MANUAL ROCKWELL HARDNESS TESTER CODE ISH-R150 indenter Ø60mm flat anvil stage test force dial Ø150mm flat anvil load/unload handle V-type anvil Hardness scale Preliminary test force Test force Display Stage elevation Load control Min. reading Max. workpiece height Max. workpiece depth HRA, HRB, HRC, HRD, HRF, HRG 98N 588N, 980N, 1471N analogue 0.5HR 170mm 165mm (from the center of indenter) 520 160 700mm 60kg Ø1.5875mm carbide ball indenter Ø60mm flat anvil Hardness test block HRB85-95 Ø150mm flat anvil Hardness test block HRC60-70 V-type anvil Hardness test block HRC20-30 Diamond indenter S1
AUTOMATIC ROCKWELL HARDNESS TESTER CODE ISH-MR150* indenter Ø60mm flat anvil stage test force dial Ø150mm flat anvil start button load dwell time adjustment V-type anvil Hardness scale Preliminary test force Test force Display Stage elevation Load control Load dwell time Min. reading Max. workpiece height Max. workpiece depth HRA, HRB, HRC, HRD, HRF, HRG 98N 588N, 980N, 1471N analogue automatic (load/dwell/unload) 1-99 second 0.5HR 170mm 165mm (from the center of indenter) 520 160 700mm 60kg Ø1.5875mm carbide ball indenter Ø60mm flat anvil Hardness test block HRB85-95 Ø150mm flat anvil Hardness test block HRC60-70 V-type anvil Hardness test block HRC20-30 Diamond indenter *Add suffix on code No. to devote AC voltage and plug (refer to page V1) S2
DIGITAL ROCKWELL HARDNESS TESTER CODE ISH-DR150* hardness scale test result print scale total test times load dwell time set zero PR SC No - LD H R 0 + - reset average value stage test force dial RS232C printer Ø60mm flat anvil Ø150mm flat anvil V-type anvil Hardness scale HRA, HRB, HRC, HRD, HRF, HRG Preliminary test force 98N Ø 60mm flat anvil Test force 588, 980, 1471N Ø 150mm flat anvil Stage elevation V-type anvil Load control automatic (load/dwell/unload) Ø1.5875mm carbide ball indenter Load dwell time Min. reading Data output 1-30second 0.1HR RS232C Diamond indenter Rockwell test block RS232C cable 3pcs Max. workpiece height Max. workpiece depth 170mm 130mm(from 8 the center of indenter) Anti-dust cover 510 212 730mm 8 *Add suffix on code No. to devote AC voltage and plug (refer to page V1) S3
DIGITAL MICRO-VICKERS HARDNESS TESTER CODE ISH-TDV2000* camera connector eyepiece image to eyepiece/camera switch X-Y stage 40X objective indenter 10X objective motor driven turret hardness value(hv) printer indentation diagonals test force load dwell time converted hardness value Measure hardness of thin or small workpieces Based on Vickers(HV), can be converted to Rockwell(HRA, HRB and HRC) slice holder Test force 0.01, 0.025, 0.05, 0.1, 0.2, 0.3, 0.5, 1, 2kgf Vickers scales HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1, HV2 vice Stage elevation Load control automatic (load/dwell/unload) Load dwel l time 5-60second (5 second increment) Objective Eyepiece 10X, 40X 15X cylinder holder Total magnification Max. workpiece height Max. workpiece depth X-Y stage 150X (for observation) 600X (for measurement) 85mm 85mm (from the center of indenter) dimensions: 100 100mm travel range: 25 25mm 10X, 40X objective Micro Vickers indenter Micro Vickers test block (700HV1, 400HV0.2) of each of each graduation: 0.01mm Slice holder Data output RS232C Vice 540 500 640mm Cylinder holder 50kg Level *Add suffix on code No. to devote AC voltage and plug (refer to page V1) S4
