DISCONTINUOUS REFINING MILL SMD 800-1200 Double action refining mill (dispersion + milling) with discontinuous operation and wet milling for printing pastes, colorants and ceramic glaze. The belt transmission between motor and milling components, plus the inverter power supply, mean that large quantities of product can be dispersed and refined. Roller iron removers with automatic cleaning for powders and granulated materials. Operating and installation simplicity together with the remarkable specific power of the permanent magnets in Neodymium used to construct the unit, make the CER model the ideal machine for processing large quantities of materials. CER 600-900-1200 Parts in contact with the product made of AISI 304 stainless steel Wear-resistant grinding bodies Grinding spheres in sintered alumina Water cooling Transmission by belt Completely made in stainless steel AISI 304. Automatic cleaning. Permanent magnets, in neodymium DISCONTINUOUS REFINING MILL Technical features SMD 800 SMD 1200 Weight (kg) 1200 1500 Installed power (kw) 37 37 Max. production (Lt/batch) 550 800 Min. grinding time (min) 5 5 Microsphere capacity (kg) 80 80 Sphere diam. (mm) 7-8 7-8 Max. water qty (Lt/h) 2000 2000 Max. water inlet temperature ( C) 20 20 Max. water inlet pressure (bar) 1 1 Technical features 600 900 1200 Electrical power (kw) 0,37 0,37 0,37 Drum length (mm) 600 900 1200 Drum diameter (mm) 300 300 300 Max delivery (t/h) 20 30 40 Magnets power (Gauss) 12000 12000 12000 Weight (kg) 162 190 223 Homogenizing and refining of paste and dyes for silk-screen printing Homogenizing of soluble salts for silk-screen printing Glaze refining On spray-dried powder and transfer Easy to use Easy to install Low maintenance costs 34 35 Simple construction features. High iron removing levels thanks to powerful neodymium magnets. Low maintenance costs.
GLM 1/300 Filter with magnetic bars made of Neodymium, small, modular and easy to clean manually. Ideal for processing limited quantities of atomised and granulated products and dry materials in general. Electromagnetic plate iron remover with automatic cleaning for powders and raw material in set sizes. The machine is designed to be installed on feeding belts of mills (raw materials) or of presses (atomised product and dry milled product). DECTRON 500-600-800-1000 Modular box. Completely made in stainless steel AISI 304 Permanent magnetic bars, in neodimium. Quick clamps - Manual cleaning Automatic cleaning operations Permanent magnets Technical features GLM 1/300 Magnetic power 16.000 Gauss Weight (Kg) kg 10 Nr. of magnetic bars 5 Usable for dry materials (fritte, glaze and row materials) At the mill discharge At the conveyor belt discharge High efficiency Easy installation Without maintenance Technical features 500 600 800 1000 Magnet electrical power (W) 1100 1500 2000 2700 Compressed air consuption (nl/min) 10 10 10 10 Weight (Kg) 650 850 1100 1400 Belt width (mm) 500 600 800 1000 For installation on raw material conveyor belts. Constant efficiency, guaranteed by the automatic cleaning device. Easy installation on existing conveyor belt lines. Highly efficient iron removal thanks to the use of powerful electromagnetic plates. Significant savings on the costs of maintenance and subsequent iron removal procedures. 36 37
PZT 93-253 Iron-removing filter for fluids, operating under pressure and with permanent magnets. The compact size, the remarkable magnetic force of the Neodymium bars and the hermetic seal make the PZT 93-253 filter perfect for use on glazing lines, on service tanks and along glaze transfer piping. Iron-removing filter for fluids, operating under pressure and with permanent magnets. Particularly suitable for use in glaze preparation departments individually or installed on the GRP trolley-mounted units together with the vibrating sieves and transfer pumps. PZT 306 - PZP 200 Tank in AISI 304 stainless steel. Quick closure lid AISI 304 stainless steel tank. Quick closure lid Discharge outlet for quick emptying Technical features PZP 93 PZT 253 Magnetic bars n 3 ø25 n 3 ø25 Max. operating temperature ( C) 80 80 Max. operating pressure (bar) 0,5 0,5 Magnetic power in close field (Gauss) 12.000 12.000 Weight (kg) 3,1 4,8 Glaze iron removing Technical features PZP 200 PZT 306 Magnetic body Pigna FPT 200 Barre in Neodimio Magnetic bars n 6 Ø25 Max. temp. with para rubber joint ( C) 60 60 Max. temp. with EPDM joint ( C) 100 100 Max. operating pressure (bar) 0,5 0,5 Magnetic power in close field (Gauss) 6.000 12.000 Weight (kg) 20 15 Easy to install on glazing lines Excellent iron removing performances Body slip and glaze iron removing Easy to install on glaze transfer lines Excellent iron removing performances 38 39
