SU48 Aluminum Modular Keg Rack System All Aluminum Construction ITEM # MODEL # QTY PROJECT Large Keg Storage Capacities Heavy Duty Channel Keg Shelves Top Shelf for Added Storage Fully Welded Frame for Strength Custom Sizes and Layouts Available SU48-3352-2-AO SU48-3335-2 SU48-3366-2-AO
Features & Benefits Aluminum, Heavy-Duty, modular design allows assembly inside the cooler, and easy setup. 1.5 x 2 HD Aluminum tubular frame does not have coatings that can chip off or rust. Shelves bolted in place with 3/8 Stainless hardware, prevents shelf slippage compared with set-screws 4 Channel shelves with center reinforcement Standard Rear protective strap Standard Adjustable flanged feet allows for level installation Single keg and double keg deep units available 2, 3, and 4 keg wide standard shelf widths Custom sizes available to maximize cooler storage 2 shelf and 3 shelf designs to meet your storage needs: lower shelves for kegs, top shelf for small item storage Top Shelf 17 Deep standard with 4 E-Channel, Optional up to 24 Deep Top Shelf ADD-ON Shelves allow for convenient cooler builds for Straight runs. Minimize Uprights and Maximize Storage Specifications ADD-ON Unit BASE Unit Construction Constructed of Heavy-Duty extruded 6063 aluminum alloy. All components are fully welded. Grade 5 stainless steel hardware is included with each kit. Vertical Frame Supports 1.5 X 2 X.125 High strength aluminum all welded tubular construction. Rack Shelving Heavy-duty aluminum structural E-Channel, 4 wide..250 X 2 Aluminum flat bar center supports.
Units: Bottom kegsrest on floor, 39 3/4 Openingng between shelves, Standard 17 Deep Top Shelf on all units for Beer Cases and small food storage Base Unit Model Number Base Units SU48-1735-2 38 965 17 432 78 1981 4 68 31 1860 SU48-1752-2 55 1397 17 432 78 1981 6 80 36 1996 SU48-1769-2 72 1829 17 432 78 1981 8 90 41 2132 Length Depth Height in mm in mm in mm kegs lb kg $ SU48-3335-2 38 965 33 838 78 1981 8 86 39 2091 SU48-3352-2 55 1397 33 838 78 1981 12 106 48 2279 SU48-3369-2 72 1829 33 838 78 1981 16 120 55 2468 Model Number ADD-ON Units Length Depth Height in mm in mm in mm kegs lb kg $ ADD-ON SU48-1735-2-AO 37 940 17 432 78 1981 4 47 21 1539 SU48-1752-2-AO 54 1372 17 432 78 1981 6 59 27 1675 SU48-1769-2-AO 71 1803 17 432 78 1981 8 69 31 1811 SU48-3335-2-AO 37 940 33 838 78 1981 8 65 30 1708 SU48-3352-2-AO 54 1372 33 838 78 1981 12 85 39 1896 SU48-3369-2-AO 71 1803 33 838 78 1981 16 99 45 2085 NOTE: 2-Shelf ADD-ON Unit must be added to 2-Shelf Base Unit ADD-ON must be added to Base Unit ADD-ON must be added to Base Unit Upright for ADD-ON unit must be used as Center Upright
Units: Bottom Shelf Holds the kegs 8 off the floor, 32 ½ Opening between Shelves, Standard 17 Deep Top Shelf on all Units for Beer cases and small food storage Base Unit Model Number Base Units SU48-1735-3 38 965 17 432 78 1981 4 SU48-1752-3 55 1397 17 432 78 1981 6 SU48-1769-3 72 1829 17 432 78 1981 8 Length Depth Height in mm in mm in mm kegs lb kg $ SU48-3335-3 38 965 33 838 78 1981 8 79 36 2458 97 44 2647 112 51 2835 103 47 2764 SU48-3352-3 55 1397 33 838 78 1981 12 133 60 3057 SU48-3369-3 72 1829 33 838 78 1981 16 154 70 3351 Model Number ADD-ON Units Length in mm in Depth Height mm in mm kegs lb kg $ ADD-ON Unit SU48-1735-3-AO 37 940 17 SU48-1752-3-AO 54 1372 17 SU48-1769-3-AO 71 1803 17 432 78 1981 4 58 26 2049 432 78 1981 6 76 35 2238 432 78 1981 8 91 41 2426 SU48-3335-3-AO 37 940 33 SU48-3352-3-AO 54 1372 33 SU48-3369-3-AO 71 1803 33 838 78 1981 8 82 37 2312 838 78 1981 12 112 51 2605 838 78 1981 16 113 61 2899 NOTE: 3-Shelf ADD-ON Unit must be added to 3-Shelf Base Unit ADD-ON must be added to Base Unit ADD-ON must be added to Base Unit Upright for ADD-ON unit must be used as Center Upright
Modular Keg Rack Custom Solutions Center Top Shelf Contact Choice Equipment Company for custom Keg Rack Solutions Typical Custom Options Available: Custom fit to go around Inside corners or Outside corners Top Shelves up to 24 Deep to Increase Beer Case and small food storage Center Mounted Top Storage on double deep Units to allow easy access to Front and back Regulator Mounting Example #1: Custom Cooler Layout Maximize Storage with Inside and Outside Corner Units Each Unit is Interlocked for Strength and rigidity 136 Keg using 2 Shelf, Double Deep units Top Shelf 17 Deep along the entire length for storage of up to 62 Beer Cases Maintained Customer requirements for minimum openings Example #2: Custom Cornerr Unit Each Unit is Interlocked for Strength and rigidity Minimize Uprights and Maximize Keg Storage 17 Deep Top Shelf interlocked for strength and additional Beer Case storage 48 Keg using 2 Shelf and 3 Shelf, Double deep units as required. Standard Adjustable Feet Standard Rear Strap
TWO SHELF TWO SHELF DOUBLE DEEP LAYOUT SINGLE DEEP LAYOUT
THREE SHELF DOUBLE DEEP LAYOUT THREE SHELF SINGLE DEEP LAYOUT