BRINELL/ROCKWELL/VICKERS HARDNESS TESTER CODE ISH-BRV* Rockwell display microscope for Vickers and Brinell 15X eyepiece graduation 0.01mm objective 2.5X/5X load/unload handle Ø60mm flat anvil for Rockwell Ø150mm flat anvil for Rockwell slider stage V-type anvil for Rockwell test force dial choose hardness scale Ø60mm flat anvil for Vickers and Brinell V-type anvil for Vickers and Brinell Rockwell test load Min. Rockwell reading Brinell test load Vickers test load Stage elevation Load control Magnification of microscope Max. workpiece height Max. workpiece depth 98N preload, 588, 980, 1471N total load 0.5HR 306, 613, 1839N 294N 37.5X/75X (selectable) 180mm 200mm(from the center of indenter) 546 300 767mm 90kg Ø1.5875mm carbide ball indenter Diamond Rockwell indenter Ø5mm Brinell indenter Ø2.5mm Brinell indenter Vickers indenter Ø60mm flat anvil for Rockwell Ø150mm flat anvil for Rockwell *Add suffix on code No. to devote AC voltage and plug (refer to page V1) V-anvil for Rockwell Flat anvil for Vickers and Brinell V-anvil for for Vickers and Brinell Rockwell test block HRC (high, low) Rockwell test block HRB Brinell test block V-anvil for Rockwell Vickers test block Anti-dust cover of each S5
PORTABLE HARDNESS TESTER CODE ISH-PHA* printer hardness test block Supplied with impact device D Based on Leeb(HLD), converted to Vickers(HV), Brinell(), Rockwell(HRC and HRB), Shore(HS) and tensile strength(mpa) Connected with printer via bluetooth LCD display with backlight Automatic power off According to ASTM A 956 small support ring Min. reading 1HLD, 1HV, 1, 0.1HRC, 0.1HRB, 1HS, 1MPa Accuracy ±6HLD(when HLD=800) Impact device D Display Leeb(HLD), converted hardness, material, impact direction, test times, average value, date Printer Hardness test block Output bluetooth Small support ring Cleaning brush minimum weight 2kg (on solid support) AC/DC adapter Applicable workpiece minimum thickness: 5mm 0.1kg(coupled on plate) minimum radius of curved surface: 11mm OPTIONAL ACCESSORY Support rings page S10 maximum roughness(ra): 1.6µ m Power supply 3 AAA batteries 150 80 24mm 200g 150 80 24mm APPLICABLE MATERIAL AND HARDNESS RANGE FOR IMPACT DEVICE D Material HLD HV HRC HRB HS Tensile strength(mpa) Steel & cast steel 300-900 81-955 81-654 20-68 38-100 32-100 375-2639 Tool steel 300-840 80-898 20-67 Stainless steel 300-800 85-802 85-655 46-101 Cast iron 360-650 93-334 Cast aluminum alloy 170-570 19-164 23-84 Brass 200-550 40-173 13-95 Bronze 300-700 60-290 Copper 200-690 45-315 *Add suffix on code No. to devote AC voltage and plug (refer to page V1) S6