FPT 1-2 /140 - FPT 1-2/200 Cone-shaped iron-removing filter for fluids equipped with extractable magnetic core to facilitate cleaning. Suitable for controlling recovery water, engobe products, low viscosity glazes and slurry. Electrical gravity iron-removing filter for fluids. It can be used to control recovery water, slurry and glaze. The very high contact surface offered by the grids together with the operating principle guarantee full contact with the fluid to be processed, plus easy cleaning once disconnected. DLG 120-142-205-245-300-350-400 AISI 304 stainless steel tank. Discharge outlet for quick emptying Supply tank with float Electrocoil at direct current Reinforced grids in MAGNETIC STAINLESS STEEL Electrical control panel in IP54. Technical features FPT 1/140 FPT 2/140 FPT 1/200 FPT 2/200 Semi-automatic cleaning pine - Magnetic power in close field 6.000 Gauss Magnetic bars in Neodimium - Magnetic power in close field 12.000 Gauss n 1 ø140 n 2 ø140 n 1 ø200 n 2 ø200 n 4 ø25 n 8 ø25 n 6 ø25 n 12 ø25 Weight (kg) 11 20 10 20 Body slip and glaze iron removing Technical features 120 142 205 245 300 350 400 Electrical power (Watt) 130 220 300 400 600 800 1000 Max Capacity (dm 3 /h) 1200 2500 6000 12000 16000 24000 34000 Weight (Kg) 50 70 95 165 290 440 620 Technical features 205 PLUS 245 PLUS Electrical power (Watt) 650 1000 Max Capacity (dm 3 /h) 9000 12000 Weight (Kg) 154 200 Easy to install on glaze transfer lines Excellent iron removing performances Iron removing for water, slip and glaze lines in ceramic industry PATENTED Good ferromagnetic screening performances. by disconnecting the magnetic field. 40 41
DLP 120-142-205-245-300-350-400 Electrical gravity iron-removing filter for fluids. It can be used to control recovery water, slurry and glaze. The remarkable contact surface offered by the grids, together with the operating principle guarantee full contact with the fluid to be processed, plus easy cleaning once disconnected. Electrical gravity iron-removing filter for fluids. It can be used to control recovery water, slurry and glaze. The remarkable contact surface offered by the grids, together with the operating principle guarantee full contact with the fluid to be processed, plus easy cleaning once disconnected. DLS 205 Female threaded coupling for pressure supply Electrocoil at direct current Reinforced grids in MAGNETIC STAINLESS STEEL Electrical control panel in IP54. Corrosionproof zinc-plated structure. Discharge outlet in stainless steel Electrocoil at direct current Reinforced grids in MAGNETIC STAINLESS STEEL Electrical control panel in IP54. Technical features 120 142 205 245 300 350 400 Electrical power (Watt) 130 220 300 400 600 800 1000 Max. Capacity (dm 3 /h) 1200 2500 6000 12000 16000 24000 34000 Max. operating pressure (bar) 10 10 8 8 6 5 5 Weight (Kg) 52 74 100 180 305 460 650 Technical features 205 PLUS 245 PLUS Electrical power (Watt) 650 1000 Max. Capacity (dm 3 /h) 900 1200 Max. operating pressure (bar) 8 8 Weight (Kg) 180 240 Technical features DLS 205 DLS 205 PLUS Electrical power (Watt) 300 650 Max Capacity (dm 3 /h) 6000 9000 Weight (Kg) 105 148 Iron removing for water, slip and glaze lines in ceramic industry Body slip and glaze lines in ceramic industry Good ferromagnetic screening performances. by disconnecting the magnetic field. Good ferromagnetic screening performances in case of medium-sized impurities by disconnecting the magnetic field 42 43
PUMPS FOR ABRASIVE FLUIDS Centrifugal pumps with vertical axle DEMAG 255-405 - (805 only version PLUS) Iron-remover for fluids with automatic cleaning. The amazing strength of the permanent magnets made of Neodymium used to construct the rollers and the exclusive automatic cleaning system make the DEMAG iron-remover the most effective unit for controlling ceramic slurry. The vertical centrifugal pumps, model EGV, are manufactured especially for transferring highly abrasive fluids such as slurry, glaze, water with suspended solids etc. The shaft is guided by bearings outside the tank, ensuring reduced maintenance even in the presence of abrasive fluids. The pump casing and the impeller are lined with special synthetic wear-resistant materials. The use of open impellers enables the transfer of large bodies without clogging. EGV-T / EGV-D-G Contact parts made in AISI 304 stainless steel Automatic cleaning operations Permanent magnets Technical features 255 405 805 PLUS Electrical power (Kw) 0,37+0,18 0,37+0,18 0,55 + 0,18 Magnet nom. power (gauss) 12000 12000 16000 Cleaning water consumption (l/h) 120 240 240 Weight (Kg) 280 310 594 Max. capacity (l/h) 12000 18000 36000 At vibrating sieve discharge At mill discharge After storage tanks Liquid iron removing Body: painted cast iron Supports: cast iron + carbon steel Coatings: anti-wear rubber (*) Power referred to water at the maximum flow rate Technical features 3X 3Y 4X 4Y 5X 6X 8X Kw* 2,2 7,5 4 15 7,5 18,5 18,5 Rpm 1450 2800 1450 2800 1450 1450 1450 Flow rate min. lt/1 150 150 400 400 500 750 700 Head m w.c. 9 29 11 41 17 29 22 Flow rate max. lt/1 500 1000 750 1750 1000 2000 3500 Head m w.c. 5 11 8 12 8 15 5 PUMPS FOR ABRASIVE FLUIDS High-efficiency results thanks to neodymium magnets Constant efficiency due to automatic cleaning systems High capacity 44 45