO 230084 4,2 M5 43 75 230084/CO 230090 4,5 47 80 230090/CO 23000 5 M6 52 86 23000/CO 2300 5,5 57 93 2300/CO 23020 6 M7 57 93 23020/CO 23030 6,5 63 0 23030/CO 23036 6,8 M8 69 0 23036/CO 23040 7 69 09 23040/CO 23060 8 75 7 23060/CO 23070 8,5 M0 75 7 23070/CO 23080 9 8 25 23080/CO 23090 9,5 8 25 23090/CO 230200 0 87 33 230200/CO 230204 0,2 M2 87 33 230204/CO 23020 0,5 87 33 23020/CO Twist drills DIN 338/HSS type N made from hight power steel, in plastic pocket Technical information: Standard version: Industrial quality, dressed to size from solid material, high true tuning precision, long tool life, cutter separate packet in plastic bags or as a in a box. /PB: as beside /R: workshop quality, wheeled milled /TIN: as beside, titanium nitride coating 23032-0 9-pieces 0,32 23032/R - 0 0,284 23032/TIN - 0 0,345 23034-3 25-pieces,270 23034/R - 3,23 23034/TIN - 3,290 Bulk storage chest for twist drills HSS, DIN 338, 70 pieces, TYP N, short, ground, bright, with split point, TIN coated. Contents:.0-0.0 mm (upstairs in 0.5 mm steps) up to 8,0 mm 0 pieces/size > 8,5 mm 5 pieces/size 23030/TIN 70-pieces 4,550 266
Drills Auger bit, type Lewis Drills Masonry drills DIN 8039 carbide tipped, with straight shank, each piece in plastic pocket 23502 460 6 0,005 23508 235 0 0,098 2356 235 4 0,005 23524 235 8 0,200 23526 460 8 0,468 23528 235 20 0,005 23530 460 20 0,005 23532 235 22 0,300 23534 460 22 0,642 23540 235 26 0,005 23544 235 28 0,005 23546 460 28 0,005 Drill type machine bits for wood made from carbon steel, concentrically ground, with centre point and front cutter 23066 70 3 0,005 23068 80 4 0,008 230620 90 5 0,0 230622 00 6 0,05 230626 20 8 0,03 230628 30 9 0,039 230630 37 0 0,047 230634 50 2 0,075 230636 70 3 0,088 Flat bits with flat cutter head, square shank, DIN 6447 A shank 230732 50 0 6 0,04 230734 50 2 6 0,04 230736 50 4 6 0,048 230738 50 6 6 0,05 230740 50 8 6 0,047 230742 50 20 6 0,045 230746 50 24 6 0,045 Casing drill With cylindrical clamping shaft, cutting element made of chrome vanadium steel 23750 400 6 0,00 23752 400 8 0,005 23754 400 0 0,60 23756 400 2 0,200 23758 400 3 0,200 23760 400 7 0,005 23766 400 22 0,200 230330 70 3 40 0,003 23033 75 3,5 45 0,056 230332 80 4 45 0,008 230334 85 4,5 50 0,008 230336 90 5 50 0,0 230338 95 5,5 55 0,02 230340 00 6 60 0,08 230342 05 6,5 65 0,08 230344 0 7 65 0,08 230346 20 8 70 0,027 230352 40 0 90 0,035 230354 50 95 0,082 230356 60 2 05 0,090 230358 70 3 0 0,00 230360 80 4 5 0,20 230362 90 5 25 0,65 230364 90 6 25 0,092 Masonry drills DIN 8039 carbide tipped, with straight shank, each piece in plastic pocket 230370 400 8 300 0,30 230372 400 0 300 0,24 230374 400 2 300 0,43 230376 400 4 300 0,36 230378 400 6 300 0,232 230380 400 8 300 0,460 230382 400 20 300 0,608 230400 600 8 500 0,222 230402 600 0 500 0,222 230404 600 2 500 0,330 230406 600 4 500 0,463 230408 600 6 500 0,568 23040 600 8 500 0,75 23042 600 20 500 0,896 23044 600 22 500,64 Masonry drill bit High-Helix Masonry drill bit, sand blasted, countersink construction, professional quality 23700 70 3 0,007 23702 85 4 0,0 23704 95 5 0,07 23706 00 6 0,08 23708 00 7 0,020 2370 20 8 0,027 2372 20 9 0,030 2374 20 0 0,035 2376 50 0,090 2378 50 2 0,00... convincing solutions Germany: HAUPA, Koenigstr. 65-69, 42853 Remscheid, Phone: +49 (0)29 848-0, Fax: +49 (0)29 848-840, sales@haupa.com 267