PORTABLE HARDNESS TESTER CODE ISH-SPHA* printer hardness test block (standard) Based on Leeb(HL), converted to Vickers(HV), Brinell(), Rockwell(HRC and HRB), Shore(HS) and tensile strength(mpa) Connected with printer via bluetooth Connected with computer via USB port Up to 800 test results can be saved Low and high limits with judgement Touch screen operation, large display with backlight Language: English, Chinese, Italian, German, French and Russian Automatic power off According to ASTM A 956 small support ring Min. reading Accuracy Display Output Power supply 1HL, 1HV, 1, 0.1HRC, 0.1HRB, 1HS, 1MPa ±6HL (when HL=800) Leeb(HL), converted hardness, material, impact direction, test times, average value, deviation, time bluetooth and USB built-in rechargeable battery 135 83 24mm 350g Impact device D Printer Hardness test block Small support ring Cleaning brush AC/DC adapter USB cable and software disc Pen for touch screen of each OPTIONAL ACCESSORY Impact device DC Impact device C Impact device D+15 Impact device DL Impact device G Hardness test block Support rings ISH-SPHA-DC ISH-SPHA-C ISH-SPHA-D15 ISH-SPHA-DL ISH-SPHA-G ISH-B HLG ( page S13) page S10 * Hardness test block (ISH-BHLG) is for impact device G (ISH-SPHA-G). Hardness test block (standard) is for all others impact devices. *Add suffix on code No. to devote AC voltage and plug (refer to page V1) To be continued S7
Continued from page S7 DL D+ 15 depth<15mm Ød>4.5mm width>12mm DC Ød>100mm DC(optional) C (optional) D(included) D+15 (optional) DL (optional) G(optional) APPLICABLE WORKPIECE Impact device DC C D D+15 DL G Application inner wall of small space small or thin workpiece, coating layer general use deep groove narrow slot or small hole casting or forging workpiece Maximum roughness of workpiece(ra) 1.6µm 0.4µm 1.6µm 1.6µm 1.6µm 7µm Minimum weight of workpiece direct measurement on solid support coupled on plate 2kg 0.1kg 1. 0. 0.02kg 2kg 0.1kg 2kg 0.1kg 2kg 0.1kg 1 0. Minimum thickness of workpiece 5mm 1mm 5mm 5mm 5mm 10mm APPLICABLE MATERIAL AND HARDNESS RANGE Material Scale HRC HRB DC 20-68 38-100 Steel & cast steel 81-654 HV 81-955 HS 32-100 Tensile strength(mpa) 93-334 Cast iron HV HRC Tool steel HRC 20-67 HV 80-898 Stainless steel HRB HV 46-101 85-802 85-655 Cast aluminum alloy Brass 19-164 40-173 HRB HRB 23-84 13-95 Bronze Copper 60-290 45-315 C 20-69.5 38.4-99.5 80-683 80-996 32-102 D 20-68 38-100 81-654 81-955 32-100 375-2639 93-334 20-67 80-898 46-101 85-802 85-655 19-164 23-84 40-173 13-95 60-290 45-315 D+15 19.3-67.9 80-638 180-818 33-99 DL 20.6-68.2 37.0-99.9 81-646 80-950 31-97 G 47.7-99.9 90-646 92-326 S8
PORTABLE HARDNESS TESTER CODE ISH-SPHD* setting select test result printer test times total times average value material scale USB port power switch print hardness test block Impact device D Based on Leeb(HLD), converted to Vickers(HV), Brinell(), Rockwell(HRC and HRB), Shore(HS) and tensile strength(mpa) Automatic direction correction Connected with printer via bluetooth Connected with computer via USB port Up to 500 test results can be saved According to ASTM A 956 small support ring Min. reading Accuracy Output Applicable workpiece Power supply 1HLD, 1HV, 1, 0.1HRC, 0.1HRB, 1HS ±6HLD(when HLD=800) USB and bluetooth minimum weight minimum thickness: 5mm minimum radius of curved surface: 11mm built-in rechargeable battery 147 35 