Trak-It /Stick-E TM SPECIFICATION & DESIGN MANUAL TM Stick-E Electrical and Mechanical Fastening System PRODUCT DESCRIPTION The Stick-E fastening system uses Trak-It gas technology with specially designed accessories for fastening applications encountered by electricians and mechanical contractors. The Stick-E fastening system eliminates drilling and anchoring by offering the ability to fasten directly through the fixture with the magazine pins and accessories. Operation of a gas powered fastening system does not require special safety training or licensing. GENERAL APPLICATIONS AND USES Fastening electrical boxes to concrete walls Hanging duct work straps Suspending threaded rod Suspending Conduit, BX Cables and electrical wiring Securing rebar Installing insulation and lathing material FEATURES AND BENEFITS Fast, safe and easy to use No licensing required Nose of tool fits in narrow channel 30,000 to 50,000 shots before cleaning is necessary APPROVALS AND LISTINGS International Code Council, Evaluation Service (ICC-ES) ER-6157 City of Los Angeles (COLA) Research Report LARR-25523 GUIDE SPECIFICATIONS CSI Divisions: 03151-Concrete Anchoring, 04081-Masonry Anchorage and 05090-Metal Fastenings and 09051-Fastenings. Power-actuated fastening system shall be Stick-E as supplied by Powers Fasteners, Inc., Brewster, NY. TOOL SPECIFICATIONS Trak-It C3-ST Tool Tool Length 13" Tool Weight 7 lbs Pin Length Range 1/2" to 1 1/2" Pin Capacity 22 Approximate Shots per Fuel Cell 1,000 Approximate Shots per Battery Charge 5,700 SECTION CONTENTS Page No. General Information... 340 Tool Specifications... 340 Pin Specifications... 340 Applications Guide... 341 Performance Data... 343 Ordering Information... 344 Trak-It C3-ST Tool (Short Track) SUITABLE BASE MATERIALS Normal-Weight Concrete Structural Lightweight Concrete Hollow and Grouted CMU Brick Masonry Steel PIN SPECIFICATIONS Fasteners for Trak-It C3-ST Tool Fastener Available Lengths Shank Diameter Material Hardness Finish Standard Pins with 3/4" Break-free Collation 1" ASTM B695, Class 5, Type I 0.102" AISI 1060 to 1065 Rockwell Hardness 51 to 55 (Smooth Shank with Rolled Point) 1 1/4" (Except 3/4" pin which is Black Oxide Finish) 1 1/2" Perma-Seal Coated Standard Pins 3/4" (Smooth Shank with Rolled Point) 1" 0.102" AISI 1060 to 1065 Rockwell Hardness 51 to 55 Perma-Seal coated Stick-E Pin 3/4" (Step Shank) 1" 0.102"/0.088" AISI 1060 to 1065 Rockwell Hardness 51 to 55 ASTM B695, Class 5, Type I Tool is compatible with all Trak-It C3 pins. 340 www.powers.com Canada: (905) 673-7295 or (514) 631-4216 Powers USA: (800) 524-3244 or (914) 235-6300
SPECIFICATION & DESIGN MANUAL Trak-It /Stick-E TM APPLICATIONS GUIDE Cable Tie Donut Application For attaching small and large diameter cable ties to all types of walls and ceilings including wood, steel beams, concrete and block. Ideal for strapping wires and cable for hanging temporary lighting fixtures from all base materials. (fits ties up to 1/4"wide.) Mini Conduit Clip Application For attaching conduit and piping to steel beams, wood and concrete ceilings. Conduit Clip (One Hole Strap) Application For attaching conduit and light duty pipe to walls and ceilings of any base material including wood, steel beams, concrete and steel purlins. Bridal Ring Application For suspending single or multiple wires and cable in runs from overhead ceilings of all base materials including wood, steel beams, concrete and steel purlins. BX Clip Application For attaching BX cable to walls and ceilings of any base material including wood, steel