simply unique. MA Series 5.25 or 6.5 7/25V Commercial ABS Plastic Back Can Speakers SP5MAT SP6MAT 5.25 speaker 6.5 speaker Features Speco Technologies Multi-Application Series was designed to make the contractor s work as easy and time-efficient as possible. Our all-in-one unit comes pre-assembled with back can and mounted transformer. It features a quick-flip 7 or 25 Volt selector switch and an easy-select transformer wattage dial. The choice of 8 or 9 individual wattage tap settings covers a complete range of uses. This flame-retardant ABS unit also comes with insulated wires, has an attached metal seismic safety loop and built-in easy mount tabs for securing the unit. The MA Series is the ideal, all-purpose value speaker covering a wide range of commercial applications. The furnished 8 Ohm tap selector also means the speakers can be kept on-hand for unexpected residential installation needs. sold individually Specifications SP5MAT SP6MAT Frequency Response Range... 57Hz 2kHz 34Hz 2kHz Low Frequency Driver... 5.25 Polypropylene woofer 6.5 Polypropylene woofer... with rubber surround with rubber surround Low Frequency Magnet... 1 oz. ferrite 11.6 oz. ferrite High Frequency Driver... 1 Coaxially mounted 1 Coaxially mounted... mylar dome tweeter mylar dome tweeter Sensitivity... 87dB (1/1M) 88dB (1/1M) Impedance... 8 Ohms, 7/25V 8 Ohms, 7/25V RMS Power... 3 4 Max. Power... 6 8 Transformer Setting...3, 15, 7.5, 5, 2.5, 4, 3, 15, 7.5, 5, 2.5, 1,.5,.25 & 8 Ohms 1,.5,.25 & 8 Ohms Baffle Material... Fire-resistant ABS Fire-resistant ABS Back Can Material... Fire-resistant ABS Fire-resistant ABS Grille Material... Metal Metal ire Connection Type... Push Terminal Push Terminal eight... 4.5 lbs. 5.5 lbs. Cut-Out Dimensions... 8.38 9.88 Minimum Mounting Depth... 5.6 7 Dimensions... 9.43 (Dia.) x 6.12 (D) 11.2 (Dia.) x 7.58 (D) Optional Mounting Bracket... BRC6F (sold in pairs) BRC8F (sold in pairs) Speco Technologies is constantly developing and improving products. e reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 3/22/13 For more information contact Speco Technologies
simply unique. MA Series 5.25 7/25V Commercial ABS Plastic Back Can Speakers Architect & Engineer Specifications / SP5MAT The loudspeaker system shall be Speco Technologies SP5MAT. System shall include a high performance 5.25 coaxial loudspeaker, ported bass reflex enclosure and press-fit grille for conventional ceiling installation. The total frequency response for the system shall be 57 Hz 2 khz. Sensitivity shall be 87dB average. Loudspeaker shall be comprised of a 5.25 coaxial cone type driver. Cone shall be constructed of polypropylene with a rubber surround. The 1 tweeter shall be constructed of Mylar. Magnet shall be Ferrite and a minimum of 1 oz. Transformer shall be a 7.7V / 25V type with.25,.5, 1., 2.5, 5., 7.5, 15., and 3. watt primary taps (@7.7V) with a front mounted tap selector switch to include transformer bypass setting for 8Ω direct coupled operation. Enclosure shall be a flame-retardant ABS Plastic enclosure design. External wiring shall be accomplished via press-terminals to provide both secure wire termination and fast installation of wires. Seismic support eye shall be provided on side of enclosure for additional suspension point when used in drop tile ceilings. The mounting system shall be Speco Technologies BRC6F and include a support backing plate to reinforce the ceiling material and tile support rails for use on either 2 x 4 or 2 x 2 suspended ceiling tiles. This assembly can all be installed from beneath the ceiling tile. Overall front face diameter shall not exceed 9.43 ; overall depth from the bottom of the ceiling shall not exceed 6.12. Grilles shall be press-fit, manufactured from 24-gauge perforated steel mesh and finished in white epoxy. Round grill shall be 8.5 diameter. The loudspeaker shall be the Speco Technologies SP5MAT.