22mm APPLICABLE MATERIAL 150 65g AND HARDNESS 80 24mm RANGE 2kg (on solid support) 0.1kg(coupled on plate) maximum roughness(ra): 1.6µ m Printer Hardness test block Small support ring Cleaning brush AC/DC adapter USB cable and software disc OPTIONAL ACCESSORY Support rings of each page S10 APPLICABLE MATERIAL AND HARDNESS RANGE Material HLD HV HRC HRB HS Steel & cast steel 300-900 81-955 81-654 20-68 38-100 32-100 Tool steel 300-840 80-898 20-67 Stainless steel Cast iron 300-800 360-650 85-802 85-655 93-334 46-101 Cast aluminum alloy 170-570 19-164 23-84 Brass 200-550 40-173 13-95 Bronze 300-700 60-290 Copper 200-690 45-315 *Add suffix on code No. to devote AC voltage and plug (refer to page V1) S9
SUPPORT RINGS FOR PORTABLE HARDNESS TESTER type A R ISH-R1015 type B R ISH-R1113 type C SR ISH-SR1113 type D SR ISH-SR1015 type E R ISH-RUN Code Type Applicable workpiece Range (mm) ISH-R1015 R10-15 ISH-R14530 A cylindrical outside surface R14.5-30 ISH-R2550 R 25-50 ISH-R1113 R11-13 ISH-R12517 B cylindrical inside surface R12.5-17 ISH-R16530 R16.5-30 ISH-SR1113 SR11-13 ISH-SR12517 C spherical inside surface SR12.5-17 ISH-SR16530 SR16.5-30 ISH-SR1015 ISH-SR14530 D spherical outside surface SR10-15 SR14.5-30 ISH-RUN E cylindrical outside surface R > 10 S10
SHORE DUROMETER 35 Ø0.79mm ISH-SA blunt taper indenter 30 SR0.1mm sharp point indenter ISH-SD SR2.5mm ball indenter ISH-SC According to ISO868, ISO7619, ASTM D 2240 Optional accessory: hardness test block for ISH-SA(code ISH-B SA, page S13), testing stand(page S12) Code Scale ISH-SA Shore A ISH-SD Shore D ISH-SC Shore C Application natural rubber, soft elastomer, etc. hard elastomer, plastic, hard rubber, etc. foam, sponge, etc. Measuring range HA: 10-90 HD: 20-90 HW: 10-90 Resolution 1HA 1HD 1HW Indenter protrusion 2.5mm 2.5mm 2.5mm 115 60 25mm Net weight 500g S11
TESTING STAND FOR SHORE DUROMETER weight weight Durometer is not included Durometer is not included ISH-STAC ISH-STD Can perform repeatable hardness measurement due to fewer possibilities of human error or measurement variations Code Applicable durometer Stage diameter Maximum workpiece height Mass of weight ISH-STAC ISH-SA, ISH-SC Ø100mm 75mm 1kg ISH-STD ISH-SD Ø100mm 75mm S12
HARDNESS TEST BLOCK Rockwell Vickers Brinell Micro-Vickers Leeb Shore Code Type Hardness ISH-BHRC1 ISH-BHRC2 ISH-BHRC3 Rockwell C 25-35HRC 40-50HRC 55-65HRC ISH-BHRB Rockwell B 75-95HRB ISH-BHRA Rockwell A 70-85HRA ISH-BHV5A ISH-BHV5B ISH-BHV5C ISH-BHV10A ISH-BHV10B ISH-BHV30 ISH-B25A ISH-B25B ISH-B5A ISH-B5B ISH-B10A ISH-B10B ISH-BHV005 ISH-BHV01A ISH-BHV01B ISH-BHV02A ISH-BHV02B ISH-BHV05 ISH-BHV1 Vickers Brinell Micro-Vickers 150-250HV5 400-500HV5 650-750HV5 400-500HV10 650-750HV10 400-500HV30 75-125W 2.5/62.5 150-250W 2.5/187.5 75-125W 5/250 150-250W 5/750 75-125W 10/1000 150-250W 10/3000 200-300HV0. 05 200-300HV0.1 400-500HV0.1 400-500HV0.2 700-800HV0.2 700-800HV0.5 700-800HV1 ISH-BHLD 750-830HLD, 750-830HLDC, 872-916HLDL, 757-833HLD+15, 812-889HLC Leeb ISH-BHLG 550-630HLG ISH-BSA Shore A 7pcs/set: 30-39HA, 40-49HA, 50-59HA, 60-69HA, 70-79HA, 80-89HA, 90-99HA S13