Drills SDS hammer drill bits Top quality: SDS-Plus fast fitting system: 2 lengthwise slots and 2 round slots at the end of the shank. Universal tool fitting for different types of hammer drills according to the SDS-Plus system SDS hammer drill bits Workshop quality: SDS-Plus fast fitting system: 2 lengthwise slots and 2 round slots at the end of the shank. Universal tool fitting for different types of hammer drills according to the SDS-Plus system 230430 0 5 50 0,037 23043 60 5 00 0,042 230432 0 5,5 50 0,037 230433 60 5,5 00 0,045 230434 0 6 50 0,039 230436 60 6 00 0,045 230438 0 6,5 50 0,038 230438/A 60 7 00 0,050 230438/B 60 6,5 00 0,047 230440 0 7 50 0,04 230442 0 8 50 0,046 230442/A 60 8 00 0,056 230444 20 8 50 0,064 230444/A 460 8 400 0,50 230448 60 0 00 0,065 230450 20 0 50 0,087 230450/A 260 0 50 0,8 23045 460 0 400 0,92 230453 20 2 50 0,07 230454 60 2 00 0,097 230456 260 2 200 0,59 230457 460 2 400 0,263 230458 60 3 85 0, 230459 600 2 540 0,286 230460 60 4 00 0,087 230460/A 260 4 200 0,7 23046 460 4 400 0,257 230464 20 6 50 0,97 230466 460 6 400 0,48 230467 600 4 540 0,339 230473 600 6 540 0,56 230474 20 20 50 0,246 230475 460 8 400 0,475 230478/ 600 0 540 0,270 230395 460 20 400 0,585 230396 600 20 540 0,737 230397 460 22 400 0,669 230398 460 25 400 0,998 SDS-Nut-hammer drill s Contents: 5, 6, 8 x 0 / 6, 8, 0, 2 x 60 230900 0 5 50 0,036 230902 60 5 00 0,042 230904 0 5,5 50 0,036 230906/ 60 5,5 00 0,043 230908 0 6 50 0,040 23090 60 6 00 0,045 23092 0 6,5 50 0,04 23094 60 6,5 00 0,045 23096 0 7 50 0,040 23098 60 7 00 0,045 230920 0 8 50 0,045 230922 60 8 00 0,055 230924 20 8 50 0,067 230926 60 0 00 0,068 230928 20 0 50 0,095 230930/ 260 0 50 0,07 230932 450 0 400 0,55 230934 600 0 540 0,365 230936 260 20 0,070 230938 60 2 00 0,077 230940 20 2 50 0,06 230942 30 2 260 0,20 230944 460 2 400 0,250 230946 600 2 540 0,35 230948 60 3 00 0,085 230950 60 4 00 0,200 230952 260 4 20 0,250 230954/ 460 4 400 0,300 230956 600 4 540 0,365 230958 60 5 00 0,20 230960 20 6 50 0,95 230962/ 460 6 400 0,346 230964 600 6 540 0,48 230966 200 8 40 0,80 230968 460 8 400 0,395 230970 20 20 50 0,22 230972 30 20 250 0,383 230974 460 20 400 0,503 230976 460 22 400 0,583 230978 460 25 400 0,753 SDS-hammer drill s Contents: 5, 6 x 0, 6, 8, 0 x 60 230479 7-pieces 0,679 230979 5-pieces 0,26 268
Step drills Combination step drills/hss for metric PG rough thread-through-hole and core-hole-drillings, 6 drilling diameters for core-hole with 5 mm step for sheet metal up to max. 6 mm. Through-hole: 8,5 2,5 6,5 20,5 25,5 32,5 40,5 mm core-hole: 0,5 (M2) 4,5 (M6) 8,5 (M20) 23,5 (M25) 30,5 (M32) 38,5 (M40) special type for electric assembly, for sheet steel up to 4 mm thickness, for amoured conduit thread sizes 23320 7 29 0,237 23322 7 2 0,5 2339 8,5 40,5 0,269 Special type for electric assembly, for sheet metal up to max. 4 mm gauge, for metric thread through-hole drilling, 8,5 2,5 6,5 20,5 25,5 32,5 