15 2.5.25 4 SP5MAT HD DVR Specifications Product Dimensions 6.12.65 red terminal black terminal 7.26 7.48 25V 7V speco technologies TM 8.5 9.43 3 7.5 5. 1. 8.5.79.44.28 dbr Ratio vs Angle 9-1 -2 15 12 6 3 Curve Freq B Q DI 441.94 35 1.2.7 625. 225 1.6 2. 883.88 36 1.. 1.25K 116 3.1 4.9 1.77K 113 3.2 5. 2.5K 156 2.3 3.6 3.54K 95 3.8 5.8-18 Deg 5.K 65 5.5 7.4 7.7K 65 5.5 7.4 1.K 15 3.4 5.3 14.14K 69 5.2 7.2 2.K 4 9. 9.5 28.28K 4 9. 9.5 4.K 4 9. 9.5-2 -1-12 -6-9 Map 38: PolarConv F= 441.9417 39: PolarConv F= 625. 4: PolarConv F= 883.8835 41: PolarConv F= 1.25K 42: PolarConv F= 1.7678K 43: PolarConv F= 2.5K 44: PolarConv F= 3.5355K 45: PolarConv F= 5.K 46: PolarConv F= 7.711K 47: PolarConv F= 1.K 48: PolarConv F= 14.1421K 49: PolarConv F= 2.K 5: PolarConv F= 28.2843K 51: PolarConv F= 4.K
SP5MAT Total Harmonic Distortion
simply unique. MA Series 6.5 7/25V Commercial ABS Plastic Back Can Speakers Architect & Engineer Specifications / SP6MAT The loudspeaker system shall be Speco Technologies SP6MAT. System shall include a high performance 6.5 coaxial loudspeaker, ported bass reflex enclosure and press-fit grille for conventional ceiling installation. The total frequency response for the system shall be 34 Hz 2 khz. Sensitivity shall be 88dB average. Loudspeaker shall be comprised of a 6.5 coaxial cone type driver. Cone shall be constructed of polypropylene with a rubber surround. The 1 tweeter shall be constructed of Mylar. Magnet shall be Ferrite and a minimum of 11 oz. Transformer shall be a 7.7V / 25V type with.25,.5, 1., 2.5, 5., 7.5, 15., 3. and 4. watt primary taps (@7.7V) with a front mounted tap selector switch to include transformer bypass setting for 8Ω direct coupled operation. Enclosure shall be a flame-retardant ABS Plastic enclosure design. External wiring shall be accomplished via press-terminals to provide both secure wire termination and fast installation of wires. Seismic support eye shall be provided on side of enclosure for additional suspension point when used in drop tile ceilings. The mounting system shall be Speco Technologies BRC8F and include a support backing plate to reinforce the ceiling material and tile support rails for use on either 2 x 4 or 2 x 2 suspended ceiling tiles. This assembly can all be installed from beneath the ceiling tile. Overall front face diameter shall not exceed 11 ; overall depth from the bottom of the ceiling shall not exceed 7.58. Grilles shall be press-fit, manufactured from 24-gauge perforated steel mesh and finished in white epoxy. Round grill shall be 9.69 diameter. The loudspeaker shall be the Speco Technologies SP6MAT.
2.5.5 SP6MAT Product Dimensions 7.58.63 8.82 8.94 red terminal black terminal 25V 7V speco technologies TM 9.69 11.2 3 15 7.5 4 5. 1. 8.25.89.45.28 dbr Ratio vs Angle 9-1 -2 15 12 6 3 Curve Freq B Q DI 441.94 215 1.7 2.2 625. 229 1.6 2. 883.88 12 3. 4.8 1.25K 113 3.2 5. 1.77K 16 2.3 3.5 2.5K 12 3.5 5.5 3.54K 65 5.5 7.4-18 Deg 5.K 51 7.1 8.5 7.7K 47 7.6 8.8 1.K 95 3.8 5.8 14.14K 73 5. 6.9 2.K 36 9.9 1. 28.28K 36 9.9 1. 4.K 36 9.9 1. -2-1 -12-6 -9 Map 38: PolarConv F= 441.9417 39: PolarConv F= 625. 4: PolarConv F= 883.8835 41: PolarConv F= 1.25K 42: PolarConv F= 1.7678K 43: PolarConv F= 2.5K 44: PolarConv F= 3.5355K 45: PolarConv F= 5.K 46: PolarConv F= 7.711K 47: PolarConv F= 1.K 48: PolarConv F= 14.1421K 49: PolarConv F= 2.K 5: PolarConv F= 28.2843K 51: PolarConv F= 4.K
SP6MAT Total Harmonic Distortion