beams, concrete and steel purlins. Contractor(s) Cable Installers, Telecommunication Installers, Electricians Strap Washer Application For attaching duct straps to suspend HVAC ductwork onto ceiling of various base materials. Contractor(s) Sheet Metal Contractors Rebar Basket Clip Application For attaching rebar to existing concrete or wood forms prior to a pour. Most popular in road and bridge construction and repair. Contractor(s) Concrete Contractors Rod Hanger Application Attaching rod overhead to steel beams, wood or concrete ceilings for the purpose of suspending utilities, cable trays, conduit and pipe., Plumbers, Mechanical Contractors Powers USA: (800) 524-3244 or (914) 235-6300 Canada: (905) 673-7295 or (514) 631-4216 www.powers.com 341
Trak-It /Stick-E TM SPECIFICATION & DESIGN MANUAL APPLICATIONS GUIDE Right Angle Clip Application For suspending acoustical ceiling systems or light fixtures. Contractor(s) Acoustical and Ceiling Contractors Insulation Washer Application For attaching exterior foam insulation to all base materials including wood, steel and concrete. Contractor(s) Insulation Contractors, Waterproofers 1 1/4" Break Free Rolled Point Trak-It Pins (most base materials) 1 1/2" Break Free Rolled Point Trak-It Pins (most base materials) Lathing Washer Application For attaching wire lathe to wood, steel, concrete or block for the purpose of troweling stucco in exterior applications or plaster in interior applications. Can also be used as a general purpose washer. Contractor(s) Drywall, Plaster, Exterior Siding Contractors 1" Break Free Rolled Point Trak-It Pins (most base materials) 1 1/4" Break Free Rolled Point Trak-It Pins (most base materials) Stainless Steel Sealing Washer Application For attaching waterproofing membrane to foundations and roofing applications. Contractor(s) Insulation Contractors, Waterproofers, Roofers Suggested Pin Size (s) 3/4" Perma-Seal Coated Rolled Point Trak-It Pins (most base materials) 1" Perma-Seal Coated Rolled Point Trak-It Pins (most base materials) 342 www.powers.com Canada: (905) 673-7295 or (514) 631-4216 Powers USA: (800) 524-3244 or (914) 235-6300
SPECIFICATION & DESIGN MANUAL Trak-It /Stick-E TM PERFORMANCE DATA Ultimate Load Capacities for Stick-E Accessories Installed with 780 Pin into Concrete, Concrete Block, or Lightweight Concrete over Metal Deck 1 Embed. Depth Ultimate Load Stick-E h v Tension Conduit Clip BX Clip Bridal Ring Cable Tie Insulation Washer Rebar Clip Strap Washer Rod Hanger 1. 2,000 psi Concrete or Concrete Block at time of installation. 3/4 640 400 (19.1) (2.85) (1.78) 3/4 640 (19.1) (2.85) Ultimate Load Capacities for Stick-E Accessories Installed with 780 Pin into A36 and A572 Steel Ultimate Load A36 Steel A572 Steel A572 Steel Embedment Stick-E Depth (3/16" Thick) (1/8" Thick) (12 Gage) h v Tension Tension Tension Conduit BX Clip Bridal Ring Cable Tie Strap Washer Rod Hanger 3/4 650 450 300 (19.1) (2.89) (2.00) (1.33) Ultimate Load Capacities for Channel/Strut Mounted Installed with Stick-E 780 Pin into Concrete or Concrete Block 1,2,3 Trak-It Pin 780 Embed. Depth h v 9/16 (19.1) Number of Pins (Per Foot Length) 1. Installations for Nominal 1-5/8 Channel (12 Gage), All Finishes. 2. 2,000 psi Concrete of Concrete Block at time of installation. 3. Maximum spacing is center to center * Fits all channel configurations ** Fits all channel configurations except slotted 3 5 Maximum Spacing Tension Ultimate Load (lbs/ft) Vertical Axis Horizontal Axis 4* 625 570 1,170 (101.9) (9.12) (8.32) (17.07) 2.5** 1,025 1,190 2,110 (63.70) (14.96) (17.37) (30.79) Powers USA: (800) 524-3244 or (914) 235-6300 Canada: (905) 673-7295 or (514) 631-4216 www.powers.com 343