40,5 mm 23324 8,5 40,5 0,99 thickness up to max. 6 mm, for metric core-hole-drilling, 8,5-0,5-4,5-8,5-23,5-30,5 mm for mechanical engineering and tinsmith working, with 2 cutters, metric Art. no. shank min./ø max./ø 23336 6 4 2 0,027 23338 9 2 20 0,079 23340 2 20 30 0,203 23342 2 30 40 0,37 23350 6 4 2 0,027 23352 8 4 20 0,059 23354 0 6 30 0,62 Step drills assortiment/hss 3 pieces, for mechanical engineering and tinsmith working, with 2 cutters. Contents: Ø 4-2 mm, Ø 2-20 mm, Ø 20-30 mm 23326 8,5 30,5 0,208 PDF 23327 4-30 3-pieces 0,597 Rotary guide value for step drills/cone drills Material unleg. Baustahl unleg. Baustahl leg. Stahl Gußeisen Gußeisen Material Edelstahl CuZn Leg. CuZn Leg. AL Leg. Thermo- Duro- Holz < 700 N/mm 2 > 700 N/mm 2 < 000 N/mm 2 < 250 N/mm 2 > 250 N/mm 2 rostfrei spröde zäh < % Si plaste plaste Mild steel Mild steel Alloy steel Cast iron Cast iron Stainless CuZn alloy CuZn alloy Alloy steel Thermo Duro Wood < 700 N/mm 2 > 700 N/mm 2 < 000 N/mm 2 < 250 N/mm 2 > 250 N/mm 2 steel brittle tough < % Si plastic plastic Material gauge 6,0 mm 6,0 mm 6,0 mm 6,0 mm 6,0 mmmaterial 3,0 gauge mm 6,0 mm 6,0 mm 6,0 mm 6,0 mm 6,0 mm 25,0 mm Kühlung Bohrpaste Bohrpaste Bohrpaste Luft Luft Bohrpaste Bohrpaste Luft Luft Bohrpaste H 2 O Luft Luft Lubricant Drilling paste Drilling paste Drilling paste Air Air Lubricant Drilling paste Air Air Drilling paste H 2 O Air Air Vc = m / min 25 20-25 20 5 0 m / min 5 60 35 30 20 5 > 40 U/min U/min U/min U/min U/min U/min U/min U/min U/min U/min U/min U/min ø mm r.p.m r.p.m r.p.m r.p.m r.p.m ø mmr.p.m r.p.m r.p.m r.p.m r.p.m r.p.m r.p.m 4,0-2,0 900-600 700-580 550-520 90-400 800-250 4,0 400-2,0-30 4700-550 2750-920 2350-790 550-520 90-400 3000-000 4,0-20,0 900-400 700-350 550-300 90-240 800-60 4,0 400-20,0-80 4700-950 2750-550 2350-470 550-300 90-240 3000-650 2,0-20,0 600-400 600-350 520-300 400-240 250-60 2,0 30-20,0-80 550-950 920-550 790-470 520-300 400-240 000-650 4,0-24,0 900-300 700-280 550-250 90-200 800-30 4,0 400-24,0-65 4700-790 2750-460 2350-400 550-250 90-200 3000-550 6,0-30,0 300-250 200-230 000-200 780-50 530-00 6,0 250-30,0-50 350-630 850-370 590-30 000-200 780-50 200-420 20,0-30,0 400-250 350-230 300-200 230-50 60-00 20,0-80 30,0-50 950-630 550-370 470-30 300-200 230-50 650-420 6,0-36,0 300-220 200-200 000-70 780-30 530-90 6,0 250-36,0-45 350-530 850-300 590-260 000-70 780-30 200-350 30,0-40,0 250-200 230-80 200-50 50-20 00-80 30,0-50 40,0-40 630-470 370-280 30-240 200-50 50-20 420-30 40,0-50,0 200-60 80-40 50-25 20-90 80-65 30,0-40,0-30 470-380 280-220 240-90 50-25 20-90 30-250 50,0-60,0 60-30 40-0 25-00 90-80 65-50 30,0-30 40,0-25 380-30 220-85 90-50 25-00 90-80 250-20... convincing solutions Germany: HAUPA, Koenigstr. 65-69, 42853 Remscheid, Phone: +49 (0)29 848-0, Fax: +49 (0)29 848-840, sales@haupa.com 269