Trak-It /Stick-E TM SPECIFICATION & DESIGN MANUAL PERFORMANCE DATA Electrical Boxes Mounted Installed with Stick-E 780 Pin into Concrete or Concrete Block 1,2 Trak-It Pin 780 Embed. Depth h v Number of Pins (Per Box) Maximum Spacing Fastening Pattern Tension Ultimate Load Vert. Axis Horiz. Axis 2 1 Line 640 975 850 (25.5) (2.85) (4.34) (3.78) 5/8 3 2 Triangle 720 1,115 1,055 (15.9) (50.9) (3.20) (4.96) (4.69) 4 2 Square/Diamond 900 1,840 1,840 (50.9) (4.00) (8.18) (8.18) 1. Installations for Nominal 16 Gage Electrical Boxes, All Finishes. 2. 2,000 psi Concrete of Concrete Block at time of installation. ORDERING INFORMATION Stick-E Mini Conduit Clip 55064 Mini Conduit Clip 1/2" 100 1,000 55066 Mini Conduit Clip 3/4" 100 1,000 55068 Mini Conduit Clip 1" 100 1,000 Stick-E Cable Tie Donut 55076 Cable Tie Donut 100 1,000 Stick-E Conduit Clip (One Hole Strap) 55059 Conduit Clip 1/2" 100 1,000 55061 Conduit Clip 3/4" 100 1,000 Stick-E BX Clip 55054 Stick-E 3/8" BX Clips 100 1,000 Stick-E Bridal Ring 55094 Bridal Ring 1 1/4" 100 1,000 55095 Bridal Ring 1 1/2" 100 1,000 55096 Bridal Ring 2" 100 1,000 Stick-E Strap Washer 55062 Strap Washer 1/2" Diameter 100 1,000 Stick-E Rod Hanger 55050 Rod Hanger 1/4" 100 1,000 55052 Rod Hanger 3/8" 100 1,000 Stick-E Rebar Basket Clip 55070 #3 and #4 Bar 100 1,000 344 www.powers.com Canada: (905) 673-7295 or (514) 631-4216 Powers USA: (800) 524-3244 or (914) 235-6300
SPECIFICATION & DESIGN MANUAL Trak-It /Stick-E TM ORDERING INFORMATION Stick-E Right Angle Clip 55092 Right Angle Clip (Wirehole 0.278") 100 1,000 Stick-E Insulation Washer 55042 Insulation Washer 1 7/16" 100 1,000 Stick-E Lathing Washer 55040 Lathing Washer 1" with holes 100 1,000 Stick-E Stainless Steel Sealing Washer 55043 SS Sealing Washer 3/4" 100 1,000 Stick-E Pin (Step Shank) Cat. No. Description Shank Diameter Standard Box Standard Carton 55080 780 (3/4") Step Shank Pins (K) 0.102"/0.088" 1,000 5,000 55081 1" Step Shank Pin 0.102"/0.088" 1,000 5,000 (K) = Knurled Standard Pins with Break-free Collation (Smooth Shank with Rolled Point) Cat. No. Description Shank Diameter Standard Box Standard Carton 55032 3/4" Black 0.102" 1,000 5,000 55033 1" Zinc 0.102" 1,000 5,000 55034 1 1/4" Zinc 0.102" 1,000 5,000 55035 1 1/2" Zinc 0.102" 1,000 5,000 Designed for use in concrete and masonry. All pins are zinc plated or coated with black oxide for a minimum level of corrosion resistance. Plastic collation breaks completely free of pin during installation. Each box of pins come packaged with one fuel cell. Perma-Seal Coated Standard Pins Cat. No. Description Shank Diameter Standard Box Standard Carton 55038 3/4" Perma-Seal 0.102" 1,000 5,000 55039 1" Perma-Seal 0.102" 1,000 5,000 Perma-Seal coated pins are designed for use in areas where a greater level of corrosion resistance is required. Each box of pins come packaged with one fuel cell. Trak-It Tools 55002 C3-ST Trak-It 1 1 Tool comes with case, charger and two batteries. Stick-E accessories are compatible with Trak-It C3 tools. Trak-It Fuel Cell 55010 Trak-It Fuel Cell 20 80 Trak-It Pole Tools 55048 6' Pole Tool 1 1 55051 8' Pole Tool 1 1 Pole tools come complete with Trak-It C3-ST tool (Short Trak tool). 2006 Powers Fasteners, Inc. All Rights Reserved. Trak-It is a registered trademark and Stick-E is a trademark of Powers Fasteners, Inc. Powers USA: (800) 524-3244 or (914) 235-6300 Canada: (905) 673-7295 or (514) 631-4216 www.powers.com 345