Cone drills Cone drills/aerial drills/hss for edgefree drilling of thin material Screw punches Screw punches matching for cable connection acc. the new Euro-Norm EN 50262, with 3 cutting edges for iron sheet up to 2 mm, steel sheet up to,5 mm, stainlesssteel sheet up to,5 mm thickness Art. no. shank min./ø max./ø 23300 6 3 4 0,027 2330 8 6 20 0,055 23330 8 6 22,5 0,085 23302 0 6 30 0,39 23304 2 26 40 0,265 23305 0 6 30 0,66 23306 2 36 50 0,350 23307 3 46 60 0,55 Set of cone drills/hss 3 pieces, in metal box. piece each No., 2, 3 (Ø 3-30 mm), suitable for NE material, soft steel sheet, similar to ST 4-37, Nirosta steel sheet A 2, for duro or thermo plastic Art. no. screws 8053 metric ISO 6 80530 0,0 8055 metric ISO 20 80530 0,5 8057 metric ISO 25 80530 0,54 8059 metric ISO 32 80532 0,320 8052 metric ISO 40 80532 0,950 80523 metric ISO 50 80534 0,636 80525 metric ISO 63 80534 0,974 80500 PG PG9 80530 0,097 80502 PG PG 80530 0,06 80504 PG PG3,5 80530 0,5 80506 PG PG6 80530 0,00 80508 PG PG2 80530 0,76 8050 PG PG29 80532 0,400 8052 PG 30,5 80534 0,202 8054 PG PG36 80534 0,590 8056 PG PG42 80534,250 8058 PG PG48 80534 0,39 80520 PG /8" 80530 0,250 Spare screws Spare screws for screw punches 2332 3-30 3-pieces 0,50 Art. no. size 80530 0 x,0 0,048 80532 2 x,5 0,070 80534 6 x,5 0,39 PDF Rotary guide value for step drills/cone drills Material unleg. Baustahl unleg. Baustahl leg. Stahl Gußeisen Gußeisen Material Edelstahl CuZn Leg. CuZn Leg. AL Leg. Thermo- Duro- Holz < 700 N/mm 2 > 700 N/mm 2 < 000 N/mm 2 < 250 N/mm 2 > 250 N/mm 2 rostfrei spröde zäh < % Si plaste plaste Mild steel Mild steel Alloy steel Cast iron Cast iron Stainless CuZn alloy CuZn alloy Alloy steel Thermo Duro Wood < 700 N/mm 2 > 700 N/mm 2 < 000 N/mm 2 < 250 N/mm 2 > 250 N/mm 2 steel brittle tough < % Si plastic plastic Material gauge 6,0 mm 6,0 mm 6,0 mm 6,0 mm 6,0 mmmaterial 3,0 gauge mm 6,0 mm 6,0 mm 6,0 mm 6,0 mm 6,0 mm 25,0 mm Kühlung Bohrpaste Bohrpaste Bohrpaste Luft Luft Bohrpaste Bohrpaste Luft Luft Bohrpaste H 2 O Luft Luft Lubricant Drilling paste Drilling paste Drilling paste Air Air Lubricant Drilling paste Air Air Drilling paste H 2 O Air Air Vc = m / min 25 20-25 20 5 0 m / min 5 60 35 30 20 5 > 40 U/min U/min U/min U/min U/min U/min U/min U/min U/min U/min U/min U/min ø mm r.p.m r.p.m r.p.m r.p.m r.p.m ø mmr.p.m r.p.m r.p.m r.p.m r.p.m r.p.m r.p.m 4,0-2,0 900-600 700-580 550-520 90-400 800-250 4,0 400-2,0-30 4700-550 2750-920 2350-790 550-520 90-400 3000-000 4,0-20,0 900-400 700-350 550-300 90-240 800-60 4,0 400-20,0-80 4700-950 2750-550 2350-470 550-300 90-240 3000-650 2,0-20,0 600-400 600-350 520-300 400-240 250-60 2,0 30-20,0-80 550-950 920-550 790-470 520-300 400-240 000-650 4,0-24,0 900-300 700-280 550-250 90-200 800-30 4,0 400-24,0-65 4700-790 2750-460 2350-400 550-250 90-200 3000-550 6,0-30,0 300-250 200-230 000-200 780-50 530-00 6,0 250-30,0-50 350-630 850-370 590-30 000-200 780-50 200-420 20,0-30,0 400-250 350-230 300-200 230-50 60-00 20,0-80 30,0-50 950-630 550-370 470-30 300-200 230-50 650-420 6,0-36,0 300-220 200-200 000-70 780-30 530-90 6,0 250-36,0-45 350-530 850-300 590-260 000-70 780-30 200-350 30,0-40,0 250-200 230-80 200-50 50-20 00-80 30,0-50 40,0-40 630-470 370-280 30-240 200-50 50-20 420-30 40,0-50,0 200-60 80-40 50-25 20-90 80-65 30,0-40,0-30 470-380 280-220 240-90 50-25 20-90 30-250 50,0-60,0 60-30 40-0 25-00 90-80 65-50 30,0-30 40,0-25 380-30 220-85 90-50 25-00 90-80 250-20 270